centos7安装kubernetes1.18.5
一、设置hosts
修改主机名
[root@localhost kubernetes]# hostnamectl set-hostname master69
四台服务器安装kebernetes,一个master节点和三个node节点(一主三从)
master69 172.28.18.69 master69.kubernetes.blockchain.hl95.com
node120 172.28.5.120 node120.kubernetes.blockchain.hl95.com
node124 172.28.5.124 node124.kubernetes.blockchain.hl95.com
node125 172.28.5.125 node125.kunernetes.blockchain.hl95.com
[root@localhost hl95-network]# vim /etc/hosts
172.28.18.69 master69.kubernetes.blockchain.hl95.com
172.28.5.120 noe120.kubernetes.blockchain.hl95.com
172.28.5.124 node124.kubernetes.blockchain.hl95.com
172.28.5.125 node125.kubernetes.blockchain.hl95.com
二、开启时钟同步服务
[root@redis-02 ~]# systemctl start chronyd
三、关闭防火墙服务
[root@redis-02 ~]# systemctl stop firewalld
四、关闭SELinux
[root@redis-02 ~]# setenforce 0
setenforce: SELinux is disabled
[root@redis-02 ~]# vim /etc/selinux/config
SELINUX=disabled
五、关闭swap
[root@redis-02 ~]# swapoff -a
[root@redis-02 ~]# free -m
total used free shared buff/cache available
Mem: 32124 9966 9391 121 12766 21459
Swap: 0 0 0
[root@redis-02 ~]#
永久设置
编辑/etc/fstab文件,注释掉swap行
[root@redis-02 ~]# vim /etc/fstab
/dev/mapper/centos-root / xfs defaults 0 0
UUID=a9fdc7b9-2613-4a87-a250-3fabafa3ff5e /boot xfs defaults 0 0
/dev/mapper/centos-home /home xfs defaults 0 0
#/dev/mapper/centos-swap swap swap defaults 0 0
六、准备ipvs环境
[root@localhost kubernetes]# modprobe ip_vs
[root@localhost kubernetes]# modprobe ip_vs_rr
[root@localhost kubernetes]# modprobe ip_vs_wrr
[root@localhost kubernetes]# modprobe ip_vs_sh
[root@localhost kubernetes]# modprobe nf_conntrack_ipv4
[root@localhost kubernetes]# lsmod |grep ip_vs
ip_vs_sh 12688 0
ip_vs_wrr 12697 0
ip_vs_rr 12600 0
ip_vs 145497 6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack 139224 9 ip_vs,nf_nat,nf_nat_ipv4,nf_nat_ipv6,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_netlink,nf_conntrack_ipv4,nf_conntrack_ipv6
libcrc32c 12644 4 xfs,ip_vs,nf_nat,nf_conntrack
七、修改docker 开机自启动以及的cgroupdriver为systemd
[root@localhost kubernetes]# vim /etc/docker/daemon.json
"exec-opts": ["native.cgroupdriver=systemd"]
重启docker服务,查看
[root@localhost kubernetes]# systemctl restart docker
[root@localhost kubernetes]# docker info|grep Cgroup
Cgroup Driver: systemd
[root@localhost kubernetes]#
[root@redis-02 kubernetes]# systemctl enable docker
八、配置kubernetes.repo
阿里源
[root@redis-02 ~]# vim /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=kubernetes Repo
enabled=1
gpgcheck=1
repo_gpgcheck=1
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
九、安装kubelet kubeadm kubectl 1.18.5版本
这里安装指定版本1.18.5,如果不指定版本则安装最新的1.20.1版本,这个版本在 centos7.7上测试不通过
[root@redis-02 ~]# yum install kubelet-1.18.5 kubeadm-1.18.5 kubectl-1.18.5 -y
确保在此步骤之前已加载了 br_netfilter
模块。这可以通过运行 lsmod | grep br_netfilter
来完成。要显示加载它,请调用 modprobe br_netfilter
。
[root@redis-02 ~]# lsmod|grep br_netfilter
br_netfilter 22256 0
bridge 146976 1 br_netfilter
[root@redis-02 ~]# modprobe br_netfilter
[root@redis-02 ~]#
十、配置/etc/sysctl.d/k8s.conf文件
[root@redis-02 ~]# vim /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables=1
net.bridge.bridge-nf-call-iptables=1
[root@redis-02 ~]# sysctl --system
十一、设置ip_forward
[root@redis-02 ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
十二、设置kubelet开机自启动
[root@redis-02 ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@redis-02 ~]#
十三、查看所需镜像列表,并下载相关镜像
[root@redis-02 ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@redis-02 ~]# kubeadm config images list
k8s.gcr.io/kube-apiserver:v1.18.5
k8s.gcr.io/kube-controller-manager:v1.18.5
k8s.gcr.io/kube-scheduler:v1.18.5
k8s.gcr.io/kube-proxy:v1.18.5
k8s.gcr.io/pause:3.2
k8s.gcr.io/etcd:3.4.3-0
k8s.gcr.io/coredns:1.6.7
[root@redis-02 ~]#
在master节点172.28.18.69上下载以下镜像
由于k8s.gcr.io k8s镜像默认下载不了,需要通过docker hub 进行下载
[root@redis-02 ~]# docker pull mirrorgcrio/kube-apiserver:v1.18.5
[root@redis-02 ~]# docker pull mirrorgcrio/kube-controller-manager:v1.18.5
[root@redis-02 ~]# docker pull mirrorgcrio/kube-scheduler:v1.18.5
[root@redis-02 ~]# docker pull mirrorgcrio/kube-proxy:v1.18.5
[root@redis-02 ~]# docker pull mirrorgcrio/pause:3.2
[root@redis-02 ~]# docker pull mirrorgcrio/etcd:3.4.3-0
[root@redis-02 ~]# docker pull mirrorgcrio/coredns:1.6.7
将下载的镜像重新打上k8s.gcr.io的tag
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/kube-apiserver:v1.18.5 k8s.gcr.io/kube-apiserver:v1.18.5
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/kube-controller-manager:v1.18.5 k8s.gcr.io/kube-controller-manager:v1.18.5
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/kube-scheduler:v1.18.5 k8s.gcr.io/kube-scheduler:v1.18.5
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/kube-proxy:v1.18.5 k8s.gcr.io/kube-proxy:v1.18.5
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/etcd:3.4.3-0 k8s.gcr.io/etcd:3.4.3-0
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/coredns:1.6.7 k8s.gcr.io/coredns:1.6.7
[root@localhost blockchain-explorer]# docker tag mirrorgcrio/pause:3.2 k8s.gcr.io/pause:3.2
删除之前的镜像
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/kube-apiserver:v1.18.5
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/kube-controller-manager:v1.18.5
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/kube-scheduler:v1.18.5
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/kube-proxy:v1.18.5
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/etcd:3.4.3-0
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/coredns:1.6.7
[root@localhost blockchain-explorer]# docker rmi -f mirrorgcrio/pause:3.2
最终镜像列表
[root@localhost kubernetes]# docker images|grep k8s.gcr.io
k8s.gcr.io/kube-proxy v1.18.5 a1daed4e2b60 6 months ago 117MB
k8s.gcr.io/kube-apiserver v1.18.5 08ca24f16874 6 months ago 173MB
k8s.gcr.io/kube-controller-manager v1.18.5 8d69eaf196dc 6 months ago 162MB
k8s.gcr.io/kube-scheduler v1.18.5 39d887c6621d 6 months ago 95.3MB
k8s.gcr.io/pause 3.2 80d28bedfe5d 10 months ago 683kB
k8s.gcr.io/coredns 1.6.7 67da37a9a360 11 months ago 43.8MB
k8s.gcr.io/etcd 3.4.3-0 303ce5db0e90 14 months ago 288MB
worker node节点只需要安装kube-proxy和coredns以及pause
[root@redis-02 ~]# docker images|grep k8s.gcr.io
k8s.gcr.io/pause 3.2 80d28bedfe5d 10 months ago 683kB
k8s.gcr.io/kube-proxy v1.20.0 cb2b1b8da1eb 4 years ago 166MB
k8s.gcr.io/coredns 1.6.7 67da37a9a360 11 months ago 43.8MB
[root@redis-02 ~]#
十四、导出初始化集群的配置文件
[root@localhost kubernetes]# kubeadm config print init-defaults>kubeadm.yaml
修改相应的配置
[root@localhost kubernetes]# vim kubeadm.yaml
advertiseAddress: 172.28.18.69
dnsDomain: master69.kubernetes.blockchain.hl95.com
podSubnet: 10.244.0.0/16
serviceSubnet: 10.96.0.0/12
kubernetesVersion: v1.18.5
十五、初始化集群
在master节点运行
[root@localhost kubernetes]# kubeadm init --config=kubeadm.yaml
W0103 21:14:22.685612 1255 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]
[init] Using Kubernetes version: v1.18.5
[preflight] Running pre-flight checks
[WARNING Firewalld]: firewalld is active, please ensure ports [6443 10250] are open or your cluster may not function correctly
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [localhost kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.28.18.69]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [localhost localhost] and IPs [172.28.18.69 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [localhost localhost] and IPs [172.28.18.69 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
W0103 21:14:36.238987 1255 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[control-plane] Creating static Pod manifest for "kube-scheduler"
W0103 21:14:36.240883 1255 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.
[apiclient] All control plane components are healthy after 175.091427 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.18" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node localhost as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node localhost as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 172.28.18.69:6443 --token abcdef.0123456789abcdef \
--discovery-token-ca-cert-hash sha256:bb92e76902047bab95904938f94684430c282fd7091c67139bcf998984e00208
按要求依次运行
[root@localhost ~]# mkdir -p $HOME/.kube
[root@localhost ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@localhost ~]# chown $(id -u):$(id -g) $HOME/.kube/config
如果初始化失败,需要重启重新初始化集群,那么先执行kubeadm reset -f ,清空集群数据
[root@localhost blockchain-explorer]# kubeadm reset -f
再执行init
十六、查看节点
[root@localhost kubernetes]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
localhost NotReady master 4m8s v1.18.5
此时有一个master节点,状态为NotReady,因为我们还没有安装网络插件
查看集群状态
[root@localhost kubernetes]# kubectl get cs
NAME STATUS MESSAGE ERROR
etcd-0 Healthy {"health":"true"}
scheduler Healthy ok
controller-manager Healthy ok
[root@localhost kubernetes]#
查看系统pods
[root@localhost kubernetes]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-66bff467f8-6xkqw 0/1 Pending 0 5m40s
coredns-66bff467f8-lhrf2 0/1 Pending 0 5m40s
etcd-localhost 1/1 Running 0 5m48s
kube-apiserver-localhost 1/1 Running 0 5m48s
kube-controller-manager-localhost 1/1 Running 0 5m48s
kube-proxy-2qmxm 1/1 Running 0 5m40s
kube-scheduler-localhost 1/1 Running 0 5m48s
十七、安装网络插件flannel
下载flannel.yml文件直接通过kubectl命令安装
[root@localhost kubernetes]# curl -k -O https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
如果报错:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:05 --:--:-- 0curl: (7) Failed connect to raw.githubusercontent.com:443; 拒绝连接
则添加域名解析到hosts文件中
[root@localhost kubernetes]# vim /etc/hosts
199.232.96.133 raw.githubusercontent.com
[root@localhost kubernetes]# curl -k -O https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 4821 100 4821 0 0 4600 0 0:00:01 0:00:01 --:--:-- 4600
[root@localhost kubernetes]#
安装flannel
[root@localhost kubernetes]# kubectl apply -f kube-flannel.yml
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
[root@localhost kubernetes]#
再次查看节点
[root@localhost etcd]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
localhost Ready master 19m v1.18.5
已经是Ready状态,查看系统pods
[root@localhost etcd]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-66bff467f8-6xkqw 1/1 Running 0 19m
coredns-66bff467f8-lhrf2 1/1 Running 0 19m
etcd-localhost 1/1 Running 0 19m
kube-apiserver-localhost 1/1 Running 0 19m
kube-controller-manager-localhost 1/1 Running 0 19m
kube-flannel-ds-fctp9 1/1 Running 0 5m26s
kube-proxy-2qmxm 1/1 Running 0 19m
kube-scheduler-localhost 1/1 Running 0 19m
kube-flannel已经运行,各个pods都是running状态
此时,集群的master节点配置完毕,
十八、node节点安装kube-proxy和pause镜像
[root@redis-03 ~]# docker images|grep k8s
k8s.gcr.io/kube-proxy v1.18.5 a1daed4e2b60 6 months ago 117MB
k8s.gcr.io/pause 3.2 80d28bedfe5d 10 months ago 683kB
十九、复制master节点/run/flannel/subnet.env到各个slave node节点
[root@localhost kubernetes]# scp -P25601 /run/flannel/subnet.env root@172.28.5.120:/run/flannel/
[root@localhost kubernetes]# scp -P25601 /run/flannel/subnet.env root@172.28.5.124:/run/flannel/
[root@localhost kubernetes]# scp -P25601 /run/flannel/subnet.env root@172.28.5.125:/run/flannel/
二十、增加node节点
使用前面初始化完成后输出的kubeadm join命令在node节点上执行,就完成了node节点加入集群的操作
[root@redis-01 kubernetes]# kubeadm join 172.28.18.69:6443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:bb92e76902047bab95904938f94684430c282fd7091c67139bcf998984e00208
W0104 15:47:23.782612 34832 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.
[preflight] Running pre-flight checks
[WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
[WARNING Hostname]: hostname "redis-01.hlqxt" could not be reached
[WARNING Hostname]: hostname "redis-01.hlqxt": lookup redis-01.hlqxt on 202.106.0.20:53: no such host
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap... This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details. Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
三台node节点都运行kubeadm join,然后在master查看节点状态
[root@localhost kubernetes]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
localhost Ready master 5h6m v1.18.5
redis-01.hlqxt Ready <none> 48m v1.18.5
redis-02.hlqxt Ready <none> 2m8s v1.18.5
redis-03.hlqxt Ready <none> 2m30s v1.18.5
master查看系统pod
[root@localhost kubernetes]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-66bff467f8-95n7v 1/1 Running 0 5h6m
coredns-66bff467f8-vhg9r 1/1 Running 0 5h6m
etcd-localhost 1/1 Running 0 5h7m
kube-apiserver-localhost 1/1 Running 0 5h7m
kube-controller-manager-localhost 1/1 Running 0 5h7m
kube-flannel-ds-8bx7f 1/1 Running 0 49m
kube-flannel-ds-drfqk 1/1 Running 0 2m53s
kube-flannel-ds-hx4tk 1/1 Running 0 3m15s
kube-flannel-ds-spl2l 1/1 Running 0 5h4m
kube-proxy-72bhk 1/1 Running 0 2m53s
kube-proxy-jft52 1/1 Running 0 3m15s
kube-proxy-lpt8q 1/1 Running 0 49m
kube-proxy-r9hwc 1/1 Running 0 5h6m
kube-scheduler-localhost 1/1 Running 0 5h7m
node节点运行有kube-proxy,kube-flannel,k8s.gcr.io/pause:3.2三个容器
二十一、kube-proxy开启ipvs
[root@localhost kubernetes]# kubectl edit configmap kube-proxy -n kube-system
将mode: ""改为mode: "ipvs"
mode: "ipvs"
保存退出,删除kube-system下的kube-proxy,会自动重启
[root@localhost kubernetes]# kubectl delete pod $(kubectl get pods -n kube-system|grep kube-proxy|awk '{print $1}') -n kube-system
pod "kube-proxy-72bhk" deleted
pod "kube-proxy-jft52" deleted
pod "kube-proxy-lpt8q" deleted
pod "kube-proxy-r9hwc" deleted
[root@localhost kubernetes]# kubectl get pods -n kube-system|grep kube-proxy
kube-proxy-2564b 1/1 Running 0 13s
kube-proxy-jltvv 1/1 Running 0 20s
kube-proxy-kdv62 1/1 Running 0 16s
kube-proxy-slgcq
查看proxy日志
[root@localhost kubernetes]# kubectl logs -f kube-proxy-2564b -n kube-system
I0106 01:36:04.729433 1 node.go:136] Successfully retrieved node IP: 172.28.5.120
I0106 01:36:04.729498 1 server_others.go:259] Using ipvs Proxier.
W0106 01:36:04.729899 1 proxier.go:429] IPVS scheduler not specified, use rr by default
I0106 01:36:04.730189 1 server.go:583] Version: v1.18.5
I0106 01:36:04.730753 1 conntrack.go:52] Setting nf_conntrack_max to 131072
I0106 01:36:04.731044 1 config.go:133] Starting endpoints config controller
I0106 01:36:04.731084 1 shared_informer.go:223] Waiting for caches to sync for endpoints config
I0106 01:36:04.731095 1 config.go:315] Starting service config controller
I0106 01:36:04.731110 1 shared_informer.go:223] Waiting for caches to sync for service config
I0106 01:36:04.831234 1 shared_informer.go:230] Caches are synced for endpoints config
I0106 01:36:04.831262 1 shared_informer.go:230] Caches are synced for service config
Using ipvs Proxier说明已经启用的ipvs,每个node节点也如此操作
至此,kubernetes集群就搭建起来了,下面我们来新建一个nginx的demo,创建一个pod副本为2,这样master节点将随机选择两个node节点来运行nginx 容器,保证2个nginx同时运行
Deployment、ReplicaSet 和 Pod 之间的关系 —— 层层隶属;以及这些资源和 namespace 的关系是 —— 隶属。如下图所示
1、创建deployment和pod
[root@redis-02 kubernetes]# mkdir nginx-demo
[root@localhost kubernetes]# vim nginx-demo/nginx-demo-deployment.yaml
apiVersion: apps/v1 #版本号
kind: Deployment
metadata:
labels:
app: nginx-k8s-demo
name: nginx-demo-deployment
spec:
replicas: 2 #副本数
selector:
matchLabels:
app: nginx-k8s-demo
template: #定义pod模板
metadata:
labels:
app: nginx-k8s-demo
spec:
containers:
- image: docker.io/nginx:latest
name: nginx-k8s-demo
ports:
- containerPort: 80 #对service暴露的端口
创建
[root@localhost kubernetes]# kubectl create -f nginx-demo/nginx-demo-deployment.yaml
deployment.apps/nginx-demo-deployment created
[root@localhost kubernetes]#
2、查看deployment
[root@localhost nginx-demo]# kubectl get deployment -n default -o wide
NAME READY UP-TO-DATE AVAILABLE AGE CONTAINERS IMAGES SELECTOR
nginx-demo-deployment 2/2 2 2 5h11m nginx-k8s-demo docker.io/nginx:latest app=nginx-k8s-demo
3、查看replica set副本集
[root@localhost log]# kubectl get replicaset -o wide
NAME DESIRED CURRENT READY AGE CONTAINERS IMAGES SELECTOR
nginx-demo-deployment-59fbc48594 2 2 2 9h nginx-k8s-demo docker.io/nginx:latest app=nginx-k8s-demo,pod-template-hash=59fbc48594
4、查看pods
[root@localhost nginx-demo]# kubectl get pods -n default -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-demo-deployment-59fbc48594-2dr7k 1/1 Running 0 5h9m 10.244.3.2 redis-03.hlqxt <none> <none>
nginx-demo-deployment-59fbc48594-xw6bq 1/1 Running 0 5h9m 10.244.4.2 redis-02.hlqxt <none> <none>
2个pods在运行状态,分别部署在2个不同的node节点上
5、查看pod详情
[root@localhost log]# kubectl describe pods nginx-demo-deployment-59fbc48594-2x26z
Name: nginx-demo-deployment-59fbc48594-2x26z
Namespace: default
Priority: 0
Node: redis-01.hlqxt/172.28.5.120
Start Time: Mon, 04 Jan 2021 23:55:28 +0800
Labels: app=nginx-k8s-demo
pod-template-hash=59fbc48594
Annotations: <none>
Status: Running
IP: 10.244.2.2
IPs:
IP: 10.244.2.2
Controlled By: ReplicaSet/nginx-demo-deployment-59fbc48594
Containers:
nginx-k8s-demo:
Container ID: docker://a932b856f0d6422fb8c22e1702f5640e5dc333a32576c57d80a4de3a4507fa54
Image: docker.io/nginx:latest
Image ID: docker-pullable://nginx@sha256:4cf620a5c81390ee209398ecc18e5fb9dd0f5155cd82adcbae532fec94006fb9
Port: 80/TCP
Host Port: 0/TCP
State: Running
Started: Mon, 04 Jan 2021 23:55:47 +0800
Ready: True
Restart Count: 0
Environment: <none>
Mounts:
/var/run/secrets/kubernetes.io/serviceaccount from default-token-b9k9b (ro)
Conditions:
Type Status
Initialized True
Ready True
ContainersReady True
PodScheduled True
Volumes:
default-token-b9k9b:
Type: Secret (a volume populated by a Secret)
SecretName: default-token-b9k9b
Optional: false
QoS Class: BestEffort
Node-Selectors: <none>
Tolerations: node.kubernetes.io/not-ready:NoExecute for 300s
node.kubernetes.io/unreachable:NoExecute for 300s
Events: <none>
6、创建service
[root@localhost kubernetes]# vim nginx-demo/nginx-demo-service.yaml
apiVersion: v1
kind: Service
metadata:
name: nginx-demo-service
spec:
selector:
app: nginx-k8s-demo
ports:
- name: http
protocol: TCP
port: 81 #pod端口
targetPort: 80 #nginx端口
nodePort: 30001 #service端口
type: NodePort
[root@localhost nginx-demo]# kubectl create -f nginx-demo-service.yaml
service/nginx-demo-service created
[root@localhost nginx-demo]#
7、查看service详情
[root@localhost nginx-demo]# kubectl describe service nginx-demo-service
Name: nginx-demo-service
Namespace: default
Labels: <none>
Annotations: Selector: app=nginx-k8s-demo
Type: NodePort
IP: 10.107.6.219
Port: http 81/TCP
TargetPort: 80/TCP
NodePort: http 30001/TCP
Endpoints: 10.244.2.2:80,10.244.4.3:80
Session Affinity: None
External Traffic Policy: Cluster
Events: <none>
8、查看service
[root@localhost nginx-demo]# kubectl get svc -n default -o wide
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE SELECTOR
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 11h <none>
nginx-demo-service NodePort 10.106.28.201 <none> 81:30001/TCP 4m59s app=nginx-k8s-demo
可通过ipvsadm -Ln|grep 10.106.28.201 -C 5 来查看service的负载均衡配置
[root@master69 etcd-v3.4.14-linux-amd64]# ipvsadm -Ln|grep 10.106.28.201 -A 3
TCP 10.106.28.201:81 rr
-> 10.244.3.2:80 Masq 1 0 0
-> 10.244.4.2:80 Masq 1 0 0
在其他服务器上访问访问master节点ip:30001
[root@redis-01 kubernetes]# curl 172.28.18.69:30001
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p> <p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p> <p><em>Thank you for using nginx.</em></p>
</body>
</html>
成功访问nginx
9、编辑服务
两种办法:
修改 yaml 文件后通过 kubectl 更新,例如:
修改deployment配置里的副本集为3
[root@localhost nginx-demo]# vim nginx-demo-deployment.yaml
replicas: 3 #副本数
更新deployment
[root@localhost nginx-demo]# kubectl apply -f nginx-demo-deployment.yaml
deployment.apps/nginx-demo-deployment configured
[root@localhost nginx-demo]
查看replica set副本集
[root@localhost nginx-demo]# kubectl get replicaset
NAME DESIRED CURRENT READY AGE
nginx-demo-deployment-59fbc48594 3 3 3 9h
已经变了3个了
查看pods,3个
[root@localhost nginx-demo]# kubectl get pods -n default
NAME READY STATUS RESTARTS AGE
nginx-demo-deployment-59fbc48594-mhjx8 1/1 Running 0 25m
nginx-demo-deployment-59fbc48594-wrqv6 1/1 Running 0 60s
nginx-demo-deployment-59fbc48594-zwpb5 1/1 Running 0 24m
通过 kubectl edit 直接编辑 Kubernetes 上的资源,例如:编辑deployment,将副本集改为2
[root@localhost nginx-demo]# kubectl edit deployment nginx-demo-deployment
f:terminationGracePeriodSeconds: {}
manager: kubectl
operation: Update
time: "2021-01-05T01:43:02Z"
name: nginx-demo-deployment
namespace: default
resourceVersion: "194731"
selfLink: /apis/apps/v1/namespaces/default/deployments/nginx-demo-deployment
uid: e87087a3-c091-4fea-94a0-36a2ab793877
spec:
progressDeadlineSeconds: 600
replicas: 2
revisionHistoryLimit: 10
selector:
matchLabels:
app: nginx-k8s-demo
strategy:
rollingUpdate:
maxSurge: 25%
maxUnavailable: 25%
type: RollingUpdate
template:
metadata:
creationTimestamp: null
labels:
app: nginx-k8s-demo
spec:
containers:
- image: docker.io/nginx:latest
imagePullPolicy: Always
name: nginx-k8s-demo
ports:
- containerPort: 80
protocol: TCP
resources: {}
修改上面的replicas: 2,改为3,保存退出
.: {}
"/tmp/kubectl-edit-jn880.yaml" 159L, 4857C written
deployment.apps/nginx-demo-deployment edited
[root@localhost nginx-demo]#
查看replica set
[root@localhost nginx-demo]# kubectl get replicaset
NAME DESIRED CURRENT READY AGE
nginx-demo-deployment-59fbc48594 2 2 2 9h
已经生效了
9、删除service
[root@localhost nginx-demo]# kubectl delete -f nginx-demo-service.yaml
service "nginx-demo-service" deleted
[root@localhost nginx-demo]#
10、删除deployment
[root@localhost nginx-demo]# kubectl delete -f nginx-demo-deployment.yaml
deployment.apps "nginx-demo-deployment" deleted
11、删除pod
[root@localhost log]# kubectl delete pods nginx-demo-deployment-59fbc48594-2x26z
pod "nginx-demo-deployment-59fbc48594-2x26z" deleted
12、查看集群中所有的namespace
[root@localhost log]# kubectl get ns
NAME STATUS AGE
default Active 20h
kube-node-lease Active 20h
kube-public Active 20h
kube-system Active 20h
13、查看某个pods内容器日志
[root@localhost nginx-demo]# kubectl logs nginx-demo-deployment-59fbc48594-mhjx8
/docker-entrypoint.sh: /docker-entrypoint.d/ is not empty, will attempt to perform configuration
/docker-entrypoint.sh: Looking for shell scripts in /docker-entrypoint.d/
/docker-entrypoint.sh: Launching /docker-entrypoint.d/10-listen-on-ipv6-by-default.sh
10-listen-on-ipv6-by-default.sh: info: Getting the checksum of /etc/nginx/conf.d/default.conf
10-listen-on-ipv6-by-default.sh: info: Enabled listen on IPv6 in /etc/nginx/conf.d/default.conf
/docker-entrypoint.sh: Launching /docker-entrypoint.d/20-envsubst-on-templates.sh
/docker-entrypoint.sh: Configuration complete; ready for start up
10.244.0.0 - - [05/Jan/2021:01:21:04 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.29.0" "-"
10.244.0.0 - - [05/Jan/2021:01:21:29 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.29.0" "-"
10.244.0.0 - - [05/Jan/2021:01:21:37 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.29.0" "-"
10.244.0.0 - - [05/Jan/2021:01:21:37 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.29.0" "-"
10.244.0.0 - - [05/Jan/2021:01:21:38 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.29.0" "-"
14、进入某个pod容器
拉到最后看到Events部分,会显示出 Kubernetes 在部署这个服务过程的关键日志。这里我们可以看到是拉取镜像失败了[root@localhost nginx-demo]# kubectl exec -it nginx-demo-deployment-59fbc48594-mhjx8 /bin/bash
15、部署pod、deployment、service出现问题的排查
运行kubectl decribe service(deployment)(pods) xxxxxxx
拉到最后看到Events部分,会显示出 Kubernetes 在部署过程的关键日志。这里我们可以看到是拉取镜像失败了
16、kubernetes集群架构图
17、传统项目部署框架
首先开发者将代码部署到你的代码仓库中,主流的用的Git或者gitlab,提交完代码通过CI/CD平台需要对代码进行拉取、编译、构建,产生一个War包,然后交给Ansible然后发送到云主机上/物理机,然后通过负载均衡将项目暴露出去,然后会有数据库,监控系统,日志系统来提供相关的服务。
18、基于kubernetes集群的项目部署框架
首先也是开发将代码放在代码仓库,然后通过jenkins去完成拉取代码,编译,上传到我们的镜像仓库。
这里是将代码打包成一个镜像,而不是可以执行的war或者jar包,这个镜像包含了你的项目的运行环境和项目代码,这个镜像可以放在任何docker上去run起来,都可以去访问,首先得保证能够在docker上去部署起来,再部署到k8s上,打出来的镜像去放在镜像仓库中,来集中的去管理这些镜像。
因为每天会产生几十个或者上百个镜像,必须通过镜像仓库去管理,这里可能会去写一个脚本去连接k8smaster,而k8s会根据自己的部署去调度这些pod,然后通过ingress去发布我们的应用,让用户去访问,每个ingress会关联一组pod,而service会创建这组pod的负载均衡,通过service去区分这些节点上的Pod。
然后数据库是放在集群之外,监控系统日志系统也可以放在k8s集群放在去部署,也可以放在之外,我们是放在k8s集群内的,也不是特别敏感,主要用来运维和开发调试用的,不会影响到我们的业务,所以我们优先去k8s中去部署。
centos7安装kubernetes1.18.5的更多相关文章
- kubespray-2.14.2安装kubernetes-1.18.10(ubuntu-20.04.1)
欢迎访问我的GitHub https://github.com/zq2599/blog_demos 内容:所有原创文章分类汇总及配套源码,涉及Java.Docker.Kubernetes.DevOPS ...
- CentOS7安装docker 18.06
原文:CentOS7安装docker 18.06 一.CentOS Docker 安装 参考docker 官方网站:https://docs.docker.com/install/linux/dock ...
- kubeadm安装kubernetes1.18.5
前言 尝试安装helm3,kubernetes1.18,istio1.6是否支持现有集群平滑迁移 版本 Centos7.6 升级内核4.x kubernetes:v1.18.5 helm:v3.2.4 ...
- centos7 安装kubernetes1.4
192.168.251.9 master192.168.251.231 node 建议可以搭建etcd集群来做数据库存储,并搭建kube-dns,然后把k8s的日志落地到/var/log/kubern ...
- centos7 安装 nginx-1.18.0 并设置开机自启动
一.到官网下载nginx Mainline version: nginx主力版本,为开发版 Stable version: 稳定版,在生产环境中选择此版本进行安装 Legacy versions: ...
- CentOS7安装Kubernetes1.16.3
一.概述 手工搭建 Kubernetes 集群是一件很繁琐的事情,为了简化这些操作,就产生了很多安装配置工具,如 Kubeadm ,Kubespray,RKE 等组件,我最终选择了官方的 Kubead ...
- kubernetes---CentOS7安装kubernetes1.11.2图文完整版
转载请注明出处:kubernetes-CentOS7安装kubernetes1.11.2图文完整版 架构规划 k8s至少需要一个master和一个node才能组成一个可用集群. 本章我们搭建一个mas ...
- CentOS7.3利用kubeadm安装kubernetes1.7.3完整版(官方文档填坑篇)
安装前记: 近来容器对企业来说已经不是什么陌生的概念,Kubernetes作为Google开源的容器运行平台,受到了大家的热捧.搭建一套完整的kubernetes平台,也成为试用这套平台必须迈过的坎儿 ...
- Centos7安装docker-compse踩过的坑
一.概要 本文,我们介绍如何在centos7环境下安装docker-compose, 记录下安装过程步骤以及遇到的问题还有解决办法. 二.安装方式 1.官方安装方式 sudo curl -L ht ...
随机推荐
- CRM系统实施的原则
在我们使用CRM系统服务企业和客户之前,需要先系统的实施它.使用CRM系统却没有发挥它应有价值的案例很多,那么我们要怎样才能让CRM的作用发挥到最大,并确保它是成功的?那么今天小编跟您聊一聊,您的企业 ...
- 基于深度学习的回声消除系统与Pytorch实现
文章作者:凌逆战 文章代码(pytorch实现):https://github.com/LXP-Never/AEC_DeepModel 文章地址(转载请指明出处):https://www.cnblog ...
- Word·去掉复制粘贴自动添加的空格
阅文时长 | 0.05分钟 字数统计 | 145.6字符 主要内容 | 1.引言&背景 2.声明与参考资料 『Word·去掉复制粘贴自动添加的空格』 编写人 | SCscHero 编写时间 | ...
- 【Cocos2d-x】屏蔽Emoji并解决由于Emoji导致的崩溃问题
IOS的Emoji表情因为编码问题,在Android手机上无法正常显示,如果当前的cc.Label节点使用的是系统字,在系统字库中找不到对应编码的字符,会导致崩溃. 为了解决这个问题,又要兼顾新老版本 ...
- [bug] 前台表单添加数据,后台返回成功消息,但数据库相应字段值为null
原因 前端代码中输入框字段值和后端定义的属性值不一致 分析 bean . controller 如下图,浏览器收到后台返回消息,在后台也可打印user信息,说明已成功接收前端JSON数据并转换为use ...
- k8s健康检查(9)
一.默认的健康检查 强大的自愈能力是 Kubernetes 这类容器编排引擎的一个重要特性.自愈的默认实现方式是自动重启发生故障的容器.除此之外,用户还可以利用 Liveness 和 Readines ...
- Docker的介绍和安装(1)
一.虚拟化简介 1.虚拟化概念 计算机虚拟化(Computing Virtualization),一种资源管理技术,是指通过虚拟化技术将一台计算机的各种实体资源 , 如处理器 , 网络 , 内存及存储 ...
- MyBatis 映射文件详解(六)
MyBatis 配置文件类型 MyBatis配置文件有两种类型,如下: 全局配置文件(如 mybatis-config.xml) Mapper XML 映射文件(如 UserMapper.xml) 上 ...
- 10.10 traceroute:追踪数据传输路由状况
traceroute命令 用于显示网络数据包传输到指定主机的路径信息,追踪数据传输路由状况.默认数据包大小是60字节(IPv4)或80字节(IPv6),用户可另行设置.它与Windows下的trace ...
- Azure Synapse Link for Dataverse
MyBuild - Scale, analyze and serve Microsoft Dynamics 365 application data with Azure 本周的微软Bulid大会上发 ...