【转载】TextView源码解析
1.简介
TextView作为Android系统上显示和排版文字以及提供对文字的增删改查、图文混排等功能的控件，内部是相对比较复杂的。这么一个复杂的控件自然需要依赖于一些其他的辅助类，例如：Layout以及Layout的相关子类、Span相关的类、MovementMethod接口、TransformationMethod接口等。这篇文章主要介绍TextView的结构和内部处理文字的流程以及TextView相关的辅助类在TextView处理文字过程中的作用。
2.TextView的内部结构和辅助类
TextView内部除了继承自View的相关属性和measure、layout、draw步骤，还包括：
- Layout: TextView的文字排版、折行策略以及文本绘制都是在Layout里面完成的，TextView的自身测量也受Layout的影响。Layout是TextView执行setText方法后，由TextView内部创建的实例，并不能由外部提供。可以用getLayout()方法获取。
- TransformationMethod: 用来处理最终的显示结果的类，例如显示密码的时候把密码转换成圆点。这个类并不直接影响TextView内部储存的Text，只影响显示的结果。
- MovementMethod: 用来处理TextView内部事件响应的类，可以针对TextView内文本的某一个区域做软键盘输入或者触摸事件的响应。
- Drawables: TextView的静态内部类，用来处理和储存TextView的CompoundDrawables,包括TextView的上下左右的Drawable以及错误提示的Drawable。
- Spans: Spans并不是特定的某一个类或者实现了某一个接口的类。它可以是任意类型，Spans实际上做的事情是在TextView的内部的text的某一个区域做标记。其中有部分Spans可以影响TextView的绘制和测量，如ImageSpan、BackgroundColorSpan、AbsoluteSizeSpan。还有可以响应点击事件的ClickableSpan。
- Editor: TextView作为可编辑文本控件的时候(EditText)，使用Editor来处理文本的区域选择处理和判断、拼写检查、弹出文本菜单等。
- InputConnection: EditText的文本输入部分是在TextView中完成的。而InputConnection是软键盘和TextView之间的桥梁，所有的软键盘的输入文字、修改文字和删除文字都是通过InputConnection传递给TextView的。
3.TextView的onTouchEvent处理
TextView内部能处理触摸事件的，包括自身的触摸处理、Editor的onTouchEvent、MovementMethod的onTouchEvent。Editor的onTouchEvent主要处理出于编辑状态下的触摸事件，比如点击选中、长按等。MovementMethod则主要负责文本内部有Span的时候的相关处理，比较常见的就是LinkMovementMethod处理ClickableSpan的点击事件。我们来看一下TextView内部对这些触摸事件的处理和优先级的分配：
public boolean onTouchEvent(MotionEvent event) {
final int action = event.getActionMasked();
//当Editor不为空的时候，给Editor的双击事件预设值
if (mEditor != null && action == MotionEvent.ACTION_DOWN) {
if (mFirstTouch && (SystemClock.uptimeMillis() - mLastTouchUpTime) <=
ViewConfiguration.getDoubleTapTimeout()) {
mEditor.mDoubleTap = true;
mFirstTouch = false;
} else {
mEditor.mDoubleTap = false;
mFirstTouch = true;
}
}
if (action == MotionEvent.ACTION_UP) {
mLastTouchUpTime = SystemClock.uptimeMillis();
}
//当Editor不为空，优先处理Editor的触摸事件
if (mEditor != null) {
mEditor.onTouchEvent(event);
//由于Editor内部onTouchEvent实际上交给了mSelectionModifierCursorController处理，所以这边判断mSelectionModifierCursorController是否需要处理接下来的一系列事件，如果是则直接返回跳过下面的步骤
if (mEditor.mSelectionModifierCursorController != null &&
mEditor.mSelectionModifierCursorController.isDragAcceleratorActive()) {
return true;
}
}
final boolean superResult = super.onTouchEvent(event);
//处理API 23新加入的InsertionActinoMode
if (mEditor != null && mEditor.mDiscardNextActionUp && action == MotionEvent.ACTION_UP) {
mEditor.mDiscardNextActionUp = false;
if (mEditor.mIsInsertionActionModeStartPending) {
mEditor.startInsertionActionMode();
mEditor.mIsInsertionActionModeStartPending = false;
}
return superResult;
}
final boolean touchIsFinished = (action == MotionEvent.ACTION_UP) &&
(mEditor == null || !mEditor.mIgnoreActionUpEvent) && isFocused();
if ((mMovement != null || onCheckIsTextEditor()) && isEnabled()
&& mText instanceof Spannable && mLayout != null) {
boolean handled = false;
//MovementMethod的触摸时间处理，如果MovementMethod类型是LinkMovementMethod则会处理文本内的所有ClickableSpan的点击
if (mMovement != null) {
handled |= mMovement.onTouchEvent(this, (Spannable) mText, event);
}
final boolean textIsSelectable = isTextSelectable();
if (touchIsFinished && mLinksClickable && mAutoLinkMask != 0 && textIsSelectable) {
//在文本可选择的情况下，默认是没有LinkMovementMethod来处理ClickableSpan相关的点击的，所以在文本可选择情况，TextView对所有的ClickableSpan进行统一处理
ClickableSpan[] links = ((Spannable) mText).getSpans(getSelectionStart(),
getSelectionEnd(), ClickableSpan.class);
if (links.length > 0) {
links[0].onClick(this);
handled = true;
}
}
if (touchIsFinished && (isTextEditable() || textIsSelectable)) {
final InputMethodManager imm = InputMethodManager.peekInstance();
viewClicked(imm);
if (!textIsSelectable && mEditor.mShowSoftInputOnFocus) {
handled |= imm != null && imm.showSoftInput(this, 0);
}
mEditor.onTouchUpEvent(event);
handled = true;
}
if (handled) {
return true;
}
}
return superResult;
}
4.TextView的创建Layout的过程
TextView内部并不仅仅只有一个用来显示文本内容的Layout，在设置了hint的时候，还需要有一个mHintLayout来处理hint的内容。如果设置了Ellipsize类型为Marquee时，还会有一个mSavedMarqueeModeLayout专门用来显示marquee效果。这些Layout都是通过内部的makeNewLayout方法来创建的：
protected void makeNewLayout(int wantWidth, int hintWidth
BoringLayout.Metrics boring,
BoringLayout.Metrics hintBoring,
int ellipsisWidth, boolean bringIntoView) {
//如果当前有marquee动画，则先停止动画
stopMarquee(); mOldMaximum = mMaximum;
mOldMaxMode = mMaxMode; mHighlightPathBogus = true; if (wantWidth < 0) {
wantWidth = 0;
}
if (hintWidth < 0) {
hintWidth = 0;
} //文本对齐方式
Layout.Alignment alignment = getLayoutAlignment();
final boolean testDirChange = mSingleLine && mLayout != null &&
(alignment == Layout.Alignment.ALIGN_NORMAL ||
alignment == Layout.Alignment.ALIGN_OPPOSITE);
int oldDir = 0;
if (testDirChange) oldDir = mLayout.getParagraphDirection(0); //检测是否设置了ellipsize
boolean shouldEllipsize = mEllipsize != null && getKeyListener() == null;
final boolean switchEllipsize = mEllipsize == TruncateAt.MARQUEE &&
mMarqueeFadeMode != MARQUEE_FADE_NORMAL;
TruncateAt effectiveEllipsize = mEllipsize;
if (mEllipsize == TruncateAt.MARQUEE &&
mMarqueeFadeMode == MARQUEE_FADE_SWITCH_SHOW_ELLIPSIS) {
effectiveEllipsize = TruncateAt.END_SMALL;
} //文本方向
if (mTextDir == null) {
mTextDir = getTextDirectionHeuristic();
} //创建主Layout
mLayout = makeSingleLayout(wantWidth, boring, ellipsisWidth, alignment, shouldEllipsize,
effectiveEllipsize, effectiveEllipsize == mEllipsize); //非常规的Marquee模式下，需要创建mSavedMarqueeModeLayout来保存marquee动画时所用的Layout，并且在动画期间把它和TextView的主Layout对换
if (switchEllipsize) {
TruncateAt oppositeEllipsize = effectiveEllipsize == TruncateAt.MARQUEE ?
TruncateAt.END : TruncateAt.MARQUEE;
mSavedMarqueeModeLayout = makeSingleLayout(wantWidth, boring, ellipsisWidth, alignment,
shouldEllipsize, oppositeEllipsize, effectiveEllipsize != mEllipsize);
} shouldEllipsize = mEllipsize != null;
mHintLayout = null; //判断是否需要创建hintLayout
if (mHint != null) {
if (shouldEllipsize) hintWidth = wantWidth; if (hintBoring == UNKNOWN_BORING) {
hintBoring = BoringLayout.isBoring(mHint, mTextPaint, mTextDir,
mHintBoring);
if (hintBoring != null) {
mHintBoring = hintBoring;
}
} //判断是否为boring，如果是则创建BoringLayout
if (hintBoring != null) {
if (hintBoring.width <= hintWidth &&
(!shouldEllipsize || hintBoring.width <= ellipsisWidth)) {
if (mSavedHintLayout != null) {
mHintLayout = mSavedHintLayout.
replaceOrMake(mHint, mTextPaint,
hintWidth, alignment, mSpacingMult, mSpacingAdd,
hintBoring, mIncludePad);
} else {
mHintLayout = BoringLayout.make(mHint, mTextPaint,
hintWidth, alignment, mSpacingMult, mSpacingAdd,
hintBoring, mIncludePad);
} mSavedHintLayout = (BoringLayout) mHintLayout;
} else if (shouldEllipsize && hintBoring.width <= hintWidth) {
if (mSavedHintLayout != null) {
mHintLayout = mSavedHintLayout.
replaceOrMake(mHint, mTextPaint,
hintWidth, alignment, mSpacingMult, mSpacingAdd,
hintBoring, mIncludePad, mEllipsize,
ellipsisWidth);
} else {
mHintLayout = BoringLayout.make(mHint, mTextPaint,
hintWidth, alignment, mSpacingMult, mSpacingAdd,
hintBoring, mIncludePad, mEllipsize,
ellipsisWidth);
}
}
} //不是boring的状态下，用StaticLayout来创建
if (mHintLayout == null) {
StaticLayout.Builder builder = StaticLayout.Builder.obtain(mHint, 0,
mHint.length(), mTextPaint, hintWidth)
.setAlignment(alignment)
.setTextDirection(mTextDir)
.setLineSpacing(mSpacingAdd, mSpacingMult)
.setIncludePad(mIncludePad)
.setBreakStrategy(mBreakStrategy)
.setHyphenationFrequency(mHyphenationFrequency);
if (shouldEllipsize) {
builder.setEllipsize(mEllipsize)
.setEllipsizedWidth(ellipsisWidth)
.setMaxLines(mMaxMode == LINES ? mMaximum : Integer.MAX_VALUE);
}
mHintLayout = builder.build();
}
} if (bringIntoView || (testDirChange && oldDir != mLayout.getParagraphDirection(0))) {
registerForPreDraw();
} //判断是否需要开始Marquee动画
if (mEllipsize == TextUtils.TruncateAt.MARQUEE) {
if (!compressText(ellipsisWidth)) {
final int height = mLayoutParams.height;
if (height != LayoutParams.WRAP_CONTENT && height != LayoutParams.MATCH_PARENT) {
startMarquee();
} else {
mRestartMarquee = true;
}
}
} if (mEditor != null) mEditor.prepareCursorControllers();
}
TextView的布局创建过程涉及到一个boring的概念，boring是指布局所用的文本里面不包含任何Span，所有的文本方向都是从左到右的布局，并且仅需一行就能显示完全的布局。这种情况下，TextView会使用BoringLayout类来创建相关的布局，以节省不必要的文本测量以及文本折行、Span宽度、文本方向等的计算。下面我们来看一下makeNewLayout中使用频率比较高的makeSingleLayout的代码:
private Layout makeSingleLayout(int wantWidth, BoringLayout.Metrics boring, int ellipsisWidth,
Layout.Alignment alignment, boolean shouldEllipsize, TruncateAt effectiveEllipsize,
boolean useSaved) {
Layout result = null;
//判断是否Spannable，如果是则用DynamicLayout类来创建布局，DynamicLayout内部实际也是使用StaticLayout来做文本的测量绘制，并在StaticLayout的基础上增加了文本或者Span改变时的监听，及时对文本或者Span的变化做出反应。
if (mText instanceof Spannable) {
result = new DynamicLayout(mText, mTransformed, mTextPaint, wantWidth,
alignment, mTextDir, mSpacingMult, mSpacingAdd, mIncludePad,
mBreakStrategy, mHyphenationFrequency,
getKeyListener() == null ? effectiveEllipsize : null, ellipsisWidth);
} else {
//如果boring是未知状态，则重新判断一次是否boring
if (boring == UNKNOWN_BORING) {
boring = BoringLayout.isBoring(mTransformed, mTextPaint, mTextDir, mBoring);
if (boring != null) {
mBoring = boring;
}
} //根据boring的属性来创建对应的布局，如果有mSavedLayout则从mSavedLayout创建
if (boring != null) {
if (boring.width <= wantWidth &&
(effectiveEllipsize == null || boring.width <= ellipsisWidth)) {
if (useSaved && mSavedLayout != null) {
//从之前保存的Layout中创建
result = mSavedLayout.replaceOrMake(mTransformed, mTextPaint,
wantWidth, alignment, mSpacingMult, mSpacingAdd,
boring, mIncludePad);
} else {
//创建新的Layout
result = BoringLayout.make(mTransformed, mTextPaint,
wantWidth, alignment, mSpacingMult, mSpacingAdd,
boring, mIncludePad);
} if (useSaved) {
mSavedLayout = (BoringLayout) result;
}
} else if (shouldEllipsize && boring.width <= wantWidth) {
if (useSaved && mSavedLayout != null) {
result = mSavedLayout.replaceOrMake(mTransformed, mTextPaint,
wantWidth, alignment, mSpacingMult, mSpacingAdd,
boring, mIncludePad, effectiveEllipsize,
ellipsisWidth);
} else {
result = BoringLayout.make(mTransformed, mTextPaint,
wantWidth, alignment, mSpacingMult, mSpacingAdd,
boring, mIncludePad, effectiveEllipsize,
ellipsisWidth);
}
}
}
} //如果没有创建BoringLayout, 则使用StaticLayout类来创建布局
if (result == null) {
StaticLayout.Builder builder = StaticLayout.Builder.obtain(mTransformed,
0, mTransformed.length(), mTextPaint, wantWidth)
.setAlignment(alignment)
.setTextDirection(mTextDir)
.setLineSpacing(mSpacingAdd, mSpacingMult)
.setIncludePad(mIncludePad)
.setBreakStrategy(mBreakStrategy)
.setHyphenationFrequency(mHyphenationFrequency);
if (shouldEllipsize) {
builder.setEllipsize(effectiveEllipsize)
.setEllipsizedWidth(ellipsisWidth)
.setMaxLines(mMaxMode == LINES ? mMaximum : Integer.MAX_VALUE);
}
result = builder.build();
}
return result;
}
5.TextView的文字处理和绘制
TextView主要的文字排版和渲染并不是在TextView里面完成的，而是由Layout类来处理文字排版工作。在单纯地使用TextView来展示静态文本的时候，这件事情则是由Layout的子类StaticLayout来完成的。
StaticLayout接收到字符串后，首先做的事情是根据字符串里面的换行符对字符串进行拆分。
for (int paraStart = bufStart; paraStart <= bufEnd; paraStart = paraEnd) {
paraEnd = TextUtils.indexOf(source, CHAR_NEW_LINE, paraStart, bufEnd);
if (paraEnd < 0)
paraEnd = bufEnd;
else
paraEnd++;
拆分后的段落(Paragraph)被分配给辅助类MeasuredText进行测量得到每个字符的宽度以及每个段落的FontMetric。并通过LineBreaker进行折行的判断
//把段落载入到MeasuredText中，并分配对应的缓存空间
measured.setPara(source, paraStart, paraEnd, textDir, b);
char[] chs = measured.mChars;
float[] widths = measured.mWidths;
byte[] chdirs = measured.mLevels;
int dir = measured.mDir;
boolean easy = measured.mEasy;
//把相关属性传给JNI层的LineBreaker
nSetupParagraph(b.mNativePtr, chs, paraEnd - paraStart,
firstWidth, firstWidthLineCount, restWidth,
variableTabStops, TAB_INCREMENT, b.mBreakStrategy, b.mHyphenationFrequency); int fmCacheCount = 0;
int spanEndCacheCount = 0;
for (int spanStart = paraStart, spanEnd; spanStart < paraEnd; spanStart = spanEnd) {
if (fmCacheCount * 4 >= fmCache.length) {
int[] grow = new int[fmCacheCount * 4 * 2];
System.arraycopy(fmCache, 0, grow, 0, fmCacheCount * 4);
fmCache = grow;
} if (spanEndCacheCount >= spanEndCache.length) {
int[] grow = new int[spanEndCacheCount * 2];
System.arraycopy(spanEndCache, 0, grow, 0, spanEndCacheCount);
spanEndCache = grow;
} if (spanned == null) {
spanEnd = paraEnd;
int spanLen = spanEnd - spanStart;
//段落没有Span的情况下，把整个段落交给MeasuredText计算每个字符的宽度和FontMetric
measured.addStyleRun(paint, spanLen, fm);
} else {
spanEnd = spanned.nextSpanTransition(spanStart, paraEnd,
MetricAffectingSpan.class);
int spanLen = spanEnd - spanStart;
MetricAffectingSpan[] spans =
spanned.getSpans(spanStart, spanEnd, MetricAffectingSpan.class);
spans = TextUtils.removeEmptySpans(spans, spanned, MetricAffectingSpan.class);
//把对排版有影响的Span交给MeasuredText测量宽度并计算FontMetric
measured.addStyleRun(paint, spans, spanLen, fm);
} //把测量后的FontMetric缓存下来方便后面使用
fmCache[fmCacheCount * 4 + 0] = fm.top;
fmCache[fmCacheCount * 4 + 1] = fm.bottom;
fmCache[fmCacheCount * 4 + 2] = fm.ascent;
fmCache[fmCacheCount * 4 + 3] = fm.descent;
fmCacheCount++; spanEndCache[spanEndCacheCount] = spanEnd;
spanEndCacheCount++;
} nGetWidths(b.mNativePtr, widths);
//计算段落中需要折行的位置，并返回折行的数量
int breakCount = nComputeLineBreaks(b.mNativePtr, lineBreaks, lineBreaks.breaks,
lineBreaks.widths, lineBreaks.flags, lineBreaks.breaks.length);
计算完每一行的测量相关信息、Span宽高以及折行位置，就可以开始按照最终的行数一行一行地保存下来，以供后面绘制和获取对应文本信息的时候使用。
for (int spanStart = paraStart, spanEnd; spanStart < paraEnd; spanStart = spanEnd) {
spanEnd = spanEndCache[spanEndCacheIndex++];
// 获取之前缓存的FontMetric信息
fm.top = fmCache[fmCacheIndex * 4 + 0];
fm.bottom = fmCache[fmCacheIndex * 4 + 1];
fm.ascent = fmCache[fmCacheIndex * 4 + 2];
fm.descent = fmCache[fmCacheIndex * 4 + 3];
fmCacheIndex++;
if (fm.top < fmTop) {
fmTop = fm.top;
}
if (fm.ascent < fmAscent) {
fmAscent = fm.ascent;
}
if (fm.descent > fmDescent) {
fmDescent = fm.descent;
}
if (fm.bottom > fmBottom) {
fmBottom = fm.bottom;
}
while (breakIndex < breakCount && paraStart + breaks[breakIndex] < spanStart) {
breakIndex++;
}
while (breakIndex < breakCount && paraStart + breaks[breakIndex] <= spanEnd) {
int endPos = paraStart + breaks[breakIndex];
boolean moreChars = (endPos < bufEnd);
//逐行把相关信息储存下来
v = out(source, here, endPos,
fmAscent, fmDescent, fmTop, fmBottom,
v, spacingmult, spacingadd, chooseHt, chooseHtv, fm, flags[breakIndex],
needMultiply, chdirs, dir, easy, bufEnd, includepad, trackpad,
chs, widths, paraStart, ellipsize, ellipsizedWidth,
lineWidths[breakIndex], paint, moreChars);
if (endPos < spanEnd) {
fmTop = fm.top;
fmBottom = fm.bottom;
fmAscent = fm.ascent;
fmDescent = fm.descent;
} else {
fmTop = fmBottom = fmAscent = fmDescent = 0;
}
here = endPos;
breakIndex++;
if (mLineCount >= mMaximumVisibleLineCount) {
return;
}
}
}
这样StaticLayout的排版过程就完成了。文本的绘制则是交给父类Layout来做的，Layout的绘制分为两大部分，drawBackground和drawText。drawBackground做的事情是如果文本内有LineBackgroundSpan则绘制所有的LineBackgroundSpan，然后判断是否有高亮背景(文本选中的背景)，如果有则绘制高亮背景。
public void drawBackground(Canvas canvas, Path highlight, Paint highlightPaint,
int cursorOffsetVertical, int firstLine, int lastLine) { //判断并绘制LineBackgroundSpan
if (mSpannedText) {
if (mLineBackgroundSpans == null) {
mLineBackgroundSpans = new SpanSet<LineBackgroundSpan>(LineBackgroundSpan.class);
} Spanned buffer = (Spanned) mText;
int textLength = buffer.length();
mLineBackgroundSpans.init(buffer, 0, textLength); if (mLineBackgroundSpans.numberOfSpans > 0) {
int previousLineBottom = getLineTop(firstLine);
int previousLineEnd = getLineStart(firstLine);
ParagraphStyle[] spans = NO_PARA_SPANS;
int spansLength = 0;
TextPaint paint = mPaint;
int spanEnd = 0;
final int width = mWidth;
//逐行绘制LineBackgroundSpan
for (int i = firstLine; i <= lastLine; i++) {
int start = previousLineEnd;
int end = getLineStart(i + 1);
previousLineEnd = end; int ltop = previousLineBottom;
int lbottom = getLineTop(i + 1);
previousLineBottom = lbottom;
int lbaseline = lbottom - getLineDescent(i); if (start >= spanEnd) {
spanEnd = mLineBackgroundSpans.getNextTransition(start, textLength); spansLength = 0;
if (start != end || start == 0) {
//排除不在绘制范围内的LineBackgroundSpan
for (int j = 0; j < mLineBackgroundSpans.numberOfSpans; j++) {
if (mLineBackgroundSpans.spanStarts[j] >= end ||
mLineBackgroundSpans.spanEnds[j] <= start) continue;
spans = GrowingArrayUtils.append(
spans, spansLength, mLineBackgroundSpans.spans[j]);
spansLength++;
}
}
}
//对当前行内的LineBackgroundSpan进行绘制
for (int n = 0; n < spansLength; n++) {
LineBackgroundSpan lineBackgroundSpan = (LineBackgroundSpan) spans[n];
lineBackgroundSpan.drawBackground(canvas, paint, 0, width,
ltop, lbaseline, lbottom,
buffer, start, end, i);
}
}
}
mLineBackgroundSpans.recycle();
} //判断并绘制高亮背景(即选中的文本)
if (highlight != null) {
if (cursorOffsetVertical != 0) canvas.translate(0, cursorOffsetVertical);
canvas.drawPath(highlight, highlightPaint);
if (cursorOffsetVertical != 0) canvas.translate(0, -cursorOffsetVertical);
}
}
drawText用来逐行绘制Layout的文本、影响显示效果的Span、以及Emoji表情等。当有Emoji或者Span的时候，实际绘制工作交给TextLine类来完成。
public void drawText(Canvas canvas, int firstLine, int lastLine) {
int previousLineBottom = getLineTop(firstLine);
int previousLineEnd = getLineStart(firstLine);
ParagraphStyle[] spans = NO_PARA_SPANS;
int spanEnd = 0;
TextPaint paint = mPaint;
CharSequence buf = mText;
Alignment paraAlign = mAlignment;
TabStops tabStops = null;
boolean tabStopsIsInitialized = false;
//获取TextLine实例
TextLine tl = TextLine.obtain();
//逐行绘制文本
for (int lineNum = firstLine; lineNum <= lastLine; lineNum++) {
int start = previousLineEnd;
previousLineEnd = getLineStart(lineNum + 1);
int end = getLineVisibleEnd(lineNum, start, previousLineEnd);
int ltop = previousLineBottom;
int lbottom = getLineTop(lineNum + 1);
previousLineBottom = lbottom;
int lbaseline = lbottom - getLineDescent(lineNum);
int dir = getParagraphDirection(lineNum);
int left = 0;
int right = mWidth;
if (mSpannedText) {
Spanned sp = (Spanned) buf;
int textLength = buf.length();
//检测是否段落的第一行
boolean isFirstParaLine = (start == 0 || buf.charAt(start - 1) == '\n');
//获得所有的段落风格相关的Span
if (start >= spanEnd && (lineNum == firstLine || isFirstParaLine)) {
spanEnd = sp.nextSpanTransition(start, textLength,
ParagraphStyle.class);
spans = getParagraphSpans(sp, start, spanEnd, ParagraphStyle.class);
paraAlign = mAlignment;
for (int n = spans.length - 1; n >= 0; n--) {
if (spans[n] instanceof AlignmentSpan) {
paraAlign = ((AlignmentSpan) spans[n]).getAlignment();
break;
}
}
tabStopsIsInitialized = false;
}
//获取影响行缩进的Span
final int length = spans.length;
boolean useFirstLineMargin = isFirstParaLine;
for (int n = 0; n < length; n++) {
if (spans[n] instanceof LeadingMarginSpan2) {
int count = ((LeadingMarginSpan2) spans[n]).getLeadingMarginLineCount();
int startLine = getLineForOffset(sp.getSpanStart(spans[n]));
if (lineNum < startLine + count) {
useFirstLineMargin = true;
break;
}
}
}
for (int n = 0; n < length; n++) {
if (spans[n] instanceof LeadingMarginSpan) {
LeadingMarginSpan margin = (LeadingMarginSpan) spans[n];
if (dir == DIR_RIGHT_TO_LEFT) {
margin.drawLeadingMargin(canvas, paint, right, dir, ltop,
lbaseline, lbottom, buf,
start, end, isFirstParaLine, this);
right -= margin.getLeadingMargin(useFirstLineMargin);
} else {
margin.drawLeadingMargin(canvas, paint, left, dir, ltop,
lbaseline, lbottom, buf,
start, end, isFirstParaLine, this);
left += margin.getLeadingMargin(useFirstLineMargin);
}
}
}
}
boolean hasTabOrEmoji = getLineContainsTab(lineNum);
if (hasTabOrEmoji && !tabStopsIsInitialized) {
if (tabStops == null) {
tabStops = new TabStops(TAB_INCREMENT, spans);
} else {
tabStops.reset(TAB_INCREMENT, spans);
}
tabStopsIsInitialized = true;
}
//判断当前行的第五方式
Alignment align = paraAlign;
if (align == Alignment.ALIGN_LEFT) {
align = (dir == DIR_LEFT_TO_RIGHT) ?
Alignment.ALIGN_NORMAL : Alignment.ALIGN_OPPOSITE;
} else if (align == Alignment.ALIGN_RIGHT) {
align = (dir == DIR_LEFT_TO_RIGHT) ?
Alignment.ALIGN_OPPOSITE : Alignment.ALIGN_NORMAL;
}
int x;
if (align == Alignment.ALIGN_NORMAL) {
if (dir == DIR_LEFT_TO_RIGHT) {
x = left + getIndentAdjust(lineNum, Alignment.ALIGN_LEFT);
} else {
x = right + getIndentAdjust(lineNum, Alignment.ALIGN_RIGHT);
}
} else {
int max = (int)getLineExtent(lineNum, tabStops, false);
if (align == Alignment.ALIGN_OPPOSITE) {
if (dir == DIR_LEFT_TO_RIGHT) {
x = right - max + getIndentAdjust(lineNum, Alignment.ALIGN_RIGHT);
} else {
x = left - max + getIndentAdjust(lineNum, Alignment.ALIGN_LEFT);
}
} else { // Alignment.ALIGN_CENTER
max = max & ~1;
x = ((right + left - max) >> 1) +
getIndentAdjust(lineNum, Alignment.ALIGN_CENTER);
}
}
paint.setHyphenEdit(getHyphen(lineNum));
Directions directions = getLineDirections(lineNum);
if (directions == DIRS_ALL_LEFT_TO_RIGHT && !mSpannedText && !hasTabOrEmoji) {
//没有任何Emoji或者span的时候，直接调用Canvas来绘制文本
canvas.drawText(buf, start, end, x, lbaseline, paint);
} else {
//当有Emoji或者Span的时候，交给TextLine类来绘制
tl.set(paint, buf, start, end, dir, directions, hasTabOrEmoji, tabStops);
tl.draw(canvas, x, ltop, lbaseline, lbottom);
}
paint.setHyphenEdit(0);
}
TextLine.recycle(tl);
}
我们下面再来看看TextLine是如何绘制有特殊情况的文本的
void draw(Canvas c, float x, int top, int y, int bottom) {
//判断是否有Tab或者Emoji
if (!mHasTabs) {
if (mDirections == Layout.DIRS_ALL_LEFT_TO_RIGHT) {
drawRun(c, 0, mLen, false, x, top, y, bottom, false);
return;
}
if (mDirections == Layout.DIRS_ALL_RIGHT_TO_LEFT) {
drawRun(c, 0, mLen, true, x, top, y, bottom, false);
return;
}
}
float h = 0;
int[] runs = mDirections.mDirections;
RectF emojiRect = null;
int lastRunIndex = runs.length - 2;
//逐个绘制
for (int i = 0; i < runs.length; i += 2) {
int runStart = runs[i];
int runLimit = runStart + (runs[i+1] & Layout.RUN_LENGTH_MASK);
if (runLimit > mLen) {
runLimit = mLen;
}
boolean runIsRtl = (runs[i+1] & Layout.RUN_RTL_FLAG) != 0;
int segstart = runStart;
for (int j = mHasTabs ? runStart : runLimit; j <= runLimit; j++) {
int codept = 0;
Bitmap bm = null;
if (mHasTabs && j < runLimit) {
codept = mChars[j];
if (codept >= 0xd800 && codept < 0xdc00 && j + 1 < runLimit) {
codept = Character.codePointAt(mChars, j);
if (codept >= Layout.MIN_EMOJI && codept <= Layout.MAX_EMOJI) {
//获取Emoji对应的图像
bm = Layout.EMOJI_FACTORY.getBitmapFromAndroidPua(codept);
} else if (codept > 0xffff) {
++j;
continue;
}
}
}
if (j == runLimit || codept == '\t' || bm != null) {
//绘制文字
h += drawRun(c, segstart, j, runIsRtl, x+h, top, y, bottom,
i != lastRunIndex || j != mLen);
if (codept == '\t') {
h = mDir * nextTab(h * mDir);
} else if (bm != null) {
float bmAscent = ascent(j);
float bitmapHeight = bm.getHeight();
float scale = -bmAscent / bitmapHeight;
float width = bm.getWidth() * scale;
if (emojiRect == null) {
emojiRect = new RectF();
}
//调整emoji图像绘制矩形
emojiRect.set(x + h, y + bmAscent,
x + h + width, y);
//绘制Emoji图像
c.drawBitmap(bm, null, emojiRect, mPaint);
h += width;
j++;
}
segstart = j + 1;
}
}
}
}
这样就完成了文本的绘制工作，简单地总结就是：分析整体文本—>拆分为段落—>计算整体段落的文本包括Span的测量信息—>对文本进行折行—>根据最终行数把文本测量信息保存—>绘制文本的行背景—>判断并获取文本种的Span和Emoji图像—>绘制最终的文本和图像。当然我们省略了一部分内容，比如段落文本方向，单行的文本排版方向的计算，实际的处理要更为复杂。
接下来我们来看一下在测量过程中出现的FontMetrics，这是一个Paint的静态内部类。主要用来储存文字排版的Y轴相关信息。内部仅包含ascent、descent、top、bottom、leading五个数值。如下图:
除了leading以外，其他的数值都是相对于每一行的baseline的，也就是说其他的数值需要加上对应行的baseline才能得到最终真实的坐标。
6.TextView接收软键盘输入
Android上的标准文本编辑控件是EditText，而EditText对软键盘输入的处理，却是在TextView内部实现的。Android为所有的View预留了一个接收软键盘输入的接口类，叫InputConnection。软键盘以InputConnection为桥梁把文字输入、文字修改、文字删除等传递给View。任意View只要重写onCheckIsTextEditor()并返回true，然后重写onCreateInputConnection(EditorInfo outAttrs)返回一个InputConnection的实例，便可以接收软键盘的输入。TextView的软键盘输入接收，是通过EditableInputConnection类来实现的。
public InputConnection onCreateInputConnection(EditorInfo outAttrs) {
//判断是否处于可编辑状态
if (onCheckIsTextEditor() && isEnabled()) {
mEditor.createInputMethodStateIfNeeded();
//设置输入法相关的信息
outAttrs.inputType = getInputType();
if (mEditor.mInputContentType != null) {
outAttrs.imeOptions = mEditor.mInputContentType.imeOptions;
outAttrs.privateImeOptions = mEditor.mInputContentType.privateImeOptions;
outAttrs.actionLabel = mEditor.mInputContentType.imeActionLabel;
outAttrs.actionId = mEditor.mInputContentType.imeActionId;
outAttrs.extras = mEditor.mInputContentType.extras;
} else {
outAttrs.imeOptions = EditorInfo.IME_NULL;
}
if (focusSearch(FOCUS_DOWN) != null) {
outAttrs.imeOptions |= EditorInfo.IME_FLAG_NAVIGATE_NEXT;
}
if (focusSearch(FOCUS_UP) != null) {
outAttrs.imeOptions |= EditorInfo.IME_FLAG_NAVIGATE_PREVIOUS;
}
if ((outAttrs.imeOptions&EditorInfo.IME_MASK_ACTION)
== EditorInfo.IME_ACTION_UNSPECIFIED) {
if ((outAttrs.imeOptions&EditorInfo.IME_FLAG_NAVIGATE_NEXT) != 0) {
//把软键盘的enter设为下一步
outAttrs.imeOptions |= EditorInfo.IME_ACTION_NEXT;
} else {
//把软键盘的enter设为完成
outAttrs.imeOptions |= EditorInfo.IME_ACTION_DONE;
}
if (!shouldAdvanceFocusOnEnter()) {
outAttrs.imeOptions |= EditorInfo.IME_FLAG_NO_ENTER_ACTION;
}
}
if (isMultilineInputType(outAttrs.inputType)) {
outAttrs.imeOptions |= EditorInfo.IME_FLAG_NO_ENTER_ACTION;
}
outAttrs.hintText = mHint;
//判断TextView内部文本是否可编辑
if (mText instanceof Editable) {
//返回EditableInputConnection实例
InputConnection ic = new EditableInputConnection(this);
outAttrs.initialSelStart = getSelectionStart();
outAttrs.initialSelEnd = getSelectionEnd();
outAttrs.initialCapsMode = ic.getCursorCapsMode(getInputType());
return ic;
}
}
return null;
}
我们再来看一下EditableInputConnection里面的几个主要的方法：
首先是commitText方法，这个方法接收输入法输入的字符并提交给TextView。
public boolean commitText(CharSequence text, int newCursorPosition) {
//判断TextView是否为空
if (mTextView == null) {
return super.commitText(text, newCursorPosition);
}
//判断文本是否Span，来自输入法的Span一般只有SuggestionSpan，SuggestionSpan携带了输入法的错别字修正的词
if (text instanceof Spanned) {
Spanned spanned = ((Spanned) text);
SuggestionSpan[] spans = spanned.getSpans(0, text.length(), SuggestionSpan.class);
mIMM.registerSuggestionSpansForNotification(spans);
}
mTextView.resetErrorChangedFlag();
//提交字符
boolean success = super.commitText(text, newCursorPosition);
mTextView.hideErrorIfUnchanged();
//返回是否成功
return success;
}
getEditable方法，这个方法并不是InputConnection接口的一部分，而是EditableInputConnection的父类BaseInputConnection的方法，用来获取一个可编辑对象，EditableInputConnection里面的所有修改都针对这个可编辑对象来做。
public Editable getEditable() {
TextView tv = mTextView;
if (tv != null) {
//返回TextView的可编辑对象
return tv.getEditableText();
}
return null;
}
deleteSurroundingText方法，这个方法用来删除光标前后的内容：
public boolean deleteSurroundingText(int beforeLength, int afterLength) {
if (DEBUG) Log.v(TAG, "deleteSurroundingText " + beforeLength
+ " / " + afterLength);
final Editable content = getEditable();
if (content == null) return false;
//批量删除标记
beginBatchEdit();
//获取当前已选择的文本的位置
int a = Selection.getSelectionStart(content);
int b = Selection.getSelectionEnd(content);
if (a > b) {
int tmp = a;
a = b;
b = tmp;
}
int ca = getComposingSpanStart(content);
int cb = getComposingSpanEnd(content);
if (cb < ca) {
int tmp = ca;
ca = cb;
cb = tmp;
}
if (ca != -1 && cb != -1) {
if (ca < a) a = ca;
if (cb > b) b = cb;
}
int deleted = 0;
//删除光标之前的文本
if (beforeLength > 0) {
int start = a - beforeLength;
if (start < 0) start = 0;
content.delete(start, a);
deleted = a - start;
}
//删除光标之后的文本
if (afterLength > 0) {
b = b - deleted;
int end = b + afterLength;
if (end > content.length()) end = content.length();
content.delete(b, end);
}
//结束批量编辑
endBatchEdit();
return true;
}
commitCompletion和commitCorrection方法，即是用来补全单词和修正错别字的方法，这两个方法内部都是调用TextView对应的方法来实现的。
public boolean commitCompletion(CompletionInfo text) {
if (DEBUG) Log.v(TAG, "commitCompletion " + text);
mTextView.beginBatchEdit();
mTextView.onCommitCompletion(text);
mTextView.endBatchEdit();
return true;
}
@Override
public boolean commitCorrection(CorrectionInfo correctionInfo) {
if (DEBUG) Log.v(TAG, "commitCorrection" + correctionInfo);
mTextView.beginBatchEdit();
mTextView.onCommitCorrection(correctionInfo);
mTextView.endBatchEdit();
return true;
}
8.总结
一个展示文本+文本编辑器功能的控件需要做的事情很多，要对文本进行排版、处理不同的段落风格、处理段落内的不同emoji和span、进行折行计算，然后还需要做文本编辑、文本选择等。而TextView把这些事情明确分工给不同的类。这样不仅仅把复杂问题拆分成了一个个简单的小功能，同时也大大增加了可扩展性。
【转载】TextView源码解析的更多相关文章
- 【转载】Scroller源码解析
原文地址:https://github.com/Skykai521/AndroidSdkSourceAnalysis/blob/master/article/Scroller%E6%BA%90%E7% ...
- jQuery整体架构源码解析（转载）
jQuery整体架构源码解析 最近一直在研读 jQuery 源码,初看源码一头雾水毫无头绪,真正静下心来细看写的真是精妙,让你感叹代码之美. 其结构明晰,高内聚.低耦合,兼具优秀的性能与便利的扩展性, ...
- 转载：Bootstrap 源码解析
Bootstrap 源码解析 前言 Bootstrap 是个CSS库,简单,高效.很多都可以忘记了再去网站查.但是有一些核心的东西需要弄懂.个人认为弄懂了这些应该就算是会了.源码看一波. 栅格系统 所 ...
- 【转载】Xutils3源码解析
Github源码地址:https://github.com/wyouflf/xUtils3 原文地址 :http://www.codekk.com/blogs/detail/54cfab086c476 ...
- 【转载】okhttp源码解析
转自:http://www.open-open.com/lib/view/open1472216742720.html https://blog.piasy.com/2016/07/11/Unders ...
- 【转载】FloatingActionButton源码解析
原文地址:https://github.com/Rowandjj/my_awesome_blog/blob/master/fab_anlysis/README.md loatingActionButt ...
- Android LayoutInflater源码解析:你真的能正确使用吗？
版权声明:本文出自汪磊的博客,未经作者允许禁止转载. 好久没写博客了,最近忙着换工作,没时间写,工作刚定下来.稍后有时间会写一下换工作经历.接下来进入本篇主题,本来没想写LayoutInflater的 ...
- Android开发——AsyncTask的使用以及源码解析
．AsyncTask使用介绍 转载请标明出处:http://blog.csdn.net/seu_calvin/article/details/52172248 AsyncTask封装了Thread和 ...
- 【原】Android热更新开源项目Tinker源码解析系列之三：so热更新
本系列将从以下三个方面对Tinker进行源码解析: Android热更新开源项目Tinker源码解析系列之一:Dex热更新 Android热更新开源项目Tinker源码解析系列之二:资源文件热更新 A ...
随机推荐
- Log4J使用实例---日志进行邮件发送或是存入数据库
部分转摘:http://blog.csdn.net/azhao_dn/article/details/9118667 1.根类别(在类别层次结构的顶部,即全局性的日志级别) 配置根Logger,其语法 ...
- 51Nod 1182 完美字符串
Input示例 dad Output示例 77 #include "bits/stdc++.h" using namespace std; #define LL long long ...
- [洛谷P1858] 多人背包
洛谷题目链接:多人背包 题目描述 求01背包前k优解的价值和 输入输出格式 输入格式: 第一行三个数K.V.N 接下来每行两个数,表示体积和价值 输出格式: 前k优解的价值和 输入输出样例 输入样例# ...
- centOS 安装Python3与python2并存
如果本机安装了`python2`,尽量不要管他,使用`python3`运行python脚本就好,因为可能有程序依赖目前的`python2`环境, 比如`yum`!!!!! 不要动现有的`python2 ...
- jquery字符串序列化方法总结
在jquery中字符串序列化方法包括有param() .serialize() .serializeArray(),在这里对其常用做法进行总结. $.param()方法这是serialize()方法的 ...
- this指针再解
this.new.call和apply的相关问题 讲解this指针的原理是个很复杂的问题,如果我们从javascript里this的实现机制来说明this,很多朋友可能会越来越糊涂,因此本篇打算换一 ...
- System V共享内存介绍
(一)简单概念 共享内存作为一种进程间通信的方式,其相较于其他进程间通信方式而言最大的优点就是数据传输速率快.其内部实现的方式采用了Linux进程地址空间中的mmap文件映射区,将文件内容直接映射到各 ...
- Linux 入门记录：五、vi、vim 编辑器
一.vi.vim编辑器 vi 是一个命令行界面下的文本编辑工具,最早在 1976 年由 Bill Joy 开发.当时名字叫做 ex.vi 支持绝大多数操作系统(最早在类 Unix 操作系统的 BSD上 ...
- ktime使用例子【原创】
#include <linux/kernel.h>#include <linux/init.h>#include <linux/module.h>#include ...
- Bookmarks_www2
Bookmarks Bookmarks alexis- (Alex Incogito) - Repositories · GitHub GitHub - aetcnc-Arduino_DeltaHMI ...