[root@localhost ipvsadm]#  ipvsadm  -h
ipvsadm v1.24 2005/12/10 (compiled with popt and IPVS v1.2.1)
Usage:
ipvsadm -A|E -t|u|f service-address [-s scheduler] [-p [timeout]] [-M netmask]
ipvsadm -D -t|u|f service-address
ipvsadm -C
ipvsadm -R
ipvsadm -S [-n]
ipvsadm -a|e -t|u|f service-address -r server-address [options]
ipvsadm -d -t|u|f service-address -r server-address
ipvsadm -L|l [options]
ipvsadm -Z [-t|u|f service-address]
ipvsadm --set tcp tcpfin udp
ipvsadm --start-daemon state [--mcast-interface interface] [--syncid sid]
ipvsadm --stop-daemon state
ipvsadm -h Commands:
Either long or short options are allowed.
--add-service -A add virtual service with options
--edit-service -E edit virtual service with options
--delete-service -D delete virtual service
--clear -C clear the whole table
--restore -R restore rules from stdin
--save -S save rules to stdout
--add-server -a add real server with options
--edit-server -e edit real server with options
--delete-server -d delete real server
--list -L|-l list the table
--zero -Z zero counters in a service or all services
--set tcp tcpfin udp set connection timeout values
--start-daemon start connection sync daemon
--stop-daemon stop connection sync daemon
--help -h display this help message Options:
--tcp-service -t service-address service-address is host[:port]
--udp-service -u service-address service-address is host[:port]
--fwmark-service -f fwmark fwmark is an integer greater than zero
--scheduler -s scheduler one of rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq,
the default scheduler is wlc.
--persistent -p [timeout] persistent service
--netmask -M netmask persistent granularity mask
--real-server -r server-address server-address is host (and port)
--gatewaying -g gatewaying (direct routing) (default)
--ipip -i ipip encapsulation (tunneling)
--masquerading -m masquerading (NAT)
--weight -w weight capacity of real server
--u-threshold -x uthreshold upper threshold of connections
--l-threshold -y lthreshold lower threshold of connections
--mcast-interface interface multicast interface for connection sync
--syncid sid syncid for connection sync (default=255)
--connection -c output of current IPVS connections
--timeout output of timeout (tcp tcpfin udp)
--daemon output of daemon information
--stats output of statistics information
--rate output of rate information
--exact expand numbers (display exact values)
--thresholds output of thresholds information
--persistent-conn output of persistent connection info
--sort sorting output of service/server entries
--numeric -n numeric output of addresses and ports
--add-service     -A        add virtual service with option
在内核的虚拟服务器表中添加一条新的虚拟服务器记录。也就是增加一台新的虚拟服务器
--edit-service -E edit virtual service with options
编辑内核虚拟服务器表中的一条虚拟服务器记录
--delete-service -D delete virtual service
删除内核虚拟服务器表中的一条虚拟服务器记录
--clear -C clear the whole table
清除内核虚拟服务器表中的所有记录
--restore -R restore rules from stdin
恢复虚拟服务器规则
--save -S save rules to stdout
保存虚拟服务器规则,输出为-R 选项可读的格式
--add-server -a add real server with options
在内核虚拟服务器表的一条记录里添加一条新的真实服务器
--edit-server -e edit real server with options
编辑一条虚拟服务器记录中的某条真实服务器记录
--delete-server -d delete real server
删除一条虚拟服务器记录中的某条真实服务器记录
--list -L|-l list the table
显示内核虚拟服务器表
--zero -Z zero counters in a service or all services
虚拟服务表计数器清零
--set tcp tcpfin udp set connection timeout values
设置连接超时值
--start-daemon start connection sync daemon
启动同步守护进程。他后面可以是master 或backup,用来说明LVS Router 是master 或是backup。在这个功能上也可以采keepalived 的VRRP 功能。
--stop-daemon stop connection sync daemon
停止同步守护进程
--help -h display this help message
显示帮助信息 Options: --tcp-service -t service-address service-address is host[:port]
说明虚拟服务器提供的是tcp 的服务[vip:port] or [real-server-ip:port]
--udp-service -u service-address service-address is host[:port]
说明虚拟服务器提供的是udp 的服务[vip:port] or [real-server-ip:port]
--fwmark-service -f fwmark fwmark is an integer greater than zero
说明是经过iptables 标记过的服务类型。
--scheduler -s scheduler one of rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq,the default scheduler is wlc.
使用的调度算法,有这样几个选项,默认的调度算法是: wlc.
--persistent -p [timeout] persistent service
持久稳固的服务。这个选项的意思是来自同一个客户的多次请求,将被同一台真实的服务器处理。timeout 的默认值为300 秒
--netmask -M netmask persistent granularity mask --real-server -r server-address server-address is host (and port)
真实的服务器[Real-Server:port]
--gatewaying -g gatewaying (direct routing) (default)
指定LVS 的工作模式为直接路由模式(也是LVS 默认的模式
--ipip -i ipip encapsulation (tunneling)
指定LVS 的工作模式为隧道模式
--masquerading -m masquerading (NAT)
指定LVS 的工作模式为NAT 模式
--weight -w weight capacity of real server
真实服务器的权值
--u-threshold -x uthreshold upper threshold of connections --l-threshold -y lthreshold lower threshold of connections --mcast-interface interface multicast interface for connection sync
指定组播的同步接口
--syncid sid syncid for connection sync (default=255) --connection -c output of current IPVS connections
显示LVS 目前的连接 如:ipvsadm -L -c
--timeout output of timeout (tcp tcpfin udp)
显示tcp tcpfin udp 的timeout 值 如:ipvsadm -L --timeout
--daemon output of daemon information
显示同步守护进程状态
--stats output of statistics information
显示统计信息
--rate output of rate information
显示速率信息
--thresholds output of thresholds information --persistent-conn output of persistent connection info --sort sorting output of service/server entries
对虚拟服务器和真实服务器排序输出
--ops -O one-packet scheduling --numeric -n numeric output of addresses and ports
输出IP 地址和端口的数字形式

有两种命令选项格式,长的和短的,具有相同的意思。在实际使用时,两种都可
以。
-A –add-service 在内核的虚拟服务器表中添加一条新的虚拟服务器记录。也
就是增加一台新的虚拟服务器。
-E –edit-service 编辑内核虚拟服务器表中的一条虚拟服务器记录。
-D –delete-service 删除内核虚拟服务器表中的一条虚拟服务器记录。
-C –clear 清除内核虚拟服务器表中的所有记录。
-R –restore 恢复虚拟服务器规则
-S –save 保存虚拟服务器规则,输出为-R 选项可读的格式
-a –add-server 在内核虚拟服务器表的一条记录里添加一条新的真实服务器
记录。也就是在一个虚拟服务器中增加一台新的真实服务器
-e –edit-server 编辑一条虚拟服务器记录中的某条真实服务器记录
-d –delete-server 删除一条虚拟服务器记录中的某条真实服务器记录
-L|-l –list 显示内核虚拟服务器表
-Z –zero 虚拟服务表计数器清零(清空当前的连接数量等)
–set tcp tcpfin udp 设置连接超时值
–start-daemon 启动同步守护进程。他后面可以是master 或backup,用来说
明LVS Router 是master 或是backup。在这个功能上也可以采用keepalived 的
VRRP 功能。
–stop-daemon 停止同步守护进程
-h –help 显示帮助信息
其他的选项:
-t –tcp-service service-address 说明虚拟服务器提供的是tcp 的服务
[vip:port] or [real-server-ip:port]
-u –udp-service service-address 说明虚拟服务器提供的是udp 的服务
[vip:port] or [real-server-ip:port]
-f –fwmark-service fwmark 说明是经过iptables 标记过的服务类型。
-s –scheduler scheduler 使用的调度算法,有这样几个选项
rr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq,
默认的调度算法是: wlc.
-p –persistent [timeout] 持久稳固的服务。这个选项的意思是来自同一个客
户的多次请求,将被同一台真实的服务器处理。timeout 的默认值为300 秒。
-M –netmask netmask persistent granularity mask
-r –real-server server-address 真实的服务器[Real-Server:port]
-g –gatewaying 指定LVS 的工作模式为直接路由模式(也是LVS 默认的模式)
-i –ipip 指定LVS 的工作模式为隧道模式
-m –masquerading 指定LVS 的工作模式为NAT 模式
-w –weight weight 真实服务器的权值
–mcast-interface interface 指定组播的同步接口
-c –connection 显示LVS 目前的连接 如:ipvsadm -L -c
–timeout 显示tcp tcpfin udp 的timeout 值 如:ipvsadm -L –timeout
–daemon 显示同步守护进程状态
–stats 显示统计信息
–rate 显示速率信息
–sort 对虚拟服务器和真实服务器排序输出

–numeric -n 输出IP 地址和端口的数字形式

--stat选项是统计自该条转发规则生效以来的包
1. Conns (connections scheduled) 已经转发过的连接数
2. InPkts (incoming packets) 入包个数
3. OutPkts (outgoing packets) 出包个数
4. InBytes (incoming bytes) 入流量(字节)
5. OutBytes (outgoing bytes) 出流量(字节)
--rate选项是显示速率信息
1. CPS (current connection rate) 每秒连接数
2. InPPS (current in packet rate) 每秒的入包个数
3. OutPPS (current out packet rate) 每秒的出包个数
4. InBPS (current in byte rate) 每秒入流量(字节)
5. OutBPS (current out byte rate) 每秒入流量(字节)

ipvsadm参数详解(常用命令)的更多相关文章

  1. [转帖]Ipvsadm参数详解(常用命令)

    Ipvsadm参数详解(常用命令) 2013年11月29日 12:41:40 怀素1980 阅读数:15901   版权声明:本文为博主原创文章,未经博主允许不得转载. https://blog.cs ...

  2. mysql详解常用命令操作,利用SQL语句创建数据表—增删改查

    关系型数据库的核心内容是 关系 即 二维表 MYSQL的启动和连接show variables; [所有的变量] 1服务端启动 查看服务状态 sudo /etc/init.d/mysql status ...

  3. JAVA命令参数详解

    JAVA命令参数详解 JAVA命令详解 结构 说明 Java 和 OldJava JIT 选项 另请参阅 结构 java [ options ] class [ argument ... ] java ...

  4. shell编程系列23--shell操作数据库实战之mysql命令参数详解

    shell编程系列23--shell操作数据库实战之mysql命令参数详解 mysql命令参数详解 -u 用户名 -p 用户密码 -h 服务器ip地址 -D 连接的数据库 -N 不输出列信息 -B 使 ...

  5. free命令常用参数详解

    free命令常用参数详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 在运维期间我们会经常去查看服务器硬件信息,比如说内存,大家可能知道看内存用“[root@yinzhengji ...

  6. chattr的常用参数详解

    chattr的常用参数详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 在实际生产环境中,有的运维工程师不得不和开发和测试打交道,在我们公司最常见的就是部署接口.每天每个人部署的 ...

  7. find常用参数详解

    find常用参数详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 在linux系统中,在init 3模式情况下都是命令行模式,这个时候我们想要找到一个文件的就得依赖一个非常好用的 ...

  8. cat常用参数详解

    cat常用参数详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 最近,我的一个朋友对linux特别感兴趣,于是我觉得每天交给他一个命令的使用,这样一个月下来也会使用30个命令,基 ...

  9. mysqldump的常用语句及各参数详解

    mysqldump的常用语句及各参数详解 分类: MySQL 2011-01-11 17:55 1368人阅读 评论(0) 收藏 举报 数据库mysql服务器tableinsertdatabase m ...

随机推荐

  1. Mysql在windows下和linux下对表名大小写默认要求的一个细节

    今天在虚拟机里搭建项目环境,偷了下懒,直接把本机数据库中的表用sqlyog复制给虚拟机中的数据库,然后开始部署项目,项目一启动提示: Table 'sdmqrt.QRTZ_LOCKS' doesn't ...

  2. git一些常用设置

    用法:git config [选项] 配置文件位置    --global              使用全局配置文件    --system              使用系统级配置文件    -- ...

  3. UEditor For ASP.Net Core Use Qiniu

    UEditor For ASP.Net Core Use Qiniu 此项目为UEditor提供文件管理; 后端服务使用 ASP.Net Core; 使用七牛提供的云存储; 项目地址 https:// ...

  4. [转]GridView中直接新增行、编辑和删除

    本文转自:http://www.cnblogs.com/gdjlc/archive/2009/11/10/2086951.html .aspx <div><asp:Button ru ...

  5. [转]Jquery easyui开启行编辑模式增删改操作

    本文转自:http://www.cnblogs.com/nyzhai/archive/2013/05/14/3077152.html Jquery easyui开启行编辑模式增删改操作先上图 Html ...

  6. fdtd simulation, plotting with gnuplot, writting in perl

    # 9月13日 于成都黄龙溪 1 #!/usr/bin/perl # Author : Leon Email: yangli0534@gmail.com # fdtd simulation , plo ...

  7. WPF数字输入框和IP地址输入框

    数字输入框 简介 在业务中,我们经常需要限制用户的输入,比如限制输入长度,限制只能输入数字等等.限制输入长度WPF内置的TextBox已经帮我们解决了,但是限制输入数字却并未在WPF中内置解决方案.使 ...

  8. 只有图片拼接的html页面图片之间有白条的解决方法

    有时候会有这样的页面,整个页面也就是几张切好的图片组成,但是把这些图片使用代码拼接好,又总会出现图片间有白条的问题,如下图: 解决方法:给图片的父容器添加 line-height: 0; 就好了,因为 ...

  9. 17SpringMvc_在业务控制方法中写入包装User的模型来收集参数——解决问题

    在解决问题之前,我要说明一下jsp页面上填入信息,一个用户的信息比如用户的名字,用户的电话,用户的手机等等,在这个jsp页面上填好信息后,转到有个action处理这个信息.原理是什么? 在jsp页面上 ...

  10. 快捷键forMac

    1.手动补全快捷键 设置completion+basic或者completion+smartType 2.快速导入指定API的包 command+1