Connecting to 192.168.0.254:23...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.
    *************************************************************************
    Welcome to ZXR10 Carrier-class High-end Routing Switch of ZTE Corporation
    *************************************************************************

Username:admin
Password:
internet_6905>en
internet_6905>enable
Password:

internet_6905#show version
ZXR10 6905 Software, Version ZXR10 G-Series&8900&6900 V2.8.01.C.24.P03, RELEASE SOFTWARE
Copyright (c) 2001-2008 by ZTE Corporation
Compiled Nov 30 2008, 12:44:43
ZXR10 Router Operating System Software, ZTE Corporation
ZXR10 ROS Version V4.8.11.01
System image files are flash:<//flash/img/zxr10.zar>
System uptime is 212 days, 20 hours, 35 minutes

[MEC, panel 1, master]
Main Processor: PowerPC MPC8541 Processor
System Memory : 512M bytes  ,    System Flash      : 64M bytes
System Serial : 15114       ,    System BaudRate   : 9600
System Nvram  : 8192 bytes  ,    Temperature       : 25¡
CPLD Version  : V2.0        ,    FPGA Version      : V1.2
Board Name    : RS-6905-MCS

[NPCI, panel 3]
Main Processor: PowerPC MPC8347EAT Processor
System Memory : 256M bytes  ,    System Flash      : 16M bytes
Board Type    : UMTF        ,    Network Processor : NO
Port Number   : 12          ,    CPLD Version      : V1.2
Temperature   : 25¡
Board Name    : RS-69S2-12GE-SFP4RJ   
Network Processor Status : DISABLE
         
[NPCI, panel 4]
Main Processor: PowerPC MPC8347EAT Processor
System Memory : 256M bytes  ,    System Flash      : 16M bytes
Board Type    : UGSE        ,    Network Processor : NO
Port Number   : 24          ,    CPLD Version      : V1.2
Temperature   : 24¡
Board Name    : RS-69S2-24GE-RJ   
Network Processor Status : DISABLE

internet_6905#show running-config
Building configuration...
!
!
ip dhcp enable
ip dhcp server dns 202.102.224.68 202.102.227.68
ip dhcp server leasetime 18000
!
urpf log off
!
vlan 10
name workstation
ip arp inspection
ip dhcp snooping
!
vlan 20
name to_m5100-ac
!
vlan list 1
!        
         
!        
!        
ip local pool workstation_ip 192.168.0.1 192.168.0.200 255.255.255.0
!        
iptv view-profile name DEFVAL id 0
iptv view-profile name DEFVAL count 3
iptv view-profile name DEFVAL duration 120
iptv view-profile name DEFVAL blackout 60
!        
!        
!        
interface vlan 10
  ip address 192.168.0.254 255.255.255.0
  peer default ip pool workstation_ip
  ip dhcp mode server
  ip dhcp server gateway 192.168.0.254
!        
interface vlan 20
  ip address 192.168.100.1 255.255.255.248
!        
interface null1
!        
interface gei_3/1
  negotiation auto
  ip access-group 120 in
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/2
  negotiation auto
  ip access-group 120 in
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/3
  negotiation auto
  ip access-group 120 in
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/4
  negotiation auto
  ip access-group 120 in
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/5
  negotiation auto
  ip access-group 120 in
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/6
  negotiation auto
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/7
  negotiation auto
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/8
  negotiation auto
  switchport mode trunk
  switchport trunk native vlan 1
  switchport trunk vlan 1
  switchport trunk vlan 10
  switchport qinq normal
!        
interface gei_3/9
  hybrid-attribute copper
  negotiation auto
  switchport access vlan 1
  switchport qinq normal
  monitor session 1 destination
!        
interface gei_3/10
  hybrid-attribute copper
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_3/11
  hybrid-attribute copper
  negotiation auto
  switchport access vlan 20
  switchport qinq normal
  monitor session 1 source direction rx
!        
interface gei_3/12
  hybrid-attribute copper
  negotiation auto
  switchport access vlan 20
  switchport qinq normal
  monitor session 1 source direction rx
!        
interface gei_4/1
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/2
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/3
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/4
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/5
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/6
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/7
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/8
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/9
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/10
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/11
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/12
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/13
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/14
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/15
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/16
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/17
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/18
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/19
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/20
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/21
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/22
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/23
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
interface gei_4/24
  negotiation auto
  switchport access vlan 10
  switchport qinq normal
!        
!        
ip route 0.0.0.0 0.0.0.0 192.168.100.2
!        
multicast-limit 1024
ip igmp snooping
ip igmp snooping proxy
no ip igmp snooping querier
!        
ipv6 mld snooping
!        
!        
!        
acl extended number 120
  rule 1 deny tcp any any eq 135
  rule 2 deny tcp any any eq 136
  rule 3 deny tcp any any eq 137
  rule 4 deny tcp any any eq 138
  rule 5 deny tcp any any eq 139
  rule 6 deny tcp any any eq 389
  rule 7 deny tcp any any eq 445
  rule 8 deny tcp any any eq 4444
  rule 9 deny tcp any any eq 69
  rule 10 deny udp any any eq 135
  rule 11 deny udp any any eq 136
  rule 12 deny udp any any eq 389
  rule 13 deny udp any any eq 445
  rule 14 permit ip any any
!        
nas      
!        
udld message time 15
udld mac  0100.0ccc.cccc
udld recovery disable
udld recovery interval 180
!        
bfd-version 1
!        
!        
!        
!        
version V4.8.11.01
!        
nvram mng-ip-address 10.40.88.173 255.255.0.0
!        
nvram boot-username target
!        
nvram boot-password TARGET
!        
nvram boot-server 10.40.88.170
!        
nvram default-gateway 1.1.1.1
!        
nvram imgfile-location local
!        
hostname internet_6905
!        
enable secret level 15 5 R1dTRQ+EDF8W896h0tXkjQ==
!        
username lyrf password lyrf
username admin password lyrf
!        
user-authentication-type local
user-authorization-type local
!        
line console 0
  no login authentication
!        
banner incoming @
    *************************************************************************
    Welcome to ZXR10 Carrier-class High-end Routing Switch of ZTE Corporation
    *************************************************************************
@        
!        
!        
!        
!        
snmp-server location No.68 Zijinghua Rd. Yuhuatai District, Nanjing, China
snmp-server contact +86-25-52870000
snmp-server packetsize 1400
snmp-server engine-id 830900020300010289d64401
snmp-server user sw-user sw-grp v3 encrypted auth md5 137abd2b4b82f47a70846f952dbcb0b0 priv des56 137abd2b4b82f47a70846f952dbcb
0b0      
snmp-server group sw-grp v3 auth read AllView notify Allview
snmp-server community private view DefaultView rw
snmp-server community public view DefaultView ro
snmp-server view view iso included
snmp-server view AllView internet included
snmp-server view DefaultView system included
snmp-server host 192.168.0.198 trap version 2c public udp-port 161
snmp-server enable inform SNMP
snmp-server enable inform VPN
snmp-server enable inform BGP
snmp-server enable inform OSPF
snmp-server enable inform RMON
snmp-server enable inform STALARM
snmp-server enable trap SNMP
snmp-server enable trap VPN
snmp-server enable trap BGP
snmp-server enable trap OSPF
snmp-server enable trap RMON
snmp-server enable trap STALARM
!        
!        
logging on
logging buffer 200
logging mode fullcycle
logging console notifications
logging level notifications
logging cmdlog-interval 2880
logging timestamps datetime localtime
alarm cpuload-on
alarm cpuload-interval 30
alarm cpuload-threshold high-grade 95 middle-grade 85 low-grade 75
syslog-server facility local0
!        
line console idle-timeout 120
line console absolute-timeout 1440
line telnet idle-timeout 120
line telnet absolute-timeout 1440
!        
ssh server authentication ispgroup 1
ssh server authentication mode local
ssh server authentication type chap
no ssh server only
ssh server version 2
!        
!        
radius auto-change off
!        
!        
tacacs disable
tacacs-server timeout 5
tacacs-server packet 1024
!        
!        
port-status check off
!        
!        
end

中兴ZXR10 6905核心交换机配置案例的更多相关文章

  1. 中兴ZXR10 GER4核心路由器配置案例

    Connecting to 192.168.100.2:23...Connection established.To escape to local shell, press 'Ctrl+Alt+]' ...

  2. Yarn 生产环境核心参数配置案例

    目录 Yarn 生产环境核心参数配置案例 需求 修改yarn-site.xml配置 分发 重启集群 执行WordCount程序 Yarn 生产环境核心参数配置案例 调整下列参数之前要拍摄Linux快照 ...

  3. 华为核心交换机绑定IP+MAC+端口案例

    1         案例背景 某网络改造项目,核心交换机为华为S5700,接入交换机为不同型号交换机,如下模拟拓扑,客户端接入交换机1通过Access模式与核心交换机连接,该交换机下只有一个Vlan2 ...

  4. 锐捷交换机实验案例：vlan间互访的配置与验证

    组网需求: 1.如下图所示,某用户内网被划分为VLAN 10.VLAN 20.VLAN 30,以实现相互间的2 层隔离: 2.3 个VLAN 对应的IP 子网分别为192.168.10.0/24 .1 ...

  5. Cisco 的基本配置实例之四----vlan的规划及配置（核心交换机）

    4.vlan的规划及配置 在本节中我们讲解vlan的规划及具体的配置命令.在此例中我们用的是vtp(VLAN Trunking Protocol)server的模式,在这种模式中我们需要配置核心交换机 ...

  6. 网络访问控制列表ACL（读懂这篇就基本够了，后面有配置案例）

    一.访问控制列表是什么? 访问控制列表(ACL)是一种基于包过滤的访问控制技术,它可以根据设定的条件对接口上的数据包进行过滤,允许其通过或丢弃.访问控制列表被广泛地应用于路由器和三层交换机,借助于访问 ...

  7. 思科交换机配置DHCP的四个方面

    这里我们主要讲解了思科交换机配置DHCP的相关内容.我们对网络拓扑先进行一下了解,然后对于其在进行一下说明,之后对于配置的代码和命令再进行一下解析. 思科交换机配置DHCP一.网络拓扑 思科交换机配置 ...

  8. 烽火R2600交换机配置脚本

    烽火交换机端口映射配置 ip nat inside source static udp iP 端口号 公网iP 端口号 ip nat inside source interface Vlan-intf ...

  9. H3C交换机配置命令（收集）

    1:配置登录用户,口令等 <H3C>                   //用户直行模式提示符,用户视图 <H3C>system-view        //进入配置视图 [ ...

随机推荐

  1. js 联动下拉菜单

    <!doctype html> <html> <head> <meta charset="utf-8"> <title> ...

  2. C语言ctype.h字符函数和字符串

    ctype.h存的是与字符相关的函数: 这些函数虽然不能处理整个字符串,但是可以处理字符串中的字符: ToUpper()函数,利用toupper()函数处理字符串中的每个字符,转换成大写: Punct ...

  3. void类型指针的基本用法

    void作为指针时可以用任意类型的的指针值都可以给它进行赋值和传递,但是输出时必须时显性输出 代码如下: #include<cstdio> #include<iostream> ...

  4. P4824 [USACO15FEB]Censoring (Silver) 审查(银)

    传送门 一个串的匹配肯定考虑KMP 那就暴力KMP 记录一下到每个字符时匹配的位置 找到一个符合的串就标记然后暴力回跳 感觉好像太暴力了... #include<iostream> #in ...

  5. Ansible故障

    常见问题一: [root@m01 ~]# ansible  -k 172.16.1.51 -m ping SSH password: [WARNING]: No hosts matched, noth ...

  6. kafkaconsumer SimpleExample

    package kafka.simple; import java.nio.ByteBuffer; import java.util.ArrayList; import java.util.Colle ...

  7. mysql 中decimal中去掉后面多余的0

    #去除Decimal后面多余的0 #处理前SELECT '0.12000','1.203010','-0.20' #处理后SELECT 0+CAST('0.12000' AS CHAR),0+CAST ...

  8. GC:并行回收CMS详解

    CMS详解 https://www.cnblogs.com/ggjucheng/p/3977612.html CMS默认不回收Perm, 需要加参数 +CMSPermGenSweepingEnable ...

  9. java——线段树 SegmentTree

    应用: 区间染色 区间查询 线段树不是完全二叉树,线段树是平衡二叉树 使用数组来实现线段树:存储空间为4n 以下是使用数组实现的静态线段树: public class SegmentTree<E ...

  10. python_文件 处理

    一.字符编码 内存固定使用unicode编码 数据最先产生于内存中,是unicode格式,要想传输需要转成bytes格式 # unicode -------> enconde( u t f - ...