配置LANMP环境(7)-- 配置nginx反向代理,与配置apache虚拟主机
一、配置nginx反向代理
1.修改配置文件
vim /etc/nginx/nginx.conf
在35行http下添加一下内容:
include /data/nginx/vhosts/*.conf;
include /etc/nginx/upstream.conf;
2.在/etc/nginx/目录下新建 upstream.conf文件
cd /etc/nginx/ vim upstream.conf
upstream dev.one.com {
server 127.0.0.1(换成虚拟机ip): weight= max_fails= fail_timeout=10s;
ip_hash;
} upstream dev.two.com {
server 127.0.0.1(换成虚拟机ip): weight= max_fails= fail_timeout=10s;
ip_hash;
}
3.在/etc/nginx/目录下新建 proxy.conf
vim proxy.conf
写入以下内容:
proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_max_temp_file_size ;
proxy_connect_timeout ;
proxy_send_timeout ;
proxy_read_timeout ;
proxy_buffer_size 4k;
proxy_buffers 32k;
proxy_busy_buffers_size 64k;
proxy_temp_file_write_size 64k;
4.在/data/nginx/vhosts/目录下新建test.conf配置文件
mkdir -p /data/nginx/vhosts
mkdir -p /data/nginx/logs
cd /data/nginx/vhosts
vim test.conf
写入以下内容:
server {
listen 80;
server_name dev.one.com;
charset UTF-8;
access_log /data/nginx/logs/one.access.log combined;
location /{
proxy_pass http://dev.one.com;
#Header
include "/etc/nginx/proxy.conf";
}
error_page 404 /error.html;
location = /error.html {
root /usr/share/nginx/html;
}
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
server {
listen 80;
server_name dev.two.com;
charset UTF-8;
access_log /data/nginx/logs/two.access.log combined;
location /{
proxy_pass http://dev.two.com;
#Header
include "/etc/nginx/proxy.conf";
}
error_page 404 /error.html;
location = /error.html {
root /usr/share/nginx/html;
}
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
}
二、配置apache虚拟主机
1.载入虚拟主机配置文件
vim /etc/httpd/conf/httpd.conf
在文件最低下添加以下内容:
include conf/extra/httpd-vhosts.conf
2.在/etc/httpd/conf/ 目录下新建extra目录,并在extra目录下新建httpd-vhosts.conf配置文件
cd /etc/httpd/conf/ mkdir extra cd /etc/httpd/conf/extra vim httpd-vhosts.conf 添加以下内容:
<VirtualHost 127.0.0.1(换成虚拟机ip):8080>
ServerAdmin "master@master.com"
DocumentRoot "/data/www/one"
ServerName dev.one.com
ErrorLog "/data/httpd/logs/one.net-error.log"
CustomLog "/data/httpd/logs/one.net-access.log" common
<Directory "/">
Options FollowSymLinks
AllowOverride All
Order Deny,Allow
Require all granted
</Directory>
<Directory ".git">
Deny from All
Require all denied
</Directory>
</VirtualHost>
<VirtualHost 127.0.0.1(换成虚拟机ip):8080>
ServerAdmin "master@master.com"
DocumentRoot "/data/www/two"
ServerName dev.two.com
ErrorLog "/data/httpd/logs/two.net-error.log"
CustomLog "/data/httpd/logs/two.net-access.log" common
<Directory "/">
Options FollowSymLinks
AllowOverride All
Order Deny,Allow
Require all granted
</Directory>
<Directory ".git">
Deny from All
Require all denied
</Directory>
</VirtualHost>
2.在/data/httpd/下面创建logs文件夹
mkdir -p /data/httpd/logs
3.创建与配置好之后重启httpd与nginx
systemctl restart httpd systemctl restart nginx
4.配置window的ip解析,打开C:\Windows\System32\drivers\etc下面的hosts文件添加下面三行。
127.0.0.1(换成虚拟机ip) dev.one.com
127.0.0.1(换成虚拟机ip) dev.two.com
5.添加项目目录与测试文件
mkdir -p /data/www/one
mkdir -p /data/www/two
cd /data/www/one
vim index.php 输入以下虚线前的内容:
<?php
echo "one";
phpinfo();
-------------------------------------------------
cd /data/www/test2
vim index.php 输入以下虚线前的内容:
<?php
echo "two";
phpinfo();
-------------------------------------------------
三、检查配置成功与否
全部配置好之后重启nginx和apache,如果重启失败可以用命令status nginx【httpd】,或者journalctl -xe查看那里出现问题。
常见启动失败的原因:
1. logs目录或者其他关键目录没有创建。
2. 防火墙禁用了8080端口
如果一切顺利,全部配置成功则:在浏览器访问dev.one.com会出现对应/data/www/one/index.php文件内容的页面。
四、有可能会因为权限问题而不能访问到apache虚拟主机目录
请参考配置文件的配置
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'. #
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd" #
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:
Listen #
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf #
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache # 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# #
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin root@localhost #
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName 127.0.0.1 #
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
AllowOverride all
Require all granted
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# #
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/data/www" #
# Relax access to content within /var/www.
#
<Directory "/data/www">
AllowOverride All
Require all granted
</Directory> # Further relax access to the default document root:
<Directory "/data/www">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks #
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride all #
# Controls who can get stuff from this server.
#
Require all granted
</Directory> #
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule> #
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
Require all granted
</Files> #
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log" #
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn <IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule> #
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access_log" common #
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access_log" combined
</IfModule> <IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar #
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path. #
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" </IfModule> #
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
# <IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig /etc/mime.types #
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz #
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi # For type maps (negotiated resources):
#AddHandler type-map var #
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule> #
# Specify a default charset for all content served; this enables
# interpretation of all content as UTF-8 by default. To use the
# default browser choice (ISO-8859-1), or to allow the META tags
# in HTML content to override this choice, comment out this
# directive:
#
AddDefaultCharset UTF-8 <IfModule mime_magic_module>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile conf/magic
</IfModule> #
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# #
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults if commented: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
EnableSendfile on # Supplemental configuration
#
# Load config files in the "/etc/httpd/conf.d" directory, if any. IncludeOptional conf.d/*.conf
include /etc/httpd/conf/extra/httpd-vhosts.conf
配置LANMP环境(7)-- 配置nginx反向代理,与配置apache虚拟主机的更多相关文章
- 一台虚拟机配置nginx反向代理+3个apache虚拟主机
三个虚拟主机通过一张网卡添加三个IP来实现 一.安装nginx 1.解决依赖 [root@xuegod1 ~]# yum groupinstall "Development Tools&qu ...
- Nginx反向代理1--基本介绍-虚拟主机
1 Nginx 1.1 什么是nginx Nginx是一款高性能的http 服务器/反向代理服务器及电子邮件(IMAP/POP3)代理服务器.由俄罗斯的程序设计师Igor Sysoev所开发, ...
- 【netcore基础】CentOS 7.6.1810 搭建.net core 2.1 linux 运行环境 nginx反向代理 supervisor配置自启动
之前写过一篇Ubuntu的环境搭建博客,感觉一些配置大同小异,这里重点记录下 nginx 作为静态 angular 项目文件服务器的配置 参考链接 [netcore基础]ubuntu 16.04 搭建 ...
- Centos7 nginx 反向代理的配置
一.正向代理与反向代理 1.正向代理 正向代理往VPN理解 正向代理,也就是传说中的代理,他的工作原理就像一个跳板(VPN),简单的说: 我是一个用户,我访问不了某网站,但是我能访问一个代理服务器,这 ...
- Nginx反向代理的配置
Chapter: Nginx基本操作释疑 1. Nginx的端口修改问题 2. Nginx 301重定向的配置 3. Windows下配置Nginx使之支持PHP 4. Linux下配置Nginx使之 ...
- nginx反向代理的配置优化
作者:守住每一天 blog:liuyu.blog.51cto.combbs:bbs.linuxtone.orgmsn:liuyubj520#hotmail.comemail:liuyu105#gmai ...
- Nginx反向代理搭建配置
1.反向代理方式是指以代理服务器来接受internet上的连接请求,然后将请求转发给内部网络上的服务器,并将服务器上得到的结果返回给internet 上请求连接的客户端,此时代理服务器对外就表现为一个 ...
- Tomcat多个项目部署,通过Nginx反向代理分别配置二级域名的流程
购买域名.示例:example.com 设置多个二级域名.如图: 配置tomcat文件: 修改tomcat/conf目录下的server.xml文件: 如下配置配置了3个容器,使用三个不同的端口. 请 ...
- [svc]tomcat目录结构/虚拟主机/nginx反向代理cache配置
tomcat目录文件 /usr/local/tomcat/bin/catalina.sh stop sleep 3 /usr/local/tomcat/bin/catalina.sh start to ...
- Nginx反向代理websocket配置实例
最近有一个需求,就是需要使用 nginx 反向代理 websocket,经过查找一番资料,目前已经测试通过,本文只做一个记录 复制代码 代码如下: 注: 看官方文档说 Nginx 在 1.3 以后的版 ...
随机推荐
- ASP.NET Core 入门笔记9,ASP.NET Core + Entity Framework Core 数据访问入门
一.前言 1.本教程主要内容 ASP.NET Core MVC 集成 EF Core 介绍&操作步骤 ASP.NET Core MVC 使用 EF Core + Linq to Entity ...
- Angular中ngx-image-cropper图片裁剪的使用
GitHub示例源码地址:https://github.com/luoruiemail/ngx-image-cropper 下载下来之后,执行yarn install安装相关node_modules包 ...
- 基于JAVA Socket的底层原理分析及工具实现
前言 在工作开始之前,我们先来了解一下Socket 所谓Socket,又被称作套接字,它是一个抽象层,简单来说就是存在于不同平台(os)的公共接口.学过网络的同学可以把它理解为基于传输TCP/IP协议 ...
- 13.sqoop的安装
上传sqoop压缩包,并解压 给sqoop一个软链接 给sqoop配置环境变量 #sqoop export SQOOP_HOME=/opt/modules/sqoop export PATH=$P ...
- 19牛客暑期多校 round1 A 有关笛卡尔树的结论
题目传送门//res tp nowcoder 分析 定理:B1~B2当且仅当B1与B2有同构的笛卡尔树. (B₁~B₂ iff B₁ and B₂ have isomorphic Cartesian ...
- Laravel-admin 消息提醒、播放音频、点击跳转
jquery-toastr 消息提醒.播放音频.点击跳转 应用情景,有新的订单生成,后台进行消息提醒并播放音频(这里用到轮询简单实现):下面附代码 1.找到laravel-admin 中的 index ...
- 在 jupyterlab 和 jupyter notebook 中集成conda虚拟环境
在jupyterlab中切换虚拟环境使用jupyter-conda包,参考链接:https://pypi.org/project/jupyter-conda/ Install Requirements ...
- python的文件读写操作
文件读写 本文转自廖雪峰老师的教程https://www.liaoxuefeng.com/wiki/1016959663602400/1017607179232640 读写文件是最常见的IO操作.Py ...
- 并不对劲的复健训练-bzoj5250:loj2473:p4365:[九省联考2018]秘密袭击
题目大意 有一棵\(n\)(\(n\leq 1666\))个点的树,有点权\(d_i\),点权最大值为\(w\)(\(w\leq 1666\)).给出\(k\)(\(k\leq n\)),定义一个选择 ...
- 解决github pages和github .md文件图片不显示
博客园上传的图片,在github上无法显示. 在github项目下建立img文件夹,放上图片 两种方式 项目绝对路径 https://raw.githubusercontent.com/用户名/项目名 ...