Samuraiwtf-解决sshd安装启动
东西没仔细看就给别人了,具体是系统默认的sshd怎么都起不来。于是重新安装一下,过程如下
root@samuraiwtf:~# netstat -nlt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.1.1:53 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
tcp6 0 0 :::443 :::* LISTEN
tcp6 0 0 :::80 :::* LISTEN
root@samuraiwtf:~# /etc/init.d/
acpid grub-common reboot
anacron halt resolvconf
apache2 irqbalance rsync
apparmor kerneloops rsyslog
apport killprocs saned
avahi-daemon kmod sendsigs
bluetooth lightdm single
brltty mysql speech-dispatcher
console-setup networking ssh
cron ondemand sudo
cryptdisks openvpn udev
cryptdisks-early pppd-dns umountfs
cups procps umountnfs.sh
cups-browsed pulseaudio umountroot
dbus rc unattended-upgrades
dns-clean rc.local urandom
friendly-recovery rcS x11-common
root@samuraiwtf:~# /etc/init.d/ssh start
root@samuraiwtf:~# cd /etc/init.d
root@samuraiwtf:/etc/init.d# ls
acpid dbus pppd-dns skeleton
anacron dns-clean procps speech-dispatcher
apache2 friendly-recovery pulseaudio ssh
apparmor grub-common rc sudo
apport halt rc.local udev
avahi-daemon irqbalance rcS umountfs
bluetooth kerneloops README umountnfs.sh
brltty killprocs reboot umountroot
console-setup kmod resolvconf unattended-upgrades
cron lightdm rsync urandom
cryptdisks mysql rsyslog x11-common
cryptdisks-early networking saned
cups ondemand sendsigs
cups-browsed openvpn single
root@samuraiwtf:/etc/init.d# more ssh
...............没有任何问题....................
root@samuraiwtf:/etc/init.d# /etc/init.d/ssh reload
root@samuraiwtf:/etc/init.d# apt-get update
Ign http://dl.google.com stable InRelease
Get:1 http://dl.google.com stable Release.gpg [916 B]
Get:2 http://dl.google.com stable Release [1,189 B]
Get:3 http://security.ubuntu.com trusty-security InRelease [65.9 kB]
Ign http://us.archive.ubuntu.com trusty InRelease
Ign http://archive.canonical.com trusty InRelease
Get:4 http://ppa.launchpad.net trusty InRelease [15.5 kB]
Get:5 http://us.archive.ubuntu.com trusty-updates InRelease [65.9 kB]
Get:6 http://archive.canonical.com trusty Release.gpg [933 B]
Get:7 http://ppa.launchpad.net trusty/main i386 Packages [6,858 B]
Get:8 http://security.ubuntu.com trusty-security/main Sources [118 kB]
Get:9 http://archive.canonical.com trusty Release [9,359 B]
Ign http://extras.ubuntu.com trusty InRelease
Get:10 http://us.archive.ubuntu.com trusty-backports InRelease [65.9 kB]
Get:11 http://security.ubuntu.com trusty-security/restricted Sources [4,064 B]
Get:12 http://extras.ubuntu.com trusty Release.gpg [72 B]
Get:13 http://security.ubuntu.com trusty-security/universe Sources [38.0 kB]
Get:14 http://security.ubuntu.com trusty-security/multiverse Sources [2,760 B]
Get:15 http://security.ubuntu.com trusty-security/main i386 Packages [477 kB]
Get:16 http://archive.canonical.com trusty/partner Sources [10.0 kB]
Get:17 http://extras.ubuntu.com trusty Release [11.9 kB]
Get:18 http://ppa.launchpad.net trusty/main Translation-en [3,553 B]
Get:19 http://us.archive.ubuntu.com trusty Release.gpg [933 B]
Get:20 http://archive.canonical.com trusty/partner i386 Packages [6,285 B]
Get:21 http://us.archive.ubuntu.com trusty-updates/main Sources [380 kB]
Get:22 http://archive.canonical.com trusty/partner Translation-en [4,593 B]
Get:23 http://security.ubuntu.com trusty-security/restricted i386 Packages [12.7 kB]
Get:24 http://security.ubuntu.com trusty-security/universe i386 Packages [131 kB]
Get:25 http://extras.ubuntu.com trusty/main Sources [1,064 kB]
Get:26 http://extras.ubuntu.com trusty/main i386 Packages [1,348 kB]
Get:27 http://security.ubuntu.com trusty-security/multiverse i386 Packages [5,178 B]
Get:28 http://security.ubuntu.com trusty-security/main Translation-en [282 kB]
Get:29 http://extras.ubuntu.com trusty/main Translation-en [762 kB]
Ign http://extras.ubuntu.com trusty/main Translation-en_US
Get:30 http://security.ubuntu.com trusty-security/multiverse Translation-en [2,570 B]
Get:31 http://security.ubuntu.com trusty-security/restricted Translation-en [3,206 B]
Get:32 http://security.ubuntu.com trusty-security/universe Translation-en [77.2 kB]
Get:33 http://us.archive.ubuntu.com trusty-updates/restricted Sources [5,360 B]
Get:34 http://us.archive.ubuntu.com trusty-updates/universe Sources [160 kB]
Get:35 http://us.archive.ubuntu.com trusty-updates/multiverse Sources [7,137 B]
Get:36 http://us.archive.ubuntu.com trusty-updates/main i386 Packages [631 kB]
Get:37 http://us.archive.ubuntu.com trusty-updates/restricted i386 Packages [15.6 kB]
Get:38 http://us.archive.ubuntu.com trusty-updates/universe i386 Packages [369 kB]
Get:39 http://us.archive.ubuntu.com trusty-updates/multiverse i386 Packages [15.2 kB]
Get:40 http://us.archive.ubuntu.com trusty-updates/main Translation-en [423 kB]
Get:41 http://us.archive.ubuntu.com trusty-updates/multiverse Translation-en [7,661 B]
Get:42 http://us.archive.ubuntu.com trusty-updates/restricted Translation-en [3,699 B]
Get:43 http://us.archive.ubuntu.com trusty-updates/universe Translation-en [193 kB]
Get:44 http://us.archive.ubuntu.com trusty Release [58.5 kB]
Get:45 http://us.archive.ubuntu.com trusty-backports/main Sources [9,561 B]
Get:46 http://us.archive.ubuntu.com trusty-backports/restricted Sources [28 B]
Get:47 http://us.archive.ubuntu.com trusty-backports/universe Sources [35.2 kB]
Get:48 http://us.archive.ubuntu.com trusty-backports/multiverse Sources [1,898 B]
Get:49 http://us.archive.ubuntu.com trusty-backports/main i386 Packages [13.3 kB]
Get:50 http://us.archive.ubuntu.com trusty-backports/restricted i386 Packages [28 B]
Get:51 http://us.archive.ubuntu.com trusty-backports/universe i386 Packages [43.2 kB]
Get:52 http://us.archive.ubuntu.com trusty-backports/multiverse i386 Packages [1,552 B]
Get:53 http://us.archive.ubuntu.com trusty-backports/main Translation-en [7,493 B]
Get:54 http://us.archive.ubuntu.com trusty-backports/multiverse Translation-en [1,215 B]
Get:55 http://us.archive.ubuntu.com trusty-backports/restricted Translation-en [28 B]
Get:56 http://us.archive.ubuntu.com trusty-backports/universe Translation-en [36.8 kB]
Get:57 http://us.archive.ubuntu.com trusty/main Sources [1,064 kB]
Get:58 http://us.archive.ubuntu.com trusty/restricted Sources [5,433 B]
Get:59 http://us.archive.ubuntu.com trusty/universe Sources [6,399 kB]
Get:60 http://us.archive.ubuntu.com trusty/multiverse Sources [174 kB]
Get:61 http://us.archive.ubuntu.com trusty/main i386 Packages [1,348 kB]
Get:62 http://us.archive.ubuntu.com trusty/restricted i386 Packages [13.4 kB]
Get:63 http://us.archive.ubuntu.com trusty/universe i386 Packages [5,866 kB]
Get:64 http://us.archive.ubuntu.com trusty/universe i386 Packages [5,866 kB]
Get:65 http://us.archive.ubuntu.com trusty/multiverse i386 Packages [134 kB]
Get:66 http://us.archive.ubuntu.com trusty/main Translation-en [762 kB]
Get:67 http://us.archive.ubuntu.com trusty/multiverse Translation-en [102 kB]
Get:68 http://us.archive.ubuntu.com trusty/restricted Translation-en [3,457 B]
Get:69 http://us.archive.ubuntu.com trusty/universe Translation-en [4,089 kB]
Ign http://us.archive.ubuntu.com trusty/main Translation-en_US
Ign http://us.archive.ubuntu.com trusty/multiverse Translation-en_US
Ign http://us.archive.ubuntu.com trusty/restricted Translation-en_US
Ign http://us.archive.ubuntu.com trusty/universe Translation-en_US
Fetched 22.2 MB in 4min 42s (78.7 kB/s)
W: There is no public key available for the following key IDs:
1397BC53640DB551
W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/stable/Release Unable to find expected entry 'main/binary-i386/Packages' in Release file (Wrong sources.list entry or malformed file)
W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/trusty-updates/main/binary-i386/Packages Hash Sum mismatch
W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/trusty/main/source/Sources Hash Sum mismatch
W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/trusty/main/binary-i386/Packages Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
root@samuraiwtf:/etc/init.d# apt-get install openssh-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
openssh-client
Suggested packages:
libpam-ssh keychain monkeysphere rssh molly-guard
The following packages will be upgraded:
openssh-client openssh-server
2 upgraded, 0 newly installed, 0 to remove and 243 not upgraded.
Need to get 902 kB of archives.
After this operation, 5,120 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://security.ubuntu.com/ubuntu/ trusty-security/main openssh-server i386 1:6.6p1-2ubuntu2.7 [325 kB]
Get:2 http://security.ubuntu.com/ubuntu/ trusty-security/main openssh-client i386 1:6.6p1-2ubuntu2.7 [577 kB]
Fetched 902 kB in 5s (164 kB/s)
Preconfiguring packages ...
(Reading database ... 311843 files and directories currently installed.)
Preparing to unpack .../openssh-server_1%3a6.6p1-2ubuntu2.7_i386.deb ...
Unpacking openssh-server (1:6.6p1-2ubuntu2.7) over (1:6.6p1-2ubuntu2.4) ...
Preparing to unpack .../openssh-client_1%3a6.6p1-2ubuntu2.7_i386.deb ...
Unpacking openssh-client (1:6.6p1-2ubuntu2.7) over (1:6.6p1-2ubuntu2.4) ...
Processing triggers for ureadahead (0.100.0-16) ...
ureadahead will be reprofiled on next reboot
Processing triggers for ufw (0.34~rc-0ubuntu2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Setting up openssh-client (1:6.6p1-2ubuntu2.7) ...
Setting up openssh-server (1:6.6p1-2ubuntu2.7) ...
initctl: Unknown job: ssh
root@samuraiwtf:/etc/init.d# service ssh start
start: Unknown job: ssh
还是无法启动,只有采取强制性的办法了:
root@samuraiwtf:/etc/init.d# sudo /usr/sbin/sshd
Missing privilege separation directory: /var/run/sshd
root@samuraiwtf:/etc/init.d# sudo mkdir /var/run/sshd
root@samuraiwtf:/etc/init.d# sudo /usr/sbin/sshd
root@samuraiwtf:/etc/init.d# netstat -nlt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 127.0.1.1:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:631 :::* LISTEN
tcp6 0 0 :::443 :::* LISTEN
tcp6 0 0 :::80 :::* LISTEN
root@samuraiwtf:/etc/init.d#
OK,问题解决。
Samuraiwtf-解决sshd安装启动的更多相关文章
- sh: /etc/init.d/sshd: not found Docker中的Alpine镜像安装sshd无法启动
问题描述 在Alpine镜像中安装了openssh-server和openssh之后,无法执行ssh localhost.发现未启动服务,开启服务时报以下错误 / # ls /etc/init.d/s ...
- 提示“Web打印服务CLodop未安装启动”的各种原因和解决方法
旧版提示:"CLodop云打印服务(localhost本地)未安装启动!"新版提示:"Web打印服务CLodop未安装启动,点击这里下载执行安装(若此前已安装过,可点这里 ...
- 【转】解决keepalived正常启动但是虚IP(VIP)没有生成的问题
如题所示,keepalived安装配置好之后能够正常启动,但是虚IP并没有生成.接着检查防火墙(iptables)发现也没有相关的限制.稍微郁闷了一下之后,查看了keepalived日志文件,这次成功 ...
- 解决:安装SQL Server 2008 Native Client遇到错误(在Navicat premium新建sqlserver连接时 需要):An error occurred during ...HRESULT: 0x80070422(注意尾部的错误号)
解决:安装SQL Server 2008 Native Client遇到错误(在Navicat premium新建sqlserver连接时 需要):An error occurred during . ...
- nginx入门与实战 安装 启动 配置nginx Nginx状态信息(status)配置 正向代理 反向代理 nginx语法之location详解
nginx入门与实战 网站服务 想必我们大多数人都是通过访问网站而开始接触互联网的吧.我们平时访问的网站服务 就是 Web 网络服务,一般是指允许用户通过浏览器访问到互联网中各种资源的服务. Web ...
- 解决MSDE安装回滚的问题
rem 解决MSDE安装回滚的问题.bat rem 设置为手动rem sc config "LanmanServer" start= DEMAND rem 设置为自动sc conf ...
- 编译安装php5 解决编译安装的php加载不了gd
1. 编译安装php需要的模块: yum install libxml2-devel libxml2 curl curl-devel libpng-devel libpng openssl o ...
- 【linux】U盘安装启动出现press the enter key to begin the installation process 就不动弹了
今天在物理机上安装centOS6.5 64bit 系统的时候,出现了U盘安装启动出现press the enter key to begin the installation process 就不动 ...
- c# windows server安装启动与卸载
使用installutil.exe安装卸载服务时,由于需要指向服务的全路径,由于生成目录往往不是服务发布的最终目录,很不便利,下面介绍两种方式方便操作: 方式一: 项目中加入install.bat与u ...
随机推荐
- 在xcode中设置include和lib路径
最近刚刚开始玩xcode,对着教程学编程时很少要动到项目设置,但昨天晚上想使用freetype验证上篇博文的问题,就需要设置include和lib路径了. 首先我下了freetype的源码,并在本地编 ...
- THE WAY TO HACKER
1/编程篇88课时(预计三个月) 此阶段主要侧重于培养学员发现问题的能力,并对各大平台各个操作系统有一个整体性认知,迅速建立起较高的计算机素养,并形成对于信息安全核心思想的初步探索及认知,为后续专项课 ...
- CodeForces 116C 【BFS】
思路: 求所有树的最大高度? 注意:所有树从树根开始? #include <bits/stdc++.h> using namespace std; typedef long long LL ...
- Spark 性能调优零散知识
1. 如果 Spark 中 CPU 的使用率不够高,可以考虑为当前的程序分配更多的 Executor, 或者增加更多的 Worker 实例来充分的使用多核的潜能 2. 适当设置 Partition 分 ...
- UDP可靠传输简易设计
UDP,鉴于其丢包和乱序(后发先至)问题,为保证其可靠性设计如下报头协议,供大家参考 数据包设计 数据包总大小按照MTU设计设置,小于1500字节 数据包示意图 包头类型说明 1.类型(1字节) 数值 ...
- layui之layer打开table后分页无效的解决方法
1.原代码: <body> <div id="showalladdableavms" style="display: none;width:100%&q ...
- string中执行sql语句
Spring(JdbcTemplate.class)中的queryForMap().queryForObject().queryForLong().queryForInt()等方法都会去调用publi ...
- GUI的最终选择 Tkinter(三):Checkbutton组件和Radiobutton组件、LabelFrame组件
Checkbutton组件 Checkbutton组件就是常见的多选按钮,而Radiobutton则是单选按钮 from tkinter import * root = Tk() v = IntVar ...
- spring学习(四)spring的jdbcTemplate(增删改查封装)
Spring的jdbcTemplate操作 1.Spring框架一站式框架 (1)针对javaee三层,每一层都有解决技术 (2)到dao 层,使用 jdbcTemplate 2.Spring对不同的 ...
- python3 no module named PIL
sudo apt-get install python3-imaging