Failed to allocate the network(s), not rescheduling

在计算节点的/etc/nova/nova.conf中添加下面两句

#Fail instance boot if vif plugging fails vif_plugging_is_fatal = False vif_plugging_timeout = 0

参考:

Failed to allocate the network(s), not rescheduling的更多相关文章

  1. openstack 创建虚拟机的时候报错: Failed to allocate the network(s), not rescheduling.].

    错误: 实例 "test-gtj" 执行所请求操作失败,实例处于错误状态.: 请稍后再试 [错误: Build of instance 5ea8c935-ee07-4788-823 ...

  2. openstack 创建实例报错 **aborted: Failed to allocate the network(s), not rescheduling

    消息 Build of instance 6320b5f2-edc2-4e8e-b07c-0047f7ed8f6a aborted: Failed to allocate the network(s) ...

  3. "cni0" already has an IP address different from 10.244.2.1/24。 Error while adding to cni network: failed to allocate for range 0: no IP addresses available in range set: 10.244.2.1-10.244.2.254

    "cni0" already has an IP address different from 10.244.2.1/24. Error while adding to cni n ...

  4. failed to allocate for range 0: no IP addresses available in range set: 172.20.xx.1-172.20.xx.254

    今天遇到一个机器上的Pod 在创建以后一直处于Init 0/1的状态,进到这个节点查看其kubelet的状态,发现果然有问题 systemctl status kubelet .go:] Contai ...

  5. 解决Failed to allocate memory: 8转

    解决Failed to allocate memory: 8 昨天换了x64的Win7,发现在Eclipse上启动模拟器的时候存在问题,当设置的模拟器分辨率大于400×800的时候会出现 Failed ...

  6. Android 启动模拟器是出现“Failed to allocate memory: 8”错误提示的原因及解决办法

    某天,Android 启动模拟器是出现“Failed to allocate memory: 8”错误,模拟器无法启动,如下图: 原因:设置了不正确AVD显示屏模式,4.0版默认的模式为WVGA800 ...

  7. Android ADT中增大AVD内存后无法启动:emulator failed to allocate memory 8 (转)

    Android ADT中增大AVD内存后无法启动:emulator failed to allocate memory 8http://www.crifan.com/android_emulator_ ...

  8. Failed to allocate memory: 8

    Failed to allocate memory: 8This application has requested the Runtime to terminate it in an unusual ...

  9. 【已解决】Android ADT中增大AVD内存后无法启动:emulator failed to allocate memory 8

    [问题] 折腾: [已解决]Android ADT中增大AVD内存后无法启动:emulator failed to allocate memory 8 过程中,增大对应AVD的内存为2G后,结果无法启 ...

随机推荐

  1. JAVA的核心概念:接口(interface)

    JAVA的核心概念:接口(interface) 接口与类属于同一层次,实际上,接口是一种特殊的抽象类. 如:    interface IA{ }  public interface: 公开接口  与 ...

  2. struct TABLE_SHARE

    struct TABLE_SHARE { TABLE_SHARE() {} /* Remove gcc warning */ /** Category of this table. */ TABLE_ ...

  3. 定义 androidlistview 滚动条位置

    1.找到每一页的最后一条数据的位置 public void onScroll(AbsListView view, int firstVisibleItem, int visibleItemCount, ...

  4. VI使用的小白教程

    vi 使用方法vi编辑器是所有Unix及Linux系统下标准的编辑器,它的强 大不逊色于任何最新的文本编辑器,这里只是简单地介绍一下它的用法和一小部分指令.由于对Unix及Linux系统的任何版本,v ...

  5. Xcode5 编译ffmpeg,arm64版本;H264

    编译选项:./configure  —-cc=/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchai ...

  6. busybox filesystem ifup

    /******************************************************************** * busybox filesystem ifup * 声明 ...

  7. apache开源项目 -- Tuscany

    tuscany是Apache组织关于SOA实现的一个开放源码的工程项目,目前处于孵化期阶段. 该项目主要基于SCA,SDO,DAS等技术上实现的. SCA 的基本概念以及 SCA 规范的具体内容并不在 ...

  8. poj 3160 Father Christmas flymouse

    // 题目描述:从武汉大学ACM集训队退役后,flymouse 做起了志愿者,帮助集训队做一些琐碎的事情,比如打扫集训用的机房等等.当圣诞节来临时,flymouse打扮成圣诞老人给集训队员发放礼物.集 ...

  9. 安装服务Memcached+Nginx+Php linux下安装

    Memcached安装 1.      源码安装libevent(下载地址:http://monkey.org/~provos/libevent/) 2.      源码安装memcached(下载地 ...

  10. 《C++ Primer 4th》读书笔记 第8章-标准IO库

    原创文章,转载请注明出处:http://www.cnblogs.com/DayByDay/p/3936457.html