Here share with you on how to make remote key fob for 2002 BMW 3 series:
Method 1:
1. Working within the vehicle and with the doors shut.
2. Turn the ignition to position 1 and come back to off within 5 seconds.
3. Remove the key from ignition and press and hold the unlocked button
for 15 seconds. While within 15 seconds, you need to press the key lock
button 3 times within 5 seconds.
4. Release both button.
5. Door will lock and unlock to show correct programming has occurred.
Method 2:
Alternate if you do not have a working remote:
1. Turn key to position 1 five times very quickly.
2. Remote key
3. Hold unlock button then press lock button 3 times, release unlock button.
4. If you have another key do the same button pressing within 30 seconds.
5. Turn on ignition to finalize.
Note: This programming procedure programs the remote control part of
the key. Any transponder chip for the immobilizer (starting of car) will
not be programmed and must be done by a specialist. You will need to
visit your local dealer or locksmith to have your remote programmed to
your car using diagnostic equipment.
Method 3:
To do this procedure you need to have one working key and one key that need to be programmed.
1. Get in and close all doors.
2. Turn on the ignition and turn off quickly. (No more than 5 seconds)
to start the process. Next action must take place within 30 seconds.
3. Remove the 1st key.
4. Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.
5. Hold down the unlock button and press the lock button 3 times.
Release the unlock button and the doors lock which confirms the
operation.
6. Quickly repeat steps 4 & 5 for key #2 etc.
If it does not work, try doing the keys in opposite order.
So far, all above are 3 methods on remote key fob instructions.
In addition, to prepare for yourself really powerful car key programmer
is also an efficient way, especially when you are badly in need. Here
EOBD2 list several best-sold powerful key programmers for your
reference, like AK500+ key programmer, SKP900 and more.
For car key programmer detailed information, please check following link: http://www.eobd2.fr/wholesale/programmateur-de-cls/

How to make remote key fob for 2002 BMW 3 series的更多相关文章

  1. Lonsdor K518ISE free update news on what makes and year can work

    Lonsdor K518ISE engineers recently tested a number of cars and verified working great, below are tes ...

  2. How to use BMW Multi Tool 7.3 to replace lost key for BMW X1

    BMW Multi Tool 7.3 version is a high quality auto key programmer that supports CAS 1, CAS2, CAS3, CA ...

  3. 设备管理 USB ID

    发现个USB ID站点,对于做设备管理识别的小伙伴特别实用 http://www.linux-usb.org/usb.ids 附录: # # List of USB ID's # # Maintain ...

  4. RFID 读写器 Reader Writer Cloner

    RFID读写器的工作原理 RFID的数据采集以读写器为主导,RFID读写器是一种通过无线通信,实现对标签识别和内存数据的读出和写入操作的装置. 读写器又称为阅读器或读头(Reader).查询器(Int ...

  5. Autel MaxiTPMS TS601 Wireless TPMS Sensor Reset Relearn Activate Programming Tool

    Why Choose Autel TPMS TS601? MaxiTPMS TS601 is a TPMS tool with highest performance in the world. It ...

  6. Spring中@Cacheable的用法

    在Spring中通过获取MemCachedClient来实现与memcached服务器进行数据读取的方式.不过,在实际开发中,我们往往是通过Spring的@Cacheable来实现数据的缓存的,所以, ...

  7. 基于zookeeper的远程方法调用(RMI)的实现

    采用zookeeper的命名服务,采用不同的目录结构存储不同模块不同服务的rmi的url,使用key来对应不同的服务.同时采用zookeeper解决了单点问题. 当有两个相同的服务注册时,因为采用的是 ...

  8. POJ 1201 Intervals(图论-差分约束)

    Intervals Time Limit: 2000MS   Memory Limit: 65536K Total Submissions: 20779   Accepted: 7863 Descri ...

  9. DevExpress.XtraCharts.chartControl

    private Dictionary<string, double> chartPieDataDic = new Dictionary<string, double>(); p ...

随机推荐

  1. keil编译时出现*** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL

    *** WARNING L2: REFERENCE MADE TO UNRESOLVED EXTERNAL *** WARNING L1: UNRESOLVED EXTERNAL SYMBOL 解决: ...

  2. linux which 查看可执行文件的位置

    我们经常在linux要查找某个文件,但不知道放在哪里了,可以使用下面的一些命令来搜索:        which  查看可执行文件的位置.       whereis 查看文件的位置.         ...

  3. emWin(ucGUI)在PC机上模拟的按键响应多次解决办法 worldsing

    emWin(ucgui) 在PC端的模拟器,默认的按键机制是"按抬都Msg",当在按下键盘时,会收到一个key值-1,在按键没有离开时一直维持,当按键松开时还发送一个key值-0的 ...

  4. 深入DNS

    什么是DNS? 我说前面说过http如何发送请求.这里的第一步就是将域名变为ip地址 如何将域名变为ip地址我们就得用到域名解析(DNS). 如何进行域名解析的? 第一步:在浏览器的url里输入域名, ...

  5. Linux内核完全注释之编程语言和环境(二)

    c程序的编译和链接 使用gcc汇编器编译c语言程序时通常会经历四个阶段,即预处理阶段.编译阶段.汇编阶段.链接阶段,如下图. 例如: gcc -o hello hello.c 生成可执行文件hello ...

  6. 开机自动播放音乐的vbs

    今天无意间看到了vbs这小玩意,就突发奇想,自学了一下,倒弄出如下的小玩意,大牛勿喷!这个可用做撩妹神技也可以用于提醒自己!使用方法:复制程序到txt文本里面保存,然后改后缀为vbs,丢到C:\Pro ...

  7. c#学习之旅------01

    一.交换两个数的值 //交换两个数的值 #region 方法一 , num2 = ;//待交换的两个数值 int temp;//临时变量 temp = num1; num1 = num2; num2 ...

  8. android Scroller类的理解

    Scroller 一个特例: **点击Button后可能View没有移动,要关闭硬件加速,这段代码中int detalX = (int) (event.getX() - downX)要更正. demo ...

  9. How do I place a group of functions or variables in a specific section?

    http://supp.iar.com/Support/?Note=27498 EWARM v5.xx (and newer) The placement of a few functions in ...

  10. 【转】REST on Rails指南

    REST on Rails指南1:理解资源 这是来自http://www.softiesonrails.com的REST简明指南. PART I 在理解REST on Rails之前,有必要先思考一下 ...