realsense SDK编译 release

1>------ 已启动生成: 项目: ZERO_CHECK, 配置: Release x64 ------
1> Checking Build System
1> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/realsense-file/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/wrappers/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/src/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/src/gl/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/hello-realsense/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/software-device/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/capture/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/callback/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/save-to-disk/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/multicam/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pointcloud/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/align/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/align-advanced/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/sensor-control/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/measure/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/depth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/color/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/C/distance/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/post-processing/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/record-playback/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/motion/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/gl/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-predict/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-and-image/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/trajectory/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/ar-basic/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-apriltag/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/examples/tracking-and-depth/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/convert/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/enumerate-devices/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-logger/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/terminal/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/recorder/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-update/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/data-collect/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/realsense-viewer/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/depth-quality/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/rosbag-inspector/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/tools/benchmark/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/fw/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/src/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/tools/CMakeFiles/generate.stamp is up-to-date.
1> CMake does not need to re-run because E:/LibRealsense/build/common/fw/CMakeFiles/generate.stamp is up-to-date.
2>------ 已启动生成: 项目: libusb (ExternalProjectTargets\libusb\libusb), 配置: Release x64 ------
3>------ 已启动生成: 项目: fw, 配置: Release x64 ------
4>------ 已启动生成: 项目: realsense-file, 配置: Release x64 ------
5>------ 已启动生成: 项目: glfw, 配置: Release x64 ------
6>------ 已启动生成: 项目: uvc_fw, 配置: Release x64 ------
2> Creating directories for 'libusb'
4> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/realsense-file/CMakeLists.txt
3> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/libtm/fw/CMakeLists.txt
5> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/glfw/src/CMakeLists.txt
6> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/common/fw/CMakeLists.txt
4> CMake does not need to re-run because E:/LibRealsense/build/third-party/realsense-file/CMakeFiles/generate.stamp is up-to-date.
3> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/fw/CMakeFiles/generate.stamp is up-to-date.
2> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/CMakeLists.txt
5> CMake does not need to re-run because E:/LibRealsense/build/third-party/glfw/src/CMakeFiles/generate.stamp is up-to-date.
6> CMake does not need to re-run because E:/LibRealsense/build/common/fw/CMakeFiles/generate.stamp is up-to-date.
2> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
2> Performing download step (git clone) for 'libusb'
2> -- Avoiding repeated git clone, stamp file is up to date: 'E:/LibRealsense/build/libusb-prefix/src/libusb-stamp/libusb-gitclone-lastrun.txt'
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
2> Performing update step for 'libusb'
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
3> empty.c
3> fw_target.c
3> fw_central_app.c
3>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
2> No patch step for 'libusb'
3> fw_central_bl.c
5> context.c
4> lz4.c
6> empty.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> init.c
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> D4XX_FW_Image.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> lz4s.c
5> input.c
6> D4XX_RC_Image.c
4> xxhash.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> monitor.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
6> SR3XX_FW_Image.c
5> vulkan.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> window.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> win32_init.c
5>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
5> win32_joystick.c
2> Performing configure step for 'libusb'
2> -- Selecting Windows SDK version 10.0.17134.0 to target Windows 10.0.18362.
2> -- Configuring done
2> -- Generating done
2> -- Build files have been written to: E:/LibRealsense/build/libusb-prefix/src/libusb-build
2> Performing build step for 'libusb'
5> win32_monitor.c
5> win32_time.c
5> win32_thread.c
5> win32_window.c
5> wgl_context.c
5> egl_context.c
5> osmesa_context.c
2> Microsoft (R) 生成引擎版本 14.0.25420.1
2> 版权所有(C) Microsoft Corporation。保留所有权利。
2>
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> console.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> debug.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> header.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> bag.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> bag_player.cpp
2> 生成启动时间为 2019/10/9 7:33:55。
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> buffer.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> chunked_file.cpp
4>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
4> lz4_stream.cpp
4> message_instance.cpp
4> query.cpp
4> stream.cpp
4> uncompressed_stream.cpp
4> view.cpp
4> serialization.cpp
4> duration.cpp
2> 节点 1 上的项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(默认目标)。
2> 项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(1)正在节点 1 上生成“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ZERO_CHECK.vcxproj”(2) (默认目标)。
2> PrepareForBuild:
2> 正在创建目录“x64\Release\ZERO_CHECK\”。
2> 正在创建目录“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\”。
2> InitializeBuildStatus:
2> 正在创建“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
4> rate.cpp
4> time.cpp
2> CustomBuild:
2> Checking Build System
2> CMake does not need to re-run because E:/LibRealsense/build/libusb-prefix/src/libusb-build/CMakeFiles/generate.stamp is up-to-date.
2> FinalizeBuildStatus:
2> 正在删除文件“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\unsuccessfulbuild”。
2> 正在对“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\ZERO_CHECK.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ZERO_CHECK.vcxproj”(默认目标)的操作。
2> 项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(1)正在节点 1 上生成“E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj”(3) (默认目标)。
2> PrepareForBuild:
2> 正在创建目录“usb.dir\Release\”。
2> 正在创建目录“E:\LibRealsense\build\libusb-prefix\src\libusb-build\Release\”。
2> 正在创建目录“usb.dir\Release\usb.tlog\”。
2> InitializeBuildStatus:
2> 正在创建“usb.dir\Release\usb.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> Building Custom Rule E:/LibRealsense/build/third-party/libusb/CMakeLists.txt
2> CMake does not need to re-run because E:/LibRealsense/build/libusb-prefix/src/libusb-build/CMakeFiles/generate.stamp is up-to-date.
2> ClCompile:
2> E:\Visual Studio 2015\install\VC\bin\x86_amd64\CL.exe /c /I"E:\LibRealsense\build\third-party\libusb\libusb" /I"E:\LibRealsense\build\third-party\libusb\libusb\os" /I"E:\LibRealsense\build\third-party\libusb\msvc" /nologo /W3 /WX- /O2 /Ob2 /D WIN32 /D _WINDOWS /D NDEBUG /D "CMAKE_INTDIR=\"Release\"" /D NDEBUG /D _CONSOLE /D _CRT_SECURE_NO_WARNINGS /D _MBCS /Gm- /MT /GS /fp:precise /Zc:wchar_t /Zc:forScope /Zc:inline /Fo"usb.dir\Release\\" /Fd"usb.dir\Release\usb.pdb" /Gd /TC /errorReport:queue /SAFESEH:NO /utf-8 "E:\LibRealsense\build\third-party\libusb\libusb\core.c" "E:\LibRealsense\build\third-party\libusb\libusb\descriptor.c" "E:\LibRealsense\build\third-party\libusb\libusb\hotplug.c" "E:\LibRealsense\build\third-party\libusb\libusb\io.c" "E:\LibRealsense\build\third-party\libusb\libusb\strerror.c" "E:\LibRealsense\build\third-party\libusb\libusb\sync.c" "E:\LibRealsense\build\third-party\libusb\libusb\os\threads_windows.c" "E:\LibRealsense\build\third-party\libusb\libusb\os\poll_windows.c" "E:\LibRealsense\build\third-party\libusb\libusb\os\windows_winusb.c" "E:\LibRealsense\build\third-party\libusb\libusb\os\windows_nt_common.c" "E:\LibRealsense\build\third-party\libusb\libusb\os\windows_usbdk.c"
2>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO” [E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj]
2> core.c
2> descriptor.c
2> hotplug.c
2> io.c
2> strerror.c
2> sync.c
2> threads_windows.c
2> poll_windows.c
2> windows_winusb.c
2> windows_nt_common.c
2> windows_usbdk.c
2> 正在生成代码...
2> Lib:
2> E:\Visual Studio 2015\install\VC\bin\x86_amd64\Lib.exe /OUT:"E:\LibRealsense\build\libusb-prefix\src\libusb-build\Release\usb.lib" /NOLOGO /MACHINE:X64 /machine:x64 usb.dir\Release\core.obj
2> usb.dir\Release\descriptor.obj
2> usb.dir\Release\hotplug.obj
2> usb.dir\Release\io.obj
2> usb.dir\Release\strerror.obj
2> usb.dir\Release\sync.obj
2> usb.dir\Release\threads_windows.obj
2> usb.dir\Release\poll_windows.obj
2> usb.dir\Release\windows_winusb.obj
2> usb.dir\Release\windows_nt_common.obj
2> usb.dir\Release\windows_usbdk.obj
2> usb.vcxproj -> E:\LibRealsense\build\libusb-prefix\src\libusb-build\Release\usb.lib
2> FinalizeBuildStatus:
2> 正在删除文件“usb.dir\Release\usb.tlog\unsuccessfulbuild”。
2> 正在对“usb.dir\Release\usb.tlog\usb.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj”(默认目标)的操作。
2> PrepareForBuild:
2> 正在创建目录“x64\Release\ALL_BUILD\”。
2> 正在创建目录“x64\Release\ALL_BUILD\ALL_BUILD.tlog\”。
2> InitializeBuildStatus:
2> 正在创建“x64\Release\ALL_BUILD\ALL_BUILD.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> FinalizeBuildStatus:
2> 正在删除文件“x64\Release\ALL_BUILD\ALL_BUILD.tlog\unsuccessfulbuild”。
2> 正在对“x64\Release\ALL_BUILD\ALL_BUILD.tlog\ALL_BUILD.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(默认目标)的操作。
2>
2> 已成功生成。
2>
2> “E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(默认目标) (1) ->
2> “E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj”(默认目标) (3) ->
2> (ClCompile 目标) ->
2>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO” [E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj]
2>
2> 1 个警告
2> 0 个错误
2>
2> 已用时间 00:00:10.05
2> Performing install step for 'libusb'
2> Microsoft (R) 生成引擎版本 14.0.25420.1
2> 版权所有(C) Microsoft Corporation。保留所有权利。
2>
2> 生成启动时间为 2019/10/9 7:34:05。
2> 节点 1 上的项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\install.vcxproj”(默认目标)。
2> 项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\install.vcxproj”(1)正在节点 1 上生成“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ZERO_CHECK.vcxproj”(2) (默认目标)。
2> InitializeBuildStatus:
2> 正在创建“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> 所有输出均为最新。
2> FinalizeBuildStatus:
2> 正在删除文件“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\unsuccessfulbuild”。
2> 正在对“x64\Release\ZERO_CHECK\ZERO_CHECK.tlog\ZERO_CHECK.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ZERO_CHECK.vcxproj”(默认目标)的操作。
2> 项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\install.vcxproj”(1)正在节点 1 上生成“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(3) (默认目标)。
2> 项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(3)正在节点 1 上生成“E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj”(4) (默认目标)。
2> InitializeBuildStatus:
2> 正在创建“usb.dir\Release\usb.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> CustomBuild:
2> 所有输出均为最新。
2> ClCompile:
2> 所有输出均为最新。
2> Lib:
2> 所有输出均为最新。
2> usb.vcxproj -> E:\LibRealsense\build\libusb-prefix\src\libusb-build\Release\usb.lib
2> FinalizeBuildStatus:
2> 正在删除文件“usb.dir\Release\usb.tlog\unsuccessfulbuild”。
2> 正在对“usb.dir\Release\usb.tlog\usb.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\usb.vcxproj”(默认目标)的操作。
2> InitializeBuildStatus:
2> 正在创建“x64\Release\ALL_BUILD\ALL_BUILD.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> FinalizeBuildStatus:
2> 正在删除文件“x64\Release\ALL_BUILD\ALL_BUILD.tlog\unsuccessfulbuild”。
2> 正在对“x64\Release\ALL_BUILD\ALL_BUILD.tlog\ALL_BUILD.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\ALL_BUILD.vcxproj”(默认目标)的操作。
2> PrepareForBuild:
2> 正在创建目录“x64\Release\INSTALL\”。
2> 正在创建目录“x64\Release\INSTALL\INSTALL.tlog\”。
2> InitializeBuildStatus:
2> 正在创建“x64\Release\INSTALL\INSTALL.tlog\unsuccessfulbuild”，因为已指定“AlwaysCreate”。
2> PostBuildEvent:
2> setlocal
2> E:\CMake\cmake-3.12.0-rc1-win64-x64\bin\cmake.exe -DBUILD_TYPE=Release -P cmake_install.cmake
2> if %errorlevel% neq 0 goto :cmEnd
2> :cmEnd
2> endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
2> :cmErrorLevel
2> exit /b %1
2> :cmDone
2> if %errorlevel% neq 0 goto :VCEnd
2> :VCEnd
2> -- Install configuration: "Release"
2> -- Installing: E:/LibRealsense/build/libusb_install/lib/usb.lib
2> FinalizeBuildStatus:
2> 正在删除文件“x64\Release\INSTALL\INSTALL.tlog\unsuccessfulbuild”。
2> 正在对“x64\Release\INSTALL\INSTALL.tlog\INSTALL.lastbuildstate”执行 Touch 任务。
2> 已完成生成项目“E:\LibRealsense\build\libusb-prefix\src\libusb-build\install.vcxproj”(默认目标)的操作。
2>
2> 已成功生成。
2> 0 个警告
2> 0 个错误
2>
2> 已用时间 00:00:01.19
2> No test step for 'libusb'
2> Completed 'libusb'
6> uvc_fw.vcxproj -> E:\LibRealsense\build\common\fw\Release\uvc_fw.lib
5> glfw.vcxproj -> E:\LibRealsense\build\third-party\glfw\src\Release\glfw3.lib
4> realsense-file.vcxproj -> E:\LibRealsense\build\third-party\realsense-file\Release\realsense-file.lib
6> Microsoft (R) Windows (R) Resource Compiler Version 10.0.10011.16384
6>
6> Copyright (C) Microsoft Corporation. All rights reserved.
6>
6>
3> fw.vcxproj -> E:\LibRealsense\build\third-party\libtm\fw\Release\fw.lib
3> Microsoft (R) Windows (R) Resource Compiler Version 10.0.10011.16384
3>
3> Copyright (C) Microsoft Corporation. All rights reserved.
3>
3>
7>------ 已启动生成: 项目: tm, 配置: Release x64 ------
7> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/third-party/libtm/libtm/src/CMakeLists.txt
7> CMake does not need to re-run because E:/LibRealsense/build/third-party/libtm/libtm/src/CMakeFiles/generate.stamp is up-to-date.
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> Manager.cpp
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> Device.cpp
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> UsbPlugListener.cpp
7> Common.cpp
7> Log.cpp
7> Dispatcher.cpp
7> Fsm.cpp
7>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
7> Utils.cpp
7> Event_lin.cpp
7> Event_bsd.cpp
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.cpp)
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Fsm.cpp)
7>E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\UsbPlugListener.cpp)
7> Event_win.cpp
7>E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\Manager.cpp)
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\Common.cpp)
7> Poller_lin.cpp
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\infra\Dispatcher.h(138): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\Device.cpp)
7> Poller_win.cpp
7> Poller_bsd.cpp
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\UsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\UsbPlugListener.cpp)
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\UsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\Manager.cpp)
7>e:\librealsense\librealsense-2.29.0\third-party\libtm\libtm\src\UsbPlugListener.h(48): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\third-party\libtm\libtm\src\Device.cpp)
7> tm.vcxproj -> E:\LibRealsense\build\third-party\libtm\libtm\src\Release\tm.lib
8>------ 已启动生成: 项目: realsense2, 配置: Release x64 ------
8> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/CMakeLists.txt
8> CMake does not need to re-run because E:/LibRealsense/build/CMakeFiles/generate.stamp is up-to-date.
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-options.cpp
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> ds5-timestamp.cpp
8> ds5-private.cpp
8> ds5-motion.cpp
8> ds5-nonmonochrome.cpp
8> ds5-device.cpp
8> ds5-color.cpp
8> ds5-active.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\ds5\ds5-device.cpp(160): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\ds5\ds5-device.cpp(172): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\ds5\ds5-device.cpp(188): warning C4244: “初始化”: 从“uint32_t”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\ds5\ds5-device.cpp(206): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8> ds5-factory.cpp
8> ds5-fw-update-device.cpp
8> rs_advanced_mode.cpp
8> presets.cpp
8> advanced_mode.cpp
8> ivcam-private.cpp
8> sr300.cpp
8> sr300-fw-update-device.cpp
8> l500-depth.cpp
8> l500-private.cpp
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500\l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-depth.cpp)
8> l500-color.cpp
8> l500-device.cpp
8> l500-motion.cpp
8> l500-factory.cpp
8> l500-fw-update-device.cpp
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(249): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(261): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(277): warning C4244: “初始化”: 从“uint32_t”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(295): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8> record_device.cpp
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8>e:\librealsense\librealsense-2.29.0\src\hw-monitor.h(337): warning C4804: “+=”: 在操作中使用类型“bool”不安全 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(71): note: 参见对正在编译的函数模板实例化“T librealsense::hw_monitor::get_gvd_field<bool>(const std::vector<uint8_t,std::allocator<_Ty>> &,std::size_t)”的引用
8> with
8> [
8> T=bool,
8> _Ty=uint8_t
8> ]
8>e:\librealsense\librealsense-2.29.0\src\hw-monitor.h(337): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8>E:\Visual Studio 2015\install\VC\include\utility(172): warning C4244: “初始化”: 从“int”转换到“const float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(127): note: 参见对正在编译的函数模板实例化“std::pair<const _Kty,_Ty>::pair<int,const char(&)[11],void,0>(_Other1 &&,_Other2) noexcept(false)”的引用
8> with
8> [
8> _Kty=float,
8> _Ty=std::string,
8> _Other1=int,
8> _Other2=const char (&)[11]
8> ]
8> E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp(121): note: 参见对正在编译的函数模板实例化“std::pair<const _Kty,_Ty>::pair<int,const char(&)[11],void,0>(_Other1 &&,_Other2) noexcept(false)”的引用
8> with
8> [
8> _Kty=float,
8> _Ty=std::string,
8> _Other1=int,
8> _Other2=const char (&)[11]
8> ]
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500\l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-color.cpp)
8> record_sensor.cpp
8> playback_device.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500\l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-device.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500\l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-motion.cpp)
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500\l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\l500\l500-factory.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_device.cpp)
8> playback_sensor.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\record\record_sensor.cpp)
8> ros_reader.cpp
8> ros_writer.cpp
8> sql.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\mock\sql.cpp(74): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
8> recorder.cpp
8>e:\librealsense\librealsense-2.29.0\src\media\playback\playback_sensor.h(115): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp(250): note: 参见对正在编译的函数模板实例化“void librealsense::playback_sensor::handle_frame<librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_aad55996dde2f597b35c47176bbc58ab>,librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_3c79aff504ac0b0c2d92d4cdd85423b1>,librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_e73003d4fbf48dfdcd5375273af0f1cd>>(librealsense::frame_holder,bool,T,K,P)”的引用
8> with
8> [
8> T=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_aad55996dde2f597b35c47176bbc58ab>,
8> K=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_3c79aff504ac0b0c2d92d4cdd85423b1>,
8> P=librealsense::playback_device::seek_to_time::<lambda_a82024d8314796ec647998d41cc6e6e1>::()::<lambda_e73003d4fbf48dfdcd5375273af0f1cd>
8> ]
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_device.cpp)
8> sse-align.cpp
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> sse-pointcloud.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\playback\playback_sensor.cpp)
8> processing-blocks-factory.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_writer.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\media\ros\ros_reader.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\proc\sse\sse-pointcloud.cpp(178): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\proc\sse\sse-pointcloud.cpp(179): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\proc\sse\sse-pointcloud.cpp(209): warning C4244: “参数”: 从“const rs2_distortion”转换到“float”，可能丢失数据
8> align.cpp
8> colorizer.cpp
8> pointcloud.cpp
8> occlusion-filter.cpp
8> synthetic-stream.cpp
8> syncer-processing-block.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> E:\Visual Studio 2015\install\VC\include\type_traits(348): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(526): note: 参见对正在编译的类模板实例化“std::is_convertible<_Ty2 *,_Ty *>”的引用
8> with
8> [
8> _Ty2=librealsense::ptr_option<bool>,
8> _Ty=librealsense::option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8>e:\librealsense\librealsense-2.29.0\src\proc\colorizer.h(110): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp(254): note: 参见对正在编译的函数模板实例化“void librealsense::colorizer::update_histogram<float>(int *,const T *,int,int)”的引用
8> with
8> [
8> T=float
8> ]
8>e:\librealsense\librealsense-2.29.0\src\proc\colorizer.h(143): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> e:\librealsense\librealsense-2.29.0\src\proc\colorizer.h(133): note: 参见对正在编译的函数模板实例化“void librealsense::colorizer::colorize_pixel<T,F>(uint8_t *,int,librealsense::color_map *,T,F)”的引用
8> with
8> [
8> T=float,
8> F=librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\proc\colorizer.cpp(281): note: 参见对正在编译的函数模板实例化“void librealsense::colorizer::make_rgb_data<float,librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>>(const T *,uint8_t *,int,int,F)”的引用
8> with
8> [
8> T=float,
8> F=librealsense::colorizer::process_frame::<lambda_d07f9156c8f2b5d75c10713aaf13ba78>::()::<lambda_fc61eefbd585097c218d73103f1648f4>
8> ]
8>E:\LibRealsense\librealsense-2.29.0\src\proc\synthetic-stream.cpp(163): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\proc\synthetic-stream.cpp(179): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
8> decimation-filter.cpp
8> spatial-filter.cpp
8> temporal-filter.cpp
8> hole-filling-filter.cpp
8> disparity-transform.cpp
8> yuy2rgb.cpp
8> threshold.cpp
8> rates-printer.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\proc\rates-printer.cpp(30): warning C4244: “初始化”: 从“__int64”转换到“double”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\proc\rates-printer.cpp(76): warning C4244: “=”: 从“unsigned __int64”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\proc\rates-printer.cpp(84): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\disparity-transform.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\disparity-transform.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\proc\disparity-transform.cpp(28): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用
8> zero-order.cpp
8> units-transform.cpp
8> pipeline.cpp
8> config.cpp
8> profile.cpp
8> aggregator.cpp
8> fw-update-device.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(343): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\proc\units-transform.cpp(55): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8> fw-update-factory.cpp
8>E:\Visual Studio 2015\install\VC\include\utility(172): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(376): note: 参见对正在编译的函数模板实例化“std::pair<int,int>::pair<float&,float&,void,0>(_Other1,_Other2) noexcept”的引用
8> with
8> [
8> _Other1=float &,
8> _Other2=float &
8> ]
8> E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(376): note: 参见对正在编译的函数模板实例化“std::pair<int,int>::pair<float&,float&,void,0>(_Other1,_Other2) noexcept”的引用
8> with
8> [
8> _Other1=float &,
8> _Other2=float &
8> ]
8>E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(145): warning C4244: “参数”: 从“const float”转换到“int”，可能丢失数据
8> E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(447): note: 参见对正在编译的函数模板实例化“bool librealsense::zero_order_invalidation<librealsense::zero_order::process_frame::<lambda_ab025f9d742477f9e511aed9219bf3f9>>(const uint16_t *,const uint8_t *,T,const rs2::vertex *,rs2_intrinsics,const librealsense::zero_order_options &,int,int)”的引用
8> with
8> [
8> T=librealsense::zero_order::process_frame::<lambda_ab025f9d742477f9e511aed9219bf3f9>
8> ]
8>E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(153): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8> with
8> [
8> _Ty=librealsense::ptr_option<float>
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8> with
8> [
8> _Ty=librealsense::ptr_option<float>
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\proc\zero-order.cpp(216): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::ptr_option<float>> std::make_shared<librealsense::ptr_option<float>,int,int,int,int,float*,const char(&)[9]>(int &&,int &&,int &&,int &&,float *&&,const char (&)[9])”的引用
8>E:\LibRealsense\librealsense-2.29.0\src\fw-update\fw-update-device.cpp(70): warning C4800: “uint16_t”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:\LibRealsense\librealsense-2.29.0\src\fw-update\fw-update-device.cpp(135): warning C4267: “初始化”: 从“size_t”转换到“uint16_t”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\fw-update\fw-update-device.cpp(147): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> fw-update-unsigned.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\pipeline.cpp)
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\pipeline\profile.cpp)
8> win-helpers.cpp
8> interface-winusb.cpp
8> device-winusb.cpp
8> enumerator-winusb.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\win\win-helpers.cpp(409): warning C4267: “参数”: 从“size_t”转换到“ULONG”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\win\win-helpers.cpp(506): warning C4267: “参数”: 从“size_t”转换到“DWORD”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\win\win-helpers.cpp(544): warning C4267: “参数”: 从“size_t”转换到“DWORD”，可能丢失数据
8> messenger-winusb.cpp
8> mf-uvc.cpp
8> mf-hid.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\winusb\enumerator-winusb.cpp(59): warning C4018: “<”: 有符号/无符号不匹配
8>E:\LibRealsense\librealsense-2.29.0\src\winusb\enumerator-winusb.cpp(64): warning C4267: “+=”: 从“size_t”转换到“int”，可能丢失数据
8> mf-backend.cpp
8> tm-context.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\winusb\messenger-winusb.cpp(125): warning C4800: “BOOL”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:\LibRealsense\librealsense-2.29.0\src\winusb\messenger-winusb.cpp(127): warning C4800: “BOOL”: 将值强制为布尔值“true”或“false”(性能警告)
8> tm-device.cpp
8> tm-info.cpp
8> algo.cpp
8> archive.cpp
8> backend.cpp
8> context.cpp
8> device.cpp
8> device_hub.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp(147): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告)
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8>E:\LibRealsense\librealsense-2.29.0\src\archive.cpp(67): warning C4267: “参数”: 从“size_t”转换到“const int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\archive.cpp(67): warning C4267: “=”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\archive.cpp(79): warning C4018: “<”: 有符号/无符号不匹配
8>E:\LibRealsense\librealsense-2.29.0\src\archive.cpp(80): warning C4018: “<”: 有符号/无符号不匹配
8>E:\LibRealsense\librealsense-2.29.0\src\archive.cpp(245): warning C4267: “return”: 从“size_t”转换到“int”，可能丢失数据
8> environment.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8>E:\Visual Studio 2015\install\VC\include\mutex(651): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\Visual Studio 2015\install\VC\include\mutex(594): note: 参见对正在编译的函数模板实例化“bool std::condition_variable::_Wait_until1<_Predicate>(std::unique_lock<std::mutex> &,const xtime *,_Predicate &)”的引用
8> with
8> [
8> _Predicate=librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp)
8> E:\LibRealsense\librealsense-2.29.0\src\tm2\tm-device.cpp(1432): note: 参见对正在编译的函数模板实例化“bool std::condition_variable::wait_for<__int64,std::ratio<1,1>,librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>>(std::unique_lock<std::mutex> &,const std::chrono::duration<__int64,std::ratio<1,1>> &,_Predicate)”的引用
8> with
8> [
8> _Predicate=librealsense::tm2_sensor::perform_async_transfer::<lambda_1fd77e6a2cf05e54c7b9c28031101925>
8> ]
8> error-handling.cpp
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> e:\librealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> global_timestamp_reader.cpp
8> hw-monitor.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\context.cpp)
8> image.cpp
8> image-avx.cpp
8> log.cpp
8> option.cpp
8> rs.cpp
8> sensor.cpp
8> software-device.cpp
8> source.cpp
8> stream.cpp
8> sync.cpp
8> types.cpp
8>E:\LibRealsense\librealsense-2.29.0\src\rs.cpp(192): warning C4297: “rs2_query_devices_ex”: 假定函数不引发异常，但确实发生了
8> E:\LibRealsense\librealsense-2.29.0\src\rs.cpp(192): note: 在函数上指定了 __declspec(nothrow)、throw()、noexcept(true)或 noexcept
8>E:\LibRealsense\librealsense-2.29.0\src\software-device.cpp(66): warning C4244: “=”: 从“uint64_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\rs.cpp(1656): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
8>E:\LibRealsense\librealsense-2.29.0\src\sensor.cpp(536): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8>E:\LibRealsense\librealsense-2.29.0\src\sensor.cpp(1019): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> e:\librealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> frame-validator.cpp
8>E:\Visual Studio 2015\install\VC\include\memory(901): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> E:\Visual Studio 2015\install\VC\include\memory(971): note: 参见对正在编译的函数模板实例化“std::_Ref_count_obj<_Ty>::_Ref_count_obj<int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用
8> with
8> [
8> _Ty=librealsense::depth_invalidation_option
8> ] (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8> e:\librealsense\librealsense-2.29.0\src\l500/l500-depth.h(105): note: 参见对正在编译的函数模板实例化“std::shared_ptr<librealsense::depth_invalidation_option> std::make_shared<librealsense::depth_invalidation_option,int,int,int,int,bool*,const char(&)[27]>(int &&,int &&,int &&,int &&,bool *&&,const char (&)[27])”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\rs.cpp)
8>e:\librealsense\librealsense-2.29.0\src\option.h(121): warning C4800: “float”: 将值强制为布尔值“true”或“false”(性能警告) (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\frame-validator.cpp)
8> e:\librealsense\librealsense-2.29.0\src\option.h(120): note: 编译类模板成员函数“void librealsense::ptr_option<bool>::set(float)”时 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\frame-validator.cpp)
8> e:\librealsense\librealsense-2.29.0\src\frame-validator.h(14): note: 参见对正在编译的类模板实例化“librealsense::ptr_option<bool>”的引用 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\frame-validator.cpp)
8> easylogging++.cc
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> verify.c
8>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
8> sqlite3.c
8> 正在创建库 E:/LibRealsense/build/Release/realsense2.lib 和对象 E:/LibRealsense/build/Release/realsense2.exp
8> realsense2.vcxproj -> E:\LibRealsense\build\Release\realsense2.dll
9>------ 已启动生成: 项目: realsense2-gl, 配置: Release x64 ------
10>------ 已启动生成: 项目: rs-record-playback, 配置: Release x64 ------
11>------ 已启动生成: 项目: rs-save-to-disk, 配置: Release x64 ------
12>------ 已启动生成: 项目: rs-software-device, 配置: Release x64 ------
13>------ 已启动生成: 项目: rs-terminal, 配置: Release x64 ------
14>------ 已启动生成: 项目: rs-tracking-and-depth, 配置: Release x64 ------
15>------ 已启动生成: 项目: rs-depth, 配置: Release x64 ------
16>------ 已启动生成: 项目: rs-trajectory, 配置: Release x64 ------
11> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/save-to-disk/CMakeLists.txt
12> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/software-device/CMakeLists.txt
13> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/terminal/CMakeLists.txt
10> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/record-playback/CMakeLists.txt
9> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/src/gl/CMakeLists.txt
11> CMake does not need to re-run because E:/LibRealsense/build/examples/save-to-disk/CMakeFiles/generate.stamp is up-to-date.
10> CMake does not need to re-run because E:/LibRealsense/build/examples/record-playback/CMakeFiles/generate.stamp is up-to-date.
12> CMake does not need to re-run because E:/LibRealsense/build/examples/software-device/CMakeFiles/generate.stamp is up-to-date.
13> CMake does not need to re-run because E:/LibRealsense/build/tools/terminal/CMakeFiles/generate.stamp is up-to-date.
9> CMake does not need to re-run because E:/LibRealsense/build/src/gl/CMakeFiles/generate.stamp is up-to-date.
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
11>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
12>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
11> rs-save-to-disk.cpp
12> rs-software-device.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> rs-record-playback.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13> rs-terminal.cpp
13>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui_draw.cpp
13> auto-complete.cpp
10>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10> imgui_impl_glfw.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> synthetic-stream-gl.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> yuy2rgb-gl.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> pointcloud-gl.cpp
10>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
12>E:\LibRealsense\librealsense-2.29.0\examples\software-device\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
15> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/depth/CMakeLists.txt
10>E:\LibRealsense\librealsense-2.29.0\examples\record-playback\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\record-playback\rs-record-playback.cpp)
9> rs-gl.cpp
12>E:\LibRealsense\librealsense-2.29.0\examples\software-device\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
10>E:\LibRealsense\librealsense-2.29.0\examples\record-playback\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\record-playback\rs-record-playback.cpp)
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
10>E:\LibRealsense\librealsense-2.29.0\examples\record-playback\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\record-playback\rs-record-playback.cpp)
9> opengl3.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> pc-shader.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> camera-shader.cpp
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> upload.cpp
10>E:\LibRealsense\librealsense-2.29.0\examples\record-playback\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\record-playback\rs-record-playback.cpp)
12>E:\LibRealsense\librealsense-2.29.0\examples\software-device\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
12>E:\LibRealsense\librealsense-2.29.0\examples\software-device\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
13>E:\LibRealsense\librealsense-2.29.0\tools\terminal\rs-terminal.cpp(192): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
14> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/tracking-and-depth/CMakeLists.txt
13>E:\LibRealsense\librealsense-2.29.0\tools\terminal\rs-terminal.cpp(193): warning C4267: “参数”: 从“size_t”转换到“uint32_t”，可能丢失数据
15> CMake does not need to re-run because E:/LibRealsense/build/examples/C/depth/CMakeFiles/generate.stamp is up-to-date.
14> CMake does not need to re-run because E:/LibRealsense/build/examples/tracking-and-depth/CMakeFiles/generate.stamp is up-to-date.
9>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
15>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
15> rs-depth.c
15>E:\LibRealsense\librealsense-2.29.0\examples\C\depth\rs-depth.c(239): warning C4090: “函数”: 不同的“const”限定符
11> rs-save-to-disk.vcxproj -> E:\LibRealsense\build\Release\rs-save-to-disk.exe
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\synthetic-stream-gl.cpp)
14>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
15> rs-depth.vcxproj -> E:\LibRealsense\build\Release\rs-depth.exe
17>------ 已启动生成: 项目: rs-sensor-control, 配置: Release x64 ------
18>------ 已启动生成: 项目: rs-align, 配置: Release x64 ------
14> rs-tracking-and-depth.cpp
9> colorizer-gl.cpp
16> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/trajectory/CMakeLists.txt
14>E:\LibRealsense\librealsense-2.29.0\examples\tracking-and-depth\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\camera-shader.cpp)
16> CMake does not need to re-run because E:/LibRealsense/build/examples/trajectory/CMakeFiles/generate.stamp is up-to-date.
14>E:\LibRealsense\librealsense-2.29.0\examples\tracking-and-depth\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\synthetic-stream-gl.cpp(11): warning C4005: “NOMINMAX”: 宏重定义
16>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
14>E:\LibRealsense\librealsense-2.29.0\examples\tracking-and-depth\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9> E:\LibRealsense\librealsense-2.29.0\src\gl\synthetic-stream-gl.cpp(11): note: 命令行参数: 参见前面的“NOMINMAX”定义
16> rs-trajectory.cpp
14>E:\LibRealsense\librealsense-2.29.0\examples\tracking-and-depth\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\pointcloud-gl.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\pc-shader.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\yuy2rgb-gl.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\upload.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\rs-gl.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\gl\yuy2rgb-gl.cpp(12): warning C4005: “NOMINMAX”: 宏重定义
9> E:\LibRealsense\librealsense-2.29.0\src\gl\yuy2rgb-gl.cpp(12): note: 命令行参数: 参见前面的“NOMINMAX”定义
9>E:\LibRealsense\librealsense-2.29.0\src\gl\upload.cpp(15): warning C4005: “NOMINMAX”: 宏重定义
9> E:\LibRealsense\librealsense-2.29.0\src\gl\upload.cpp(15): note: 命令行参数: 参见前面的“NOMINMAX”定义
17> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/sensor-control/CMakeLists.txt
12> rs-software-device.vcxproj -> E:\LibRealsense\build\Release\rs-software-device.exe
19>------ 已启动生成: 项目: rs-align-advanced, 配置: Release x64 ------
17> CMake does not need to re-run because E:/LibRealsense/build/examples/sensor-control/CMakeFiles/generate.stamp is up-to-date.
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/align/CMakeLists.txt
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18> CMake does not need to re-run because E:/LibRealsense/build/examples/align/CMakeFiles/generate.stamp is up-to-date.
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(137): warning C4305: “参数”: 从“double”到“GLfloat”截断
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(216): warning C4305: “初始化”: 从“double”到“float”截断
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(237): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(269): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(269): warning C4244: “参数”: 从“float”转换到“GLint”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(271): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(271): warning C4244: “参数”: 从“float”转换到“GLint”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(292): warning C4244: “参数”: 从“float”转换到“GLsizei”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(338): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(338): warning C4305: “参数”: 从“double”到“GLfloat”截断
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(415): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(416): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(417): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(418): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(422): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(423): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(425): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(426): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(428): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
16>E:\LibRealsense\librealsense-2.29.0\examples\trajectory\rs-trajectory.cpp(429): warning C4244: “参数”: 从“double”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp)
19> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/align-advanced/CMakeLists.txt
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
13> rs-terminal.vcxproj -> E:\LibRealsense\build\Release\rs-terminal.exe
19> CMake does not need to re-run because E:/LibRealsense/build/examples/align-advanced/CMakeFiles/generate.stamp is up-to-date.
17>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(14): warning C4005: “NOMINMAX”: 宏重定义
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
18> rs-align.cpp
17> rs-sensor-control.cpp
9> E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(14): note: 命令行参数: 参见前面的“NOMINMAX”定义
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(153): warning C4267: “参数”: 从“size_t”转换到“GLsizei”，可能丢失数据
18> imgui.cpp
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(184): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(223): warning C4267: “参数”: 从“size_t”转换到“GLsizei”，可能丢失数据
18> imgui_draw.cpp
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(314): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
18>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(317): warning C4244: “参数”: 从“const int”转换到“float”，可能丢失数据
18> imgui_impl_glfw.cpp
18>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
20>------ 已启动生成: 项目: rs-ar-basic, 配置: Release x64 ------
17>e:\librealsense\librealsense-2.29.0\examples\sensor-control\../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18>e:\librealsense\librealsense-2.29.0\examples\align\../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align\rs-align.cpp)
9>E:\LibRealsense\librealsense-2.29.0\src\proc/colorizer.h(110): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp)
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
17>e:\librealsense\librealsense-2.29.0\examples\sensor-control\../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18>e:\librealsense\librealsense-2.29.0\examples\align\../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align\rs-align.cpp)
9> E:\LibRealsense\librealsense-2.29.0\src\gl\colorizer-gl.cpp(273): note: 参见对正在编译的函数模板实例化“void librealsense::colorizer::update_histogram<float>(int *,const T *,int,int)”的引用
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
17>e:\librealsense\librealsense-2.29.0\examples\sensor-control\../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18>e:\librealsense\librealsense-2.29.0\examples\align\../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align\rs-align.cpp)
9> with
19> rs-align-advanced.cpp
17>e:\librealsense\librealsense-2.29.0\examples\sensor-control\../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
18>e:\librealsense\librealsense-2.29.0\examples\align\../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align\rs-align.cpp)
9> [
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
17>e:\librealsense\librealsense-2.29.0\include\librealsense2\hpp\rs_frame.hpp(95): warning C4800: “const rs2_stream_profile *”: 将值强制为布尔值“true”或“false”(性能警告)
9> T=float
19> imgui.cpp
17> e:\librealsense\librealsense-2.29.0\examples\sensor-control\api_how_to.h(419): note: 参见对正在编译的函数模板实例化“bool rs2::stream_profile::is<rs2::video_stream_profile>(void) const”的引用
9> ]
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19> imgui_draw.cpp
19>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
19> imgui_impl_glfw.cpp
19>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
19>e:\librealsense\librealsense-2.29.0\examples\align-advanced\../example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align-advanced\rs-align-advanced.cpp)
19>e:\librealsense\librealsense-2.29.0\examples\align-advanced\../example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align-advanced\rs-align-advanced.cpp)
19>e:\librealsense\librealsense-2.29.0\examples\align-advanced\../example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align-advanced\rs-align-advanced.cpp)
19>e:\librealsense\librealsense-2.29.0\examples\align-advanced\../example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\align-advanced\rs-align-advanced.cpp)
9> align-gl.cpp
9> easylogging++.cc
10> rs-record-playback.vcxproj -> E:\LibRealsense\build\Release\rs-record-playback.exe
20> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/ar-basic/CMakeLists.txt
20> CMake does not need to re-run because E:/LibRealsense/build/examples/ar-basic/CMakeFiles/generate.stamp is up-to-date.
21>------ 已启动生成: 项目: rs-callback, 配置: Release x64 ------
16>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
16> lz4.c
14> rs-tracking-and-depth.vcxproj -> E:\LibRealsense\build\Release\rs-tracking-and-depth.exe
18> rs-align.vcxproj -> E:\LibRealsense\build\Release\rs-align.exe
22>------ 已启动生成: 项目: rs-capture, 配置: Release x64 ------
20>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
21> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/callback/CMakeLists.txt
20> rs-ar-basic.cpp
9>E:\LibRealsense\librealsense-2.29.0\src\gl\..\..\common\tiny-profiler.h(70): warning C4244: “参数”: 从“double”转换到“long”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp)
21> CMake does not need to re-run because E:/LibRealsense/build/examples/callback/CMakeFiles/generate.stamp is up-to-date.
21>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
21> rs-callback.cpp
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(12): warning C4005: “NOMINMAX”: 宏重定义
9> E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(12): note: 命令行参数: 参见前面的“NOMINMAX”定义
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(110): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(111): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(112): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(113): warning C4244: “=”: 从“double”转换到“int”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(120): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(121): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(122): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(130): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(131): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
9>E:\LibRealsense\librealsense-2.29.0\src\gl\align-gl.cpp(132): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
23>------ 已启动生成: 项目: rs-color, 配置: Release x64 ------
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\rs-ar-basic.cpp(86): warning C4305: “初始化”: 从“double”到“float”截断
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\rs-ar-basic.cpp(144): warning C4305: “参数”: 从“double”到“float”截断
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\rs-ar-basic.cpp(158): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\rs-ar-basic.cpp(162): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
20>E:\LibRealsense\librealsense-2.29.0\examples\ar-basic\rs-ar-basic.cpp(294): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据
19> rs-align-advanced.vcxproj -> E:\LibRealsense\build\Release\rs-align-advanced.exe
24>------ 已启动生成: 项目: rs-convert, 配置: Release x64 ------
23> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/color/CMakeLists.txt
17> rs-sensor-control.vcxproj -> E:\LibRealsense\build\Release\rs-sensor-control.exe
23> CMake does not need to re-run because E:/LibRealsense/build/examples/C/color/CMakeFiles/generate.stamp is up-to-date.
16> rs-trajectory.vcxproj -> E:\LibRealsense\build\Release\rs-trajectory.exe
25>------ 已启动生成: 项目: rs-pose-and-image, 配置: Release x64 ------
26>------ 已启动生成: 项目: rs-distance, 配置: Release x64 ------
23>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
21> rs-callback.vcxproj -> E:\LibRealsense\build\Release\rs-callback.exe
23> rs-color.c
27>------ 已启动生成: 项目: rs-enumerate-devices, 配置: Release x64 ------
24> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/convert/CMakeLists.txt
26> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/C/distance/CMakeLists.txt
24> CMake does not need to re-run because E:/LibRealsense/build/tools/convert/CMakeFiles/generate.stamp is up-to-date.
20> rs-ar-basic.vcxproj -> E:\LibRealsense\build\Release\rs-ar-basic.exe
28>------ 已启动生成: 项目: rs-fw-logger, 配置: Release x64 ------
26> CMake does not need to re-run because E:/LibRealsense/build/examples/C/distance/CMakeFiles/generate.stamp is up-to-date.
24>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
24> rs-convert.cpp
25> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose-and-image/CMakeLists.txt
26>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
26> rs-distance.c
25> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-and-image/CMakeFiles/generate.stamp is up-to-date.
23> rs-color.vcxproj -> E:\LibRealsense\build\Release\rs-color.exe
29>------ 已启动生成: 项目: rs-fw-update, 配置: Release x64 ------
25>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/fw-logger/CMakeLists.txt
30>------ 已启动生成: 项目: rs-hello-realsense, 配置: Release x64 ------
28> CMake does not need to re-run because E:/LibRealsense/build/tools/fw-logger/CMakeFiles/generate.stamp is up-to-date.
25> rs-pose-and-image.cpp
24>e:\librealsense\librealsense-2.29.0\tools\convert\converters/converter-bin.hpp(47): warning C4244: “=”: 从“double”转换到“float”，可能丢失数据
24>e:\librealsense\librealsense-2.29.0\tools\convert\converters/converter-bin.hpp(48): warning C4244: “初始化”: 从“float”转换到“uint32_t”，可能丢失数据
26> rs-distance.vcxproj -> E:\LibRealsense\build\Release\rs-distance.exe
31>------ 已启动生成: 项目: rs-measure, 配置: Release x64 ------
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> rs-fw-logger.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-log-data.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-formating-options.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-parser.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> fw-logs-xml-helper.cpp
28>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
28> string-formatter.cpp
30> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/hello-realsense/CMakeLists.txt
30> CMake does not need to re-run because E:/LibRealsense/build/examples/hello-realsense/CMakeFiles/generate.stamp is up-to-date.
30>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
30> rs-hello-realsense.cpp
30>E:\LibRealsense\librealsense-2.29.0\examples\hello-realsense\rs-hello-realsense.cpp(26): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
30>E:\LibRealsense\librealsense-2.29.0\examples\hello-realsense\rs-hello-realsense.cpp(27): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
30>E:\LibRealsense\librealsense-2.29.0\examples\hello-realsense\rs-hello-realsense.cpp(30): warning C4244: “参数”: 从“float”转换到“int”，可能丢失数据
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> glad.c
9>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
9> lz4.c
24> rs-convert.vcxproj -> E:\LibRealsense\build\Release\rs-convert.exe
25> rs-pose-and-image.vcxproj -> E:\LibRealsense\build\Release\rs-pose-and-image.exe
32>------ 已启动生成: 项目: rs-motion, 配置: Release x64 ------
33>------ 已启动生成: 项目: rs-multicam, 配置: Release x64 ------
28> rs-fw-logger.vcxproj -> E:\LibRealsense\build\Release\rs-fw-logger.exe
34>------ 已启动生成: 项目: rs-pointcloud, 配置: Release x64 ------
35>------ 已启动生成: 项目: rs-pose, 配置: Release x64 ------
32> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/motion/CMakeLists.txt
33> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/multicam/CMakeLists.txt
32> CMake does not need to re-run because E:/LibRealsense/build/examples/motion/CMakeFiles/generate.stamp is up-to-date.
33> CMake does not need to re-run because E:/LibRealsense/build/examples/multicam/CMakeFiles/generate.stamp is up-to-date.
32>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
32> rs-motion.cpp
34> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pointcloud/CMakeLists.txt
35> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose/CMakeLists.txt
33>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
34> CMake does not need to re-run because E:/LibRealsense/build/examples/pointcloud/CMakeFiles/generate.stamp is up-to-date.
33> rs-multicam.cpp
35> CMake does not need to re-run because E:/LibRealsense/build/examples/pose/CMakeFiles/generate.stamp is up-to-date.
34>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
34> rs-pointcloud.cpp
9> 正在创建库 E:/LibRealsense/build/src/gl/Release/realsense2-gl.lib 和对象 E:/LibRealsense/build/src/gl/Release/realsense2-gl.exp
35>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
35> rs-pose.cpp
30> rs-hello-realsense.vcxproj -> E:\LibRealsense\build\Release\rs-hello-realsense.exe
36>------ 已启动生成: 项目: rs-pose-predict, 配置: Release x64 ------
37>------ 已启动生成: 项目: rs-post-processing, 配置: Release x64 ------
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
36> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/pose-predict/CMakeLists.txt
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
9> realsense2-gl.vcxproj -> E:\LibRealsense\build\Release\realsense2-gl.dll
38>------ 已启动生成: 项目: rs-rosbag-inspector, 配置: Release x64 ------
36> CMake does not need to re-run because E:/LibRealsense/build/examples/pose-predict/CMakeFiles/generate.stamp is up-to-date.
33>E:\LibRealsense\librealsense-2.29.0\examples\multicam\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
34>E:\LibRealsense\librealsense-2.29.0\examples\pointcloud\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(84): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
37> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/post-processing/CMakeLists.txt
33>E:\LibRealsense\librealsense-2.29.0\examples\multicam\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(85): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
36>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> CMake does not need to re-run because E:/LibRealsense/build/examples/post-processing/CMakeFiles/generate.stamp is up-to-date.
34>E:\LibRealsense\librealsense-2.29.0\examples\pointcloud\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
33>E:\LibRealsense\librealsense-2.29.0\examples\multicam\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(86): warning C4244: “参数”: 从“double”转换到“GLfloat”，可能丢失数据
36> rs-pose-predict.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
34>E:\LibRealsense\librealsense-2.29.0\examples\pointcloud\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
33>E:\LibRealsense\librealsense-2.29.0\examples\multicam\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(91): warning C4305: “参数”: 从“double”到“GLfloat”截断
34>E:\LibRealsense\librealsense-2.29.0\examples\pointcloud\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(119): warning C4305: “初始化”: 从“double”到“float”截断
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(145): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
32>E:\LibRealsense\librealsense-2.29.0\examples\motion\rs-motion.cpp(168): warning C4305: “=”: 从“const double”到“float”截断
37> rs-post-processing.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> imgui.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> imgui_draw.cpp
37>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
37> imgui_impl_glfw.cpp
37>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
36>E:\LibRealsense\librealsense-2.29.0\examples\pose-predict\rs-pose-predict.cpp(66): warning C4244: “初始化”: 从“__int64”转换到“double”，可能丢失数据
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp)
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp)
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp)
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp)
38> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/rosbag-inspector/CMakeLists.txt
38> CMake does not need to re-run because E:/LibRealsense/build/tools/rosbag-inspector/CMakeFiles/generate.stamp is up-to-date.
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp(187): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
37>E:\LibRealsense\librealsense-2.29.0\examples\post-processing\rs-post-processing.cpp(192): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
32>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
35> rs-pose.vcxproj -> E:\LibRealsense\build\Release\rs-pose.exe
32> lz4.c
39>------ 已启动生成: 项目: realsense-viewer, 配置: Release x64 ------
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> rs-rosbag-inspector.cpp
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> os.cpp
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> imgui.cpp
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> imgui_draw.cpp
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
38> imgui_impl_glfw.cpp
38>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
34> rs-pointcloud.vcxproj -> E:\LibRealsense\build\Release\rs-pointcloud.exe
38>e:\librealsense\librealsense-2.29.0\third-party\realsense-file\rosbag\rostime\include\ros\../../../cpp_common/include/ros/platform.h(39): warning C4005: “WIN32_LEAN_AND_MEAN”: 宏重定义 (编译源文件 E:\LibRealsense\librealsense-2.29.0\tools\rosbag-inspector\rs-rosbag-inspector.cpp)
38> E:\LibRealsense\librealsense-2.29.0\tools\rosbag-inspector\..\..\third-party\glad\glad/glad.h(37): note: 参见“WIN32_LEAN_AND_MEAN”的前一个定义 (编译源文件 E:\LibRealsense\librealsense-2.29.0\tools\rosbag-inspector\rs-rosbag-inspector.cpp)
32> rs-motion.vcxproj -> E:\LibRealsense\build\Release\rs-motion.exe
40>------ 已启动生成: 项目: rs-benchmark, 配置: Release x64 ------
41>------ 已启动生成: 项目: rs-data-collect, 配置: Release x64 ------
42>------ 已启动生成: 项目: rs-depth-quality, 配置: Release x64 ------
33> rs-multicam.vcxproj -> E:\LibRealsense\build\Release\rs-multicam.exe
38>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
38>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
43>------ 已启动生成: 项目: rs-gl, 配置: Release x64 ------
41> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/data-collect/CMakeLists.txt
40> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/benchmark/CMakeLists.txt
41> CMake does not need to re-run because E:/LibRealsense/build/tools/data-collect/CMakeFiles/generate.stamp is up-to-date.
40> CMake does not need to re-run because E:/LibRealsense/build/tools/benchmark/CMakeFiles/generate.stamp is up-to-date.
41>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
41> rs-data-collect.cpp
43> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/examples/gl/CMakeLists.txt
36> rs-pose-predict.vcxproj -> E:\LibRealsense\build\Release\rs-pose-predict.exe
43> CMake does not need to re-run because E:/LibRealsense/build/examples/gl/CMakeFiles/generate.stamp is up-to-date.
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
44>------ 已启动生成: 项目: rs-record, 配置: Release x64 ------
40> rs-benchmark.cpp
39> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/realsense-viewer/CMakeLists.txt
39> CMake does not need to re-run because E:/LibRealsense/build/tools/realsense-viewer/CMakeFiles/generate.stamp is up-to-date.
43>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43> rs-gl.cpp
42> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/depth-quality/CMakeLists.txt
42> CMake does not need to re-run because E:/LibRealsense/build/tools/depth-quality/CMakeFiles/generate.stamp is up-to-date.
44> Building Custom Rule E:/LibRealsense/librealsense-2.29.0/tools/recorder/CMakeLists.txt
44> CMake does not need to re-run because E:/LibRealsense/build/tools/recorder/CMakeFiles/generate.stamp is up-to-date.
37> rs-post-processing.vcxproj -> E:\LibRealsense\build\Release\rs-post-processing.exe
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>E:\LibRealsense\librealsense-2.29.0\examples\gl\..\example.hpp(115): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>E:\LibRealsense\librealsense-2.29.0\examples\gl\..\example.hpp(335): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
42> model-views.cpp
39> model-views.cpp
43>E:\LibRealsense\librealsense-2.29.0\examples\gl\..\example.hpp(464): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
43>E:\LibRealsense\librealsense-2.29.0\examples\gl\..\example.hpp(468): warning C4244: “初始化”: 从“const std::size_t”转换到“float”，可能丢失数据
42> notifications.cpp
39> notifications.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> viewer.cpp
39> viewer.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> ux-window.cpp
42> ux-window.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> ux-alignment.cpp
42> ux-alignment.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> opengl3.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> rs-config.cpp
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> os.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> opengl3.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> rs-config.cpp
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> os.cpp
44>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
44> rs-record.cpp
42> fw-update-helper.cpp
42>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
39>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(111): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
39>E:\LibRealsense\librealsense-2.29.0\common\opengl3.cpp(413): warning C4267: “初始化”: 从“size_t”转换到“int”，可能丢失数据
39> fw-update-helper.cpp
42> on-chip-calib.cpp
43> rs-gl.vcxproj -> E:\LibRealsense\build\Release\rs-gl.exe
39>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4311: “reinterpret_cast”: 从“HINSTANCE”到“int”的指针截断
40>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
40> glad.c
39>E:\LibRealsense\librealsense-2.29.0\common\os.cpp(61): warning C4302: “reinterpret_cast”: 从“HINSTANCE”到“int”截断
42>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp)
39> on-chip-calib.cpp
42>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\rs-config.cpp)
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\ux-window.cpp)
42>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp)
42>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp)
42> rs-depth-quality.cpp
42>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\ux-window.cpp)
42>E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp(1532): warning C4244: “*=”: 从“float”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp(1546): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(121): warning C4244: “=”: 从“const int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(139): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(168): warning C4305: “参数”: 从“double”到“float”截断
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(169): warning C4305: “参数”: 从“double”到“float”截断
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp)
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp)
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(196): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39> realsense-viewer.cpp
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(230): warning C4244: “return”: 从“float”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp(1532): warning C4244: “*=”: 从“float”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(277): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\viewer.cpp(1546): warning C4244: “初始化”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(278): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(289): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\rs-config.cpp)
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(290): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp)
42>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(294): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp(3475): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp(3575): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\tools\realsense-viewer\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(121): warning C4244: “=”: 从“const int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(139): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(168): warning C4305: “参数”: 从“double”到“float”截断
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(169): warning C4305: “参数”: 从“double”到“float”截断
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(196): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(230): warning C4244: “return”: 从“float”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(277): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(278): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(289): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
44> rs-record.vcxproj -> E:\LibRealsense\build\Release\rs-record.exe
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(290): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp)
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
41> rs-data-collect.vcxproj -> E:\LibRealsense\build\Release\rs-data-collect.exe
39>E:\LibRealsense\librealsense-2.29.0\common\notifications.cpp(294): warning C4244: “=”: 从“int”转换到“float”，可能丢失数据
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(197): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(197): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
38> glad.c
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(222): warning C4018: “<”: 有符号/无符号不匹配
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(222): warning C4018: “<”: 有符号/无符号不匹配
38>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(263): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(263): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
38> tinyfiledialogs.c
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(275): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(275): warning C4244: “=”: 从“float”转换到“int”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(283): warning C4018: “<”: 有符号/无符号不匹配
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(283): warning C4018: “<”: 有符号/无符号不匹配
42>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(337): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(337): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(723): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp(3475): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(752): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\model-views.cpp(3575): warning C4244: “初始化”: 从“double”转换到“uint64_t”，可能丢失数据
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(765): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39>e:\librealsense\librealsense-2.29.0\include\librealsense2\hpp\rs_device.hpp(280): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(782): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39> E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(264): note: 参见对正在编译的函数模板实例化“void rs2::update_device::update<rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T) const”的引用
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(783): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
39> with
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(800): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39> [
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(847): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39> _Ty=uint8_t,
42>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(848): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
39> T=rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>
42>E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\rs-depth-quality.cpp)
39> ]
42>e:\librealsense\librealsense-2.29.0\include\librealsense2\hpp\rs_device.hpp(280): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
39>e:\librealsense\librealsense-2.29.0\include\librealsense2\hpp\rs_device.hpp(245): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
42> E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(264): note: 参见对正在编译的函数模板实例化“void rs2::update_device::update<rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T) const”的引用
39> E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(276): note: 参见对正在编译的函数模板实例化“void rs2::updatable::update_unsigned<rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T,int) const”的引用
42> with
39> with
42> [
42> _Ty=uint8_t,
39> [
42> T=rs2::firmware_update_manager::process_flow::<lambda_9dfb0dfc4ac9b320a8ddf011d9dc6b5d>
39> _Ty=uint8_t,
42> ]
39> T=rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>
42>e:\librealsense\librealsense-2.29.0\include\librealsense2\hpp\rs_device.hpp(245): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp)
39> ]
39>E:\LibRealsense\librealsense-2.29.0\tools\realsense-viewer\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp)
42> E:\LibRealsense\librealsense-2.29.0\common\fw-update-helper.cpp(276): note: 参见对正在编译的函数模板实例化“void rs2::updatable::update_unsigned<rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>>(const std::vector<uint8_t,std::allocator<_Ty>> &,T,int) const”的引用
39>e:\librealsense\librealsense-2.29.0\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\tools\realsense-viewer\realsense-viewer.cpp)
42> with
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(723): warning C4244: “参数”: 从“double”转换到“float”，可能丢失数据
42> [
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(752): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
42> _Ty=uint8_t,
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(765): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
42> T=rs2::firmware_update_manager::process_flow::<lambda_b96b14904831543682657ff6bab7b7aa>
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(782): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(783): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(800): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
42> ]
40> rs-benchmark.vcxproj -> E:\LibRealsense\build\Release\rs-benchmark.exe
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(847): warning C4244: “参数”: 从“int”转换到“float”，可能丢失数据
39>E:\LibRealsense\librealsense-2.29.0\common\on-chip-calib.cpp(848): warning C4267: “参数”: 从“size_t”转换到“int”，可能丢失数据
39> imgui.cpp
39>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
42> depth-quality-model.cpp
42> imgui.cpp
39> imgui_draw.cpp
38> rs-rosbag-inspector.vcxproj -> E:\LibRealsense\build\Release\rs-rosbag-inspector.exe
42> imgui_draw.cpp
42>E:\LibRealsense\librealsense-2.29.0\third-party\imgui\imgui.cpp(5547): warning C4800: “int”: 将值强制为布尔值“true”或“false”(性能警告)
39> imgui_impl_glfw.cpp
42> imgui_impl_glfw.cpp
39> windows-app-bootstrap.cpp
42> windows-app-bootstrap.cpp
42>E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\..\..\common\model-views.h(59): warning C4305: “参数”: 从“int”到“bool”截断 (编译源文件 E:\LibRealsense\librealsense-2.29.0\tools\depth-quality\depth-quality-model.cpp)
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> glad.c
42>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
42> tinyfiledialogs.c
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> glad.c
39>cl : 命令行 warning D9002: 忽略未知选项“/SAFESEH:NO”
39> tinyfiledialogs.c
42> 正在创建库 E:/LibRealsense/build/tools/depth-quality/Release/rs-depth-quality.lib 和对象 E:/LibRealsense/build/tools/depth-quality/Release/rs-depth-quality.exp
39> 正在创建库 E:/LibRealsense/build/tools/realsense-viewer/Release/realsense-viewer.lib 和对象 E:/LibRealsense/build/tools/realsense-viewer/Release/realsense-viewer.exp
42> rs-depth-quality.vcxproj -> E:\LibRealsense\build\Release\rs-depth-quality.exe
39> realsense-viewer.vcxproj -> E:\LibRealsense\build\Release\realsense-viewer.exe
45>------ 已启动生成: 项目: ALL_BUILD, 配置: Release x64 ------
========== 生成: 成功 45 个，失败 0 个，最新 0 个，跳过 0 个 ==========

=======================================================================

1>------ 已启动生成: 项目: libusb (ExternalProjectTargets\libusb\libusb), 配置: Release x64 ------
1> Performing update step for 'libusb'
2>------ 已启动生成: 项目: INSTALL, 配置: Release x64 ------
2> -- Install configuration: "Release"
2> -- Installing: E:/LibRealsense/install/lib/realsense2.lib
2> -- Installing: E:/LibRealsense/install/bin/realsense2.dll
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_advanced_mode_command.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_config.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_context.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_device.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_frame.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_internal.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_option.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_pipeline.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_processing.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_record_playback.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_sensor.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/h/rs_types.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_context.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_device.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_export.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_frame.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_internal.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_options.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_pipeline.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_processing.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_record_playback.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_sensor.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/hpp/rs_types.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/rs.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/rs.hpp
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/rsutil.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/rs_advanced_mode.h
2> -- Up-to-date: E:/LibRealsense/install/include/librealsense2/rs_advanced_mode.hpp
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Targets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Targets-release.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2Config.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2ConfigVersion.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/pkgconfig/realsense2.pc
2> -- Installing: E:/LibRealsense/install/lib/realsense-file.lib
2> -- Up-to-date: E:/LibRealsense/install/include/GLFW
2> -- Up-to-date: E:/LibRealsense/install/include/GLFW/glfw3.h
2> -- Up-to-date: E:/LibRealsense/install/include/GLFW/glfw3native.h
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Config.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/glfw3/glfw3ConfigVersion.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Targets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/glfw3/glfw3Targets-release.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/pkgconfig/glfw3.pc
2> -- Installing: E:/LibRealsense/install/lib/glfw3.lib
2> -- Installing: E:/LibRealsense/install/lib/realsense2-gl.lib
2> -- Installing: E:/LibRealsense/install/bin/realsense2-gl.dll
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glTargets.cmake
2> -- Installing: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glTargets-release.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glConfig.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/cmake/realsense2/realsense2-glConfigVersion.cmake
2> -- Up-to-date: E:/LibRealsense/install/lib/pkgconfig/realsense2-gl.pc
2> -- Installing: E:/LibRealsense/install/bin/rs-hello-realsense.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-software-device.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-capture.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-callback.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-save-to-disk.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-multicam.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pointcloud.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-align.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-align-advanced.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-sensor-control.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-measure.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-depth.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-color.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-distance.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-post-processing.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-record-playback.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-motion.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-gl.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose-predict.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-pose-and-image.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-trajectory.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-ar-basic.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-tracking-and-depth.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-convert.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-enumerate-devices.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-fw-logger.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-terminal.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-record.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-fw-update.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-data-collect.exe
2> -- Installing: E:/LibRealsense/install/bin/realsense-viewer.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-depth-quality.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-rosbag-inspector.exe
2> -- Installing: E:/LibRealsense/install/bin/rs-benchmark.exe
2> -- Installing: E:/LibRealsense/install/lib/fw.lib
2> -- Installing: E:/LibRealsense/install/lib/tm.lib
2> -- Installing: E:/LibRealsense/install/lib/uvc_fw.lib
========== 生成: 成功 2 个，失败 0 个，最新 44 个，跳过 0 个 ==========

realsense SDK编译 release的更多相关文章

realsense SDK编译 debug
1>------ 已启动全部重新生成: 项目: ZERO_CHECK, 配置: Debug x64 ------1> Checking Build System1> CMake do ...
Intel® RealSense™ SDK Architecture
In this article, we highlight some of the key changes that you can expect to see in the Intel RealSe ...
第三章用SDK编译出第一个在Linux下的软件界面
第三章用SDK编译出第一个在Linux下的软件界面先创建一个工程目录“mkdir project1”,进入目录,创建main.cpp文件,编写代码如下: 代码内容暂时可以先不理解,先让程序跑起来再 ...
编译Release版本小技巧
原文:编译Release版本小技巧由于项目中要部署的App有很多,每次发布一个版本后都有一堆垃圾文件,部署在众多的终端机上不注意的话十分容易搞错.记得以前在VS中是可以设置下不生成vhost和pdb ...
VS编译release版本的出现的LNK1104 无法打开文件“libboost_filesystem-vc140-mt-1_58.lib
最近在用restbed和vs2015做一个项目,debug编译的没问题,但是编译release就有问题,困扰了一天,说下我的出坑过程. 1.我用到了外部的库 restbed ,首先要想正确编译过,你的 ...
openwrt sdk 编译工具及 hello world
需要先在 make menuconfig 中打开 sdk make -j4在 bin\targets\ramips\mt7620生成一个openwrt-sdk-ramips-mt7620_gcc-7. ...
RK3568开发笔记（五）：在虚拟机上使用SDK编译制作uboot、kernel和ubuntu镜像
前言 buildroot虽然灵活,但是基于实际情况,本身是侧重驱动和应用定制开发的只定制一次文件系统投入有点多,还不如直接ubunt自己交叉编译依赖库,做一些库的移植裁剪. 于是本篇就使用ubu ...
NDK下将Platinum SDK 编译成so库（android - upnp）
Platinum UPnP SDK 是一个跨平台的C++库,利用该库,可以很容易就构建出DLNA/UPnP控制点(DLNA/UPnP Control Point)和DLNA/UPnP设备(DLNA/U ...
使用Gradle编译release apk报错：Please correct the above warnings first
在开发SDK的过程中,遇到了一个研发,使用了自己的SDK之后遇到了各种问题,于是我们自己帮忙接入. 所有代码都接入完成之后,准备export出一个release包,但是此时却报错: 此时出现了很多的w ...

随机推荐

windows 10 下部署WCF 一些细节
总体上在IIS中部署一个WCF服务和Win7没有什么区别但是,如果你使用的是.NET 4.5开发的 WCF服务,而windows10 又安装了.net 4.7 那么你需要注意下面问题
js弹窗输入
<html> <head> <title>js输入对话框</title> </head> <body> <script l ...
java相关资料连接
1.tomcat原理https://www.ibm.com/developerworks/cn/java/j-lo-tomcat1/index.html ....
c++的动态绑定和静态绑定及多态的实现原理(摘)
C++多态的实现原理为了支持c++的多态性,才用了动态绑定和静态绑定.理解它们的区别有助于更好的理解多态性,以及在编程的过程中避免犯错误. 需要理解四个名词:对象的静态类型:对象在声明时采用的类型. ...
c#基础用法
1.注释符 1)注销 2)解释 2.3种方式 1)单行注释 // 2)多行注释 /*要注释的内容*/ 3)文档注释 /// 多用来解释类或方法 3.数据类型 1)值类型 2)引用类型 1.对象 obj ...
vue中input输入第一个字符时，光标会消失，需要再次点击才能输入
vue中input输入第一个字符时,光标会消失,需要再次点击才能输入在这里我犯了一个小错误,v-if语法比较倾向于一次性操作,当input获取焦点时,v-if判断为true,立即刷新数据,进行渲染, ...
MySQL中怎么将LIMIT分页优化？
1.语法: *** limit [offset,] rows 一般是用于select语句中用以从结果集中拿出特定的一部分数据. offset是偏移量,表示我们现在 ...
Mac 下Wireshark 找不到网卡
终端上面,执行如下命令: sudo chgrp admin /dev/bpf* sudo chmod g+rw /dev/bpf*
linux ftp启用和停用及vsftpd安装 ssh 启用和停用命令及ssh的安装
1.首页要用ftp:服务器上必须安装vsftpd 安装命令 yum installed vsftpd 查看vsftpd是否启动 root@DK:/home/daokr# service vsftpd ...
Ural1297 最长回文子串(后缀数组+RMQ)
/* 源程序丢失QWQ. 就不粘代码了. 大体做法是把串反转然后连接. 做一遍后缀数组. 对height做一遍rmq. 然后对于每个位置的奇偶分别判断, 记下pos. 注意求的是[l+1,r]的hei ...

realsense SDK编译 release

realsense SDK编译 release的更多相关文章

随机推荐

热门专题