k8s安装之calico.yaml
这个calico有点长,我也没有仔细看完。
但部署上去是可用的。
如果节点超过200台,那最好要另外一套配置。。。
而对于我们,差不多下面的配置够用了。
veth_mtu: "1440" # The CNI network configuration to install on each node. The special # values in this config will be automatically populated. cni_network_config: |- { "name": "k8s-pod-network", "cniVersion": "0.3.0", "plugins": [ { "type": "calico", "log_level": "info", "datastore_type": "kubernetes", "nodename": "__KUBERNETES_NODE_NAME__", "mtu": __CNI_MTU__, "ipam": { "type": "calico-ipam" }, "policy": { "type": "k8s" }, "kubernetes": { "kubeconfig": "__KUBECONFIG_FILEPATH__" } }, { "type": "portmap", "snat": true, "capabilities": {"portMappings": true} } ] } --- # Source: calico/templates/kdd-crds.yaml # Create all the CustomResourceDefinitions needed for # Calico policy and networking mode. apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: felixconfigurations.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: FelixConfiguration plural: felixconfigurations singular: felixconfiguration --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: ipamblocks.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: IPAMBlock plural: ipamblocks singular: ipamblock --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: blockaffinities.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: BlockAffinity plural: blockaffinities singular: blockaffinity --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: ipamhandles.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: IPAMHandle plural: ipamhandles singular: ipamhandle --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: ipamconfigs.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: IPAMConfig plural: ipamconfigs singular: ipamconfig --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: bgppeers.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: BGPPeer plural: bgppeers singular: bgppeer --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: bgpconfigurations.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: BGPConfiguration plural: bgpconfigurations singular: bgpconfiguration --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: ippools.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: IPPool plural: ippools singular: ippool --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: hostendpoints.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: HostEndpoint plural: hostendpoints singular: hostendpoint --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: clusterinformations.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: ClusterInformation plural: clusterinformations singular: clusterinformation --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: globalnetworkpolicies.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: GlobalNetworkPolicy plural: globalnetworkpolicies singular: globalnetworkpolicy --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: globalnetworksets.crd.projectcalico.org spec: scope: Cluster group: crd.projectcalico.org version: v1 names: kind: GlobalNetworkSet plural: globalnetworksets singular: globalnetworkset --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: networkpolicies.crd.projectcalico.org spec: scope: Namespaced group: crd.projectcalico.org version: v1 names: kind: NetworkPolicy plural: networkpolicies singular: networkpolicy --- # Source: calico/templates/rbac.yaml # Include a clusterrole for the kube-controllers component, # and bind it to the calico-kube-controllers serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-kube-controllers rules: # Nodes are watched to monitor for deletions. - apiGroups: [""] resources: - nodes verbs: - watch - list - get # Pods are queried to check for existence. - apiGroups: [""] resources: - pods verbs: - get # IPAM resources are manipulated when nodes are deleted. - apiGroups: ["crd.projectcalico.org"] resources: - ippools verbs: - list - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities - ipamblocks - ipamhandles verbs: - get - list - create - update - delete # Needs access to update clusterinformations. - apiGroups: ["crd.projectcalico.org"] resources: - clusterinformations verbs: - get - create - update --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-kube-controllers roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-kube-controllers subjects: - kind: ServiceAccount name: calico-kube-controllers namespace: kube-system --- # Include a clusterrole for the calico-node DaemonSet, # and bind it to the calico-node serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: calico-node rules: # The CNI plugin needs to get pods, nodes, and namespaces. - apiGroups: [""] resources: - pods - nodes - namespaces verbs: - get - apiGroups: [""] resources: - endpoints - services verbs: # Used to discover service IPs for advertisement. - watch - list # Used to discover Typhas. - get - apiGroups: [""] resources: - nodes/status verbs: # Needed for clearing NodeNetworkUnavailable flag. - patch # Calico stores some configuration information in node annotations. - update # Watch for changes to Kubernetes NetworkPolicies. - apiGroups: ["networking.k8s.io"] resources: - networkpolicies verbs: - watch - list # Used by Calico for policy information. - apiGroups: [""] resources: - pods - namespaces - serviceaccounts verbs: - list - watch # The CNI plugin patches pods/status. - apiGroups: [""] resources: - pods/status verbs: - patch # Calico monitors various CRDs for config. - apiGroups: ["crd.projectcalico.org"] resources: - globalfelixconfigs - felixconfigurations - bgppeers - globalbgpconfigs - bgpconfigurations - ippools - ipamblocks - globalnetworkpolicies - globalnetworksets - networkpolicies - clusterinformations - hostendpoints verbs: - get - list - watch # Calico must create and update some CRDs on startup. - apiGroups: ["crd.projectcalico.org"] resources: - ippools - felixconfigurations - clusterinformations verbs: - create - update # Calico stores some configuration information on the node. - apiGroups: [""] resources: - nodes verbs: - get - list - watch # These permissions are only requried for upgrade from v2.6, and can # be removed after upgrade or on fresh installations. - apiGroups: ["crd.projectcalico.org"] resources: - bgpconfigurations - bgppeers verbs: - create - update # These permissions are required for Calico CNI to perform IPAM allocations. - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities - ipamblocks - ipamhandles verbs: - get - list - create - update - delete - apiGroups: ["crd.projectcalico.org"] resources: - ipamconfigs verbs: - get # Block affinities must also be watchable by confd for route aggregation. - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities verbs: - watch # The Calico IPAM migration needs to get daemonsets. These permissions can be # removed if not upgrading from an installation using host-local IPAM. - apiGroups: ["apps"] resources: - daemonsets verbs: - get --- apiVersion: rbac.authorization.k8s.io/v1beta1 kind: ClusterRoleBinding metadata: name: calico-node roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-node subjects: - kind: ServiceAccount name: calico-node namespace: kube-system --- # Source: calico/templates/calico-node.yaml # This manifest installs the node container, as well # as the Calico CNI plugins and network config on # each master and worker node in a Kubernetes cluster. kind: DaemonSet apiVersion: extensions/v1beta1 metadata: name: calico-node namespace: kube-system labels: k8s-app: calico-node spec: selector: matchLabels: k8s-app: calico-node updateStrategy: type: RollingUpdate rollingUpdate: maxUnavailable: 1 template: metadata: labels: k8s-app: calico-node annotations: # This, along with the CriticalAddonsOnly toleration below, # marks the pod as a critical add-on, ensuring it gets # priority scheduling and that its resources are reserved # if it ever gets evicted. scheduler.alpha.kubernetes.io/critical-pod: '' spec: nodeSelector: beta.kubernetes.io/os: linux hostNetwork: true tolerations: # Make sure calico-node gets scheduled on all nodes. - effect: NoSchedule operator: Exists # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - effect: NoExecute operator: Exists serviceAccountName: calico-node # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. terminationGracePeriodSeconds: 0 initContainers: # This container performs upgrade from host-local IPAM to calico-ipam. # It can be deleted if this is a fresh installation, or if you have already # upgraded to use calico-ipam. - name: upgrade-ipam image: harbor.xxx.cn/3rd_part/calico/cni:v3.6.1 command: ["/opt/cni/bin/calico-ipam", "-upgrade"] env: - name: KUBERNETES_NODE_NAME valueFrom: fieldRef: fieldPath: spec.nodeName - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend volumeMounts: - mountPath: /var/lib/cni/networks name: host-local-net-dir - mountPath: /host/opt/cni/bin name: cni-bin-dir # This container installs the Calico CNI binaries # and CNI network config file on each node. - name: install-cni image: harbor.xxx.cn/3rd_part/calico/cni:v3.6.1 command: ["/install-cni.sh"] env: # Name of the CNI config file to create. - name: CNI_CONF_NAME value: "10-calico.conflist" # The CNI network config to install on each node. - name: CNI_NETWORK_CONFIG valueFrom: configMapKeyRef: name: calico-config key: cni_network_config # Set the hostname based on the k8s node name. - name: KUBERNETES_NODE_NAME valueFrom: fieldRef: fieldPath: spec.nodeName # CNI MTU Config variable - name: CNI_MTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Prevents the container from sleeping forever. - name: SLEEP value: "false" volumeMounts: - mountPath: /host/opt/cni/bin name: cni-bin-dir - mountPath: /host/etc/cni/net.d name: cni-net-dir containers: # Runs node container on each Kubernetes node. This # container programs network policy and routes on each # host. - name: calico-node image: harbor.xxx.cn/3rd_part/calico/node:v3.6.1 env: # Use Kubernetes API as the backing datastore. - name: DATASTORE_TYPE value: "kubernetes" # Wait for the datastore. - name: WAIT_FOR_DATASTORE value: "true" # Set based on the k8s node name. - name: NODENAME valueFrom: fieldRef: fieldPath: spec.nodeName # Choose the backend to use. - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend # Cluster type to identify the deployment type - name: CLUSTER_TYPE value: "k8s,bgp" # Auto-detect the BGP IP address. - name: IP value: "autodetect" # Enable IPIP - name: CALICO_IPV4POOL_IPIP value: "CrossSubnet" # Set MTU for tunnel device used if ipip is enabled - name: FELIX_IPINIPMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have # no effect. This should fall within `--cluster-cidr`. - name: CALICO_IPV4POOL_CIDR value: "10.244.0.0/16" # Disable file logging so `kubectl logs` works. - name: CALICO_DISABLE_FILE_LOGGING value: "true" # custom node ip range. - name: FELIX_KUBENODEPORTRANGES value: "30000:50000" # Set Felix endpoint to host default action to ACCEPT. - name: FELIX_DEFAULTENDPOINTTOHOSTACTION value: "ACCEPT" # Disable IPv6 on Kubernetes. - name: FELIX_IPV6SUPPORT value: "false" # Set Felix logging to "info" - name: FELIX_LOGSEVERITYSCREEN value: "info" - name: FELIX_HEALTHENABLED value: "true" securityContext: privileged: true resources: requests: cpu: 250m livenessProbe: httpGet: path: /liveness port: 9099 host: localhost periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 readinessProbe: exec: command: - /bin/calico-node - -bird-ready - -felix-ready periodSeconds: 10 volumeMounts: - mountPath: /lib/modules name: lib-modules readOnly: true - mountPath: /run/xtables.lock name: xtables-lock readOnly: false - mountPath: /var/run/calico name: var-run-calico readOnly: false - mountPath: /var/lib/calico name: var-lib-calico readOnly: false volumes: # Used by node. - name: lib-modules hostPath: path: /lib/modules - name: var-run-calico hostPath: path: /var/run/calico - name: var-lib-calico hostPath: path: /var/lib/calico - name: xtables-lock hostPath: path: /run/xtables.lock type: FileOrCreate # Used to install CNI. - name: cni-bin-dir hostPath: path: /opt/cni/bin - name: cni-net-dir hostPath: path: /etc/cni/net.d # Mount in the directory for host-local IPAM allocations. This is # used when upgrading from host-local to calico-ipam, and can be removed # if not using the upgrade-ipam init container. - name: host-local-net-dir hostPath: path: /var/lib/cni/networks --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-node namespace: kube-system --- # Source: calico/templates/calico-kube-controllers.yaml # This manifest deploys the Calico node controller. # See https://github.com/projectcalico/kube-controllers apiVersion: extensions/v1beta1 kind: Deployment metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers annotations: scheduler.alpha.kubernetes.io/critical-pod: '' spec: # The controller can only have a single active instance. replicas: 1 strategy: type: Recreate template: metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: nodeSelector: beta.kubernetes.io/os: linux tolerations: # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - key: node-role.kubernetes.io/master effect: NoSchedule serviceAccountName: calico-kube-controllers containers: - name: calico-kube-controllers image: harbor.xxx.cn/3rd_part/calico/kube-controllers:v3.6.1 env: # Choose which controllers to run. - name: ENABLED_CONTROLLERS value: node - name: DATASTORE_TYPE value: kubernetes readinessProbe: exec: command: - /usr/bin/check-status - -r --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-kube-controllers namespace: kube-system --- # Source: calico/templates/calico-etcd-secrets.yaml --- # Source: calico/templates/calico-typha.yaml --- # Source: calico/templates/configure-canal.yaml
k8s安装之calico.yaml的更多相关文章
- k8s安装之prometheus.yaml
这个系列的东东满多的.要另开系列说明. 这里为了内容连续完成,先贴一个吧,其它configmap,exporter就不展示. 为了保持统一,将prometheus也放到二级目录了. - '--web. ...
- k8s安装之dashboard.yaml
这个我使用了nodeport方式导出来. 为了安装,最好在前面加个nginx作密码验证... 这个端口,可以通过防火墙禁掉. # Copyright 2017 The Kubernetes Autho ...
- k8s安装之node-autoapprove-certificate-server.yaml
kubelet证书分为server和client两种, k8s 1.9默认启用了client证书的自动轮换,但server证书自动轮换需要用户开启.方法是: 2.1 增加 kubelet 参数(现已默 ...
- k8s安装之eventrouter.yaml
k8s的heapster项目中止以后, 事件收集的项目,就推荐使用https://github.com/heptiolabs/eventrouter项目了 Eventrouter This repos ...
- k8s安装之kube-state-metrics.yaml
概述 已经有了cadvisor.heapster.metric-server,几乎容器运行的所有指标都能拿到,但是下面这种情况却无能为力: 我调度了多少个replicas?现在可用的有几个? 多少个P ...
- k8s安装之nginx.yaml
这里两个nginx.一个是用来测试最简单的集群的. 另一个是用来作grafana,prometheus,dashboard前端安全展示的. 简单版 apiVersion: apps/v1 kind: ...
- k8s安装之flannel.yaml
收藏一下,以后直接从这里cp过来用的. flannel新版 --- apiVersion: extensions/v1beta1 kind: PodSecurityPolicy metadata: n ...
- k8s安装之grafana.yaml
这个作展示,够用. 为了使用nginx统一管理, 这里将grafana放在子目录下. - name: GF_SERVER_ROOT_URL value: "%(protocol)s://% ...
- k8s网络之Calico网络
k8s网络主题系列: 一.k8s网络之设计与实现 二.k8s网络之Flannel网络 三.k8s网络之Calico网络 简介 Calico 是一种容器之间互通的网络方案.在虚拟化平台中,比如 Open ...
随机推荐
- SVN 本地文件锁/服务端文件锁清除步骤
1.本地文件锁,直接cleanup,cleanup界面选择break locks即可 2.服务端文件锁,本地文件右击没有release lock或者break lock的选项时 方法1:右键,svn选 ...
- E: Unable to correct problems, you have held broken packages-之apt-get 下载报依赖问题
今天在新来了一台ubutnu 18.04 在安装zabbix客户端是报依赖问题 root@VM_0_10:~# apt-get install zabbix-agent Reading package ...
- 使用clion+cmake+vcpkg的开发现代的c++跨平台程序
使用clion+cmake+vcpkg的开发现代的c++跨平台程序 使用c++开发跨平台的程序 背景 在开发过程中,使用c++作为开发语言,通常被认为是痛苦的,啰嗦的,超长开发时间的.最近几年有各种各 ...
- LeetCode 566. 重塑矩阵(Reshape the Matrix)
566. 重塑矩阵 566. Reshape the Matrix 题目描述 LeetCode LeetCode LeetCode566. Reshape the Matrix简单 Java 实现 c ...
- LeetCode 43. 字符串相乘(Multiply Strings)
43. 字符串相乘 43. Multiply Strings 题目描述 给定两个以字符串形式表示的非负整数 num1 和 num2,返回 num1 和 num2 的乘积,它们的乘积也表示为字符串形式. ...
- Automatically generating nice graphs at end of your Load Test with Apache JMeter and JMeter-Plugins
Update as of November 2017: Since JMeter 3.0, last version being 3.3, JMeter provides Out Of The Box ...
- spring整合quartz报错
今天spring整合quartz报错,最后一步步排查,发现是和redis依赖冲突,最后redis升级了一下,问题解决. 总结:发现问题,逐一排查,如果是整合问题,报类加载不到的错误,大概率是和其他组件 ...
- springmvc的注解配置
springmvc大大减少了对xml的配置,减少了配置量,以及可以在一个controller类中进行多个请求配置 一.springmvc配置 context:component-scan 开启包扫描, ...
- java笔记2—函数
函数: 1.什么是函数? 函数是定义在类中具有特定功能的一段独立小程序. 函数也称方法. 2.函数的格式: [ 修饰符 ] 返回值类型 函数名(参数类型 形式参数) ...
- 关于类视图选择继承APIView还是工具视图(ListAPIView、CreateAPIView等等)
APIView使用方法,直接继承APIView,get或者post请求.方法很简单1.先获取到要操作的数据,然后把数据放到serializer中序列化或者反序列化,最后return返回值(记得.dat ...