You can kill it using:

sudo fuser -k 80/tcp

And then try restarting nginx again:

service nginx start

bind() to 0.0.0.0:80 failed (98: Address already in use)的更多相关文章

  1. 修改nignx报错Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

    Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 这个错误是修改了nginx的配置时出现,表名80端口被程 ...

  2. nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) 错误解决

    今天在做LNMP的时候,启动nginx服务,无法开启,导致网页打不开.把服务从起一下发现提示错误如下: Starting nginx: nginx: [emerg] bind() to 0.0.0.0 ...

  3. nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address 

    http://blog.csdn.net/ownfire/article/details/7966645 今天在做LNMP的时候,启动nginx服务,无法开启,导致网页打不开.把服务从起一下发现提示错 ...

  4. nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)解决

    nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) 报错信息 nginx: [emerg] bind() t ...

  5. nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)解决方案

    前提:已经配置好静态IP以防万一,先安装好iptables服务(不管你装没装,先执行,免得后面添乱)[root@localhost ~]# yum install iptables-services[ ...

  6. Linux教程之：Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

    Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) 使用命令关闭占用80端口的程序 sudo fuser - ...

  7. Nginx 学习笔记（七）如何解决nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)

    出现:nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) 错误,有以下两种情况 1.80端口被占用 2.ipv4端 ...

  8. Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)

    使用命令关闭占用80端口的程序 sudo fuser -k 80/tcp

  9. nginx 中出现nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)

    有其他的程序占用的80端口.只需把相关程序关闭,fuser -k 80/tcp 然后再次 /usr/local/nginx/sbin/nginx,就能开启nginx服务了

随机推荐

  1. spring中propertyplaceholderconfigurer简介

    Spring的框架中为您提供了一个 BeanFactoryPostProcessor 的实作类别: org.springframework.beans.factory.config.PropertyP ...

  2. Mailbox and Mail

    #ifndef __MAILBOX_H__ #define __MAILBOX_H__ #include <stdint.h> #include <stdlib.h> #inc ...

  3. STM32 DFU -- Device Firmware Upgrade

    DFU Class Requests Get Status The Host employs the DFU_GETSTATUS request to facilitate synchronizati ...

  4. OBD Experts OBD II Software OBD II Protocol Stack

    http://www.obdexperts.co.uk/stack.html OBD II Software OBD Experts can provide you with ready to use ...

  5. 解决从内部存储设备安装apk提示Permission Denied

    做应用商店,下载apk,考虑一种情况,如果没有sd卡的情况下就将apk下载到 Internal Cache目录下. 下载都正常,但是在安装的时候提示Permission Denied /data/da ...

  6. ISO13485给企业带来的益处

    1.ISO13485变强制性认证,日益受到欧美和中国政府机构的重视,有利于消除国际贸易中的技术壁垒,是进入国际市场的通行证: 2.提高和改善企业的管理水平,增加企业的知名度: 3.提高和保证产品的质量 ...

  7. 微软ASP.NET网站部署指南（4）：配置项目属性

    1.  综述 有些部署设置能够在项目属性里设置的,而且保持到项目文件中(.csproj或.vbproj). 大多数情况下.你都能够在Visual Studio 选择项目属性Project Proper ...

  8. TP第2个项目总结

    1.参数尼玛传接受要非数字方法 $id = $this->_get('id','intval',0); $field_wc = $this->_get('wc_field'); 2.参数不 ...

  9. [Angular 2] Select From Multiple Nested Angular 2 Elements

    You have complete control over the elements you nest inside of your component instance by using sele ...

  10. C++将username部分用*取代

    简要:非常多时候中奖用户并不希望让别人知道他的ID.程序中我们就将他们的账号部分设置为*号显示. 比如:王小二->王*二. asadjsahd->a*********d. 代码: #inc ...