运维之netstat

实用命令实例

 

1. 列出所有端口 (包括监听和未监听的)

  列出所有端口 netstat -a

# netstat -a | more
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 localhost:30037         *:*                     LISTEN
 udp        0      0 *:bootpc                *:*

Active UNIX domain sockets (servers and established)
 Proto RefCnt Flags       Type       State         I-Node   Path
 unix  2      [ ACC ]     STREAM     LISTENING     6135     /tmp/.X11-unix/X0
 unix  2      [ ACC ]     STREAM     LISTENING     5140     /var/run/acpid.socket

  列出所有 tcp 端口 netstat -at

# netstat -at
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 localhost:30037         *:*                     LISTEN
 tcp        0      0 localhost:ipp           *:*                     LISTEN
 tcp        0      0 *:smtp                  *:*                     LISTEN
 tcp6       0      0 localhost:ipp           [::]:*                  LISTEN

  列出所有 udp 端口 netstat -au

# netstat -au
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 udp        0      0 *:bootpc                *:*
 udp        0      0 *:49119                 *:*
 udp        0      0 *:mdns                  *:*

 

2. 列出所有处于监听状态的 Sockets

  只显示监听端口 netstat -l

# netstat -l
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 localhost:ipp           *:*                     LISTEN
 tcp6       0      0 localhost:ipp           [::]:*                  LISTEN
 udp        0      0 *:49119                 *:*

  只列出所有监听 tcp 端口 netstat -lt

# netstat -lt
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 localhost:30037         *:*                     LISTEN
 tcp        0      0 *:smtp                  *:*                     LISTEN
 tcp6       0      0 localhost:ipp           [::]:*                  LISTEN

  只列出所有监听 udp 端口 netstat -lu

# netstat -lu
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 udp        0      0 *:49119                 *:*
 udp        0      0 *:mdns                  *:*

  只列出所有监听 UNIX 端口 netstat -lx

# netstat -lx
 Active UNIX domain sockets (only servers)
 Proto RefCnt Flags       Type       State         I-Node   Path
 unix  2      [ ACC ]     STREAM     LISTENING     6294     private/maildrop
 unix  2      [ ACC ]     STREAM     LISTENING     6203     public/cleanup
 unix  2      [ ACC ]     STREAM     LISTENING     6302     private/ifmail
 unix  2      [ ACC ]     STREAM     LISTENING     6306     private/bsmtp

3. 显示每个协议的统计信息

  显示所有端口的统计信息 netstat -s

# netstat -s
 Ip:
 11150 total packets received
 1 with invalid addresses
 0 forwarded
 0 incoming packets discarded
 11149 incoming packets delivered
 11635 requests sent out
 Icmp:
 0 ICMP messages received
 0 input ICMP message failed.
 Tcp:
 582 active connections openings
 2 failed connection attempts
 25 connection resets received
 Udp:
 1183 packets received
 4 packets to unknown port received.
 .....

  显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su

# netstat -st 
# netstat -su

4. 在 netstat 输出中显示 PID 和进程名称 netstat -p

netstat -p 可以与其它开关一起使用，就可以添加 “PID/进程名称” 到 netstat 输出中，这样 debugging 的时候可以很方便的发现特定端口运行的程序。

# netstat -pt
 Active Internet connections (w/o servers)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
 tcp        1      0 ramesh-laptop.loc:47212 192.168.185.75:www        CLOSE_WAIT  2109/firefox
 tcp        0      0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox

5. 在 netstat 输出中不显示主机，端口和用户名 (host, port or user)

当你不想让主机，端口和用户名显示，使用 netstat -n。将会使用数字代替那些名称。

同样可以加速输出，因为不用进行比对查询。

# netstat -an

如果只是不想让这三个名称中的一个被显示，使用以下命令

# netsat -a --numeric-ports
# netsat -a --numeric-hosts
# netsat -a --numeric-users

6. 持续输出 netstat 信息

netstat 将每隔一秒输出网络信息。

# netstat -c
 Active Internet connections (w/o servers)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
 tcp        1      1 ramesh-laptop.loc:52564 101.11.169.230:www      CLOSING
 tcp        0      0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
 tcp        1      1 ramesh-laptop.loc:42367 101.101.34.101:www      CLOSING
 ^C

7. 显示系统不支持的地址族 (Address Families)

netstat --verbose

在输出的末尾，会有如下的信息

netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.

8. 显示核心路由信息 netstat -r

# netstat -r
 Kernel IP routing table
 Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
 192.168.1.0     *               255.255.255.0   U         0 0          0 eth2
 link-local      *               255.255.0.0     U         0 0          0 eth2
 default         192.168.1.1     0.0.0.0         UG        0 0          0 eth2

注意： 使用 netstat -rn 显示数字格式，不查询主机名称。

9. 找出程序运行的端口

并不是所有的进程都能找到，没有权限的会不显示，使用 root 权限查看所有的信息。

# netstat -ap | grep ssh
 tcp        1      0 dev-db:ssh           101.174.100.22:39213        CLOSE_WAIT  -
 tcp        1      0 dev-db:ssh           101.174.100.22:57643        CLOSE_WAIT  -

  找出运行在指定端口的进程

# netstat -an | grep ':80'

10. 显示网络接口列表

# netstat -i
 Kernel Interface table
 Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
 eth0       1500 0         0      0      0 0             0      0      0      0 BMU
 eth2       1500 0     26196      0      0 0         26883      6      0      0 BMRU
 lo        16436 0         4      0      0 0             4      0      0      0 LRU

显示详细信息，像是 ifconfig 使用 netstat -ie:

# netstat -ie
 Kernel Interface table
 eth0      Link encap:Ethernet  HWaddr 00:10:40:11:11:11
 UP BROADCAST MULTICAST  MTU:1500  Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 Memory:f6ae0000-f6b00000

 

11. IP和TCP分析

  查看连接某服务端口最多的的IP地址

wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -20
18 221.136.168.36
3 154.74.45.242
2 78.173.31.236
2 62.183.207.98
2 192.168.1.14
2 182.48.111.215
2 124.193.219.34
2 119.145.41.2
2 114.255.41.30
1 75.102.11.99

  TCP各种状态列表

wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT

  先把状态全都取出来,然后使用uniq -c统计，之后再进行排序。

wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'|sort|uniq -c
143 ESTABLISHED
1 FIN_WAIT1
1 Foreign
1 LAST_ACK
36 LISTEN
6 SYN_SENT
113 TIME_WAIT
1 established)

  最后的命令如下:

netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn

分析access.log获得访问前10位的ip地址

awk '{print $1}' access.log |sort|uniq -c|sort -nr|head -