[转帖]如何获得一个RAC Oracle数据库(从Github - oracle/docker-images) - 本地版 ---暂时未做实验.
如何获得一个RAC Oracle数据库(从Github - oracle/docker-images) - 本地版
2019-11-09 16:35:30 dingdingfish 阅读数 32更多
分类专栏： 如何获得一个Oracle数据库
版权声明：本文为博主原创文章，遵循CC 4.0 BY-SA版权协议，转载请附上原文出处链接和本声明。
环境
一台笔记本电脑，Windows操作系统，安装了VirtualBox，Vagrant，Github。
目标
操作系统Oracle Linux 7，运行容器数据库，数据库企业版，RAC，版本为19.3.0，实例名为ORCLCDB，带一个可插拔数据库orclpdb1。两个RAC节点均运行于同一主机。
创建Linux操作系统
克隆项目以获得Linux Vagrant Box：
PS D:\DB> git clone https://github.com/oracle/vagrant-boxes.git
安装磁盘扩展插件：
vagrant plugin install vagrant-disksize
在Vagrantfile中将内存由默认的2048改为8192，然后修改根盘的大小为80G。如下:
...
config.vm.box = "ol7-latest"
config.disksize.size = "80GB"
config.vm.box_url = "https://yum.oracle.com/boxes/oraclelinux/latest/ol7-latest.box"
config.vm.define NAME
config.vm.box_check_update = false
# change memory size
config.vm.provider "virtualbox" do |v|
v.memory = 8192
v.name = NAME
end
...然后创建虚机（Oracle Linux 7）。耗时7分42秒，我的环境一般在7分钟左右。
PS E:\DB\vagrant-boxes\OracleLinux\7> vagrant up
启动VM后，磁盘是64G，但根分区仍是32G:
$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 0 3.8G 0% /dev/shm
tmpfs 3.8G 8.5M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 32G 1.7G 31G 6% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.1T 753G 60% /vagrant
tmpfs 771M 0 771M 0% /run/user/1000
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 15.6G 0 disk
sda 8:0 0 80G 0 disk
├─sda2 8:2 0 36G 0 part
│ ├─vg_main-lv_swap 252:1 0 4G 0 lvm [SWAP]
│ └─vg_main-lv_root 252:0 0 32G 0 lvm /
└─sda1 8:1 0 500M 0 part /boot
因此需要扩展分区，大致过程如下：
fdisk /dev/sda (n, p, <Enter>, <Enter>, w) -> 产生新分区/dev/sda3
partprobe
pvcreate /dev/sda
vgextend vg_main /dev/sda3
lvextend /dev/vg_main/lv_root /dev/sda3
xfs_growfs /扩容后的空间：
# df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 0 3.8G 0% /dev/shm
tmpfs 3.8G 8.5M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 76G 1.7G 74G 3% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.1T 753G 60% /vagrant
tmpfs 771M 0 771M 0% /run/user/1000
以下操作均登入Linux中运行。
安装Docker
安装Docker，耗时0m49.161s：
sudo yum install -y yum-utils
sudo yum-config-manager --enable ol7_addons
sudo yum install -y docker-engine
sudo systemctl start docker
sudo systemctl enable docker
sudo usermod -aG docker vagrant确认docker安装成功:
$ docker version
Client: Docker Engine - Community
Version: 18.09.8-ol
API version: 1.39
Go version: go1.10.8
Git commit: 76804b7
Built: Fri Sep 27 21:00:18 2019
OS/Arch: linux/amd64
Experimental: false
Server: Docker Engine - Community
Engine:
Version: 18.09.8-ol
API version: 1.39 (minimum version 1.12)
Go version: go1.10.8
Git commit: 76804b7
Built: Fri Sep 27 20:54:00 2019
OS/Arch: linux/amd64
Experimental: false
Default Registry: docker.io
克隆Github项目
耗时0m31.599s：
sudo yum install -y git
git clone https://github.com/oracle/docker-images.git设置内核参数
docker会从Host OS继承参数，因此需在文件/etc/sysctl.conf中设置以下参数：
fs.file-max = 6815744
net.core.rmem_max = 4194304
net.core.rmem_default = 262144
net.core.wmem_max = 1048576
net.core.wmem_default = 262144
net.core.rmem_default = 262144使其生效：
sudo sysctl -a
sudo sysctl -p创建虚拟网络
docker network create --driver=bridge --subnet=172.16.1.0/24 rac_pub1_nw
docker network create --driver=bridge --subnet=192.168.17.0/24 rac_priv1_nw
查看状态：
$ docker network ls
NETWORK ID NAME DRIVER SCOPE
aac5636fe8fc bridge bridge local
051a1439f036 host host local
1a9007862a18 none null local
fe35e54e1aa0 rac_priv1_nw bridge local
0c6bdebeab78 rac_pub1_nw bridge local
配置实时模式
RAC的某些进程需要运行在实时模式，因此需要在文件/etc/sysconfig/docker中添加以下：
OPTIONS='--selinux-enabled --cpu-rt-runtime=950000'
使其生效：
sudo systemctl daemon-reload
sudo systemctl stop docker
sudo systemctl start docker
SELINUX 配置为 permissive模式（/etc/selinux/config），过程略。
然后重启实例使得SELINUX生效。
此时的空间状态：
$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 0 3.8G 0% /dev/shm
tmpfs 3.8G 8.5M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 76G 2.1G 74G 3% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.1T 753G 60% /vagrant
tmpfs 771M 0 771M 0% /run/user/1000将安装文件拷贝到目录
耗时真的看运气，有时7分钟，最近一次1分半：
cd docker-images/OracleDatabase/RAC/OracleRealApplicationClusters/dockerfiles/19.3.0
cp /vagrant/LINUX.X64_193000_db_home.zip .
cp /vagrant/LINUX.X64_193000_grid_home.zip .
此时的空间状态：
$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 0 3.8G 0% /dev/shm
tmpfs 3.8G 8.5M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 76G 7.6G 68G 11% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.1T 745G 61% /vagrant
tmpfs 771M 0 771M 0% /run/user/1000构建Docker Install Image
这一步最重要的任务就是拷贝介质和配置脚本，还有从网络下载OS更新。然后安装GI和数据库。
执行以下命令开始构建：
$ cd docker-images/OracleDatabase/RAC/OracleRealApplicationClusters/dockerfiles
$ ls
12.2.0.1 18.3.0 19.3.0 buildDockerImage.sh
$ time ./buildDockerImage.sh -v 19.3.0如果空间不够，会报错：
...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
checkSpace.sh: ERROR - There is not enough space available in the docker container.
checkSpace.sh: The container needs at least 35 GB , but only 14 available.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
...
There was an error building the image.以下是成功时的完整日志，整个过程耗时58分钟：
$ time ./buildDockerImage.sh -v 19.3.0
Checking if required packages are present and valid...
LINUX.X64_193000_grid_home.zip: OK
LINUX.X64_193000_db_home.zip: OK
==========================
DOCKER info:
Containers: 0
Running: 0
Paused: 0
Stopped: 0
Images: 0
Server Version: 18.09.8-ol
Storage Driver: overlay2
Backing Filesystem: xfs
Supports d_type: true
Native Overlay Diff: false
Logging Driver: json-file
Cgroup Driver: cgroupfs
Plugins:
Volume: local
Network: bridge host macvlan null overlay
Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog
Swarm: inactive
Runtimes: runc
Default Runtime: runc
Init Binary: docker-init
containerd version: c4446665cb9c30056f4998ed953e6d4ff22c7c39
runc version: 4bb1fe4ace1a32d3676bb98f5d3b6a4e32bf6c58
init version: fec3683
Security Options:
seccomp
Profile: default
selinux
Kernel Version: 4.14.35-1902.6.6.el7uek.x86_64
Operating System: Oracle Linux Server 7.7
OSType: linux
Architecture: x86_64
CPUs: 2
Total Memory: 7.528GiB
Name: ol7-vagrant-rac
ID: MS7Y:32TG:TGTF:C3QP:DR4Q:IDG4:RHHS:SQVW:5QWY:U45Z:ZCXK:BDCP
Docker Root Dir: /var/lib/docker
Debug Mode (client): false
Debug Mode (server): false
Registry: https://index.docker.io/v1/
Labels:
Experimental: false
Insecure Registries:
127.0.0.0/8
Live Restore Enabled: false
Product License: Community Engine
Registries: docker.io (secure)
==========================
Building image 'oracle/database-rac:19.3.0' ...
Sending build context to Docker daemon 5.949GB
Step 1/11 : FROM oraclelinux:7-slim
Trying to pull repository docker.io/library/oraclelinux ...
7-slim: Pulling from docker.io/library/oraclelinux
a316717fc6ee: Pull complete
Digest: sha256:c5f3baff726ffd97c7e9574e803ad0e8a1e5c7de236325eed9e87f853a746e90
Status: Downloaded newer image for oraclelinux:7-slim
---> 874477adb545
Step 2/11 : MAINTAINER Paramdeep Saini <paramdeep.saini@oracle.com>
---> Running in a1b3685f3111
Removing intermediate container a1b3685f3111
---> 8187c15c17ab
Step 3/11 : ENV SETUP_LINUX_FILE="setupLinuxEnv.sh" INSTALL_DIR=/opt/scripts GRID_BASE=/u01/app/grid GRID_HOME=/u01/app/19.3.0/grid INSTALL_FILE_1="LINUX.X64_193000_grid_home.zip" GRID_INSTALL_RSP="gridsetup_19c.rsp" GRID_SW_INSTALL_RSP="grid_sw_install_19c.rsp" GRID_SETUP_FILE="setupGrid.sh" FIXUP_PREQ_FILE="fixupPreq.sh" INSTALL_GRID_BINARIES_FILE="installGridBinaries.sh" INSTALL_GRID_PATCH="applyGridPatch.sh" INVENTORY=/u01/app/oraInventory CONFIGGRID="configGrid.sh" ADDNODE="AddNode.sh" DELNODE="DelNode.sh" ADDNODE_RSP="grid_addnode.rsp" SETUPSSH="setupSSH.expect" DOCKERORACLEINIT="dockeroracleinit" GRID_USER_HOME="/home/grid" SETUPGRIDENV="setupGridEnv.sh" ASM_DISCOVERY_DIR="/dev" RESET_OS_PASSWORD="resetOSPassword.sh" MULTI_NODE_INSTALL="MultiNodeInstall.py" DB_BASE=/u01/app/oracle DB_HOME=/u01/app/oracle/product/19.3.0/dbhome_1 INSTALL_FILE_2="LINUX.X64_193000_db_home.zip" DB_INSTALL_RSP="db_sw_install_19c.rsp" DBCA_RSP="dbca_19c.rsp" DB_SETUP_FILE="setupDB.sh" PWD_FILE="setPassword.sh" RUN_FILE="runOracle.sh" STOP_FILE="stopOracle.sh" ENABLE_RAC_FILE="enableRAC.sh" CHECK_DB_FILE="checkDBStatus.sh" USER_SCRIPTS_FILE="runUserScripts.sh" REMOTE_LISTENER_FILE="remoteListener.sh" INSTALL_DB_BINARIES_FILE="installDBBinaries.sh" GRID_HOME_CLEANUP="GridHomeCleanup.sh" ORACLE_HOME_CLEANUP="OracleHomeCleanup.sh" DB_USER="oracle" GRID_USER="grid" FUNCTIONS="functions.sh" COMMON_SCRIPTS="/common_scripts" CHECK_SPACE_FILE="checkSpace.sh" RESET_FAILED_UNITS="resetFailedUnits.sh" SET_CRONTAB="setCrontab.sh" CRONTAB_ENTRY="crontabEntry" EXPECT="/usr/bin/expect" BIN="/usr/sbin" container="true"
---> Running in 01dfaa3cc133
Removing intermediate container 01dfaa3cc133
---> be15b2094e53
Step 4/11 : ENV INSTALL_SCRIPTS=$INSTALL_DIR/install PATH=/bin:/usr/bin:/sbin:/usr/sbin:$PATH SCRIPT_DIR=$INSTALL_DIR/startup GRID_PATH=$GRID_HOME/bin:$GRID_HOME/OPatch/:/usr/sbin:$PATH DB_PATH=$DB_HOME/bin:$DB_HOME/OPatch/:/usr/sbin:$PATH GRID_LD_LIBRARY_PATH=$GRID_HOME/lib:/usr/lib:/lib DB_LD_LIBRARY_PATH=$DB_HOME/lib:/usr/lib:/lib
---> Running in 7c6a76bc6baf
Removing intermediate container 7c6a76bc6baf
---> 1666646716e1
Step 5/11 : COPY $GRID_SW_INSTALL_RSP $INSTALL_GRID_PATCH $SETUP_LINUX_FILE $GRID_SETUP_FILE $INSTALL_GRID_BINARIES_FILE $FIXUP_PREQ_FILE $DB_SETUP_FILE $CHECK_SPACE_FILE $DB_INSTALL_RSP $INSTALL_DB_BINARIES_FILE $ENABLE_RAC_FILE $GRID_HOME_CLEANUP $ORACLE_HOME_CLEANUP $INSTALL_FILE_1 $INSTALL_FILE_2 $INSTALL_SCRIPTS/
---> aeded06d0a00
Step 6/11 : COPY $RUN_FILE $ADDNODE $ADDNODE_RSP $SETUPSSH $FUNCTIONS $CONFIGGRID $GRID_INSTALL_RSP $DBCA_RSP $PWD_FILE $CHECK_DB_FILE $USER_SCRIPTS_FILE $STOP_FILE $CHECK_DB_FILE $REMOTE_LISTENER_FILE $SETUPGRIDENV $DELNODE $RESET_OS_PASSWORD $MULTI_NODE_INSTALL $SCRIPT_DIR/
---> b9b139ebda70
Step 7/11 : RUN chmod 755 $INSTALL_SCRIPTS/*.sh && sync && $INSTALL_DIR/install/$CHECK_SPACE_FILE && $INSTALL_DIR/install/$SETUP_LINUX_FILE && $INSTALL_DIR/install/$GRID_SETUP_FILE && $INSTALL_DIR/install/$DB_SETUP_FILE && sed -e '/hard *memlock/s/^/#/g' -i /etc/security/limits.d/oracle-database-preinstall-19c.conf && su $GRID_USER -c "$INSTALL_DIR/install/$INSTALL_GRID_BINARIES_FILE EE $PATCH_NUMBER" && $INVENTORY/orainstRoot.sh && $GRID_HOME/root.sh && su $DB_USER -c "$INSTALL_DIR/install/$INSTALL_DB_BINARIES_FILE EE" && su $DB_USER -c "$INSTALL_DIR/install/$ENABLE_RAC_FILE" && $INVENTORY/orainstRoot.sh && $DB_HOME/root.sh && su $GRID_USER -c "$INSTALL_SCRIPTS/$GRID_HOME_CLEANUP" && su $DB_USER -c "$INSTALL_SCRIPTS/$ORACLE_HOME_CLEANUP" && $INSTALL_DIR/install/$FIXUP_PREQ_FILE && rm -rf $INSTALL_DIR/install && rm -rf $INSTALL_DIR/install && sync && chmod 755 $SCRIPT_DIR/*.sh && chmod 755 $SCRIPT_DIR/*.expect && chmod 666 $SCRIPT_DIR/*.rsp && echo "nohup $SCRIPT_DIR/runOracle.sh &" >> /etc/rc.local && rm -f /etc/rc.d/init.d/oracle-database-preinstall-19c-firstboot && mkdir -p $GRID_HOME/dockerinit && cp $GRID_HOME/bin/$DOCKERORACLEINIT $GRID_HOME/dockerinit/ && chown $GRID_USER:oinstall $GRID_HOME/dockerinit && chown root:oinstall $GRID_HOME/dockerinit/$DOCKERORACLEINIT && chmod 4755 $GRID_HOME/dockerinit/$DOCKERORACLEINIT && ln -s $GRID_HOME/dockerinit/$DOCKERORACLEINIT /usr/sbin/oracleinit && chmod +x /etc/rc.d/rc.local && rm -f /etc/sysctl.d/99-oracle-database-preinstall-19c-sysctl.conf && rm -f /etc/sysctl.d/99-sysctl.conf && sync
---> Running in c40a0e8ea8ed
Loaded plugins: ovl
No package openssh-client available.
Resolving Dependencies
--> Running transaction check
---> Package e2fsprogs.x86_64 0:1.42.9-16.el7 will be installed
...
Transaction Summary
================================================================================
Install 14 Packages (+109 Dependent packages)
Upgrade ( 9 Dependent packages)
Total download size: 70 M
Downloading packages:
Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
...
Complete!
Loaded plugins: ovl
Cleaning repos: ol7_UEKR5 ol7_developer_EPEL ol7_latest
...
/opt/scripts/install/installGridBinaries.sh: line 57: : command not found
Launching Oracle Grid Infrastructure Setup Wizard...
[WARNING] [INS-13014] Target environment does not meet some optional requirements.
CAUSE: Some of the optional prerequisites are not met. See logs for details. gridSetupActions2019-11-11_03-39-25AM.log
ACTION: Identify the list of failed prerequisite checks from the log: gridSetupActions2019-11-11_03-39-25AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
The response file for this session can be found at:
/u01/app/19.3.0/grid/install/response/grid_2019-11-11_03-39-25AM.rsp
You can find the log of this install session at:
/tmp/GridSetupActions2019-11-11_03-39-25AM/gridSetupActions2019-11-11_03-39-25AM.log
As a root user, execute the following script(s):
1. /u01/app/oraInventory/orainstRoot.sh
2. /u01/app/19.3.0/grid/root.sh
Execute /u01/app/oraInventory/orainstRoot.sh on the following nodes:
[c40a0e8ea8ed]
Execute /u01/app/19.3.0/grid/root.sh on the following nodes:
[c40a0e8ea8ed]
Successfully Setup Software with warning(s).
Moved the install session logs to:
/u01/app/oraInventory/logs/GridSetupActions2019-11-11_03-39-25AM
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
Check /u01/app/19.3.0/grid/install/root_c40a0e8ea8ed_2019-11-11_03-41-46-398462346.log for the output of root script
Launching Oracle Database Setup Wizard...
[WARNING] [INS-13014] Target environment does not meet some optional requirements.
CAUSE: Some of the optional prerequisites are not met. See logs for details. /u01/app/oraInventory/logs/InstallActions2019-11-11_03-46-31AM/installActions2019-11-11_03-46-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: /u01/app/oraInventory/logs/InstallActions2019-11-11_03-46-31AM/installActions2019-11-11_03-46-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
The response file for this session can be found at:
/u01/app/oracle/product/19.3.0/dbhome_1/install/response/db_2019-11-11_03-46-31AM.rsp
You can find the log of this install session at:
/u01/app/oraInventory/logs/InstallActions2019-11-11_03-46-31AM/installActions2019-11-11_03-46-31AM.log
As a root user, execute the following script(s):
1. /u01/app/oracle/product/19.3.0/dbhome_1/root.sh
Execute /u01/app/oracle/product/19.3.0/dbhome_1/root.sh on the following nodes:
[c40a0e8ea8ed]
Successfully Setup Software with warning(s).
(if /u01/app/oracle/product/19.3.0/dbhome_1/bin/skgxpinfo | grep rds;\
then \
make -f /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/ins_rdbms.mk ipc_rds; \
else \
make -f /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/ins_rdbms.mk ipc_g; \
fi)
make[1]: Entering directory `/'
rm -f /u01/app/oracle/product/19.3.0/dbhome_1/lib/libskgxp19.so
cp /u01/app/oracle/product/19.3.0/dbhome_1/lib//libskgxpg.so /u01/app/oracle/product/19.3.0/dbhome_1/lib/libskgxp19.so
make[1]: Leaving directory `/'
- Use stub SKGXN library
cp /u01/app/oracle/product/19.3.0/dbhome_1/lib/libskgxns.so /u01/app/oracle/product/19.3.0/dbhome_1/lib/libskgxn2.so
/usr/bin/ar d /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/libknlopt.a ksnkcs.o
/usr/bin/ar cr /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/libknlopt.a /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/kcsm.o
chmod 755 /u01/app/oracle/product/19.3.0/dbhome_1/bin
- Linking Oracle
rm -f /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/oracle
/u01/app/oracle/product/19.3.0/dbhome_1/bin/orald -o /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/oracle -m64 -z noexecstack -Wl,--disable-new-dtags -L/u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/ -L/u01/app/oracle/product/19.3.0/dbhome_1/lib/ -L/u01/app/oracle/product/19.3.0/dbhome_1/lib/stubs/ -Wl,-E /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/opimai.o /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/ssoraed.o /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/ttcsoi.o -Wl,--whole-archive -lperfsrv19 -Wl,--no-whole-archive /u01/app/oracle/product/19.3.0/dbhome_1/lib/nautab.o /u01/app/oracle/product/19.3.0/dbhome_1/lib/naeet.o /u01/app/oracle/product/19.3.0/dbhome_1/lib/naect.o /u01/app/oracle/product/19.3.0/dbhome_1/lib/naedhs.o /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/config.o -ldmext -lserver19 -lodm19 -lofs -lcell19 -lnnet19 -lskgxp19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lxml19 -lcore19 -lunls19 -lsnls19 -lnls19 -lcore19 -lnls19 -lclient19 -lvsnst19 -lcommon19 -lgeneric19 -lknlopt -loraolap19 -lskjcx19 -lslax19 -lpls19 -lrt -lplp19 -ldmext -lserver19 -lclient19 -lvsnst19 -lcommon19 -lgeneric19 `if [ -f /u01/app/oracle/product/19.3.0/dbhome_1/lib/libavserver19.a ] ; then echo "-lavserver19" ; else echo "-lavstub19"; fi` `if [ -f /u01/app/oracle/product/19.3.0/dbhome_1/lib/libavclient19.a ] ; then echo "-lavclient19" ; fi` -lknlopt -lslax19 -lpls19 -lrt -lplp19 -ljavavm19 -lserver19 -lwwg `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/ldflags` -lncrypt19 -lnsgr19 -lnzjs19 -ln19 -lnl19 -lngsmshd19 -lnro19 `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/ldflags` -lncrypt19 -lnsgr19 -lnzjs19 -ln19 -lnl19 -lngsmshd19 -lnnzst19 -lzt19 -lztkg19 -lmm -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lxml19 -lcore19 -lunls19 -lsnls19 -lnls19 -lcore19 -lnls19 -lztkg19 `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/ldflags` -lncrypt19 -lnsgr19 -lnzjs19 -ln19 -lnl19 -lngsmshd19 -lnro19 `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/ldflags` -lncrypt19 -lnsgr19 -lnzjs19 -ln19 -lnl19 -lngsmshd19 -lnnzst19 -lzt19 -lztkg19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lxml19 -lcore19 -lunls19 -lsnls19 -lnls19 -lcore19 -lnls19 `if /usr/bin/ar tv /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo19 -lserver19"; fi` -L/u01/app/oracle/product/19.3.0/dbhome_1/ctx/lib/ -lctxc19 -lctx19 -lzx19 -lgx19 -lctx19 -lzx19 -lgx19 -lclscest19 -loevm -lclsra19 -ldbcfg19 -lhasgen19 -lskgxn2 -lnnzst19 -lzt19 -lxml19 -lgeneric19 -locr19 -locrb19 -locrutl19 -lhasgen19 -lskgxn2 -lnnzst19 -lzt19 -lxml19 -lgeneric19 -lgeneric19 -lorazip -loraz -llzopro5 -lorabz2 -lorazstd -loralz4 -lipp_z -lipp_bz2 -lippdc -lipps -lippcore -lippcp -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lxml19 -lcore19 -lunls19 -lsnls19 -lnls19 -lcore19 -lnls19 -lsnls19 -lunls19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lcore19 -lsnls19 -lnls19 -lxml19 -lcore19 -lunls19 -lsnls19 -lnls19 -lcore19 -lnls19 -lasmclnt19 -lcommon19 -lcore19 -ledtn19 -laio -lons -lmql1 -lipc1 -lfthread19 `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/product/19.3.0/dbhome_1/lib -lm `cat /u01/app/oracle/product/19.3.0/dbhome_1/lib/sysliblist` -ldl -lm -L/u01/app/oracle/product/19.3.0/dbhome_1/lib `test -x /usr/bin/hugeedit -a -r /usr/lib64/libhugetlbfs.so && test -r /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/shugetlbfs.o && echo -Wl,-zcommon-page-size=2097152 -Wl,-zmax-page-size=2097152 -lhugetlbfs`
rm -f /u01/app/oracle/product/19.3.0/dbhome_1/bin/oracle
mv /u01/app/oracle/product/19.3.0/dbhome_1/rdbms/lib/oracle /u01/app/oracle/product/19.3.0/dbhome_1/bin/oracle
chmod 6751 /u01/app/oracle/product/19.3.0/dbhome_1/bin/oracle
(if [ ! -f /u01/app/oracle/product/19.3.0/dbhome_1/bin/crsd.bin ]; then \
getcrshome="/u01/app/oracle/product/19.3.0/dbhome_1/srvm/admin/getcrshome" ; \
if [ -f "$getcrshome" ]; then \
crshome="`$getcrshome`"; \
if [ -n "$crshome" ]; then \
if [ $crshome != /u01/app/oracle/product/19.3.0/dbhome_1 ]; then \
oracle="/u01/app/oracle/product/19.3.0/dbhome_1/bin/oracle"; \
$crshome/bin/setasmgidwrap oracle_binary_path=$oracle; \
fi \
fi \
fi \
fi\
);
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
Check /u01/app/oracle/product/19.3.0/dbhome_1/install/root_c40a0e8ea8ed_2019-11-11_03-51-20-097025139.log for the output of root script
Preparing... ########################################
Updating / installing...
cvuqdisk-1.0.10-1 ########################################
Removing intermediate container c40a0e8ea8ed
---> 947c42f51105
Step 8/11 : USER grid
---> Running in f12659d9d383
Removing intermediate container f12659d9d383
---> 06b8b4dcd15e
Step 9/11 : WORKDIR /home/grid
---> Running in 0106cd633ef9
Removing intermediate container 0106cd633ef9
---> c2ad15635695
Step 10/11 : VOLUME ["/common_scripts"]
---> Running in d817b9de8b29
Removing intermediate container d817b9de8b29
---> c0465d5925d5
Step 11/11 : CMD ["/usr/sbin/oracleinit"]
---> Running in 499d3e1cf5d9
Removing intermediate container 499d3e1cf5d9
---> 049f87053beb
Successfully built 049f87053beb
Successfully tagged oracle/database-rac:19.3.0
Oracle Database Docker Image for Real Application Clusters (RAC) version 19.3.0 is ready to be extended:
--> oracle/database-rac:19.3.0
Build completed in 3463 seconds.
real 57m55.524s
user 0m16.831s
sys 0m20.288s
至此，数据库的RAC docker image就绪。linux image使用的瘦身版。
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
oracle/database-rac 19.3.0 049f87053beb About an hour ago 20.6GB
oraclelinux 7-slim 874477adb545 3 months ago 118MB
此时的空间状态：
$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs 3.8G 0 3.8G 0% /dev/shm
tmpfs 3.8G 8.5M 3.8G 1% /run
tmpfs 3.8G 0 3.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 76G 27G 49G 36% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.2T 698G 63% /vagrant
tmpfs 771M 0 771M 0% /run/user/1000
实际上，此时可以删除数据库和GI的安装介质了。
创建共享主机解析文件
sudo mkdir /opt/containers
sudo touch /opt/containers/rac_host_file准备共享磁盘（块设备）
停止虚机。vagrant halt
挂接50G磁盘。VBoxManage createmedium disk和VBoxManage storageattach
启动虚机。vagrant up
确认可看到新盘，本例为sdc：
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 15.6G 0 disk
sdc 8:32 0 50G 0 disk
sda 8:0 0 80G 0 disk
├─sda2 8:2 0 36G 0 part
│ ├─vg_main-lv_swap 252:1 0 4G 0 lvm [SWAP]
│ └─vg_main-lv_root 252:0 0 75.5G 0 lvm /
├─sda3 8:3 0 43.5G 0 part
│ └─vg_main-lv_root 252:0 0 75.5G 0 lvm /
└─sda1 8:1 0 500M 0 part /boot
初始化磁盘以确保其上无文件系统：
$ sudo dd if=/dev/zero of=/dev/sdc bs=8k count=10000口令管理
以下设置的口令为oracle和grid操作系统用户以及数据库共同使用。
mkdir /opt/.secrets/
openssl rand -hex 64 -out /opt/.secrets/pwd.key
-- 将口令明码写入临时文件
echo Oracle.123# >/opt/.secrets/common_os_pwdfile
-- 加密后存储
openssl enc -aes-256-cbc -salt -in /opt/.secrets/common_os_pwdfile -out /opt/.secrets/common_os_pwdfile.enc -pass file:/opt/.secrets/pwd.key
-- 删除临时文件
rm -f /opt/.secrets/common_os_pwdfile创建第一个RAC节点：racnode1容器
先创建容器：
docker create -t -i \
--hostname racnode1 \
--volume /boot:/boot:ro \
--volume /dev/shm \
--tmpfs /dev/shm:rw,exec,size=4G \
--volume /opt/containers/rac_host_file:/etc/hosts \
--volume /opt/.secrets:/run/secrets \
--dns-search=example.com \
--device=/dev/sdc:/dev/asm_disk1 \
--privileged=false \
--cap-add=SYS_NICE \
--cap-add=SYS_RESOURCE \
--cap-add=NET_ADMIN \
-e NODE_VIP=172.16.1.160 \
-e VIP_HOSTNAME=racnode1-vip \
-e PRIV_IP=192.168.17.150 \
-e PRIV_HOSTNAME=racnode1-priv \
-e PUBLIC_IP=172.16.1.150 \
-e PUBLIC_HOSTNAME=racnode1 \
-e SCAN_NAME=racnode-scan \
-e SCAN_IP=172.16.1.70 \
-e OP_TYPE=INSTALL \
-e DOMAIN=example.com \
-e ASM_DEVICE_LIST=/dev/asm_disk1 \
-e ASM_DISCOVERY_DIR=/dev \
-e COMMON_OS_PWD_FILE=common_os_pwdfile.enc \
-e PWD_KEY=pwd.key \
--restart=always --tmpfs=/run -v /sys/fs/cgroup:/sys/fs/cgroup:ro \
--cpu-rt-runtime=95000 --ulimit rtprio=99 \
--name racnode1 \
oracle/database-rac:19.3.0查看状态：
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
aa88f55d68cd oracle/database-rac:19.3.0 "/usr/sbin/oracleinit" 5 seconds ago Created racnode1
配置racnode1的网络：
docker network disconnect bridge racnode1
docker network connect rac_pub1_nw --ip 172.16.1.150 racnode1
docker network connect rac_priv1_nw --ip 192.168.17.150 racnode1启动第一个容器：
docker start racnode1查看日志：
docker logs -f racnode1在容器内部或在宿主机都可以查看到dbca 进程，这个比较神奇。
以下命令可登录到容器内部：
docker exec -it racnode1 bash在/u01/app/oracle/cfgtoollogs/dbca/ORCLCDB中可以查看到dbca的日志。
以下为成功执行时的完整日志，可知首先内存还是配小了，另外整个过程耗时1小时50分：
$ docker logs -f racnode1
PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=racnode1
TERM=xterm
NODE_VIP=172.16.1.160
VIP_HOSTNAME=racnode1-vip
PRIV_IP=192.168.17.150
PRIV_HOSTNAME=racnode1-priv
PUBLIC_IP=172.16.1.150
PUBLIC_HOSTNAME=racnode1
SCAN_NAME=racnode-scan
SCAN_IP=172.16.1.70
OP_TYPE=INSTALL
DOMAIN=example.com
ASM_DEVICE_LIST=/dev/asm_disk1
ASM_DISCOVERY_DIR=/dev
COMMON_OS_PWD_FILE=common_os_pwdfile.enc
PWD_KEY=pwd.key
SETUP_LINUX_FILE=setupLinuxEnv.sh
INSTALL_DIR=/opt/scripts
GRID_BASE=/u01/app/grid
GRID_HOME=/u01/app/19.3.0/grid
INSTALL_FILE_1=LINUX.X64_193000_grid_home.zip
GRID_INSTALL_RSP=gridsetup_19c.rsp
GRID_SW_INSTALL_RSP=grid_sw_install_19c.rsp
GRID_SETUP_FILE=setupGrid.sh
FIXUP_PREQ_FILE=fixupPreq.sh
INSTALL_GRID_BINARIES_FILE=installGridBinaries.sh
INSTALL_GRID_PATCH=applyGridPatch.sh
INVENTORY=/u01/app/oraInventory
CONFIGGRID=configGrid.sh
ADDNODE=AddNode.sh
DELNODE=DelNode.sh
ADDNODE_RSP=grid_addnode.rsp
SETUPSSH=setupSSH.expect
DOCKERORACLEINIT=dockeroracleinit
GRID_USER_HOME=/home/grid
SETUPGRIDENV=setupGridEnv.sh
RESET_OS_PASSWORD=resetOSPassword.sh
MULTI_NODE_INSTALL=MultiNodeInstall.py
DB_BASE=/u01/app/oracle
DB_HOME=/u01/app/oracle/product/19.3.0/dbhome_1
INSTALL_FILE_2=LINUX.X64_193000_db_home.zip
DB_INSTALL_RSP=db_sw_install_19c.rsp
DBCA_RSP=dbca_19c.rsp
DB_SETUP_FILE=setupDB.sh
PWD_FILE=setPassword.sh
RUN_FILE=runOracle.sh
STOP_FILE=stopOracle.sh
ENABLE_RAC_FILE=enableRAC.sh
CHECK_DB_FILE=checkDBStatus.sh
USER_SCRIPTS_FILE=runUserScripts.sh
REMOTE_LISTENER_FILE=remoteListener.sh
INSTALL_DB_BINARIES_FILE=installDBBinaries.sh
GRID_HOME_CLEANUP=GridHomeCleanup.sh
ORACLE_HOME_CLEANUP=OracleHomeCleanup.sh
DB_USER=oracle
GRID_USER=grid
FUNCTIONS=functions.sh
COMMON_SCRIPTS=/common_scripts
CHECK_SPACE_FILE=checkSpace.sh
RESET_FAILED_UNITS=resetFailedUnits.sh
SET_CRONTAB=setCrontab.sh
CRONTAB_ENTRY=crontabEntry
EXPECT=/usr/bin/expect
BIN=/usr/sbin
container=true
INSTALL_SCRIPTS=/opt/scripts/install
SCRIPT_DIR=/opt/scripts/startup
GRID_PATH=/u01/app/19.3.0/grid/bin:/u01/app/19.3.0/grid/OPatch/:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
DB_PATH=/u01/app/oracle/product/19.3.0/dbhome_1/bin:/u01/app/oracle/product/19.3.0/dbhome_1/OPatch/:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
GRID_LD_LIBRARY_PATH=/u01/app/19.3.0/grid/lib:/usr/lib:/lib
DB_LD_LIBRARY_PATH=/u01/app/oracle/product/19.3.0/dbhome_1/lib:/usr/lib:/lib
HOME=/home/grid
Failed to parse kernel command line, ignoring: No such file or directory
systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
Detected virtualization other.
Detected architecture x86-64.
Welcome to Oracle Linux Server 7.6!
Set hostname to <racnode1>.
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directoryFailed to parse kernel command line, ignoring: No such file or directory
/usr/lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
Binding to IPv6 address not available since kernel does not support IPv6.
Binding to IPv6 address not available since kernel does not support IPv6.
Cannot add dependency job for unit display-manager.service, ignoring: Unit not found.
[ OK ] Reached target Swap.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Created slice Root Slice.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Created slice System Slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on Journal Socket.
Starting Read and set NIS domainname from /etc/sysconfig/network...
Starting Configure read-only root support...
Starting Journal Service...
Starting Rebuild Hardware Database...
Couldn't determine result for ConditionKernelCommandLine=|rd.modules-load for systemd-modules-load.service, assuming failed: No such file or directory
Couldn't determine result for ConditionKernelCommandLine=|modules-load for systemd-modules-load.service, assuming failed: No such file or directory
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target RPC Port Mapper.
[ OK ] Started Journal Service.
[ OK ] Started Read and set NIS domainname from /etc/sysconfig/network.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Configure read-only root support.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.
Starting Mark the need to relabel after reboot...
Starting Preprocess NFS configuration...
Starting Rebuild Journal Catalog...
Starting Create Volatile Files and Directories...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Mark the need to relabel after reboot.
[ OK ] Started Preprocess NFS configuration.
[ OK ] Started Rebuild Journal Catalog.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Mounting RPC Pipe File System...
[FAILED] Failed to mount RPC Pipe File System.
See 'systemctl status var-lib-nfs-rpc_pipefs.mount' for details.
[DEPEND] Dependency failed for rpc_pipefs.target.
[DEPEND] Dependency failed for RPC security service for NFS client and server.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Rebuild Hardware Database.
Starting Update is Completed...
[ OK ] Started Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Started Flexible branding.
[ OK ] Reached target Paths.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
Starting RPC bind service...
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
Starting OpenSSH Server Key Generation...
[ OK ] Started D-Bus System Message Bus.
Starting Login Service...
Starting GSSAPI Proxy Daemon...
Starting Resets System Activity Logs...
Starting LSB: Bring up/down networking...
[ OK ] Started RPC bind service.
Starting Cleanup of Temporary Directories...
[ OK ] Started Resets System Activity Logs.
[ OK ] Started Login Service.
[ OK ] Started GSSAPI Proxy Daemon.
[ OK ] Reached target NFS client services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
[ OK ] Started Cleanup of Temporary Directories.
[ OK ] Started Permit User Sessions.
[ OK ] Started Command Scheduler.
[ OK ] Started OpenSSH Server Key Generation.
[ OK ] Started LSB: Bring up/down networking.
[ OK ] Reached target Network.
Starting OpenSSH server daemon...
Starting /etc/rc.d/rc.local Compatibility...
[ OK ] Reached target Network is Online.
Starting Notify NFS peers of a restart...
[ OK ] Started Notify NFS peers of a restart.
[ OK ] Started /etc/rc.d/rc.local Compatibility.
[ OK ] Started Console Getty.
[ OK ] Reached target Login Prompts.
[ OK ] Started OpenSSH server daemon.
11-11-2019 06:55:07 UTC : : Process id of the program :
11-11-2019 06:55:07 UTC : : #################################################
11-11-2019 06:55:07 UTC : : Starting Grid Installation
11-11-2019 06:55:07 UTC : : #################################################
11-11-2019 06:55:07 UTC : : Pre-Grid Setup steps are in process
11-11-2019 06:55:07 UTC : : Process id of the program :
11-11-2019 06:55:07 UTC : : Disable failed service var-lib-nfs-rpc_pipefs.mount
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
11-11-2019 06:55:07 UTC : : Resetting Failed Services
11-11-2019 06:55:07 UTC : : Sleeping for 60 seconds
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Oracle Linux Server 7.6
Kernel 4.14.35-1902.6.6.el7uek.x86_64 on an x86_64
racnode1 login: 11-11-2019 06:56:07 UTC : : Systemctl state is running!
11-11-2019 06:56:07 UTC : : Setting correct permissions for /bin/ping
11-11-2019 06:56:08 UTC : : Public IP is set to 172.16.1.150
11-11-2019 06:56:08 UTC : : RAC Node PUBLIC Hostname is set to racnode1
11-11-2019 06:56:08 UTC : : racnode1 already exists : 172.16.1.150 racnode1.example.com racnode1
192.168.17.150 racnode1-priv.example.com racnode1-priv
172.16.1.160 racnode1-vip.example.com racnode1-vip, no update required
11-11-2019 06:56:08 UTC : : racnode1-priv already exists : 192.168.17.150 racnode1-priv.example.com racnode1-priv, no update required
11-11-2019 06:56:08 UTC : : racnode1-vip already exists : 172.16.1.160 racnode1-vip.example.com racnode1-vip, no update required
11-11-2019 06:56:08 UTC : : racnode-scan already exists : 172.16.1.70 racnode-scan.example.com racnode-scan, no update required
11-11-2019 06:56:08 UTC : : Preapring Device list
11-11-2019 06:56:08 UTC : : Changing Disk permission and ownership /dev/asm_disk1
11-11-2019 06:56:08 UTC : : DNS_SERVERS is set to empty. /etc/resolv.conf will use default dns docker embedded server.
11-11-2019 06:56:08 UTC : : #####################################################################
11-11-2019 06:56:08 UTC : : RAC setup will begin in 2 minutes
11-11-2019 06:56:08 UTC : : ####################################################################
11-11-2019 06:56:10 UTC : : ###################################################
11-11-2019 06:56:10 UTC : : Pre-Grid Setup steps completed
11-11-2019 06:56:10 UTC : : ###################################################
11-11-2019 06:56:10 UTC : : Checking if grid is already configured
11-11-2019 06:56:10 UTC : : Process id of the program :
11-11-2019 06:56:10 UTC : : Public IP is set to 172.16.1.150
11-11-2019 06:56:10 UTC : : RAC Node PUBLIC Hostname is set to racnode1
11-11-2019 06:56:10 UTC : : Domain is defined to example.com
11-11-2019 06:56:10 UTC : : Default setting of AUTO GNS VIP set to false. If you want to use AUTO GNS VIP, please pass DHCP_CONF as an env parameter set to true
11-11-2019 06:56:10 UTC : : RAC VIP set to 172.16.1.160
11-11-2019 06:56:10 UTC : : RAC Node VIP hostname is set to racnode1-vip
11-11-2019 06:56:10 UTC : : SCAN_NAME name is racnode-scan
11-11-2019 06:56:10 UTC : : SCAN PORT is set to empty string. Setting it to 1521 port.
11-11-2019 06:56:10 UTC : : 172.16.1.70
11-11-2019 06:56:10 UTC : : SCAN Name resolving to IP. Check Passed!
11-11-2019 06:56:11 UTC : : SCAN_IP name is 172.16.1.70
11-11-2019 06:56:11 UTC : : RAC Node PRIV IP is set to 192.168.17.150
11-11-2019 06:56:11 UTC : : RAC Node private hostname is set to racnode1-priv
11-11-2019 06:56:11 UTC : : CMAN_NAME set to the empty string
11-11-2019 06:56:11 UTC : : CMAN_IP set to the empty string
11-11-2019 06:56:11 UTC : : Cluster Name is not defined
11-11-2019 06:56:11 UTC : : Cluster name is set to 'racnode-c'
11-11-2019 06:56:11 UTC : : Password file generated
11-11-2019 06:56:11 UTC : : Common OS Password string is set for Grid user
11-11-2019 06:56:11 UTC : : Common OS Password string is set for Oracle user
11-11-2019 06:56:11 UTC : : Common OS Password string is set for Oracle Database
11-11-2019 06:56:11 UTC : : Setting CONFIGURE_GNS to false
11-11-2019 06:56:11 UTC : : GRID_RESPONSE_FILE env variable set to empty. configGrid.sh will use standard cluster responsefile
11-11-2019 06:56:11 UTC : : Location for User script SCRIPT_ROOT set to /common_scripts
11-11-2019 06:56:11 UTC : : IGNORE_CVU_CHECKS is set to true
11-11-2019 06:56:11 UTC : : Oracle SID is set to ORCLCDB
11-11-2019 06:56:11 UTC : : Oracle PDB name is set to ORCLPDB
11-11-2019 06:56:11 UTC : : Check passed for network card eth1 for public IP 172.16.1.150
11-11-2019 06:56:11 UTC : : Public Netmask : 255.255.255.0
11-11-2019 06:56:11 UTC : : Check passed for network card eth0 for private IP 192.168.17.150
11-11-2019 06:56:11 UTC : : Building NETWORK_STRING to set networkInterfaceList in Grid Response File
11-11-2019 06:56:11 UTC : : Network InterfaceList set to eth1:172.16.1.0:1,eth0:192.168.17.0:5
11-11-2019 06:56:11 UTC : : Setting random password for grid user
11-11-2019 06:56:12 UTC : : Setting random password for oracle user
11-11-2019 06:56:13 UTC : : Calling setupSSH function
11-11-2019 06:56:13 UTC : : SSh will be setup among racnode1 nodes
11-11-2019 06:56:13 UTC : : Running SSH setup for grid user between nodes racnode1
11-11-2019 06:56:52 UTC : : Running SSH setup for oracle user between nodes racnode1
11-11-2019 06:57:00 UTC : : SSH check fine for the racnode1
11-11-2019 06:57:01 UTC : : SSH check fine for the oracle@racnode1
11-11-2019 06:57:01 UTC : : Preapring Device list
11-11-2019 06:57:01 UTC : : Changing Disk permission and ownership
11-11-2019 06:57:01 UTC : : ASM Disk size : 0
11-11-2019 06:57:01 UTC : : ASM Device list will be with failure groups /dev/asm_disk1,
11-11-2019 06:57:01 UTC : : ASM Device list will be groups /dev/asm_disk1
11-11-2019 06:57:01 UTC : : CLUSTER_TYPE env variable is set to STANDALONE, will not process GIMR DEVICE list as default Diskgroup is set to DATA. GIMR DEVICE List will be processed when CLUSTER_TYPE is set to DOMAIN for DSC
11-11-2019 06:57:01 UTC : : Nodes in the cluster racnode1
11-11-2019 06:57:01 UTC : : Setting Device permissions for RAC Install on racnode1
11-11-2019 06:57:01 UTC : : Preapring ASM Device list
11-11-2019 06:57:01 UTC : : Changing Disk permission and ownership
11-11-2019 06:57:01 UTC : : Command : su - $GRID_USER -c "ssh $node sudo chown $GRID_USER:asmadmin $device" execute on racnode1
11-11-2019 06:57:02 UTC : : Command : su - $GRID_USER -c "ssh $node sudo chmod 660 $device" execute on racnode1
11-11-2019 06:57:02 UTC : : Populate Rac Env Vars on Remote Hosts
11-11-2019 06:57:02 UTC : : Command : su - $GRID_USER -c "ssh $node sudo echo \"export ASM_DEVICE_LIST=${ASM_DEVICE_LIST}\" >> /etc/rac_env_vars" execute on racnode1
11-11-2019 06:57:02 UTC : : Generating Reponsefile
11-11-2019 06:57:02 UTC : : Running cluvfy Checks
11-11-2019 06:57:02 UTC : : Performing Cluvfy Checks
11-11-2019 06:58:26 UTC : : Checking /tmp/cluvfy_check.txt if there is any failed check.
ERROR:
PRVG-10467 : The default Oracle Inventory group could not be determined.
Verifying Physical Memory ...FAILED (PRVF-7530)
Verifying Available Physical Memory ...PASSED
Verifying Swap Size ...FAILED (PRVF-7573)
Verifying Free Space: racnode1:/usr,racnode1:/var,racnode1:/etc,racnode1:/sbin,racnode1:/tmp ...PASSED
Verifying User Existence: grid ...
Verifying Users With Same UID: 54332 ...PASSED
Verifying User Existence: grid ...PASSED
Verifying Group Existence: asmadmin ...PASSED
Verifying Group Existence: asmdba ...PASSED
Verifying Group Membership: asmdba ...PASSED
Verifying Group Membership: asmadmin ...PASSED
Verifying Run Level ...PASSED
Verifying Hard Limit: maximum open file descriptors ...PASSED
Verifying Soft Limit: maximum open file descriptors ...PASSED
Verifying Hard Limit: maximum user processes ...PASSED
Verifying Soft Limit: maximum user processes ...PASSED
Verifying Soft Limit: maximum stack size ...PASSED
Verifying Architecture ...PASSED
Verifying OS Kernel Version ...PASSED
Verifying OS Kernel Parameter: semmsl ...PASSED
Verifying OS Kernel Parameter: semmns ...PASSED
Verifying OS Kernel Parameter: semopm ...PASSED
Verifying OS Kernel Parameter: semmni ...PASSED
Verifying OS Kernel Parameter: shmmax ...PASSED
Verifying OS Kernel Parameter: shmmni ...PASSED
Verifying OS Kernel Parameter: shmall ...FAILED (PRVG-1201)
Verifying OS Kernel Parameter: file-max ...PASSED
Verifying OS Kernel Parameter: aio-max-nr ...FAILED (PRVG-1205)
Verifying OS Kernel Parameter: panic_on_oops ...PASSED
Verifying Package: kmod-20-21 (x86_64) ...PASSED
Verifying Package: kmod-libs-20-21 (x86_64) ...PASSED
Verifying Package: binutils-2.23.52.0.1 ...PASSED
Verifying Package: compat-libcap1-1.10 ...PASSED
Verifying Package: libgcc-4.8.2 (x86_64) ...PASSED
Verifying Package: libstdc++-4.8.2 (x86_64) ...PASSED
Verifying Package: libstdc++-devel-4.8.2 (x86_64) ...PASSED
Verifying Package: sysstat-10.1.5 ...PASSED
Verifying Package: ksh ...PASSED
Verifying Package: make-3.82 ...PASSED
Verifying Package: glibc-2.17 (x86_64) ...PASSED
Verifying Package: glibc-devel-2.17 (x86_64) ...PASSED
Verifying Package: libaio-0.3.109 (x86_64) ...PASSED
Verifying Package: libaio-devel-0.3.109 (x86_64) ...PASSED
Verifying Package: nfs-utils-1.2.3-15 ...PASSED
Verifying Package: smartmontools-6.2-4 ...PASSED
Verifying Package: net-tools-2.0-0.17 ...PASSED
Verifying Port Availability for component "Oracle Remote Method Invocation (ORMI)" ...PASSED
Verifying Port Availability for component "Oracle Notification Service (ONS)" ...PASSED
Verifying Port Availability for component "Oracle Cluster Synchronization Services (CSSD)" ...PASSED
Verifying Port Availability for component "Oracle Notification Service (ONS) Enterprise Manager support" ...PASSED
Verifying Port Availability for component "Oracle Database Listener" ...PASSED
Verifying Users With Same UID: 0 ...PASSED
Verifying Current Group ID ...PASSED
Verifying Root user consistency ...PASSED
Verifying Host name ...PASSED
Verifying Node Connectivity ...
Verifying Hosts File ...PASSED
Verifying Check that maximum (MTU) size packet goes through subnet ...PASSED
Verifying Node Connectivity ...PASSED
Verifying Multicast or broadcast check ...PASSED
Verifying ASM Integrity ...PASSED
Verifying Device Checks for ASM ...
Verifying Access Control List check ...PASSED
Verifying Device Checks for ASM ...PASSED
Verifying Network Time Protocol (NTP) ...
Verifying '/etc/ntp.conf' ...PASSED
Verifying Network Time Protocol (NTP) ...FAILED (PRVG-1017)
Verifying Same core file name pattern ...PASSED
Verifying User Mask ...PASSED
Verifying User Not In Group "root": grid ...PASSED
Verifying Time zone consistency ...PASSED
Verifying VIP Subnet configuration check ...PASSED
Verifying resolv.conf Integrity ...FAILED (PRVG-10048)
Verifying DNS/NIS name service ...
Verifying Name Service Switch Configuration File Integrity ...PASSED
Verifying DNS/NIS name service ...FAILED (PRVG-1101)
Verifying Single Client Access Name (SCAN) ...WARNING (PRVG-11368)
Verifying Domain Sockets ...PASSED
Verifying /boot mount ...PASSED
Verifying Daemon "avahi-daemon" not configured and running ...PASSED
Verifying Daemon "proxyt" not configured and running ...PASSED
Verifying loopback network interface address ...PASSED
Verifying Oracle base: /u01/app/grid ...
Verifying '/u01/app/grid' ...PASSED
Verifying Oracle base: /u01/app/grid ...PASSED
Verifying User Equivalence ...PASSED
Verifying RPM Package Manager database ...INFORMATION (PRVG-11250)
Verifying Network interface bonding status of private interconnect network interfaces ...PASSED
Verifying /dev/shm mounted as temporary file system ...PASSED
Verifying File system mount options for path /var ...PASSED
Verifying DefaultTasksMax parameter ...PASSED
Verifying zeroconf check ...PASSED
Verifying ASM Filter Driver configuration ...PASSED
Verifying Systemd login manager IPC parameter ...PASSED
Verifying Access control attributes for cluster manifest file ...PASSED
Pre-check for cluster services setup was unsuccessful on all the nodes.
Failures were encountered during execution of CVU verification request "stage -pre crsinst".
Verifying Physical Memory ...FAILED
racnode1: PRVF-7530 : Sufficient physical memory is not available on node
"racnode1" [Required physical memory = 8GB (8388608.0KB)]
Verifying Swap Size ...FAILED
racnode1: PRVF-7573 : Sufficient swap size is not available on node "racnode1"
[Required = 7.5283GB (7893968.0KB) ; Found = 4GB (4194300.0KB)]
Verifying OS Kernel Parameter: shmall ...FAILED
racnode1: PRVG-1201 : OS kernel parameter "shmall" does not have expected
configured value on node "racnode1" [Expected = "2251799813685247" ;
Current = "18446744073692774000"; Configured = "1073741824"].
Verifying OS Kernel Parameter: aio-max-nr ...FAILED
racnode1: PRVG-1205 : OS kernel parameter "aio-max-nr" does not have expected
current value on node "racnode1" [Expected = "1048576" ; Current =
"65536"; Configured = "1048576"].
Verifying Network Time Protocol (NTP) ...FAILED
racnode1: PRVG-1017 : NTP configuration file "/etc/ntp.conf" is present on
nodes "racnode1" on which NTP daemon or service was not running
Verifying resolv.conf Integrity ...FAILED
racnode1: PRVG-10048 : Name "racnode1" was not resolved to an address of the
specified type by name servers "127.0.0.11".
Verifying DNS/NIS name service ...FAILED
PRVG-1101 : SCAN name "racnode-scan" failed to resolve
Verifying Single Client Access Name (SCAN) ...WARNING
racnode1: PRVG-11368 : A SCAN is recommended to resolve to "3" or more IP
addresses, but SCAN "racnode-scan" resolves to only "172.16.1.70"
Verifying RPM Package Manager database ...INFORMATION
PRVG-11250 : The check "RPM Package Manager database" was not performed because
it needs 'root' user privileges.
CVU operation performed: stage -pre crsinst
Date: Nov 11, 2019 6:57:15 AM
CVU home: /u01/app/19.3.0/grid/
User: grid
11-11-2019 06:58:27 UTC : : CVU Checks are ignored as IGNORE_CVU_CHECKS set to true. It is recommended to set IGNORE_CVU_CHECKS to false and meet all the cvu checks requirement. RAC installation might fail, if there are failed cvu checks.
11-11-2019 06:58:27 UTC : : Running Grid Installation
11-11-2019 07:00:07 UTC : : Running root.sh
11-11-2019 07:00:07 UTC : : Nodes in the cluster racnode1
11-11-2019 07:00:07 UTC : : Running root.sh on racnode1
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directoryFailed to parse kernel command line, ignoring: No such file or directoryFailed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directoryFailed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
11-11-2019 07:27:11 UTC : : Running post root.sh steps
11-11-2019 07:27:12 UTC : : Running post root.sh steps to setup Grid env
11-11-2019 07:33:02 UTC : : Checking Cluster Status
11-11-2019 07:33:02 UTC : : Nodes in the cluster
11-11-2019 07:33:02 UTC : : Removing /tmp/cluvfy_check.txt as cluster check has passed
11-11-2019 07:33:02 UTC : : Running User Script for grid user
11-11-2019 07:33:04 UTC : : Generating DB Responsefile Running DB creation
11-11-2019 07:33:04 UTC : : Running DB creation
11-11-2019 08:39:01 UTC : : Checking DB status
11-11-2019 08:39:10 UTC : : #################################################################
11-11-2019 08:39:10 UTC : : Oracle Database ORCLCDB is up and running on racnode1
11-11-2019 08:39:10 UTC : : #################################################################
11-11-2019 08:39:10 UTC : : Running User Script oracle user
11-11-2019 08:39:13 UTC : : Setting Remote Listener
11-11-2019 08:39:20 UTC : : ####################################
11-11-2019 08:39:20 UTC : : ORACLE RAC DATABASE IS READY TO USE!
11-11-2019 08:39:20 UTC : : ####################################注意最后3行，即表示已成功完成：
登录到容器内部确认GI和数据库均正常：
[grid@racnode1 ~]$ crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[grid@racnode1 ~]$ asmcmd lsdg
State Type Rebal Sector Logical_Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 512 4096 4194304 51200 47000 0 47000 0 Y DATA/
[grid@racnode1 ~]$ export ORACLE_HOME=/u01/app/19.3.0/grid
[grid@racnode1 ~]$ lsnrctl status
LSNRCTL for Linux: Version 19.0.0.0.0 - Production on 12-NOV-2019 12:10:31
Copyright (c) 1991, 2019, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 19.0.0.0.0 - Production
Start Date 12-NOV-2019 12:04:52
Uptime 0 days 0 hr. 5 min. 38 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/19.3.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/racnode1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.1.150)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.1.160)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=racnode1.example.com)(PORT=5500))(Security=(my_wallet_directory=/u01/app/oracle/product/19.3.0/dbhome_1/admin/ORCLCDB/xdb_wallet))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "+ASM_DATA" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "970f09422a5234d2e053960110ac7965" has 1 instance(s).
Instance "ORCLCDB1", status READY, has 1 handler(s) for this service...
Service "ORCLCDB" has 1 instance(s).
Instance "ORCLCDB1", status READY, has 1 handler(s) for this service...
Service "ORCLCDBXDB" has 1 instance(s).
Instance "ORCLCDB1", status READY, has 1 handler(s) for this service...
Service "orclpdb" has 1 instance(s).
Instance "ORCLCDB1", status READY, has 1 handler(s) for this service...
The command completed successfully
[grid@racnode1 ~]$ sudo -s
bash-4.2# su - oracle
[oracle@racnode1 ~]$ export ORACLE_HOME=/u01/app/oracle/product/19.3.0/dbhome_1/
[oracle@racnode1 admin]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/19.3.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCLCDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = racnode-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCLCDB)
)
)
[oracle@racnode1 admin]$ sqlplus sys/Oracle.123#@ORCLCDB as sysdba
SQL*Plus: Release 19.0.0.0.0 - Production on Tue Nov 12 12:13:30 2019
Version 19.3.0.0.0
Copyright (c) 1982, 2019, Oracle. All rights reserved.
Connected to:
Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0
SQL> select instance_name from v$instance;
INSTANCE_NAME
----------------
ORCLCDB1
SQL> select name from v$database;
NAME
---------
ORCLCDB
SQL> exit
Disconnected from Oracle Database 19c Enterprise Edition Release 19.0.0.0.0 - Production
Version 19.3.0.0.0
添加第二个RAC节点
首先创建容器racnode2:
docker create -t -i \
--hostname racnode2 \
--volume /dev/shm \
--tmpfs /dev/shm:rw,exec,size=4G \
--volume /boot:/boot:ro \
--dns-search=example.com \
--volume /opt/containers/rac_host_file:/etc/hosts \
--volume /opt/.secrets:/run/secrets \
--device=/dev/sdc:/dev/asm_disk1 \
--privileged=false \
--cap-add=SYS_NICE \
--cap-add=SYS_RESOURCE \
--cap-add=NET_ADMIN \
-e EXISTING_CLS_NODES=racnode1 \
-e NODE_VIP=172.16.1.161 \
-e VIP_HOSTNAME=racnode2-vip \
-e PRIV_IP=192.168.17.151 \
-e PRIV_HOSTNAME=racnode2-priv \
-e PUBLIC_IP=172.16.1.151 \
-e PUBLIC_HOSTNAME=racnode2 \
-e DOMAIN=example.com \
-e SCAN_NAME=racnode-scan \
-e SCAN_IP=172.16.1.70 \
-e ASM_DISCOVERY_DIR=/dev \
-e ASM_DEVICE_LIST=/dev/asm_disk1 \
-e ORACLE_SID=ORCLCDB \
-e OP_TYPE=ADDNODE \
-e COMMON_OS_PWD_FILE=common_os_pwdfile.enc \
-e PWD_KEY=pwd.key \
--tmpfs=/run -v /sys/fs/cgroup:/sys/fs/cgroup:ro \
--cpu-rt-runtime=95000 \
--ulimit rtprio=99 \
--restart=always \
--name racnode2 \
oracle/database-rac:19.3.0为第二个容器分配网络：
docker network disconnect bridge racnode2
docker network connect rac_pub1_nw --ip 172.16.1.151 racnode2
docker network connect rac_priv1_nw --ip 192.168.17.151 racnode2启动第二个容器：
docker start racnode2查看日志：
docker logs -f racnode2日志如下：
[vagrant@ol7-vagrant-rac ~]$ docker logs -f racnode2
PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=racnode2
TERM=xterm
EXISTING_CLS_NODES=racnode1
NODE_VIP=172.16.1.161
VIP_HOSTNAME=racnode2-vip
PRIV_IP=192.168.17.151
PRIV_HOSTNAME=racnode2-priv
PUBLIC_IP=172.16.1.151
PUBLIC_HOSTNAME=racnode2
DOMAIN=example.com
SCAN_NAME=racnode-scan
SCAN_IP=172.16.1.70
ASM_DISCOVERY_DIR=/dev
ASM_DEVICE_LIST=/dev/asm_disk1
ORACLE_SID=ORCLCDB
OP_TYPE=ADDNODE
COMMON_OS_PWD_FILE=common_os_pwdfile.enc
PWD_KEY=pwd.key
SETUP_LINUX_FILE=setupLinuxEnv.sh
INSTALL_DIR=/opt/scripts
GRID_BASE=/u01/app/grid
GRID_HOME=/u01/app/19.3.0/grid
INSTALL_FILE_1=LINUX.X64_193000_grid_home.zip
GRID_INSTALL_RSP=gridsetup_19c.rsp
GRID_SW_INSTALL_RSP=grid_sw_install_19c.rsp
GRID_SETUP_FILE=setupGrid.sh
FIXUP_PREQ_FILE=fixupPreq.sh
INSTALL_GRID_BINARIES_FILE=installGridBinaries.sh
INSTALL_GRID_PATCH=applyGridPatch.sh
INVENTORY=/u01/app/oraInventory
CONFIGGRID=configGrid.sh
ADDNODE=AddNode.sh
DELNODE=DelNode.sh
ADDNODE_RSP=grid_addnode.rsp
SETUPSSH=setupSSH.expect
DOCKERORACLEINIT=dockeroracleinit
GRID_USER_HOME=/home/grid
SETUPGRIDENV=setupGridEnv.sh
RESET_OS_PASSWORD=resetOSPassword.sh
MULTI_NODE_INSTALL=MultiNodeInstall.py
DB_BASE=/u01/app/oracle
DB_HOME=/u01/app/oracle/product/19.3.0/dbhome_1
INSTALL_FILE_2=LINUX.X64_193000_db_home.zip
DB_INSTALL_RSP=db_sw_install_19c.rsp
DBCA_RSP=dbca_19c.rsp
DB_SETUP_FILE=setupDB.sh
PWD_FILE=setPassword.sh
RUN_FILE=runOracle.sh
STOP_FILE=stopOracle.sh
ENABLE_RAC_FILE=enableRAC.sh
CHECK_DB_FILE=checkDBStatus.sh
USER_SCRIPTS_FILE=runUserScripts.sh
REMOTE_LISTENER_FILE=remoteListener.sh
INSTALL_DB_BINARIES_FILE=installDBBinaries.sh
GRID_HOME_CLEANUP=GridHomeCleanup.sh
ORACLE_HOME_CLEANUP=OracleHomeCleanup.sh
DB_USER=oracle
GRID_USER=grid
FUNCTIONS=functions.sh
COMMON_SCRIPTS=/common_scripts
CHECK_SPACE_FILE=checkSpace.sh
RESET_FAILED_UNITS=resetFailedUnits.sh
SET_CRONTAB=setCrontab.sh
CRONTAB_ENTRY=crontabEntry
EXPECT=/usr/bin/expect
BIN=/usr/sbin
container=true
INSTALL_SCRIPTS=/opt/scripts/install
SCRIPT_DIR=/opt/scripts/startup
GRID_PATH=/u01/app/19.3.0/grid/bin:/u01/app/19.3.0/grid/OPatch/:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
DB_PATH=/u01/app/oracle/product/19.3.0/dbhome_1/bin:/u01/app/oracle/product/19.3.0/dbhome_1/OPatch/:/usr/sbin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
GRID_LD_LIBRARY_PATH=/u01/app/19.3.0/grid/lib:/usr/lib:/lib
DB_LD_LIBRARY_PATH=/u01/app/oracle/product/19.3.0/dbhome_1/lib:/usr/lib:/lib
HOME=/home/grid
Failed to parse kernel command line, ignoring: No such file or directory
systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
Detected virtualization other.
Detected architecture x86-64.
Welcome to Oracle Linux Server 7.6!
Set hostname to <racnode2>.
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
/usr/lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
Failed to parse kernel command line, ignoring: No such file or directory
Binding to IPv6 address not available since kernel does not support IPv6.
Binding to IPv6 address not available since kernel does not support IPv6.
Cannot add dependency job for unit display-manager.service, ignoring: Unit not found.
[ OK ] Created slice Root Slice.
[ OK ] Listening on Journal Socket.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
Starting Journal Service...
Starting Read and set NIS domainname from /etc/sysconfig/network...
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
Starting Configure read-only root support...
Starting Rebuild Hardware Database...
[ OK ] Reached target Local File Systems (Pre).
Couldn't determine result for ConditionKernelCommandLine=|rd.modules-load for systemd-modules-load.service, assuming failed: No such file or directory
Couldn't determine result for ConditionKernelCommandLine=|modules-load for systemd-modules-load.service, assuming failed: No such file or directory
[ OK ] Started Journal Service.
[ OK ] Started Read and set NIS domainname from /etc/sysconfig/network.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Configure read-only root support.
[ OK ] Reached target Local File Systems.
Starting Rebuild Journal Catalog...
Starting Preprocess NFS configuration...
Starting Mark the need to relabel after reboot...
Starting Load/Save Random Seed...
[ OK ] Started Mark the need to relabel after reboot.
[ OK ] Started Preprocess NFS configuration.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Mounting RPC Pipe File System...
Starting Update UTMP about System Boot/Shutdown...
[FAILED] Failed to mount RPC Pipe File System.
See 'systemctl status var-lib-nfs-rpc_pipefs.mount' for details.
[DEPEND] Dependency failed for rpc_pipefs.target.
[DEPEND] Dependency failed for RPC security service for NFS client and server.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Rebuild Journal Catalog.
[ OK ] Started Rebuild Hardware Database.
Starting Update is Completed...
[ OK ] Started Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Flexible branding.
[ OK ] Reached target Paths.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Reached target Sockets.
Starting RPC bind service...
[ OK ] Reached target Basic System.
Starting OpenSSH Server Key Generation...
Starting LSB: Bring up/down networking...
Starting GSSAPI Proxy Daemon...
[ OK ] Started D-Bus System Message Bus.
Starting Resets System Activity Logs...
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
Starting Login Service...
[ OK ] Started RPC bind service.
Starting Cleanup of Temporary Directories...
[ OK ] Started GSSAPI Proxy Daemon.
[ OK ] Reached target NFS client services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
[ OK ] Started Command Scheduler.
[ OK ] Started Resets System Activity Logs.
[ OK ] Started Login Service.
[ OK ] Started Cleanup of Temporary Directories.
[ OK ] Started OpenSSH Server Key Generation.
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Started LSB: Bring up/down networking.
[ OK ] Reached target Network.
Starting /etc/rc.d/rc.local Compatibility...
Starting OpenSSH server daemon...
[ OK ] Reached target Network is Online.
Starting Notify NFS peers of a restart...
[ OK ] Started /etc/rc.d/rc.local Compatibility.
[ OK ] Started Console Getty.
[ OK ] Reached target Login Prompts.
[ OK ] Started Notify NFS peers of a restart.
[ OK ] Started OpenSSH server daemon.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
11-12-2019 12:21:28 UTC : : Process id of the program :
11-12-2019 12:21:28 UTC : : #################################################
11-12-2019 12:21:28 UTC : : Starting Grid Installation
11-12-2019 12:21:28 UTC : : #################################################
11-12-2019 12:21:28 UTC : : Pre-Grid Setup steps are in process
11-12-2019 12:21:28 UTC : : Process id of the program :
11-12-2019 12:21:28 UTC : : Disable failed service var-lib-nfs-rpc_pipefs.mount
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
11-12-2019 12:21:28 UTC : : Resetting Failed Services
11-12-2019 12:21:28 UTC : : Sleeping for 60 seconds
Oracle Linux Server 7.6
Kernel 4.14.35-1902.6.6.el7uek.x86_64 on an x86_64
racnode2 login: 11-12-2019 12:22:28 UTC : : Systemctl state is running!
11-12-2019 12:22:28 UTC : : Setting correct permissions for /bin/ping
11-12-2019 12:22:28 UTC : : Public IP is set to 172.16.1.151
11-12-2019 12:22:28 UTC : : RAC Node PUBLIC Hostname is set to racnode2
11-12-2019 12:22:28 UTC : : Preparing host line for racnode2
11-12-2019 12:22:28 UTC : : Adding \n172.16.1.151\tracnode2.example.com\tracnode2 to /etc/hosts
11-12-2019 12:22:28 UTC : : Preparing host line for racnode2-priv
11-12-2019 12:22:28 UTC : : Adding \n192.168.17.151\tracnode2-priv.example.com\tracnode2-priv to /etc/hosts
11-12-2019 12:22:28 UTC : : Preparing host line for racnode2-vip
11-12-2019 12:22:28 UTC : : Adding \n172.16.1.161\tracnode2-vip.example.com\tracnode2-vip to /etc/hosts
11-12-2019 12:22:28 UTC : : racnode-scan already exists : 172.16.1.70 racnode-scan.example.com racnode-scan, no update required
11-12-2019 12:22:28 UTC : : Preapring Device list
11-12-2019 12:22:28 UTC : : Changing Disk permission and ownership /dev/asm_disk1
11-12-2019 12:22:28 UTC : : DNS_SERVERS is set to empty. /etc/resolv.conf will use default dns docker embedded server.
11-12-2019 12:22:28 UTC : : #####################################################################
11-12-2019 12:22:28 UTC : : RAC setup will begin in 2 minutes
11-12-2019 12:22:28 UTC : : ####################################################################
11-12-2019 12:22:30 UTC : : ###################################################
11-12-2019 12:22:30 UTC : : Pre-Grid Setup steps completed
11-12-2019 12:22:30 UTC : : ###################################################
11-12-2019 12:22:30 UTC : : Checking if grid is already configured
11-12-2019 12:22:31 UTC : : Public IP is set to 172.16.1.151
11-12-2019 12:22:31 UTC : : RAC Node PUBLIC Hostname is set to racnode2
11-12-2019 12:22:31 UTC : : Domain is defined to example.com
11-12-2019 12:22:31 UTC : : Setting Existing Cluster Node for node addition operation. This will be retrieved from racnode1
11-12-2019 12:22:31 UTC : : Existing Node Name of the cluster is set to racnode1
11-12-2019 12:22:31 UTC : : 172.16.1.150
11-12-2019 12:22:31 UTC : : Existing Cluster node resolved to IP. Check passed
11-12-2019 12:22:31 UTC : : Default setting of AUTO GNS VIP set to false. If you want to use AUTO GNS VIP, please pass DHCP_CONF as an env parameter set to true
11-12-2019 12:22:31 UTC : : RAC VIP set to 172.16.1.161
11-12-2019 12:22:31 UTC : : RAC Node VIP hostname is set to racnode2-vip
11-12-2019 12:22:31 UTC : : SCAN_NAME name is racnode-scan
11-12-2019 12:22:31 UTC : : 172.16.1.70
11-12-2019 12:22:31 UTC : : SCAN Name resolving to IP. Check Passed!
11-12-2019 12:22:31 UTC : : SCAN_IP name is 172.16.1.70
11-12-2019 12:22:31 UTC : : RAC Node PRIV IP is set to 192.168.17.151
11-12-2019 12:22:31 UTC : : RAC Node private hostname is set to racnode2-priv
11-12-2019 12:22:31 UTC : : CMAN_NAME set to the empty string
11-12-2019 12:22:31 UTC : : CMAN_IP set to the empty string
11-12-2019 12:22:31 UTC : : Password file generated
11-12-2019 12:22:31 UTC : : Common OS Password string is set for Grid user
11-12-2019 12:22:31 UTC : : Common OS Password string is set for Oracle user
11-12-2019 12:22:31 UTC : : GRID_RESPONSE_FILE env variable set to empty. AddNode.sh will use standard cluster responsefile
11-12-2019 12:22:31 UTC : : Location for User script SCRIPT_ROOT set to /common_scripts
11-12-2019 12:22:31 UTC : : ORACLE_SID is set to ORCLCDB
11-12-2019 12:22:31 UTC : : Setting random password for root/grid/oracle user
11-12-2019 12:22:31 UTC : : Setting random password for grid user
11-12-2019 12:22:32 UTC : : Setting random password for oracle user
11-12-2019 12:22:32 UTC : : Setting random password for root user
11-12-2019 12:22:32 UTC : : Cluster Nodes are racnode1 racnode2
11-12-2019 12:22:32 UTC : : Running SSH setup for grid user between nodes racnode1 racnode2
11-12-2019 12:22:45 UTC : : Running SSH setup for oracle user between nodes racnode1 racnode2
11-12-2019 12:23:00 UTC : : SSH check fine for the racnode1
11-12-2019 12:23:00 UTC : : SSH check fine for the racnode2
11-12-2019 12:23:00 UTC : : SSH check fine for the racnode2
11-12-2019 12:23:00 UTC : : SSH check fine for the oracle@racnode1
11-12-2019 12:23:01 UTC : : SSH check fine for the oracle@racnode2
11-12-2019 12:23:01 UTC : : SSH check fine for the oracle@racnode2
11-12-2019 12:23:01 UTC : : Setting Device permission to grid and asmadmin on all the cluster nodes
11-12-2019 12:23:01 UTC : : Nodes in the cluster racnode2
11-12-2019 12:23:01 UTC : : Setting Device permissions for RAC Install on racnode2
11-12-2019 12:23:01 UTC : : Preapring ASM Device list
11-12-2019 12:23:01 UTC : : Changing Disk permission and ownership
11-12-2019 12:23:01 UTC : : Command : su - $GRID_USER -c "ssh $node sudo chown $GRID_USER:asmadmin $device" execute on racnode2
11-12-2019 12:23:01 UTC : : Command : su - $GRID_USER -c "ssh $node sudo chmod 660 $device" execute on racnode2
11-12-2019 12:23:01 UTC : : Populate Rac Env Vars on Remote Hosts
11-12-2019 12:23:01 UTC : : Command : su - $GRID_USER -c "ssh $node sudo echo \"export ASM_DEVICE_LIST=${ASM_DEVICE_LIST}\" >> /etc/rac_env_vars" execute on racnode2
11-12-2019 12:23:02 UTC : : Checking Cluster Status on racnode1
11-12-2019 12:23:02 UTC : : Checking Cluster
11-12-2019 12:23:02 UTC : : Cluster Check on remote node passed
11-12-2019 12:23:02 UTC : : Cluster Check went fine
11-12-2019 12:23:03 UTC : : CRSD Check went fine
11-12-2019 12:23:03 UTC : : CSSD Check went fine
11-12-2019 12:23:04 UTC : : EVMD Check went fine
11-12-2019 12:23:04 UTC : : Generating Responsefile for node addition
11-12-2019 12:23:04 UTC : : Clustered Nodes are set to racnode2:racnode2-vip:HUB
11-12-2019 12:23:04 UTC : : Running Cluster verification utility for new node racnode2 on racnode1
11-12-2019 12:23:04 UTC : : Nodes in the cluster racnode2
11-12-2019 12:23:04 UTC : : ssh to the node racnode1 and executing cvu checks on racnode2
11-12-2019 12:24:33 UTC : : Checking /tmp/cluvfy_check.txt if there is any failed check.
Verifying Physical Memory ...PASSED
Verifying Available Physical Memory ...PASSED
Verifying Swap Size ...FAILED (PRVF-7573)
Verifying Free Space: racnode2:/usr,racnode2:/var,racnode2:/etc,racnode2:/u01/app/19.3.0/grid,racnode2:/sbin,racnode2:/tmp ...PASSED
Verifying Free Space: racnode1:/usr,racnode1:/var,racnode1:/etc,racnode1:/u01/app/19.3.0/grid,racnode1:/sbin,racnode1:/tmp ...PASSED
Verifying User Existence: oracle ...
Verifying Users With Same UID: 54321 ...PASSED
Verifying User Existence: oracle ...PASSED
Verifying User Existence: grid ...
Verifying Users With Same UID: 54332 ...PASSED
Verifying User Existence: grid ...PASSED
Verifying User Existence: root ...
Verifying Users With Same UID: 0 ...PASSED
Verifying User Existence: root ...PASSED
Verifying Group Existence: asmadmin ...PASSED
Verifying Group Existence: asmoper ...PASSED
Verifying Group Existence: asmdba ...PASSED
Verifying Group Existence: oinstall ...PASSED
Verifying Group Membership: oinstall ...PASSED
Verifying Group Membership: asmdba ...PASSED
Verifying Group Membership: asmadmin ...PASSED
Verifying Group Membership: asmoper ...PASSED
Verifying Run Level ...PASSED
Verifying Hard Limit: maximum open file descriptors ...PASSED
Verifying Soft Limit: maximum open file descriptors ...PASSED
Verifying Hard Limit: maximum user processes ...PASSED
Verifying Soft Limit: maximum user processes ...PASSED
Verifying Soft Limit: maximum stack size ...PASSED
Verifying Architecture ...PASSED
Verifying OS Kernel Version ...PASSED
Verifying OS Kernel Parameter: semmsl ...PASSED
Verifying OS Kernel Parameter: semmns ...PASSED
Verifying OS Kernel Parameter: semopm ...PASSED
Verifying OS Kernel Parameter: semmni ...PASSED
Verifying OS Kernel Parameter: shmmax ...PASSED
Verifying OS Kernel Parameter: shmmni ...PASSED
Verifying OS Kernel Parameter: shmall ...FAILED (PRVG-1201)
Verifying OS Kernel Parameter: file-max ...PASSED
Verifying OS Kernel Parameter: aio-max-nr ...FAILED (PRVG-1205)
Verifying OS Kernel Parameter: panic_on_oops ...PASSED
Verifying Package: kmod-20-21 (x86_64) ...PASSED
Verifying Package: kmod-libs-20-21 (x86_64) ...PASSED
Verifying Package: binutils-2.23.52.0.1 ...PASSED
Verifying Package: compat-libcap1-1.10 ...PASSED
Verifying Package: libgcc-4.8.2 (x86_64) ...PASSED
Verifying Package: libstdc++-4.8.2 (x86_64) ...PASSED
Verifying Package: libstdc++-devel-4.8.2 (x86_64) ...PASSED
Verifying Package: sysstat-10.1.5 ...PASSED
Verifying Package: ksh ...PASSED
Verifying Package: make-3.82 ...PASSED
Verifying Package: glibc-2.17 (x86_64) ...PASSED
Verifying Package: glibc-devel-2.17 (x86_64) ...PASSED
Verifying Package: libaio-0.3.109 (x86_64) ...PASSED
Verifying Package: libaio-devel-0.3.109 (x86_64) ...PASSED
Verifying Package: nfs-utils-1.2.3-15 ...PASSED
Verifying Package: smartmontools-6.2-4 ...PASSED
Verifying Package: net-tools-2.0-0.17 ...PASSED
Verifying Users With Same UID: 0 ...PASSED
Verifying Current Group ID ...PASSED
Verifying Root user consistency ...PASSED
Verifying Node Addition ...
Verifying CRS Integrity ...PASSED
Verifying Clusterware Version Consistency ...PASSED
Verifying '/u01/app/19.3.0/grid' ...PASSED
Verifying Node Addition ...PASSED
Verifying Host name ...PASSED
Verifying Node Connectivity ...
Verifying Hosts File ...PASSED
Verifying Check that maximum (MTU) size packet goes through subnet ...PASSED
Verifying subnet mask consistency for subnet "172.16.1.0" ...PASSED
Verifying subnet mask consistency for subnet "192.168.17.0" ...PASSED
Verifying Node Connectivity ...PASSED
Verifying Multicast or broadcast check ...PASSED
Verifying ASM Integrity ...PASSED
Verifying Device Checks for ASM ...
Verifying Access Control List check ...PASSED
Verifying Device Checks for ASM ...PASSED
Verifying Database home availability ...PASSED
Verifying OCR Integrity ...PASSED
Verifying Time zone consistency ...PASSED
Verifying Network Time Protocol (NTP) ...
Verifying '/etc/ntp.conf' ...PASSED
Verifying '/var/run/ntpd.pid' ...PASSED
Verifying '/var/run/chronyd.pid' ...PASSED
Verifying Network Time Protocol (NTP) ...FAILED (PRVG-1017)
Verifying User Not In Group "root": grid ...PASSED
Verifying Time offset between nodes ...PASSED
Verifying resolv.conf Integrity ...FAILED (PRVG-10048)
Verifying DNS/NIS name service ...PASSED
Verifying User Equivalence ...PASSED
Verifying /dev/shm mounted as temporary file system ...PASSED
Verifying /boot mount ...PASSED
Verifying zeroconf check ...PASSED
Pre-check for node addition was unsuccessful on all the nodes.
Failures were encountered during execution of CVU verification request "stage -pre nodeadd".
Verifying Swap Size ...FAILED
racnode2: PRVF-7573 : Sufficient swap size is not available on node "racnode2"
[Required = 9.497GB (9958344.0KB) ; Found = 4GB (4194300.0KB)]
racnode1: PRVF-7573 : Sufficient swap size is not available on node "racnode1"
[Required = 9.497GB (9958344.0KB) ; Found = 4GB (4194300.0KB)]
Verifying OS Kernel Parameter: shmall ...FAILED
racnode2: PRVG-1201 : OS kernel parameter "shmall" does not have expected
configured value on node "racnode2" [Expected = "2251799813685247" ;
Current = "18446744073692774000"; Configured = "1073741824"].
racnode1: PRVG-1201 : OS kernel parameter "shmall" does not have expected
configured value on node "racnode1" [Expected = "2251799813685247" ;
Current = "18446744073692774000"; Configured = "1073741824"].
Verifying OS Kernel Parameter: aio-max-nr ...FAILED
racnode2: PRVG-1205 : OS kernel parameter "aio-max-nr" does not have expected
current value on node "racnode2" [Expected = "1048576" ; Current =
"65536"; Configured = "1048576"].
racnode1: PRVG-1205 : OS kernel parameter "aio-max-nr" does not have expected
current value on node "racnode1" [Expected = "1048576" ; Current =
"65536"; Configured = "1048576"].
Verifying Network Time Protocol (NTP) ...FAILED
racnode2: PRVG-1017 : NTP configuration file "/etc/ntp.conf" is present on
nodes "racnode2,racnode1" on which NTP daemon or service was not
running
racnode1: PRVG-1017 : NTP configuration file "/etc/ntp.conf" is present on
nodes "racnode2,racnode1" on which NTP daemon or service was not
running
Verifying resolv.conf Integrity ...FAILED
racnode2: PRVG-10048 : Name "racnode2" was not resolved to an address of the
specified type by name servers "127.0.0.11".
racnode1: PRVG-10048 : Name "racnode1" was not resolved to an address of the
specified type by name servers "127.0.0.11".
CVU operation performed: stage -pre nodeadd
Date: Nov 12, 2019 12:23:09 PM
CVU home: /u01/app/19.3.0/grid/
User: grid
11-12-2019 12:24:33 UTC : : CVU Checks are ignored as IGNORE_CVU_CHECKS set to true. It is recommended to set IGNORE_CVU_CHECKS to false and meet all the cvu checks requirement. RAC installation might fail, if there are failed cvu checks.
11-12-2019 12:24:33 UTC : : Running Node Addition and cluvfy test for node racnode2
11-12-2019 12:24:33 UTC : : Copying /tmp/grid_addnode.rsp on remote node racnode1
11-12-2019 12:24:33 UTC : : Running GridSetup.sh on racnode1 to add the node to existing cluster
11-12-2019 12:26:08 UTC : : Node Addition performed. removing Responsefile
11-12-2019 12:26:08 UTC : : Running root.sh on node racnode2
11-12-2019 12:26:08 UTC : : Nodes in the cluster racnode2
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
Failed to parse kernel command line, ignoring: No such file or directory
11-12-2019 12:36:37 UTC : : Checking Cluster
11-12-2019 12:36:38 UTC : : Cluster Check passed
11-12-2019 12:36:38 UTC : : Cluster Check went fine
11-12-2019 12:36:39 UTC : : CRSD Check went fine
11-12-2019 12:36:39 UTC : : CSSD Check went fine
11-12-2019 12:36:39 UTC : : EVMD Check went fine
11-12-2019 12:36:39 UTC : : Removing /tmp/cluvfy_check.txt as cluster check has passed
11-12-2019 12:36:39 UTC : : Checking Cluster Class
11-12-2019 12:36:39 UTC : : Checking Cluster Class
11-12-2019 12:36:40 UTC : : Cluster class is CRS-41008: Cluster class is 'Standalone Cluster'
11-12-2019 12:36:40 UTC : : Running User Script for grid user
11-12-2019 12:36:40 UTC : : Performing DB Node addition
11-12-2019 12:38:05 UTC : : Node Addition went fine for racnode2
11-12-2019 12:38:05 UTC : : Running root.sh
11-12-2019 12:38:05 UTC : : Nodes in the cluster racnode2
11-12-2019 12:38:09 UTC : : Adding DB Instance
11-12-2019 12:38:09 UTC : : Adding DB Instance on racnode1
11-12-2019 12:45:49 UTC : : Checking DB status
11-12-2019 12:46:51 UTC : : ORCLCDB is not up and running on racnode2
11-12-2019 12:46:52 UTC : : Error has occurred in Grid Setup, Please verify!
从日志中可知，数据库启动没有成功，也许是资源的原因。
重启racnode2容器，然后就正常了：
docker stop racnode2
docker start racnode2查看日志，以下为最后部分日志：
11-12-2019 13:06:54 UTC : : Setting correct permissions for /bin/ping
11-12-2019 13:06:54 UTC : : Public IP is set to 172.16.1.151
11-12-2019 13:06:54 UTC : : RAC Node PUBLIC Hostname is set to racnode2
11-12-2019 13:06:54 UTC : : racnode2 already exists : 172.16.1.151 racnode2.example.com racnode2
192.168.17.151 racnode2-priv.example.com racnode2-priv
172.16.1.161 racnode2-vip.example.com racnode2-vip, no update required
11-12-2019 13:06:54 UTC : : racnode2-priv already exists : 192.168.17.151 racnode2-priv.example.com racnode2-priv, no update required
11-12-2019 13:06:54 UTC : : racnode2-vip already exists : 172.16.1.161 racnode2-vip.example.com racnode2-vip, no update required
11-12-2019 13:06:54 UTC : : racnode-scan already exists : 172.16.1.70 racnode-scan.example.com racnode-scan, no update required
11-12-2019 13:06:54 UTC : : Preapring Device list
11-12-2019 13:06:54 UTC : : Changing Disk permission and ownership /dev/asm_disk1
11-12-2019 13:06:54 UTC : : DNS_SERVERS is set to empty. /etc/resolv.conf will use default dns docker embedded server.
11-12-2019 13:06:54 UTC : : #####################################################################
11-12-2019 13:06:54 UTC : : RAC setup will begin in 2 minutes
11-12-2019 13:06:54 UTC : : ####################################################################
11-12-2019 13:06:56 UTC : : ###################################################
11-12-2019 13:06:56 UTC : : Pre-Grid Setup steps completed
11-12-2019 13:06:56 UTC : : ###################################################
11-12-2019 13:06:56 UTC : : Checking if grid is already configured
11-12-2019 13:06:56 UTC : : Grid is installed on racnode2. runOracle.sh will start the Grid service
11-12-2019 13:06:56 UTC : : Setting up Grid Env for Grid Start
11-12-2019 13:06:56 UTC : : ##########################################################################################
11-12-2019 13:06:56 UTC : : Grid is already installed on this container! Grid will be started by default ohasd scripts
11-12-2019 13:06:56 UTC : : ############################################################################################
检查，可以看到所有资源正常：
[grid@racnode2 ~]$ crsctl status resource
NAME=ora.ASMNET1LSNR_ASM.lsnr(ora.asmgroup)
TYPE=ora.asm_listener.type
TARGET=ONLINE , ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2, OFFLINE
NAME=ora.DATA.dg(ora.asmgroup)
TYPE=ora.diskgroup.type
TARGET=ONLINE , ONLINE , OFFLINE
STATE=ONLINE on racnode1, ONLINE on racnode2, OFFLINE
NAME=ora.LISTENER.lsnr
TYPE=ora.listener.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2
NAME=ora.LISTENER_SCAN1.lsnr
TYPE=ora.scan_listener.type
TARGET=ONLINE
STATE=ONLINE on racnode1
NAME=ora.asm(ora.asmgroup)
TYPE=ora.asm.type
TARGET=ONLINE , ONLINE , OFFLINE
STATE=ONLINE on racnode1, ONLINE on racnode2, OFFLINE
NAME=ora.asmnet1.asmnetwork(ora.asmgroup)
TYPE=ora.asm_network.type
TARGET=ONLINE , ONLINE , OFFLINE
STATE=ONLINE on racnode1, ONLINE on racnode2, OFFLINE
NAME=ora.chad
TYPE=ora.chad.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2
NAME=ora.cvu
TYPE=ora.cvu.type
TARGET=ONLINE
STATE=ONLINE on racnode1
NAME=ora.net1.network
TYPE=ora.network.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2
NAME=ora.ons
TYPE=ora.ons.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2
NAME=ora.orclcdb.db
TYPE=ora.database.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on racnode1, ONLINE on racnode2
NAME=ora.qosmserver
TYPE=ora.qosmserver.type
TARGET=ONLINE
STATE=ONLINE on racnode1
NAME=ora.racnode1.vip
TYPE=ora.cluster_vip_net1.type
TARGET=ONLINE
STATE=ONLINE on racnode1
NAME=ora.racnode2.vip
TYPE=ora.cluster_vip_net1.type
TARGET=ONLINE
STATE=ONLINE on racnode2
NAME=ora.scan1.vip
TYPE=ora.scan_vip.type
TARGET=ONLINE
STATE=ONLINE on racnode1
此时的空间状态：
[vagrant@ol7-vagrant-rac ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 4.8G 0 4.8G 0% /dev
tmpfs 4.8G 0 4.8G 0% /dev/shm
tmpfs 4.8G 8.6M 4.8G 1% /run
tmpfs 4.8G 0 4.8G 0% /sys/fs/cgroup
/dev/mapper/vg_main-lv_root 76G 36G 41G 47% /
/dev/sda1 497M 125M 373M 26% /boot
vagrant 1.9T 1.2T 687G 64% /vagrant
tmpfs 973M 0 973M 0% /run/user/1000
此时的内存情况：
[vagrant@ol7-vagrant-rac ~]$ free
total used free shared buff/cache available
Mem: 9958344 4261636 428572 4124668 5268136 1040228
Swap: 4194300 2250268 1944032
参考
- https://github.com/oracle/docker-images/blob/master/OracleDatabase/RAC/OracleRealApplicationClusters/README.md
- https://stackoverflow.com/questions/49822594/vagrant-how-to-specify-the-disk-size
- https://asanga-pradeep.blogspot.com/2018/07/rac-on-docker-single-host-setup.html
- https://marcbrandner.com/blog/increasing-disk-space-of-a-linux-based-vagrant-box-on-provisioning/
- https://stackoverflow.com/questions/27380641/see-full-command-of-running-stopped-container-in-docker
[转帖]如何获得一个RAC Oracle数据库(从Github - oracle/docker-images) - 本地版 ---暂时未做实验.的更多相关文章
- [转帖]如何获得一个Oracle RAC数据库(从Github - oracle/vagrant-boxes) --- 暂时未测试成功 公司网络太差了..
如何获得一个Oracle RAC数据库(从Github - oracle/vagrant-boxes) 2019-11-20 16:40:36 dingdingfish 阅读数 5更多 分类专栏: 如 ...
- .net远程连接oracle数据库不用安装oracle客户端
asp.net远程连接oracle数据库不用安装oracle客户端的方法下面是asp.net连接远程Oracle数据库服务器步骤: 1.asp.net连接oracle服务器需要添加Sytem.Data ...
- .net远程连接oracle数据库不用安装oracle客户端的方法
.net远程连接oracle数据库不用安装oracle客户端的方法步骤: 1.添加Sytem.Data.OracleClient命名空间. 2.连接时需要ConnectionString字符串,出现在 ...
- oracle数据库的备份与还原（本地及远程操作）
数据的导出 exp qh/qh@qh file='d:\backup\qh\qh20060526.dmp' grants=y full=n 1 将数据库TEST完全导出,用户名system 密 ...
- PowerDesigner15连接Oracle数据库并导出Oracle的表结构
PowerDesigner连接Oracle数据库,根据建立的数据源进行E-R图生成.详细步骤如下: 1.启动PowerDesigner 2.菜单:File->Reverse Engineer - ...
- C#连接Oracle数据库的方法(Oracle.DataAccess.Client也叫ODP.net)
官方下载地址(ODP.net)(中文):http://www.oracle.com/technetwork/cn/topics/dotnet/downloads/index.html 官方下载地址(O ...
- 2.oracle数据库：[1]oracle简易客户端安装方法
准备oracle简易客户端程序,如果没有请到oracle网站下载www.oracle.com,可以下载基本包及其他扩展程序包,例如:如果要使用sqlplus则需要下载sqlplus包,笔者下载了i ...
- 基于Oracle数据库登陆界面及功能实现 Java版
首先要在Oracle数据库创建表文件,包括建立表头以及关键字(唯一标识符),此次程序所用的表名称为SW_USER_INFO,表头有UNAME.UKEY.USEX等,关键字为UCC,然后添加一条记录,用 ...
- 【C/C++学院】（24）Oracle数据库编程--管理oracle
一.启动和停止oracle 停止和启动oracle须要切换到oracle用户才干够,其它用户都没有权限启动和停止oracle(包含root也没有权限). 1.执行sqlplus但不登录到oracle: ...
随机推荐
- python数据分析三剑客之: matplotlib绘图模块
matplotlib 一.Matplotlib基础知识 Matplotlib中的基本图表包括的元素 - x轴和y轴 axis 水平和垂直的轴线 - x轴和y轴刻度 tick 刻度标示坐标轴的分隔,包括 ...
- 结对编程作业（java实现）
项目成员:罗海屏.郑晓婷 一 .Github项目地址:https://github.com/ting9500/GNIT_Second 二.PSP表格 PSP2.1 Personal Software ...
- vue用async、await实现同步请求
以下是vue method的demo: loadTableData : async function() { var reses = await $.ajax({ type:'post', url:' ...
- thinkphp5 + barcode 生成条形码
1.去官网下载类库 “https://www.barcodebakery.com/en/download”,选择自己的版本下载 2.解压放到“E:\phpstudy\PHPTutorial\WWW\g ...
- MySQLDump--导出数据脚本异常
在一次使用mysqldump导出数据过程中,发现导出SQL无法正常执行,仔细观察后发下导出脚本为: (,,,,' Yimu(id:5085297)',''¥','[新教室V32] ',15593224 ...
- Linux的httpd服务介绍和部署
软件介绍 客户端代理软件 IE,firefox,chroome,opera 服务器端软件 httpd,Nginx,Tengine,ISS,Lighthttp 应 ...
- 【servlet】Servlet的API和生命周期]
创建时间:6.15 一.Servlet的API(生命周期) (1)Servlet接口中的方法 1)init(ServletConfig config) 何时执行:servlet对象创建的时候执行 Se ...
- 为 Jupyter Notebook指定虚拟环境的 Python 解释器
说明:本机系统为 win10 64 位, base 是集成于 Anaconda3 的 64 位的python,以下是创建虚拟环境 py366-32,安装 3.6.6 版的 32 为python,把 3 ...
- C++负数类型转换,-1对256取模
最近在读C++ primer的时候,发现p32上写道:当我们赋给无符号类型一个超出它表示范围的值时,结果是初始值对无符号类型表示数值总数取模后的余数.因此,把-1赋值给8比特大小的unsigned c ...
- LOJ 2085: 洛谷 P1587: bzoj 4652: 「NOI2016」循环之美
题目传送门:LOJ #2085. 两个月之前做的傻题,还是有必要补一下博客. 题意简述: 求分子为不超过 \(n\) 的正整数,分母为不超过 \(m\) 的正整数的所有互不相等的分数中,有多少在 \( ...