这两天由于一个客户的要求,将MID竖屏时候的状态条上的音量键去掉。所以尝试修改了一下,成功了,分享一下经验。

先看一下修改后的效果图,如下所示 。

横屏的时候:有音量加减键

竖屏的时候:音量加减键被去掉了

然后来说一说我的解决思路。

首先我查看了\mx0831-0525\frameworks\base\packages\SystemUI\res\layout\system_bar.xml文件

<?xml version="1.0" encoding="utf-8"?>
<!--
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
--> <!-- TabletStatusBarView extends FrameLayout -->
<com.android.systemui.statusbar.tablet.TabletStatusBarView
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:systemui="http://schemas.android.com/apk/res/com.android.systemui"
android:background="@drawable/system_bar_background"
> <FrameLayout
android:id="@+id/bar_contents_holder"
android:layout_width="match_parent"
android:layout_height="@*android:dimen/system_bar_height"
android:layout_gravity="bottom"
>
<RelativeLayout
android:id="@+id/bar_contents"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:clipChildren="false"
> <!-- notification icons & panel access -->
<include layout="@layout/system_bar_notification_area"
android:layout_width="wrap_content"
android:layout_height="match_parent"
android:layout_alignParentRight="true"
android:layout_marginTop="1dp"
/> <!-- navigation controls -->
<LinearLayout
android:id="@+id/navigationArea"
android:layout_width="wrap_content"
android:layout_height="match_parent"
android:layout_alignParentLeft="true"
android:orientation="horizontal"
android:clipChildren="false"
android:clipToPadding="false"
>
<com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/back"
android:layout_width="@dimen/navigation_key_width"
android:layout_height="match_parent"
android:src="@drawable/ic_sysbar_back"
systemui:keyCode="4"
android:contentDescription="@string/accessibility_back"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
/>
<com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/home"
android:layout_width="@dimen/navigation_key_width"
android:layout_height="match_parent"
android:src="@drawable/ic_sysbar_home"
systemui:keyCode="3"
android:contentDescription="@string/accessibility_home"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
/>
<com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/recent_apps"
android:layout_width="@dimen/navigation_key_width"
android:layout_height="match_parent"
android:src="@drawable/ic_sysbar_recent"
android:contentDescription="@string/accessibility_recent"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
/> <com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/sub"
android:background="@drawable/sub_normal"
android:layout_width="70dip"
android:layout_height="match_parent"
android:visibility="invisible"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
systemui:keyCode="25"
/>
<com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/add"
android:background="@drawable/add_normal"
android:layout_width="70dip"
android:layout_height="match_parent"
android:visibility="invisible"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
systemui:keyCode="24"
/> <com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/screenshot"
android:layout_width="@dimen/navigation_key_width"
android:layout_height="match_parent"
android:src="@drawable/ic_sysbar_screenshot"
android:contentDescription="@string/accessibility_screenshot"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
/> <com.android.systemui.statusbar.policy.KeyButtonView android:id="@+id/menu"
android:layout_width="@dimen/navigation_menu_key_width"
android:layout_height="match_parent"
android:src="@drawable/ic_sysbar_menu"
systemui:keyCode="82"
android:visibility="invisible"
android:contentDescription="@string/accessibility_menu"
systemui:glowBackground="@drawable/ic_sysbar_highlight"
/>
</LinearLayout> <!-- fake space bar zone -->
<com.android.systemui.statusbar.policy.EventHole android:id="@+id/fake_space_bar"
android:layout_height="match_parent"
android:layout_width="0dp"
android:paddingLeft="8dip"
android:paddingRight="8dip"
android:layout_toRightOf="@+id/navigationArea"
android:layout_toLeftOf="@+id/notificationArea"
android:visibility="gone"
/>
</RelativeLayout>
</FrameLayout> <FrameLayout
android:id="@+id/bar_shadow_holder"
android:layout_width="match_parent"
android:layout_height="@*android:dimen/system_bar_height"
android:layout_gravity="bottom"
>
<!-- lights out shade -->
<RelativeLayout
android:id="@+id/bar_shadow"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:background="#FF000000"
android:visibility="gone"
>
<ImageView
android:id="@+id/dot0"
android:layout_width="80dip"
android:layout_height="48dip"
android:src="@drawable/ic_sysbar_lights_out_dot_small"
android:layout_alignParentLeft="true"
android:layout_alignParentBottom="true"
/>
<ImageView
android:id="@+id/dot1"
android:layout_width="80dip"
android:layout_height="48dip"
android:src="@drawable/ic_sysbar_lights_out_dot_large"
android:layout_toRightOf="@+id/dot0"
android:layout_alignParentBottom="true"
/>
<ImageView
android:id="@+id/dot2"
android:layout_width="80dip"
android:layout_height="48dip"
android:src="@drawable/ic_sysbar_lights_out_dot_small"
android:layout_toRightOf="@+id/dot1"
android:layout_alignParentBottom="true"
/>
<ImageView
android:id="@+id/dot3"
android:layout_width="80dip"
android:layout_height="48dip"
android:src="@drawable/ic_sysbar_lights_out_dot_small"
android:layout_alignParentRight="true"
android:layout_alignParentBottom="true"
/>
</RelativeLayout>
</FrameLayout>
</com.android.systemui.statusbar.tablet.TabletStatusBarView>

在该文件中设置了add按钮(即音量加按钮)和sub按钮(即音量减按钮)的属性,android:visibility="invisible"设置为不可见

但是这样不能达到切换横竖屏的时候的消失和显示的效果。

然后我查看了mx0831-0525\frameworks\base\packages\SystemUI\src\com\android\systemui\statusbar\tablet\TabletStatusBar.java文件

然后修改了该文件的 onConfigurationChanged(Configuration newConfig)方法,修改如下

 @Override
protected void onConfigurationChanged(Configuration newConfig) {
loadDimens();
//edited by ouyangpeng start
if(newConfig.orientation == Configuration.ORIENTATION_LANDSCAPE){
mVolumeUpButton.setVisibility(View.VISIBLE);
mVolumeDownButton.setVisibility(View.VISIBLE);
}else if(newConfig.orientation == Configuration.ORIENTATION_PORTRAIT){
mVolumeUpButton.setVisibility(View.GONE);
mVolumeDownButton.setVisibility(View.GONE);
}
//edited by ouyangpeng end
mNotificationPanelParams.height = getNotificationPanelHeight();
WindowManagerImpl.getDefault().updateViewLayout(mNotificationPanel,
mNotificationPanelParams);
mRecentsPanel.updateValuesFromResources();
mShowSearchHoldoff = mContext.getResources().getInteger(
R.integer.config_show_search_delay);
updateSearchPanel(); }

这样就可以根据android横竖屏来动态设置音量键的消失和显示了。

==================================================================================================

  作者:欧阳鹏  欢迎转载,与人分享是进步的源泉!

  转载请保留原文地址:http://blog.csdn.net/ouyang_peng

==================================================================================================

Android系统移植与调试之------->如何修改Android设备状态条上音量加减键在横竖屏切换的时候的显示于隐藏的更多相关文章

  1. [置顶] Android系统移植与调试之------->如何修改Android设备状态条上音量加减键在横竖屏的时候的切换与显示

    这两天由于一个客户的要求,将MID竖屏时候的状态条上的音量键去掉.所以尝试修改了一下,成功了,分享一下经验. 先看一下修改后的效果图,如下所示 . 横屏的时候:有音量加减键 竖屏的时候:音量加减键被去 ...

  2. Android系统移植与调试之------->如何修改Android系统默认显示【开发者选项】并默认打开【USB调试】和【未知来源】开关

    今天有个用户对[设置]有个特殊的要求,即: 1.开机的时候默认显示[开发者选项]并打开[USB调试]开关    ([Developer options]-->[USB debugging]) 2 ...

  3. Android系统移植与调试之------->如何修改Android手机显示的4G信号强度的格子数

    在修改显示的信号强度之前,先了解一下什么是dB,什么是dBm? 1.dB dB是一个表征相对值的值,纯粹的比值,只表示两个量的相对大小关系,没有单位,当考虑甲的功率相比于乙功率大或小多少个dB时, 按 ...

  4. Android系统移植与调试之------->如何修改Android设备添加重启、飞行模式、静音模式等功能(二)

    今天要说的是为Android设备添加重启.飞行模式.静音模式按钮,客户需求中需要添加这项功能,在长按电源键弹出的菜单中没有这些选项,谨以此文记录自己添加这个功能的过程. 首先找到长按电源键弹出的对话框 ...

  5. Android系统移植与调试之------->如何修改Android手机NFC模块,使黑屏时候能够使用NFC

    我们都知道在不修改源代码的情况下,只能是解锁之后才能使用NFC功能.而在锁屏和黑屏2个状态下是没办法用NFC的,但是最近有个客户要求手机在黑屏状态下能够使用NFC,因此我们需要去修改Android源代 ...

  6. Android系统移植与调试之------->如何修改Android设备存储盘符名称与Android设备的型号

    一.修改Android设备存储盘符名称 (注:TBDG1073为我的项目名称) 1.修改device/other/TBDG1073/system.prop 文件 2.修改ro.media.patiti ...

  7. Android系统移植与调试之------->如何修改Android自带的apk出现一圈圈类似鸡蛋的花纹

    最近被一个问题烦恼到了,就是android4.1系统自带的Email.文件管理器.信息等apk都出现同一个问题,就是现实在平板上的时候会出现一圈圈类似鸡蛋的花纹. 我想了两种方法来解决,第一种方法没有 ...

  8. Android系统移植与调试之------->如何修改Android默认字体大小和设置里面字体大小比例

    因为我修改 ro.sf.lcd_density的值,将它从160修改 为120,所以导致整个系统的字体都变得很小.因此需要将整个字体变大,并且在设置-->显示-->字体大小的4个选项的值都 ...

  9. [置顶] Android系统移植与调试之------->如何修改Android设备添加3G上网功能

    1.首先先来看一下修改前后的效果对比图 step1.插上3G设备前 step2.插上3G设备后,获取信号中.... step3.插上3G设备后,获取到信号 step4.使用3G信号浏览网页 2.下面讲 ...

随机推荐

  1. Cookie的增删改查

    增加: 第一种方法:Response.Cookies[“UserName”].Value=”张三” Response.Cookies[“UserName”].Expires=DateTime.Now. ...

  2. BEGINNING SHAREPOINT&#174; 2013 DEVELOPMENT 第9章节--client对象模型和REST APIs概览 client对象模型API范围

    BEGINNING SHAREPOINT® 2013 DEVELOPMENT 第9章节--client对象模型和REST APIs概览 client对象模型API范围         本章之前提到过. ...

  3. hdu1695 GCD2 容斥原理 求x属于[1,b]与y属于[1,d],gcd(x,y)=k的对数。(5,7)与(7,5)看作同一对。

    GCD Time Limit: / MS (Java/Others) Memory Limit: / K (Java/Others) Total Submission(s): Accepted Sub ...

  4. java -- 路径中包含空格怎么处理

    @.使用toURI()方法 String rootPath = this.getClass().getClassLoader().getResource(".").toURI(). ...

  5. 第二百零一节,jQuery EasyUI,Accordion(分类)组件

    jQuery EasyUI,Accordion(分类)组件 学习要点: 1.加载方式 2.容器属性 3.事件列表 4.方法列表 5.面板属性 本节课重点了解 EasyUI 中 Accordion(选项 ...

  6. Java(System类,currentTimeMillis())

    CurrentTimeMillis()方法来记录程序的执行时间.currentTimeMillis()方法将返回自1970年1月1日午夜起到现在的时间,时间单位是ms,如果要记录程序中一段程序的运行时 ...

  7. ASP.NET动态网站制作(29)-- 正则

    前言:继续讲框架,然后介绍正则的相关知识. 内容: 1.封装分页方法,方便以后调用:响应的CSS代码也可以封装. 2.WEB层里面的页面名称不要和model和dal里面的名称相同. 3.两个表联合查询 ...

  8. NDK,在JNI层使用AssetManager读取文件

    NDK,二进制文件数据读取,在JNI层,通过AAssetManager读取asset内部的资源: 需要头文件的支持 #include <android/asset_manager_jni.h&g ...

  9. 服务器之ipmitool

    一般命令 raw #发送一个原始的IPMI请求,并且打印回复信息. Lan #配置网络(lan)信道(channel) chassis #查看底盘的状态和设置电源 event #向BMC发送一个已经定 ...

  10. linux用户与组管理

    普通用户的管理 用户管理的基本任务包括添加新用户.删除用户.修改用户属性以及对现有用户的访问参数进行设置.与密切 相关的文件包含/etc/passwd./etc/shadow以及/home目录下的文件 ...