List Available DBCC Commands
DBCC Commands or Database Consistency Checker commands have been with SQL Server from its early ages itself. In this article we would list the available DBCC commands listed using the DBCC Help command. Many in this list are undocumented and are rarely used in practical scenarios. But these form the base for debugging complex problems. There are approximately 130 of them.
DBCC activecursors [(spid)]
DBCC addextendedproc (function_name, dll_name)
DBCC addinstance (objectname, instancename)
DBCC adduserobject (name)
DBCC auditevent (eventclass, eventsubclass, success, loginname, rolename, dbusername, loginid)
DBCC autopilot (typeid, dbid, tabid, indid, pages [,flag])
DBCC balancefactor (variance_percent)
DBCC bufcount [(number_of_buffers)]
DBCC buffer ( {'dbname' | dbid} [, objid [, number [, printopt={0|1|2} ][, dirty | io | kept | rlock | ioerr | hashed ]]])
DBCC bytes ( startaddress, length )
DBCC cachestats
DBCC callfulltext
DBCC checkalloc [('database_name'[, NOINDEX | REPAIR])] [WITH NO_INFOMSGS[, ALL_ERRORMSGS][, ESTIMATEONLY]]
DBCC checkcatalog [('database_name')] [WITH NO_INFOMSGS]
DBCC checkconstraints [( 'tab_name' | tab_id | 'constraint_name' | constraint_id )] [WITH ALL_CONSTRAINTS | ALL_ERRORMSGS]
DBCC checkdb [('database_name'[, NOINDEX | REPAIR])] [WITH NO_INFOMSGS[, ALL_ERRORMSGS][, PHYSICAL_ONLY][, ESTIMATEONLY][, DBCC TABLOCK]
DBCC checkdbts (dbid, newTimestamp)]
DBCC checkfilegroup [( [ {'filegroup_name' | filegroup_id} ] [, NOINDEX] )] [WITH NO_INFOMSGS[, ALL_ERRORMSGS][, PHYSICAL_ONLY][, ESTIMATEONLY][, TABLOCK]]
DBCC checkident ('table_name'[, { NORESEED | {RESEED [, new_reseed_value] } } ] )
DBCC checkprimaryfile ( {'FileName'} [, opt={0|1|2|3} ])
DBCC checktable ('table_name'[, {NOINDEX | index_id | REPAIR}]) [WITH NO_INFOMSGS[, ALL_ERRORMSGS][, PHYSICAL_ONLY][, ESTIMATEONLY][, TABLOCK]]
DBCC cleantable ('database_name'|database_id, 'table_name'|table_id, [batch_size])
DBCC cacheprofile [( {actionid} [, bucketid])
DBCC clearspacecaches ('database_name'|database_id, 'table_name'|table_id, 'index_name'|index_id)
DBCC collectstats (on | off)
DBCC concurrencyviolation (reset | display | startlog | stoplog)
DBCC config
DBCC cursorstats ([spid [,'clear']])
DBCC dbinfo [('dbname')]
DBCC dbrecover (dbname [, IgnoreErrors])
DBCC dbreindex ('table_name' [, index_name [, fillfactor ]]) [WITH NO_INFOMSGS]
DBCC dbreindexall (db_name/db_id, type_bitmap)
DBCC dbrepair ('dbname', DROPDB [, NOINIT])
DBCC dbtable [({'dbname' | dbid})]
DBCC debugbreak
DBCC deleteinstance (objectname, instancename)
DBCC des [( {'dbname' | dbid} [, {'objname' | objid} ])]
DBCC detachdb [( 'dbname' )]
DBCC dropcleanbuffers
DBCC dropextendedproc (function_name)
DBCC dropuserobject ('object_name')
DBCC dumptrigger ({'BREAK', {0 | 1}} | 'DISPLAY' | {'SET', exception_number} | {'CLEAR', exception_number})
DBCC errorlog
DBCC extentinfo [({'database_name'| dbid | 0} [, {'table_name' | table_id} [, {'index_name' | index_id | -1}]])]
DBCC fileheader [( {'dbname' | dbid} [, fileid])
DBCC fixallocation [({'ADD' | 'REMOVE'}, {'PAGE' | 'SINGLEPAGE' | 'EXTENT' | 'MIXEDEXTENT'}, filenum, pagenum [, objectid, indid])
DBCC flush ('data' | 'log', dbid)
DBCC flushprocindb (database)
DBCC free dll_name (FREE)
DBCC freeproccache
DBCC freeze_io (db)
DBCC getvalue (name)
DBCC help ('DBCC_command' | '?')
DBCC icecapquery ('dbname', stored_proc_name [, #_times_to_icecap (-1 infinite, 0 turns off)]) Use 'DBCC icecapquery (printlist)' to see list of SP's to profile. Use 'DBCCicecapquery (icecapall)' to profile all SP's.
DBCC incrementinstance (objectname, countername, instancename, value)
DBCC ind ( { 'dbname' | dbid }, { 'objname' | objid }, { indid | 0 | -1 | -2 } )
DBCC indexdefrag ({dbid | dbname | 0}, {tableid | tablename}, {indid | indname})
DBCC inputbuffer (spid)
DBCC invalidate_textptr (textptr)
DBCC invalidate_textptr_objid (objid)
DBCC iotrace ( { 'dbname' | dbid | 0 | -1 }, { fileid | 0 }, bufsize, [ { numIOs | -1 } [, { timeout (sec) | -1 } [, printopt={ 0 | 1 }]]] )
DBCC latch ( address [, 'owners'] [, 'stackdumps'])
DBCC lock ([{'DUMPTABLE' | 'DUMPSTATS' | 'RESETSTATS' | 'HASH'}]|[{'STALLREPORTTHESHOLD', stallthreshold}])
DBCC lockobjectschema ('object_name')
DBCC log ([dbid[,{0|1|2|3|4}[,['lsn','[0x]x:y:z']|['numrecs',num]|['xdesid','x:y']|['extent','x:y']|['pageid','x:y']|['objid',{x,'y'}]|['logrecs',{'lop'|op}...]|['output',x,['filename','x']]...]]])
DBCC loginfo [({'database_name' | dbid})]
DBCC matview ({'PERSIST' | 'ENDPERSIST' | 'FREE' | 'USE' | 'ENDUSE'})
DBCC memobjlist [(memory object)]
DBCC memorymap
DBCC memorystatus
DBCC memospy
DBCC memusage ([IDS | NAMES], [Number of rows to output])
DBCC monitorevents ('sink' [, 'filter-expression'])
DBCC newalloc - please use checkalloc instead
DBCC no_textptr (table_id , max_inline)
DBCC opentran [({'dbname'| dbid})] [WITH TABLERESULTS[,NO_INFOMSGS]]
DBCC outputbuffer (spid)
DBCC page ( {'dbname' | dbid}, filenum, pagenum [, printopt={0|1|2|3} ][, cache={0|1} ])
DBCC perflog
DBCC perfmon
DBCC pglinkage (dbid, startfile, startpg, number, printopt={0|1|2}, targetfile, targetpg, order={1|0})
DBCC pintable (database_id, table_id)
DBCC procbuf [({'dbname' | dbid}[, {'objname' | objid}[, nbufs[, printopt = { 0 | 1 } ]]] )]
DBCC proccache
DBCC prtipage (dbid, objid, indexid [, [{{level, 0} | {filenum, pagenum}}] [,printopt]])
DBCC pss [(uid[, spid[, printopt = { 1 | 0 }]] )]
DBCC readpage ({ dbid, 'dbname' }, fileid, pageid, formatstr [, printopt = { 0 | 1} ])
DBCC rebuild_log (dbname [, filename])
DBCC renamecolumn (object_name, old_name, new_name)
DBCC resource
DBCC row_lock (dbid, tableid, set) - Not Needed
DBCC ruleoff ({ rulenum | rulestring } [, { rulenum | rulestring } ]+)
DBCC ruleon ( rulenum | rulestring } [, { rulenum | rulestring } ]+)
DBCC setcpuweight (weight)
DBCC setinstance (objectname, countername, instancename, value)
DBCC setioweight (weight)
DBCC show_statistics ('table_name', 'target_name')
DBCC showcontig (table_id | table_name [, index_id | index_name] [WITH FAST, ALL_INDEXES, TABLERESULTS [,ALL_LEVELS]])
DBCC showdbaffinity
DBCC showfilestats [(file_num)]
DBCC showoffrules
DBCC showonrules
DBCC showtableaffinity (table)
DBCC showtext ('dbname', {textpointer | {fileid, pageid, slotid [,option]}})
DBCC showweights
DBCC shrinkdatabase ({dbid | 'dbname'}, [freespace_percentage [, {NOTRUNCATE | TRUNCATEONLY}]])
DBCC shrinkdb is no longer supported. Please use shrinkdatabase instead
DBCC shrinkfile ({fileid | 'filename'}, [compress_size [, {NOTRUNCATE | TRUNCATEONLY | EMPTYFILE}]])
DBCC sqlmgrstats
DBCC sqlperf (LOGSPACE)({IOSTATS | LRUSTATS | NETSTATS | RASTATS [, CLEAR]} | {THREADS} | {LOGSPACE})
DBCC stackdump [( {uid[, spid[, ecid]} | {threadId, 'THREADID'}] )]
DBCC tab ( dbid, objid )
DBCC tape_control {'query' | 'release'}[,('\\.\tape<n>')]
DBCC tec [( uid[, spid[, ecid]] )]
DBCC textall [({'database_name'|database_id}[, 'FULL' | FAST] )]
DBCC textalloc ({'table_name'|table_id}[, 'FULL' | FAST])
DBCC thaw_io (db)
DBCC traceoff [( tracenum [, tracenum ... ] )]
DBCC traceon [( tracenum [, tracenum ... ] )]
DBCC tracestatus (trace# [, ...trace#])
DBCC unpintable (dbid, table_id)
DBCC updateusage ({'database_name'| 0} [, 'table_name' [, index_id]]) [WITH [NO_INFOMSGS] [,] COUNT_ROWS]
DBCC upgradedb (db)
DBCC usagegovernor (command, value)
DBCC useplan [(number_of_plan)]
DBCC useroptions
DBCC wakeup (spid)
DBCC writepage ({ dbid, 'dbname' }, fileid, pageid, offset, length, data)
Note: Please DONOT use DBCC commands on Production or live database without consulting your Database administrators.
List Available DBCC Commands的更多相关文章
- SQL Server 2000 ——DBCC命令
http://blog.163.com/ruifeng_00/blog/static/6904584200971291923462/ 一.定义 微软当初从SYBASE将DBCC是作为数据库一致性检 ...
- 几个未公开的 DBCC 命令
http://blog.csdn.net/CathySun118/article/category/538610 https://ask.hellobi.com/blog/lyhabc/1612 1. ...
- DMVsinSQLServer -- 备
/*************************************************************************************************** ...
- SQL Server 2008性能故障排查(一)——概论
原文:SQL Server 2008性能故障排查(一)--概论 备注:本人花了大量下班时间翻译,绝无抄袭,允许转载,但请注明出处.由于篇幅长,无法一篇博文全部说完,同时也没那么快全部翻译完,所以按章节 ...
- Microsoft SQL Server Trace Flags
Complete list of Microsoft SQL Server trace flags (585 trace flags) REMEMBER: Be extremely careful w ...
- [SQL] SQL 日常检查脚本
--sqlserver 日常检查脚本 print '----------------------------' print ' 0.sqlserver all information ' print ...
- SQLSERVER性能计数器的简单剖析
SQLSERVER性能计数器的简单剖析 今晚看了这篇文章:SQL Server 2012新performance counter:非常实用的Batch Resp Statistics 文章里介绍到SQ ...
- sp_trace_setevent sqlserver跟踪事件及列
常用几个事件 10 RPC:Completed12 SQL:BatchCompleted43 SP:Completed sp_trace_setevent sp_trace_setevent [ @t ...
- 神器与经典--DMVsinSQLServer
前言: 在不经意间发现这个SQL,正能量瞬间饱满,赶紧向周边的人分享,私藏是罪过啊! 请复制粘贴然后F5,经典无须多说! /************************************** ...
随机推荐
- WinForm 中 comboBox控件数据绑定
一.IList 现在我们直接创建一个List集合,然后绑定 IList<string> list = new List<string>(); list.Add("11 ...
- dataTables使用整理(一)
初次使用dataTables,对一些用到的属性及遇到的问题做一个简要的记录 参考资料: http://blog.csdn.net/mickey_miki/article/details/8240477 ...
- tornado关于AsyncHTTPClient的使用笔记
先来一段同步的httpclient使用代码 url = 'https://www.baidu.com/' http_client = HTTPClient() response = http_clie ...
- CentOS7下搭建LAMP+FreeRadius+Daloradius Web管理
注意:本文所有命令均在root命令下执行. freeradius服务官网:http://freeradius.org/ daloradius Web管理页面官网:https://sourceforge ...
- [HTML]html读取本地文件并显示
<html> <body> <script script type="text/javascript"> function show() { v ...
- 力扣(LeetCode)412. Fizz Buzz
写一个程序,输出从 1 到 n 数字的字符串表示. 如果 n 是3的倍数,输出"Fizz": 如果 n 是5的倍数,输出"Buzz": 3.如果 n 同时是3和 ...
- 关于repaint和reflow的笔记
repaint(重绘) ,repaint发生更改时,元素的外观被改变,且在没有改变布局的情况下发生,如改变outline,visibility,background color,box-shadow不 ...
- sort-选择排序
void sort_select(vector<int> &v) { for(int i=0;i<v.size()-1;i++) { int min=v[i]; int in ...
- windows/browser ----> cmd命令/powershell命令/chrome插件vimuim命令
windows 7 cmd常用命令: 1.进入某盘,比如d盘:d:(有一个冒号) 2.显示d盘的文件夹和文件:dir 3.进入d盘某个文件夹:cd filename 4.清除屏幕:cls 5.查看ip ...
- MySQL的自动补全和语法高亮工具MyCli
官方地址: RHEL, Centos: We don't have packages for RHEL or Centos, yet. Instead, use pip to install mycl ...