国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用。

最新更新:2016年11月11日 18:05:40 阿里云提供Maven私服,我把配置文件贴一下,自己放在maven的conf下就行,setting.xml

https://github.com/ae6623/Zebra/blob/master/maven-repo-settings-ali.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
-->
<localRepository>D:\Repositories\Maven</localRepository> <!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
--> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
--> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
<pluginGroup>org.mortbay.jetty</pluginGroup>
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
<server>
<id>releases</id>
<username>ali</username>
<password>ali</password>
</server>
<server>
<id>Snapshots</id>
<username>ali</username>
<password>ali</password>
</server>
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
-->
<mirror>
<!--This sends everything else to /public -->
<id>nexus</id>
<mirrorOf>*</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/groups/public/</url>
</mirror>
<mirror>
<!--This is used to direct the public snapshots repo in the
profile below over to a different nexus group -->
<id>nexus-public-snapshots</id>
<mirrorOf>public-snapshots</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>
</mirror>
</mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<profile>
<id>development</id>
<repositories>
<repository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
<profile>
<!--this profile will allow snapshots to be searched when activated-->
<id>public-snapshots</id>
<repositories>
<repository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
</profiles> <activeProfiles>
<activeProfile>development</activeProfile>
<activeProfile>public-snapshots</activeProfile>
</activeProfiles>
</settings>

收集的仓库如下:

#收集的比较快的maven仓库
http://maven.wso2.org/nexus/content/groups/public/
http://jcenter.bintray.com/
http://maven.antelink.com/content/repositories/central/
http://nexus.openkoala.org/nexus/content/groups/Koala-release/
http://maven.tmatesoft.com/content/groups/public/
http://mavensync.zkoss.org/maven2/
http://maven.springframework.org/release/
<mirror>
<id>UK</id>
<name>UK Central</name>
<url>http://uk.maven.org/maven2</url>
<mirrorOf>central</mirrorOf>
</mirror> <mirror>
<id>sonatype</id>
<name>sonatype Central</name>
<url>http://repository.sonatype.org/content/groups/public/</url>
<mirrorOf>central</mirrorOf>
</mirror> <mirror>
<id>jboss-public-repository-group</id>
<name>JBoss Public Repository Group</name>
<url>http://repository.jboss.org/nexus/content/groups/public</url>
<mirrorOf>central</mirrorOf>
</mirror>

2016年11月20日16:38:27

www.js-dev.cn

@落雨

国内阿里maven仓库镜像maven配置文件maven仓库速度快的更多相关文章

  1. Maven使用教程一:Maven基础

    使用Maven快速创建一个工程 为了加快速度,在setting.xml中加一段配置,用国内阿里云的镜像仓库可以去下载各种东西. <mirror> <id>nexus-aliyu ...

  2. [转]国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快

    原文地址:http://www.cnblogs.com/ae6623/p/4416256.html 国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. ...

  3. 国内阿里Maven仓库镜像及自己收集镜像库

    国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快   国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. 最新更新:2016年11月11 ...

  4. 将Maven镜像更换为国内阿里云仓库

    1.国内访问maven默认远程中央镜像特别慢 2.用阿里的镜像替代远程中央镜像 3.大部分jar包都可以在阿里镜像中找到,部分jar包在阿里镜像中没有,需要单独配置镜像 换为国内镜像,让你感受飞一般的 ...

  5. 国内下载比较快的Maven仓库镜像

    #收集的比较快的maven仓库 http://maven.wso2.org/nexus/content/groups/public/ http://jcenter.bintray.com/http:/ ...

  6. Maven国内阿里镜像(Maven下载慢的解决方法)

    Maven是当前流行的项目管理工具,但官方的库在国外经常连不上,连上也下载速度很慢.国内oschina的maven服务器很早之前就关了.今天发现阿里云的一个中央仓库,亲测可用. <mirror& ...

  7. 各个Maven仓库镜像(包括国内)

    各个Maven仓库镜像(包括国内) 衽孤魍墓 ゅ槭 众矿工唯唯诺诺我在旁哭笑不得原 宦蠃サ 骘猩池 粑涫汾滹 吧滔哌蹋 飑俗た 狃攵庾唾 想必是想挡住什么我想反正这笔筒也不是 翡蜮胼 娴左 ...

  8. 国内maven库镜像(阿里云)

    我觉得fuck GFW(Great FireWall) 真是阻碍国内技术发展罪大恶极的东西.各种不方便,各种落后,各种闭塞. anyway,maven中央仓库,本来有oschina的可以用,现在关了. ...

  9. maven配置多仓库镜像(转)

    原文地址:maven配置多仓库镜像 问题场景: 1.国内访问maven默认远程中央镜像特别慢 2.用阿里的镜像替代远程中央镜像 3.大部分jar包都可以在阿里镜像中找到,部分jar包在阿里镜像中没有, ...

随机推荐

  1. JavaMelody 项目性能监控和调优工具

    转自 JavaMelody 可以实现对内存.CPU.线程.JDBC 连接数.HTTP 请求执行时间.SQL 执行时间(分析 Top SQL).方法执行时间(分析系统方法性能瓶颈)等等的监控. 配置方式 ...

  2. 查看name的状态,是属于active还是standby

    sudo -E -u hadoop /home/hadoop/bin/hdfs haadmin -getServiceState nn1 sudo -E -u hadoop /home/hadoop/ ...

  3. 047 SparkSQL自定义UDF函数

    一:程序部分 1.需求 Double数据类型格式化,可以给定小数点位数 2.程序 package com.scala.it import org.apache.spark.{SparkConf, Sp ...

  4. Scrapy-redis 安装配置使用

    # 安装redis服务器端 sudo apt-get install redis-server # 安装scrapy和scrapy-redis库 pip install scrapy pip inst ...

  5. vee-validate校验demo

    //太长了,把异步校验放到前面吧: VeeValidate.Validator.extend('checkLoginName',{ getMessage:function () { return &q ...

  6. (openssl_pkey_get_private 函数不存在)phpstudy开启openssl.dll 时提示httpd.exe 丢失libssl-1_1.dll

    下载libssl-1_1.dll  丢到apache目录下的bin目录下(貌似要32位的)

  7. webpack 4.x之搭建前端开发环境

    webpack是一个现代JavaScript应用程序的静态模块打包器,借用官网的一张图,它能够将一些预处理语言,js的最新语法转换成浏览器识别的内容.现在一般的前端框架都有比较成熟的脚手架,大多数对w ...

  8. elf 学习

    现在我们使用 readelf 命令来查看 elfDome.out 的文件头 readelf -l elfDemo.out 使用 readelf 来查看程序头: readelf -S elfDemo.o ...

  9. jsp页面执行java语法,获取的值在页面调用

    首先在页面头引用用到类的包路径 写需要执行的java语法 页面转换引用 <!-- 引用包路径 --> <%@ page language="java" impor ...

  10. SpringBoot扫描不到controller

    访问报错: 原因:启动类文件存放位置问题,应该放在controller包同级目录下,如下图: ---不积跬步无以至千里,不积小流无以成江海