一次，虚拟机中CentOS不明原因死机了，终端打开不能操作，SecureCRT和从SecureCRT中运行的托关于本机Windows下的Xming下的gedit也死掉了，无奈只能强制关机。重新启动后其他一切正常，再次于SecureCRT启动gedit则报如下错误：

[gzg@centos bin]$ GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-ISoxtnsWOw: Connection refused)

网上查到的解决方法，如这篇文章所说的也不能解决。后勿删/usr/bin/gnome-session文件，导致桌面系统不能启动，只有重新安装了gnome-session。问题依旧。

终于google到此篇文章，问题终于解决，不过project插件丢失，也只有重装了。

以root身份执行下面命令
dbus-uuidgen >/var/lib/dbus/machine-id

至此，问题解决，但是其中原因却是不甚了了，望达者告知，不胜感谢。

一则Gedit死机引起的错误之解决的更多相关文章

  1. iOS开发之—— XCODE真机调试设备连接一直忙碌如何处理！（真机调试各种错误提示解决）

    真机调试,想连接真机调试代码可是连上设备后就一直转圈, 在Divice里面一直提示“iphone名称” is busy: Processing symbol files Xcode will cont ...

  2. 【转】错误日志ID8021来源BROWSER导致电脑死机

    现场工控机死机,网上查了篇文章,具体原因还有待分析,下面是图 在这里有必要介绍两个ID号:6006和6005.在事件查看器里ID号为6006的事件表示事件日志服务已停止,如果你没有在当天的事件查看器中 ...

  3. win7蓝屏死机0x0000003B错误蓝屏故障解决

    win7蓝屏死机0x0000003B错误蓝屏故障解决 刚才一个朋友问我:电脑蓝屏了怎么办. 我问他要了电脑的截图,自己看了错误代码:0x0000003B 搜索资料,查询了一番.都是说电脑中病毒或者是系 ...

  4. emwin之错误使用控件函数导致死机现象

    @2018-10-15 导致死机的代码示例如下 /** * @brief widget ID define * @{ */ #define ID_WINDOW_0 (GUI_ID_USER + 0x0 ...

  5. APP测试点总结(功能，交互，死机崩溃状态分析，容易出错的检查点）

    APP测试点总结(功能,交互,死机崩溃状态分析,容易出错的检查点) 版权声明:本文为博主原创文章,未经博主允许不得转载. 最近涉足APP端测试,常见检查点总结如下:   一.业务方面: 1.  注册( ...

  6. android 常见死机问题--log分析

    http://blog.csdn.net/fangchongbory/article/details/7645815         android 常见死机问题--log分析============ ...

  7. android死机问题

    一般在平时工作中,基本上很多代码可以在eclipse+ndk进行调试,但如果需要用到具体的硬件设备,如媒体播放设备无法模拟的情况下,只能上硬件(盒子或手机)上进行调试.此时唯一的调试手段就是logca ...

  8. php-fpm死机解决办法，脚本后台自动重启

    本人用nginx+php7搭建了一台服务器,因为请求量太大,而且php里面又有挂起的任务,导致php-fpm在高峰期的时候经常死掉,吧php-fpm的最大进程数已经改到1000了,还是吃不消,cpu也 ...

  9. Windows-WMI 事件 ID 10或0x80041003 死机 解药

    最近笔记本重复了好几次奇怪的现象,重启后进入桌面,然后死机,木有蓝屏. 后来在安全模式里查了事件,如下 日志名称:          Application 来源:            Micros ...

随机推荐

  1. ARKit从入门到精通（2）-ARKit工作原理及流程介绍

    转载:http://blog.csdn.net/u013263917/article/details/73038519 1.1-写在前面的话 1.2-ARKit与SceneKit的关系 1.3-ARK ...

  2. kali Rolling安装之后的一些常用配置总结（更新）

    原文: https://ssooking.github.io/kali-rolling-an-zhuang-zhi-hou-de-yi-xie-chang-yong-pei-zhi-zong-jie/ ...

  3. Android 底部按钮BottomNavigationView + Fragment + viewPager 的使用（一）

    实现的效果,左右滑动,底部栏跟着滑动,中间加的是分帧的页面        上代码:主页面activity_main.xml <?xml version="1.0" encod ...

  4. spark streaming从指定offset处消费Kafka数据

    spark streaming从指定offset处消费Kafka数据 -- : 770人阅读 评论() 收藏 举报 分类: spark() 原文地址:http://blog.csdn.net/high ...

  5. C#使用System.IO.Path获取文件路径、文件名

    class Program { static void Main(string[] args) { //获取当前运行程序的目录 string fileDir = Environment.Current ...

  6. python使用selenium

    首先安装 pip install selenium 测试抓取baidu,其中的chromedriver.exe需要自己下载,百度有很多的 import timefrom selenium import ...

  7. Spring Bean装配学习

    解释:所谓装配就是把一个类需要的组件给它设置进去,英文就是wire,wiring:注解Autowire也叫自动装配. 目前Spring提供了三种配置方案: 在XML中进行显式的配置 在Java中进行显 ...

  8. HTTP1.1 协议

    Response Headers 响应头 Expires 设置响应内容的过期时间 过期时间头信息属性值只能是HTTP格式的日期时间,HTTP的日期时间必须是格林威治时 间(GMT),而不是本地时间.举 ...

  9. 配置nginx

    咱不玩服务器,只在把人家的配置拷贝一份,建个自己的测试服务器 1. 如果nginx已配置(相当于windows在环境变量中配置了path吧) 查找nginx配置路径: whereis nginx 一般 ...

  10. Nagios系列1，选择

    Zabbix和Nagios哪个更好 zabbix: 1.分布式监控,适合于构建分布式监控系统,具有node,proxy 2种分布式模式 2.自动化功能,自动发现,自动注册主机,自动添加模板,自动添加分 ...