centos7.6下编译安装zabbix4.0.10长期支持版
一、安装数据库，这里使用的是percona-server5..24版本
配置如下 [root@zabbix4_clone:~]# cat /etc/my.cnf
# Example MySQL config file for medium systems.
# 8核 16G
# This is for a system with little memory (16G) where MySQL plays
[client]
#password = your_password
port =
socket = /tmp/mysql.sock # The MySQL server
[mysqld]
user = mysql
port =
bind-address = 0.0.0.0
socket = /tmp/mysql.sock
datadir = /data/mysql_data
pid-file = /data/mysql_data/mysql.pid
basedir = /usr/local/mysql
tmpdir = /tmp #此开关默认为NULL，即不允许导入导出。
#secure-file-priv = /opt/upload #-------------------------------gobal variables------------------------#
#默认关闭，涉及到timestamp类型的列自动更新的问题
explicit_defaults_for_timestamp =
###transaction_write_set_extraction = XXHASH64 #以便在server收集写集合的同时将其记录到二进制日志。并且是行更改后的唯一标识此标识将用于检测冲突。
###loose-group_replication_group_name = 'ce9be252-2b71-11e6-b8f4-00212889f856' #组的名字可以随便起,但不能用主机的GTID
###loose-group_replication_start_on_boot = off #为了避免每次启动自动引导具有相同名称的第二个组,所以设置为OFF。
###loose-group_replication_bootstrap_group = off #同上
###loose-group_replication_local_address = '192.168.1.88:33071' #写自己主机所在IP
###loose-group_replication_group_seeds ='192.168.1.88:33071,192.168.1.89:33071,192.168.1.90:33071'
###loose-group_replication_single_primary_mode = off #关闭单主模式的参数
###loose-group_replication_enforce_update_everywhere_checks = on #开启多主模式的参数 skip-external-locking
skip-name-resolve
skip-ssl #memory is 16G
key_buffer_size = 32M
table_open_cache =
table_definition_cache =
sort_buffer_size = 4M
net_buffer_length = 32K
read_buffer_size = 4M
read_rnd_buffer_size = 16M open_files_limit =
thread_cache_size =
query_cache_type =
query_cache_size = 32M
max_write_lock_count =
wait_timeout =
interactive_timeout =
net_read_timeout =
net_write_timeout = max_connections =
max_user_connections =
max_connect_errors =
max_allowed_packet = 256M
back_log =
log_timestamps = system
performance_schema = OFF
character_set_server = utf8mb4 ##当链接数耗尽后，通过设置别用端口，让root可以登录
extra_max_connections =
extra_port = ###让mysql不区分大小写敏感
lower_case_table_names = #explicit_defaults_for_timestamp = #----------------Myisam--------------------------------#
myisam_recover_options = DEFAULT
bulk_insert_buffer_size = 32M
myisam_sort_buffer_size = 64M
myisam_max_sort_file_size = 256M
myisam_repair_threads = #if the query is exec time great than 2 seconds, the query will log to slow log if slowlog is enabled.
long_query_time =
slow_query_log = On
slow-query-log-file = /data/mysql_data/slow.log
show_compatibility_56 = on # Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking #----------------------------MySQL Log----------------#
# Replication Master Server (default)
# binary logging is required for replication
log-bin = mysql-bin
expire_logs_days =
log_error = error.log
log_error_verbosity =
log_warnings = # binary logging format - mixed recommended
binlog_format = row
relay-log = mysql-relay-bin
relay-log-index = relay.index
# required unique id between and ^ -
server-id =
#sql-mode = "NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
#sql-mode = "NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
sync_binlog =
log_slave_updates =
#binlog_checksum = NONE #------------------------------replicate--------------#
#排除不需要同步的库表
#replicate-ignore-db = mysql
#replicate-ignore-db = sys
replicate-ignore-db = information_schema
replicate-ignore-db = performance_schema
replicate-ignore-db = undolog
replicate-ignore-db = for_nagios
replicate-ignore-db = undolog #replicate_wild_ignore_table = mysql.%
#replicate_wild_ignore_table = sys.%
replicate_wild_ignore_table = information_schema.%
replicate_wild_ignore_table = performance_schema.%
replicate_wild_ignore_table = undolog.%
replicate_wild_ignore_table = for_nagios.%
replicate_wild_ignore_table = undolog.% #主主复制需要开启
#auto_increment_offset=
#auto_increment_increment= #GTID模式复制，需要开启如下
gtid_mode = ON
enforce_gtid_consistency = ON #并发复制
slave-parallel-type = LOGICAL_CLOCK
slave-parallel-workers =
master_info_repository = TABLE
relay_log_info_repository = TABLE
relay_log_recovery = ON #跳过slave进程启动参数
skip-slave-start #如果实例为从库，则需要设置为on
#read_only = on #skip-grant-tables #--------------------------------------------------------innoDB------------#
innodb_rollback_on_timeout
# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /data/mysql_data
innodb_data_file_path = ibdata1:1G;ibdata2:1G:autoextend
innodb_log_group_home_dir = /data/mysql_data
innodb_undo_directory = /data/mysql_data/undolog/
innodb_undo_logs =
innodb_undo_tablespaces = # You can set .._buffer_pool_size up to - %
#innodb_use_sys_malloc =
#innodb_page_size =
innodb_buffer_pool_size = 2G
innodb_buffer_pool_instances =
#innodb_additional_mem_pool_size = 8M # Set .._log_file_size to % of buffer pool size
innodb_log_file_size = 256M
innodb_log_buffer_size = 64M
innodb_log_files_in_group =
#每次事务提交时MySQL都会把log buffer的数据写入log file，并且flush(刷到磁盘)中去，该模式为系统默认
innodb_flush_log_at_trx_commit =
innodb_lock_wait_timeout =
#启用独立表空间
innodb_file_per_table = #CPU是1颗8核的，那么可以设置
innodb_read_io_threads =
innodb_write_io_threads = #默认是0，则表示没有并发线程数限制，所有请求都会直接请求线程执行，当并发用户线程数量小于64，建议设置innodb_thread_concurrency=，在大多数情况下，最佳的值是小于并接近虚拟CPU的个数
innodb_thread_concurrency =
innodb_max_dirty_pages_pct =
innodb_flush_method = O_DIRECT innodb_purge_threads =
innodb_large_prefix = #参数待测试
#innodb_io_capacity =
#innodb_io_capacity_max = #根据CPU核心数来设定
thread_pool_size =
#thread_handling = pool-of-threads
thread_pool_oversubscribe = #thread_handling = pool-of-threads
thread_pool_stall_limit =
thread_pool_max_threads = #解释： 在启动时把热数据加载到内存。
innodb_buffer_pool_load_at_startup =
#解释： 在关闭时把热数据dump到本地磁盘
innodb_buffer_pool_dump_at_shutdown = ##默认是8M, 如果一次insert数据量比较多的话, 可以适当增加
innodb_autoextend_increment = [mysqldump]
quick
max_allowed_packet = 256M [mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates [myisamchk]
#key_buffer_size = 20M
#sort_buffer_size = 20M
key_buffer_size = 200M
sort_buffer_size = 200M
read_buffer = 2M
write_buffer = 2M [mysqld_safe]
#控制文件打开数的show global status like 'open%file%';比较合适的设置：Open_files / open_files_limit * % <= %
open-files-limit =
log-error = /data/mysql_data/error.log [mysqlhotcopy]
interactive-timeout # 初始化语句 /usr/local/mysql/bin/mysqld --initialize-insecure --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql_data .启动数据库服务
# /etc/init.d/mysql start [root@zabbix4_clone:~]# ss -tuanlp|grep
tcp LISTEN *: *:* users:(("mysqld",pid=,fd=))
tcp LISTEN *: *:* users:(("mysqld",pid=,fd=)) ####启动脚本
[root@zabbix4_clone:~]# cat /etc/init.d/mysql
#!/bin/sh
# Copyright Abandoned TCX DataKonsult AB & Monty Program KB & Detron HB
# This file is public domain and comes with NO WARRANTY of any kind # MySQL (Percona Server) daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based
# systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.
# When this is done the mysql server will be started when the machine is
# started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux
# chkconfig:
# description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions
### BEGIN INIT INFO
# Provides: mysql
# Required-Start: $local_fs $network $remote_fs
# Should-Start: ypbind nscd ldap ntpd xntpd
# Required-Stop: $local_fs $network $remote_fs
# Default-Start:
# Default-Stop:
# Short-Description: start and stop MySQL (Percona Server)
# Description: Percona-Server is a SQL database engine with focus on high performance.
### END INIT INFO # If you install MySQL on some other places than /usr/local/percona-server-5.7., then you
# have to do one of the following things for this script to work:
#
# - Run this script from within the MySQL installation directory
# - Create a /etc/my.cnf file with the following information:
# [mysqld]
# basedir=<path-to-mysql-installation-directory>
# - Add the above to any other configuration file (for example ~/.my.ini)
# and copy my_print_defaults to /usr/bin
# - Add the path to the mysql-installation-directory to the basedir variable
# below.
#
# If you want to affect other MySQL variables, you should make your changes
# in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get
# overwritten by settings in the MySQL configuration files. basedir=
datadir= # Default value, in seconds, afterwhich the script should timeout waiting
# for server start.
# Value here is overriden by value in my.cnf.
# means don't wait at all
# Negative numbers mean to wait indefinitely
service_startup_timeout= # Lock directory for RedHat / SuSE.
lockdir='/var/lock/subsys'
lock_file_path="$lockdir/mysql" # The following variables are only set for letting mysql.server find things. # Set some defaults
mysqld_pid_file_path=
if test -z "$basedir"
then
basedir=/usr/local/percona-server-5.7.
bindir=/usr/local/percona-server-5.7./bin
if test -z "$datadir"
then
datadir=/data/mysql_data
fi
sbindir=/usr/local/percona-server-5.7./bin
libexecdir=/usr/local/percona-server-5.7./bin
else
bindir="$basedir/bin"
if test -z "$datadir"
then
datadir="$basedir/data"
fi
sbindir="$basedir/sbin"
libexecdir="$basedir/libexec"
fi # datadir_set is used to determine if datadir was set (and so should be
# *not* set inside of the --basedir= handler.)
datadir_set= #
# Use LSB init script functions for printing messages, if possible
#
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions ; then
. $lsb_functions
else
log_success_msg()
{
echo " SUCCESS! $@"
}
log_failure_msg()
{
echo " ERROR! $@"
}
fi PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"
export PATH mode=$ # start or stop [ $# -ge ] && shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action
# Expected: "--skip-networking --skip-grant-tables"
# They are not checked here, intentionally, as it is the resposibility
# of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in
*c*,-n*) echo_n= echo_c= ;;
*c*,*) echo_n=-n echo_c= ;;
*) echo_n= echo_c='\c' ;;
esac parse_server_arguments() {
for arg do
case "$arg" in
--basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'`
bindir="$basedir/bin"
if test -z "$datadir_set"; then
datadir="$basedir/data"
fi
sbindir="$basedir/sbin"
libexecdir="$basedir/libexec"
;;
--datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'`
datadir_set=
;;
--pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
--service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
esac
done
} wait_for_pid () {
verb="$1" # created | removed
pid="$2" # process ID of the program operating on the pid-file
pid_file_path="$3" # path to the PID file. i=
avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in
'created')
# wait for a PID-file to pop into existence.
test -s "$pid_file_path" && i='' && break
;;
'removed')
# wait for this PID-file to disappear
test ! -s "$pid_file_path" && i='' && break
;;
*)
echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path"
exit
;;
esac # if server isn't running, then pid-file will never be updated
if test -n "$pid"; then
if kill - "$pid" >/dev/null; then
: # the server still runs
else
# The server may have exited between the last pid-file check and now.
if test -n "$avoid_race_condition"; then
avoid_race_condition=""
continue # Check again.
fi # there's nothing that will affect the file.
log_failure_msg "The server quit without updating PID file ($pid_file_path)."
return # not waiting any more.
fi
fi echo $echo_n ".$echo_c"
i=`expr $i + `
sleep done if test -z "$i" ; then
log_success_msg
return
else
log_failure_msg
return
fi
} # Get arguments from the my.cnf file,
# the only group, which is read from now on is [mysqld]
if test -x "$bindir/my_print_defaults"; then
print_defaults="$bindir/my_print_defaults"
else
# Try to find basedir in /etc/my.cnf
conf=/etc/my.cnf
print_defaults=
if test -r $conf
then
subpat='^[^=]*basedir[^=]*=\(.*\)$'
dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`
for d in $dirs
do
d=`echo $d | sed -e 's/[ ]//g'`
if test -x "$d/bin/my_print_defaults"
then
print_defaults="$d/bin/my_print_defaults"
break
fi
done
fi # Hope it's in the PATH ... but I doubt it
test -z "$print_defaults" && print_defaults="my_print_defaults"
fi #
# Read defaults file from 'basedir'. If there is no defaults file there
# check if it's in the old (depricated) place (datadir) and read it from there
# extra_args=""
if test -r "$basedir/my.cnf"
then
extra_args="-e $basedir/my.cnf"
fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` #
# Set pid file if not given
#
if test -z "$mysqld_pid_file_path"
then
mysqld_pid_file_path=$datadir/`hostname`.pid
else
case "$mysqld_pid_file_path" in
/* ) ;;
* ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;;
esac
fi case "$mode" in
'start')
# Start daemon # Safeguard (relative paths, core dumps..)
cd $basedir echo $echo_n "Starting MySQL (Percona Server)"
if test -x $bindir/mysqld_safe
then
# Give extra arguments to mysqld with the my.cnf file. This script
# may be overwritten at next upgrade.
$bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null &
wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$? # Make lock for RedHat / SuSE
if test -w "$lockdir"
then
touch "$lock_file_path"
fi exit $return_value
else
log_failure_msg "Couldn't find MySQL server ($bindir/mysqld_safe)"
fi
;; 'stop')
# Stop daemon. We use a signal here to avoid having to know the
# root password. if test -s "$mysqld_pid_file_path"
then
# signal mysqld_safe that it needs to stop
touch "$mysqld_pid_file_path.shutdown" mysqld_pid=`cat "$mysqld_pid_file_path"` if (kill -0 $mysqld_pid 2>/dev/null)
then
echo $echo_n "Shutting down MySQL (Percona Server)"
kill $mysqld_pid
# mysqld should remove the pid file when it exits, so wait for it.
wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$?
else
log_failure_msg "MySQL (Percona Server) server process #$mysqld_pid is not running!"
rm "$mysqld_pid_file_path"
fi # Delete lock for RedHat / SuSE
if test -f "$lock_file_path"
then
rm -f "$lock_file_path"
fi
exit $return_value
else
log_failure_msg "MySQL (Percona Server) PID file could not be found!"
fi
;; 'restart')
# Stop the service and regardless of whether it was
# running or not, start it again.
if $0 stop $other_args; then
$0 start $other_args
else
log_failure_msg "Failed to stop running server, so refusing to try to start."
exit 1
fi
;; 'reload'|'force-reload')
if test -s "$mysqld_pid_file_path" ; then
read mysqld_pid < "$mysqld_pid_file_path"
kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL (Percona Server)"
touch "$mysqld_pid_file_path"
else
log_failure_msg "MySQL (Percona Server) PID file could not be found!"
exit 1
fi
;;
'status')
# First, check to see if pid file exists
if test -s "$mysqld_pid_file_path" ; then
read mysqld_pid < "$mysqld_pid_file_path"
if kill -0 $mysqld_pid 2>/dev/null ; then
log_success_msg "MySQL (Percona Server) running ($mysqld_pid)"
exit 0
else
log_failure_msg "MySQL (Percona Server) is not running, but PID file exists"
exit 1
fi
else
# Try to find appropriate mysqld process
mysqld_pid=`pidof $libexecdir/mysqld` # test if multiple pids exist
pid_count=`echo $mysqld_pid | wc -w`
if test $pid_count -gt 1 ; then
log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)"
exit 5
elif test -z $mysqld_pid ; then
if test -f "$lock_file_path" ; then
log_failure_msg "MySQL (Percona Server) is not running, but lock file ($lock_file_path) exists"
exit 2
fi
log_failure_msg "MySQL (Percona Server) is not running"
exit 3
else
log_failure_msg "MySQL (Percona Server) is running but PID file could not be found"
exit 4
fi
fi
;;
*)
# usage
basename=`basename "$0"`
echo "Usage: $basename {start|stop|restart|reload|force-reload|status} [ MySQL (Percona Server) options ]"
exit 1
;;
esac exit 0 3.创建zabbix库
mysql> create database zabbix character set utf8 collate utf8_bin; 给zabbix库授权并指定用户
mysql> grant all privileges on zabbix.* to zabbix@'localhost' identified by 'zabbix'; 4.在zabbix server主机上导入zabbix自带的三个表，路径在zabbix4.0.10源码目录database/mysql下后缀为.sql的三个文件
[root@zabbix4_clone:~]# ll /usr/local/src/zabbix-4.0.10/database/mysql/
total 7260
-rw-r--r-- 1 1001 mysql 3957065 Jun 26 04:20 data.sql
-rw-r--r-- 1 1001 mysql 1978341 Jun 26 04:20 images.sql
-rw-r--r-- 1 root root 15585 Jun 26 23:24 Makefile
-rw-r--r-- 1 1001 mysql 392 Jun 26 04:20 Makefile.am
-rw-r--r-- 1 1001 mysql 15711 Jun 26 04:20 Makefile.in
-rw-r--r-- 1 1001 mysql 140265 Jun 26 04:20 schema.sql 5.导入sql文件是有先后顺序的，先导schema.sql、images.sql、data.sql.
[root@ws_zabbix4:/usr/local/src]# cd zabbix-4.0.10/database/mysql/
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10/database/mysql]# ls
data.sql images.sql Makefile.am Makefile.in schema.sql
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10/database/mysql]# mysql -uzabbix -p'zabbix' zabbix < schema.sql
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10/database/mysql]# mysql -uzabbix -p'zabbix' zabbix < images.sql
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10/database/mysql]# mysql -uzabbix -p'zabbix' zabbix < data.sql 二、zabbix服务端的编译安装 1.安装编译环境所需要的依赖包组
#yum install gcc libxml2-devel libevent-devel net-snmp net-snmp-devel curl curl-devel php php-bcmath php-mbstring php-gettext php-session php-ctype php-xmlreader php-xmlwrer php-xml php-net-socket php-gd php-mysql -y 2.创建zabbix用户useradd zabbix -s /sbin/nologin 3.下载源码包，解压，编译 # wget https://sourceforge.net/projects/zabbix/files/ZABBIX%20Latest%20Stable/4.0.10/zabbix-4.0.10.tar.gz/download
# tar xf zabbix-4.0.10.tar.gz
4.编译安装zabbix4.0.10 ./configure --prefix=/usr/local/zabbix4.0.10 --enable-server --enable-agent --with-mysql --enable-ipv6 --with-net-snmp --with-libcurl --with-libxml2 --enable-java # 编译报错
...
checking for libperfstat 5.2.0.40 fileset... no
checking for libperfstat 5.3.0.60 fileset... no
checking for architecture... linux (linux-gnu)
checking for the linux kernel version... unknown family (3.10.0-957.el7.x86_64)
checking size of void *... 8
checking for mysql_config... /usr/local/mysql/bin/mysql_config
checking for main in -lperconaserverclient... no
configure: error: Not found perconaserverclient library # 查找perconaserverclient.so 文件
# [root@ws_zabbix4:/usr/local/src/zabbix-4.0.10]# locate perconaserverclient
/usr/local/Percona-Server-5.7.24_解压版/lib/libperconaserverclient.a
/usr/local/Percona-Server-5.7.24_解压版/lib/libperconaserverclient.so
/usr/local/Percona-Server-5.7.24_解压版/lib/libperconaserverclient.so.20
/usr/local/Percona-Server-5.7.24_解压版/lib/libperconaserverclient.so.20.3.11
/usr/local/Percona-Server-5.7.24_解压版/lib/pkgconfig/perconaserverclient.pc
/usr/local/bak_percona-server-5.7.24/lib/libperconaserverclient.a
/usr/local/bak_percona-server-5.7.24/lib/libperconaserverclient.so
/usr/local/bak_percona-server-5.7.24/lib/libperconaserverclient.so.20
/usr/local/bak_percona-server-5.7.24/lib/libperconaserverclient.so.20.3.11
/usr/local/bak_percona-server-5.7.24/lib/pkgconfig/perconaserverclient.pc
/usr/local/percona-server-5.7.14/lib/libperconaserverclient.a
/usr/local/percona-server-5.7.14/lib/libperconaserverclient.so
/usr/local/percona-server-5.7.14/lib/libperconaserverclient.so.20
/usr/local/percona-server-5.7.14/lib/libperconaserverclient.so.20.3.1
/usr/local/percona-server-5.7.14/lib/pkgconfig/perconaserverclient.pc
/usr/local/percona-server-5.7.24/lib/libperconaserverclient.a
/usr/local/percona-server-5.7.24/lib/libperconaserverclient.so
/usr/local/percona-server-5.7.24/lib/libperconaserverclient.so.20
/usr/local/percona-server-5.7.24/lib/libperconaserverclient.so.20.3.11
/usr/local/percona-server-5.7.24/lib/pkgconfig/perconaserverclient.pc # 生成软连接，问题解决
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10]# ln -s /usr/local/mysql/lib/libperconaserverclient.so /usr/lib64/mysql/libperconaserverclient.so
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10]# ln -s /usr/local/mysql/lib/libperconaserverclient.so /usr/lib/libperconaserverclient.so 5.执行make && make install
#make -j 4 && make install 6.拷贝启动脚本文件到/etc/init.d目录下
#cp misc/init.d/fedora/core/* /etc/init.d/ 7.拷贝过去的脚本需要修改下目录路径，server和agent都需要改
# cd /usr/local
# ln -s zabbix4.0.10 zabbix
#vim /etc/init.d/zabbix_server
22 BASEDIR=/usr/local
改成：
22 BASEDIR=/usr/local/zabbix 8.创建zabbix的日志存放路径和修改/usr/local/zabbix的所属主为zabbix
useradd zabbix -s /sbin/nologin
# mkdir /var/log/zabbix
# chown -R zabbix.zabbix /var/log/zabbix
# chown -R zabbix.zabbix /usr/local/zabbix/ 9.修改配置文件
[root@ws_zabbix4:/usr/local/src/zabbix-4.0.10]# egrep -v '^#|^$' /usr/local/zabbix/etc/zabbix_server.conf
LogFileSize=10 开启日志滚动，单位为MB、达到指定值之后就生成新的日志文件。
ListenPort=10051
LogFile=/var/log/zabbix/zabbix_server.log 修改日志存放路径
DBName=zabbix
DBUser=zabbix
DBSocket=/tmp/mysql.sock
DBPort=3306
StartPollers=30
StartTrappers=30
StartVMwareCollectors=20
VMwareFrequency=20
VMwarePerfFrequency=20
VMwareCacheSize=64M
VMwareTimeout=30
ListenIP=0.0.0.0
HousekeepingFrequency=12
CacheSize=256M
Timeout=15
AlertScriptsPath=/usr/local/zabbix/share/zabbix/alertscripts
ExternalScripts=/usr/local/zabbix/share/zabbix/externalscripts
LogSlowQueries=3000
StartProxyPollers=20 10.启动zabbix、并查看端口是否正常监听
# 通过启动脚本启动，看不到端口
# /etc/init.d/zabbix_server start
# 直接使用sbin下的可执行程序启动，定位错误
[root@ws_zabbix4:/usr/local]# /usr/local/zabbix/sbin/zabbix_server
[root@ws_zabbix4:/usr/local]# zabbix_server [40848]: cannot open "/var/log/zabbix/zabbix_server.log": [13] Permission denied chown -R zabbix.zabbix /var/log/zabbix/ # 再次启动成功
[root@ws_zabbix4:/usr/local]# netstat -tnlp | grep 10051
tcp 0 0 0.0.0.0:10051 0.0.0.0:* LISTEN 41018/zabbix_server 安装nginx
yum install -y nginx
# 修改php.ini参数
max_input_time=300 11.创建一个zabbix前端页面存放目录
# mkdir /data/www/vhosts/zabbix.chinasoft.com 12从zabbix解压包里面把php的所有文件拷贝到/var/www/html/zabbix目录下
# cp -ar frontends/php/* /data/www/vhosts/zabbix.chinasoft.com 13.通过网页来安装zabbix
默认账号Admin
密码 zabbix
nginx配置文件
[root@zabbix4_clone:~]# cat /usr/local/nginx/conf/vhost.d/zabbix.chinasoft.com.conf
server
{
listen ;
server_name zabbix.chinasoft.com;
index index.php index.html index.htm;
root /data/www/vhosts/zabbix.chinasoft.com/httpdocs;
access_log /data/www/logs/zabbix/access_zabbix.log combined;
error_log /data/www/logs/zabbix/error_zabbix.log; #expires
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
{
expires 30d;
} location ~ .*\.(js|css)?$
{
expires 24h;
} location /webstatus {
stub_status on;
access_log off;
} # location ~* ^/(attachments|images)/.*\.(php|php5)$
# {
# deny all;
# } location ~ .*\.php?$
{
fastcgi_pass 127.0.0.1:;
#fastcgi_pass unix:/tmp/php-fcgi.sock;
#fastcgi_pass php;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
} }
客户端启动脚本
[root@:~]# cat /etc/init.d/zabbix_agentd
#!/bin/bash
#
# chkconfig: -
# description: Starts and stops Zabbix Agent using chkconfig
# Tested on Fedora Core -
# Should work on all Fedora Core versions
#
# @name: zabbix_agentd
# @author: Alexander Hagenah <hagenah@topconcepts.com>
# @created: 18.04.
#
# Modified for Zabbix 2.0.
# May , Zabbix SIA
#
# Source function library.
. /etc/init.d/functions # Variables
# Edit these to match your system settings # Zabbix-Directory
BASEDIR=/usr/local/zabbix_agents_3.2.0 # Binary File
BINARY_NAME=zabbix_agentd # Full Binary File Call
FULLPATH=$BASEDIR/sbin/$BINARY_NAME # PID file
PIDFILE=/tmp/$BINARY_NAME.pid # Establish args
ERROR=
STOPPING= #
# No need to edit the things below
# # application checking status
if [ -f $PIDFILE ] && [ -s $PIDFILE ]
then
PID=`cat $PIDFILE` if [ "x$PID" != "x" ] && kill - $PID >/dev/null && [ $BINARY_NAME == `ps -e | grep $PID | awk '{print $4}'` ]
then
STATUS="$BINARY_NAME (pid `pidof $APP`) running.."
RUNNING=
else
rm -f $PIDFILE
STATUS="$BINARY_NAME (pid file existed ($PID) and now removed) not running.."
RUNNING=
fi
else
if [ `ps -e | grep $BINARY_NAME | head - | awk '{ print $1 }'` ]
then
STATUS="$BINARY_NAME (pid `pidof $APP`, but no pid file) running.."
else
STATUS="$BINARY_NAME (no pid file) not running"
fi
RUNNING=
fi # functions
start() {
if [ $RUNNING -eq ]
then
echo "$0 $ARG: $BINARY_NAME (pid $PID) already running"
else
action $"Starting $BINARY_NAME: " $FULLPATH
touch /var/lock/subsys/$BINARY_NAME
fi
} stop() {
echo -n $"Shutting down $BINARY_NAME: "
killproc $BINARY_NAME
RETVAL=$?
echo
[ $RETVAL -eq ] && rm -f /var/lock/subsys/$BINARY_NAME
RUNNING=
} # logic
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status $BINARY_NAME
;;
restart)
stop
sleep
start
;;
help|*)
echo $"Usage: $0 {start|stop|status|restart|help}"
cat <<EOF start - start $BINARY_NAME
stop - stop $BINARY_NAME
status - show current status of $BINARY_NAME
restart - restart $BINARY_NAME if running by sending a SIGHUP or start if not running
help - this screen EOF
exit
;;
esac exit
centos7.6下编译安装zabbix4.0.10长期支持版的更多相关文章
- centos7.2下快速安装zabbix4.0
本笔记是基于CentOS 7.2下最小化安装的操作系统搭建的Zabbix4.0环境,主要用于做一些企业路由器和交换机等设备的运行状态监控. 1.安装epel源 yum -y install epel- ...
- CentOS 7.2mini版本下编译安装php7.0.10+MySQL5.7.14+Nginx1.10
一.安装前的准备工作 1.yum update #更新系统 2.yum install gcc gcc-c++ autoconf automake cmake bison m4 libxml2 ...
- CentOS 7.2mini版本下编译安装php7.0.10+MySQL5.7.14+Nginx1.10.1
一.安装前的准备工作 1.yum update #更新系统 1.1)vi /etc/selinux/config # 禁止SELINUX,设置SELINUX=disabled 2.yum in ...
- CentOS 7.2下编译安装PHP7.0.10+MySQL5.7.14+Nginx1.10.1
一.安装前的准备工作 1.yum update #更新系统 2.yum install gcc gcc-c++ autoconf automake cmake bison m4 libxml2 ...
- centos7下编译安装php-7.0.15(PHP-FPM)
centos7下编译安装php-7.0.15(PHP-FPM) 一.下载php7源码包 http://php.net/downloads.php 如:php-7.0.15.tar.gz 二.安装所需依 ...
- CentOS7下编译安装redis-5.0.9
CentOS7下编译安装redis-5.0.9 本文地址http://yangjianyong.cn/?p=171转载无需经过作者本人授权 下载redis #code start wget https ...
- centos7.2下编译安装&&使用-git代码库
centos7.2下编译安装git Git简介 Git是一个分布式版本控制系统 Git vs SVN SVN是典型的集中式版本控制起,版本库集中存放在服务器,当我们用自己的电脑干活儿的时候,需要先从中 ...
- centos6编译安装zabbix3.0和中文支持整理文档
编者按: 最近公司部分业务迁移机房,为了更方便的监控管理主机资源,决定上线zabbix监控平台.运维人员使用2.4版本的进行部署,个人在业余时间尝鲜,使用zabbix3.0进行部署,整理文档如下,仅供 ...
- Centos7一键编译安装zabbix-4.0.2
##只针对centos7的系统有效,centos6无效,mysql zabbix用户:zabbix,密码:zabbix;建议用全新的centos7服务器 软件版本: (nginx-1.14.2.php ...
随机推荐
- Java精通并发-notify方法详解及线程获取锁的方式分析
wait(): 在上一次https://www.cnblogs.com/webor2006/p/11404521.html中对于无参数的wait()方法的javadoc进行了解读,而它是调用了一个参数 ...
- gdb调试（二）
继续研究gdb相关的调试技巧,话不多说进入正题: 查看运行时数据: 这个上节中已经用过了,这里就不多说了,比较简单 还是有上节中的simple.c例子,不过得稍微做一些修改为了使用这些命令: simp ...
- 【转】MarkDown添加图片的三种方式
原文:https://www.jianshu.com/p/280c6a6f2594 ----------------------------------------------------- 插图最基 ...
- P3225 [HNOI2012]矿场搭建[割点]
题目描述 煤矿工地可以看成是由隧道连接挖煤点组成的无向图.为安全起见,希望在工地发生事故时所有挖煤点的工人都能有一条出路逃到救援出口处.于是矿主决定在某些挖煤点设立救援出口,使得无论哪一个挖煤点坍塌之 ...
- win 10 VMware与Hyper-v共存
管理员身份运行命令提示符 cmd bcdedit /copy {current} /d "Windows10 no Hyper-V bcdedit /set {XXXXXXXX-XXXX-X ...
- RCNN,Fast RCNN,Faster RCNN 的前生今世：（3） SPP - Net
SPP-Net是出自2015年发表在IEEE上的论文-<Spatial Pyramid Pooling in Deep ConvolutionalNetworks for Visual Reco ...
- 面试官常问的20道Java题目（附答案）-来自Java1234
1. 以下代码的输出结果是(A) int i =3; i = i++; System.out.println(i); A .3 B.4 C.5 a=b++是先将b值赋值给a后b再自增. 2. Ma ...
- linux虚拟机互访
我们是按照一个小组有6个人在linux虚拟机中一个网卡配置三个ip:172.16.31.xxx; 192.168.180.xxx; 192.168.180.50+xxx;并且6台虚拟机还能够进行 ...
- Apache Kylin在4399大数据平台的应用
来自:AI前线(微信号:ai-front),作者:林兴财,编辑:Natalie作者介绍:林兴财,毕业于厦门大学计算机科学与技术专业.有多年的嵌入式开发.系统运维经验,现就职于四三九九网络股份有限公司, ...
- 在运维中的shell经验总结
来自良许Linux公众号 编写 脚本开头部分应有脚本功能说明.参数使用说明.作者姓名.创建/修改日期.版本信息,格式为: 脚本编写时,注意格式对齐,如所有的循环或者判断语句前后的语句进行对齐,以及ca ...