helm2.9.1报错

[root@master ~]# helm version
Client: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
E0801 14:37:59.972688 5854 portforward.go:331] an error occurred forwarding 36972 -> 44134: error forwarding port 44134 to pod e677d13e3e8e535e60edd0d134d05879201c16b0a22c27d81a6f2bbdd5f216cb, uid : exit status 1: 2018/08/01 14:37:55 socat[125663] E connect(5, AF=2 192.168.1.78:44134, 16): Connection refused
Error: cannot connect to Tiller

各种方法不行,降级为2.6.2

安装完tiller后报错

[root@master ~]# helm version
Client: &version.Version{SemVer:"v2.6.2", GitCommit:"be3ae4ea91b2960be98c07e8f73754e67e87963c", GitTreeState:"clean"}
Error: cannot connect to Tiller

查看更详细的信息

[root@master ~]# helm version --debug
[debug] Created tunnel using local port: '35132' [debug] SERVER: "localhost:35132" Client: &version.Version{SemVer:"v2.6.2", GitCommit:"be3ae4ea91b2960be98c07e8f73754e67e87963c", GitTreeState:"clean"}
[debug] context deadline exceeded
Error: cannot connect to Tiller

查看tiller

[root@master ~]# kubectl get service -n kube-system | grep tiller
tiller-deploy ClusterIP 10.106.125.65 <none> 44134/TCP 1h

指定server后测试,IP与prot是上面获取的

[root@master ~]# helm version --host 10.106.125.65:44134
Client: &version.Version{SemVer:"v2.6.2", GitCommit:"be3ae4ea91b2960be98c07e8f73754e67e87963c", GitTreeState:"clean"}
Server: &version.Version{SemVer:"v2.6.2", GitCommit:"be3ae4ea91b2960be98c07e8f73754e67e87963c", GitTreeState:"clean"}

发现指定host可以后,又升级2.9.1指定host

[root@master ~]# helm version --host 10.110.52.171:44134
Client: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
Server: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}

helm -h发现可以指定server

 export HELM_HOST=10.110.52.171:44134

再次测试没有问题

[root@master ~]# helm version
Client: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
Server: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}

Helm - Error: cannot connect to Tiller的更多相关文章

  1. Helm: Error: no available release name found

    如题,helm报这个错误 Helm: Error: no available release name found 错误的原因大概是因为 tiller没有正确的角色权限. 执行以下命令可解决这个问题. ...

  2. 关于error: cannot connect to daemon的解决办法

    执行adb devices时,如果出现以下错误: * daemon not running. starting it now on port 5037 * ADB server didn't ACK ...

  3. eclipse启动tomcat正常,但是debug启动报错FATAL ERROR in native method:JDWP No transports initialized,jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197) ERROR: transport error 202: connect failed:Connection timed out

    FATAL ERROR in native method:JDWP No transports initialized,jvmtiError=AGENT_ERROR_TRANSPORT_INIT(19 ...

  4. 解决Zabbix网页端Get value error: cannot connect to [[192.168.238.139]:10050]: [113] No route to host问题

    在安装配置完zabbix_agentd以后,网页端出现  Get value error: cannot connect to [[192.168.238.139]:10050]: [113] No ...

  5. Docker 报错 error during connect: Get pipe/docker_engine: The system cannot find the file specified. - 摘要: 本文讲的是Docker 报错 error during connect: Get pipe/dock

    error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.37/version: open //./pipe/docker_ ...

  6. ionic真机调试Android报错 - could not read ok from ADB Server * failed to start daemon * error: cannot connect to daemon

    在使用真机调试Android程序时,报错如下: could not read ok from ADB Server * failed to start daemon error: cannot con ...

  7. Appium——adb 启动问题Invalid argument: cannot open transport registration socketpair could not read ok from ADB Server failed to start daemon * error: cannot connect to daemon

    adb启动问题:Invalid argument: cannot open transport registration socketpair could not read ok from ADB S ...

  8. error: could not install *smartsocket* listener: Address already in use 下午8:49 ADB server didn't ACK 下午8:49 * failed to start daemon * 下午8:49 error: cannot connect to daemon

    在终端输入adb命令,出错如下: localhost:work zhangyg$ adb devices List of devices attached adb server version (32 ...

  9. docker 更新后出现 error during connect

    docker更新后出现 error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.39/containers/json: o ...

随机推荐

  1. Python 导入与注册

    背景 最近一直学习写一个POC扫描框架,但是不知道如何下手,正巧因为一些需要有朋友在研究POCSuite的实现原理,顺面蹭一些知识点,补一补Python基础的不足,为以后编写POC框架打地基. 导入 ...

  2. 重新学习python类

    之前觉得有java和c++的底子,对python的类没有认真研习,后面到了写项目的时候各种懵逼.终于决定彻底解决python的类问题. 一.python的类定义: class cls_name: de ...

  3. [Bootstrap] install Bootstrap framework in window 7 by npm

    Install with npm You can also install Bootstrap using npm: $ npm install bootstrap require('bootstra ...

  4. Xcode - 插件管理工具Alcatraz

    Alcatraz 1.简介 Alcatraz是一个能帮你管理Xcode插件丶模版及颜色配置的工具.它可以直接集成在Xcode的图形界面中,让你感觉就像在使用Xcode自带的功能一样. 2.安装和删除 ...

  5. 310实验室(六)CMake学习心得

    树形结构方式布局. OTL 中每一个文件中的CMakeLists.txt 有不同的作用:按查看文件的先后顺便进行分层理解, 根文件即第一次 中的.txt是 启用 CMAKE_MODULE_PATH模板 ...

  6. C++,一些常用的知识点

    用typedef定义数组.指针.结构等类型将带来很大的方便,不仅使程序书写简单而且使意义更为明确,因而增强了可读 性. C++中是用关键字typedef定义一个标识符来代表一种数据类型,该标识符可以象 ...

  7. maven修改本地仓库地址配置文件

    本地仓库是远程仓库的一个缓冲和子集,当你构建Maven项目的时候,首先会从本地仓库查找资源,如果没有,那么Maven会从远程仓库下载到你本地仓库.这样在你下次使用的时候就不需要从远程下载了.如果你所需 ...

  8. postgresql----SELECT

    示例1.简单查询 使用*查询表所有的字段,也可以指定字段名查询 test=# select * from tbl_insert; a | b ---+---- | sd | ff ( rows) te ...

  9. jquery 实现点击按钮后出现倒计时效果(用于实现发送手机验证码、邮箱验证码)

    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/ ...

  10. Oracle下select语句

    先看scott下自带的emp表 empno:编号  ename:名字  Job:职位  mgr:上级编号 hiredate:入职时间 sal:薪水 comm:奖金 deptno:部门编号 部门表dep ...