CentOS 6.4 电信ADSL 拨号连接的配置,亲测

.下载 rp-pppoe-3.8.tar.gz
http://down1.chinaunix.net/distfiles/rp-pppoe-3.8.tar.gz

.安装 rp-pppoe(对文件所在文件夹右键在终端打开)
解压 rp-pppoe-3.8.tar.gz :
#tar -zxf rp-pppoe-3.8.tar.gz

进入生成的目录:
#cd rp-pppoe-3.8

在所在目录内运行脚本 go:
#./go
将自动进行编译和安装

、网络配置 (红色为输入,蓝色为注释)
[root@Cheng liaojch3]# pppoe-setup             (输入 pppoe-setup )
Welcome to the Roaring Penguin PPPoE client setup.
First, I will run some checks on your system to make sure the PPPoE client is installed properly...
Looks good!
Now, please enter some information:

USER NAME
>>> Enter your PPPoE user name (default cz743720): cz743720              (输入上网账号)
INTERFACE
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0): eth0                 (选择你的网卡,默认为 eth0)

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped.
If you want the link to stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.

>>> Enter the demand value (default no): no                  (这里填 no 或 直接回车)

DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are doing and not modify your DNS setup.

>>> Enter the DNS information here: 202.96.128.86              (输入首选 DNS 地址,这个很重要,我一开始看网上是填 sever 表示自动获取DNS,但没有成功,
                                                                                                              后来我查了自己所在城市DNS地址,这里是广东“其他地区”的首选DNS,建议百度自己的DNS地址)

Please enter the IP address of your ISP's secondary DNS server.
If you just press enter, I will assume there is only one DNS server.
>>> Enter the secondary DNS server address here: 202.96.128.143                    (备用 DNS 地址,同样查一下)
PASSWORD
>>> Please enter your PPPoE password:                     (输入密码)
>>> Please re-enter your PPPoE password:                (再次输入密码)
FIREWALLING

Please choose the firewall rules to use.
Note that these rules are very basic.
You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security.
If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself.
Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc.
If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.

The firewall choices are:
 - NONE: This script will not set any firewall rules.  You are responsible for ensuring the security of your machine.
You are STRONGLY  recommended to use some kind of firewall rules.

 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
  for a LAN

>>> Choose a type of firewall (-):                      (选择防火墙,0表示不开启防火墙)

** Summary of what you entered **
Ethernet
Interface: eth0
User name: cz743720
Activate-on-demand: No
Primary DNS:202.96.128.86
Secondary DNS:202.96.128.143
Firewalling:NONE
>>> Accept these settings and adjust configuration files (y/n)? y              (填 y 确认)
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/resolv.conf  (But first backing it up to /etc/resolv.conf-bak)
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets  (But first backing it up to /etc/ppp/pap-secrets-bak)  (But first backing it up to /etc/ppp/chap-secrets-bak)
Congratulations, it should be all set up!
Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down.  Type 'pppoe-status' to see the link status.

[root@Cheng liaojch3]# pppoe-start              ( 用 pppoe-start 进行连接)
. Connected!                     (连接成功,你可以用 ping www.baiud.com 进行测试一下)

、上网命令(用 root 权限)
拨号上网     pppoe-start
断开上网     pppoe-stop
查看状态     pppoe-status

centos ppp拨号的更多相关文章

  1. sim900GPRS模块ppp拨号上网

    --------------------------------------------- 主机操作系统:Centos 6.5 交叉编译器环境:arm-linux-gcc-4.5.4 开发板平台: F ...

  2. 0710 mux协议的作用(ppp拨号时如何和gprs进行at指令交互)

    ppp拨号使gprs上网的同时如何和gprs模块进行at指令的交互,这是一个问题. 在linux中,ppp拨号上网是内核中支持的,只需要在内核配置中选上. ppp拨号的方式使gprs进行上网与at指令 ...

  3. GPRS模块在Linux平台上ppp拨号上网总结与心得

    linux平台的ppp拨号上网,(注明:这里只谈命令行拨号,用linux就要习惯和熟练使用命令行) 在网上常见的有三种方式:1.使用智能的ppp拨号软件wvdial:参考案例:本博客的<使用wv ...

  4. Linux下EC20实现ppp拨号(转)

    源: Linux下EC20实现ppp拨号 参考: 4g模块EC20+android6.0系统移植 OK6410开发板调试EC20通信模块 海思3531添加移远EC20 4g模块 将移远通信的EC20驱 ...

  5. linux下ppp拨号无线上网

    linux下用ppp上网需要两个程序:pppd和chat.ubuntu自带pppd和chat,可以使用man查看具体使用方法. 典型的ppp拨号需要准备几个文件: 1. pppd脚本. 2. chat ...

  6. LWIP network interface 网卡 初始化 以 STM32 为例子 后面会有 用 2G 或者4G 模块 用 PPP拨号的 形式 虚拟出网卡 所以先以 这个为 前提

    LWIP   network interface   网卡 初始化    以  STM32  为例子  后面会有 用  2G 或者4G 模块 用 PPP拨号的 形式  虚拟出网卡  所以先以 这个为 ...

  7. Linux Ubuntu系统之PPP拨号经验分享

    近期,工作需要,我负责开发PPP拨号模块. 说起拨号,算算时间,我已经做过2次了, 暴露年龄了,呵呵. 第一次是刚毕业做的PPOE拨号,给电信做拨号软件,在河北石家庄工作过一段时间,基于windows ...

  8. 嵌入式Linux系统---ppp拨号,4G模块上网【转】

    本文转载自:http://blog.csdn.net/qq562029186/article/details/65438553 4G模块PPP拨号上网 方法1 所需文件: xxx-chat-conne ...

  9. 在ARM-linux上实现4G模块PPP拨号上网【转】

    本文转载自:http://blog.csdn.net/zqixiao_09/article/details/52540887 在ARM平台上实现4G模块的PPP拨号上网,参考网上的资料和自己的理解,从 ...

  10. 关于PPP拨号 和 AT指令实现GPRS模块联网的疑问

    以下内容摘抄自互联网: ppp拨号 与 at命令的疑问 GPRS模块在Linux平台上ppp拨号上网总结与心得 以PPP拨号实现GPRS与因特网的数据通信的具体实现流程 问: 我刚接触GPRS,了解A ...

随机推荐

  1. static作用——The static effect

    1)在函数体内,一个被声明为静态的变量在这一函数被调用过程中维持其值不变(该变量存放在静态变量区). 2) 在模块内(但在函数体外),一个被声明为静态的变量可以被模块内所用函数访问,但不能被模块外其它 ...

  2. Node.js中url的详解

    var url = require('url');var str = 'http://zhufengnodejs:123@github.com:80/2016jsnode?name=zfpx& ...

  3. chrome浏览的下载扩展程序

    C:\Users\XXXX\AppData\Local\Google\Chrome\User Data\Default\Extensions 地址栏输入chrome://extensions/并回车打 ...

  4. asp.net中过滤器的两种写法

    1.写在一个单独的类库中在web.config中进行配置 <httpModules> <add name="" type="类的全名称,程序集的名称&q ...

  5. DownloadProvider调试

    由于身边的同事离职,最近又接手了一个模块,DownloadProvider, 也就是安卓中自带的下载管理.此模块的代码量比较少,但是最近阅读代码却发现还是由不少知识点的.之前同事在此模块做了一个关于D ...

  6. jvm-初探

    目录 1,Java体系结构 2.jvm执行引擎 3,ClassLoader的体系结构 4,java class文件 概述 其实,学java不算新手了,但是却感觉很多基本的知识,我们一开始也许是记住而不 ...

  7. [技术翻译]Guava-libraries(一): 用户指导

    用户指导 本文翻译自http://code.google.com/p/guava-libraries/wiki/GuavaExplained,由十八子将翻译,发表于博客园 http://www.cnb ...

  8. 汇编程序w=x*y+z-200

    DATA   SEGMENTX      DW  1000Y      DW  2000Z      DW  3000W      DW  2 DUP(?)DATA   ENDSCODE   SEGM ...

  9. 实时错误 '91' :对象变量或with块变量未设置

    大家这几天在做学生信息管理系统的时候,出现最多的应该就是这个问题了,“实时错误‘91’:对象变量或with块变量未设置”.如右图: 遇到这个问题,我们首先应该去参考MSDN,不过这时候MSDN似乎没有 ...

  10. 纯蓝ICON_学习教程