/usr/include/asm/errno.h

#define EPERM 1 /* Operation not permitted */操作不允许

  #define ENOENT 2 /* No such file or directory */文件/路径不存在

  #define ESRCH 3 /* No such process */进程不存在

  #define EINTR 4 /* Interrupted system call */中断的系统调用

  #define EIO 5 /* I/O error */I/O错误

  #define ENXIO 6 /* No such device or address */设备/地址不存在

  #define E2BIG 7 /* Arg list too long */参数列表过长

  #define ENOEXEC 8 /* Exec format error */执行格式错误

  #define EBADF 9 /* Bad file number */错误文件编号

  #define ECHILD 10 /* No child processes */子进程不存在

  #define EAGAIN 11 /* Try again */重试

  #define ENOMEM 12 /* Out of memory */内存不足

  #define EACCES 13 /* Permission denied */无权限

  #define EFAULT 14 /* Bad address */地址错误

  #define ENOTBLK 15 /* Block device required */需要块设备

  #define EBUSY 16 /* Device or resource busy */设备或资源忙

  #define EEXIST 17 /* File exists */文件已存在

  #define EXDEV 18 /* Cross-device link */跨设备链路

  #define ENODEV 19 /* No such device */设备不存在

  #define ENOTDIR 20 /* Not a directory */路径不存在

  #define EISDIR 21 /* Is a directory */是路径

  #define EINVAL 22 /* Invalid argument */无效参数

  #define ENFILE 23 /* File table overflow */文件表溢出

  #define EMFILE 24 /* Too many open files */打开的文件过多

  #define ENOTTY 25 /* Not a typewriter */非打字机

  #define ETXTBSY 26 /* Text file busy */文本文件忙

  #define EFBIG 27 /* File too large */文件太大

  #define ENOSPC 28 /* No space left on device */设备无空间

  #define ESPIPE 29 /* Illegal seek */非法查询

  #define EROFS 30 /* Read-only file system */只读文件系统

  #define EMLINK 31 /* Too many links */链接太多

  #define EPIPE 32 /* Broken pipe */管道破裂

  #define EDOM 33 /* Math argument out of domain of func */参数超出函数域

  #define ERANGE 34 /* Math result not representable */结果无法表示

  #define EDEADLK 35 /* Resource deadlock would occur */资源将发生死锁

  #define ENAMETOOLONG 36 /* File name too long */文件名太长

  #define ENOLCK 37 /* No record locks available */没有可用的记录锁

  #define ENOSYS 38 /* Function not implemented */函数未实现

  #define ENOTEMPTY 39 /* Directory not empty */目录非空

  #define ELOOP 40 /* Too many symbolic links encountered */遇到太多符号链接

  #define EWOULDBLOCK EAGAIN /* Operation would block */操作会阻塞

  #define ENOMSG 42 /* No message of desired type */没有符合需求类型的消息

  #define EIDRM 43 /* Identifier removed */标识符已删除

  #define ECHRNG 44 /* Channel number out of range */通道编号超出范围

  #define EL2NSYNC 45 /* Level 2 not synchronized */level2不同步

  #define EL3HLT 46 /* Level 3 halted */3级停止

  #define EL3RST 47 /* Level 3 reset */3级重置

  #define ELNRNG 48 /* Link number out of range */链接编号超出范围

  #define EUNATCH 49 /* Protocol driver not attached */协议驱动程序没有连接

  #define ENOCSI 50 /* No CSI structure available */没有可用的CSI结构

  #define EL2HLT 51 /* Level 2 halted */2级停止

  #define EBADE 52 /* Invalid exchange */无效交换

  #define EBADR 53 /* Invalid request descriptor */无效请求描述

  #define EXFULL 54 /* Exchange full */交换完全

  #define ENOANO 55 /* No anode */无阳极

  #define EBADRQC 56 /* Invalid request code */无效请求码

  #define EBADSLT 57 /* Invalid slot */无效插槽

  #define EDEADLOCK EDEADLK

  #define EBFONT 59 /* Bad font file format */错误的字体文件格式

  #define ENOSTR 60 /* Device not a stream */设备不是流

  #define ENODATA 61 /* No data available */无数据

  #define ETIME 62 /* Timer expired */计时器到期

  #define ENOSR 63 /* Out of streams resources */流资源不足

  #define ENONET 64 /* Machine is not on the network */机器不在网络上

  #define ENOPKG 65 /* Package not installed */包未安装

  #define EREMOTE 66 /* Object is remote */对象是远程

  #define ENOLINK 67 /* Link has been severed */链接正在服务中

  #define EADV 68 /* Advertise error */广告错误

  #define ESRMNT 69 /* Srmount error */?

  #define ECOMM 70 /* Communication error on send */发送过程中通讯错误

  #define EPROTO 71 /* Protocol error */协议错误

  #define EMULTIHOP 72 /* Multihop attempted */多跳尝试

  #define EDOTDOT 73 /* RFS specific error */RFS特定错误

  #define EBADMSG 74 /* Not a data message */不是数据类型消息

  #define EOVERFLOW 75 /* Value too large for defined data type */对指定的数据类型来说值太大

  #define ENOTUNIQ 76 /* Name not unique on network */网络上名字不唯一

  #define EBADFD 77 /* File descriptor in bad state */文件描述符状态错误

  #define EREMCHG 78 /* Remote address changed */远程地址改变

  #define ELIBACC 79 /* Can not access a needed shared library */无法访问需要的共享库

  #define ELIBBAD 80 /* Accessing a corrupted shared library */访问损坏的共享库

  #define ELIBSCN 81 /* .lib section in a.out corrupted */库部分在a.out损坏

  #define ELIBMAX 82 /* Attempting to link in too many shared libraries */试图链接太多的共享库

  #define ELIBEXEC 83 /* Cannot exec a shared library directly */不能直接运行共享库

  #define EILSEQ 84 /* Illegal byte sequence */非法字节序

  #define ERESTART 85 /* Interrupted system call should be restarted */应重新启动被中断的系统调用

  #define ESTRPIPE 86 /* Streams pipe error */流管错误

  #define EUSERS 87 /* Too many users */用户太多

  #define ENOTSOCK 88 /* Socket operation on non-socket */在非套接字上进行套接字操作

  #define EDESTADDRREQ 89 /* Destination address required */需要目的地址

  #define EMSGSIZE 90 /* Message too long */消息太长

  #define EPROTOTYPE 91 /* Protocol wrong type for socket */错误协议类型

  #define ENOPROTOOPT 92 /* Protocol not available */协议不可用

  #define EPROTONOSUPPORT 93 /* Protocol not supported */不支持协议

  #define ESOCKTNOSUPPORT 94 /* Socket type not supported */不支持套接字类型

  #define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */操作上不支持传输端点

  #define EPFNOSUPPORT 96 /* Protocol family not supported */不支持协议族

  #define EAFNOSUPPORT 97 /* Address family not supported by protocol */协议不支持地址群

  #define EADDRINUSE 98 /* Address already in use */地址已被使用

  #define EADDRNOTAVAIL 99 /* Cannot assign requested address */无法分配请求的地址

  #define ENETDOWN 100 /* Network is down */网络已关闭

  #define ENETUNREACH 101 /* Network is unreachable */网络不可达

  #define ENETRESET 102 /* Network dropped connection because of reset */网络由于复位断开连接

  #define ECONNABORTED 103 /* Software caused connection abort */软件导致连接终止

  #define ECONNRESET 104 /* Connection reset by peer */连接被对方复位

  #define ENOBUFS 105 /* No buffer space available */没有可用的缓存空间

  #define EISCONN 106 /* Transport endpoint is already connected */传输端点已连接

  #define ENOTCONN 107 /* Transport endpoint is not connected */传输端点未连接

  #define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */传输端点关闭后不能在发送

  #define ETOOMANYREFS 109 /* Too many references: cannot splice */太多的引用:无法接合

  #define ETIMEDOUT 110 /* Connection timed out */连接超时

  #define ECONNREFUSED 111 /* Connection refused */连接被拒绝

  #define EHOSTDOWN 112 /* Host is down */主机已关闭

  #define EHOSTUNREACH 113 /* No route to host */无法路由到主机

  #define EALREADY 114 /* Operation already in progress */操作已在进程中

  #define EINPROGRESS 115 /* Operation now in progress */进程中正在进行的操作

  #define ESTALE 116 /* Stale NFS file handle */

  #define EUCLEAN 117 /* Structure needs cleaning */

  #define ENOTNAM 118 /* Not a XENIX named type file */

  #define ENAVAIL 119 /* No XENIX semaphores available */

  #define EISNAM 120 /* Is a named type file */

  #define EREMOTEIO 121 /* Remote I/O error */

  #define EDQUOT 122 /* Quota exceeded */

  #define ENOMEDIUM 123 /* No medium found */

  #define EMEDIUMTYPE 124 /* Wrong medium type */

errno错误码及含义(中文)的更多相关文章

  1. 写给初学者的Linux errno 错误码机制

    不同于Java的异常处理机制, 当你使用C更多的接触到是基于错误码的异常机制, 简单来说就是当调用的函数发生异常时, 程序不会跳转到一个统一处理异常的地方, 取而代之的是返回一个整型错误码. 可能会有 ...

  2. errno 错误码

    转自:http://baike.baidu.com/link?url=uX-q7K-TTL-5AFNT-hjhAP6fvgAwvsNkIMqJqJ3GEspYgtQXsovEEzpqmQ3ZmAgql ...

  3. HTTP协议中的1xx,2xx,3xx,4xx,5xx状态码分别表示什么,列举常见错误码及含义

    转自:http://m.blog.csdn.net/blog/u013857407/21741847 HTTP协议状态码,是指在HTTP协议运作中由客户端发出请求连接,服务端建立连接,客户端发出HTT ...

  4. Linux错误码的含义

    C Name Value Description EPERM 1 Operation not permitted ENOENT 2 No such file or directory ESRCH 3 ...

  5. CMPP错误码说明

    与中国移动代码的对应关系. MI::zzzzSMSC返回状态报告的状态值为EXPIREDMJ:zzzzSMSC返回状态报告的状态值为DELETEDMK:zzzzSMSC返回状态报告的状态值为UNDEL ...

  6. 转!!CMPP 网关错误码说明

    http://www.163duanxin.com/msg/1753.htm CMPP错误码说明   与中国移动代码的对应关系. MI::zzzzSMSC返回状态报告的状态值为EXPIREDMJ:zz ...

  7. errno.h 错误码描述.

    描述:一般说的Linux源码的目录,默认是基于 /usr/include/ 的. 使用 char *strerror(int errnum); 函数打印错误代码的描述.我简单对比了一下,发现描述大体一 ...

  8. 【Fine原创】常见的HTTP错误码的具体含义整理

    常见的HTTP错误码的具体含义     "100" : Continue   客户端应当继续发送请求. "101" : witching Protocols   ...

  9. iOS之网络请求及各类错误代码含义总结(包含AFN错误码大全)

    转自http://blog.csdn.net/wangyanchang21/article/details/50932191 在很多时候都会遇到错误, 还会带有一些 Error Code , 比如在各 ...

随机推荐

  1. hit-testing机制介绍

    1.简介 寻找处理触摸事件的view的过程为hit-testing,找到的能够处理触摸事件的view叫做hit-test view. 2.机制介绍 假设下图为我们的手机屏幕,当我们假设点击了view ...

  2. MUI 页面刷新及页面传值问题

    一.页面刷新问题 1.父页面A跳转到子页面B,B页面修改数据后再跳回A页面,刷新A页面数据 (1).父页面A代码 window.addEventListener("pageflowrefre ...

  3. 步骤一:下载jdk并安装和配置java环境变量

    1.下载JDk地址: http://download.eclipse.org/oomph/jre/?vm=1_1_7_0_64_0 2.进入下载页面(下载的是jdk7),点击:Oracle JDK1. ...

  4. hdu 1081(最大子矩阵)

    To The Max Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)Total ...

  5. 利用js生成读取页面数据并导出为excel

    //核心,js部分 */var navs = new Vue({ el: '#navs', data: { navs: [] }, ready: function () { this.$http.ge ...

  6. gulp之压缩css,less转css,浏览器实时刷新【原创】

    gulp入门 gulp浏览器实时同步 首先要下载对应的插件包: gulp-less包:cnpm install gulp-less --save-dev gulp-connect包:cnpm inst ...

  7. 简单的WSGI server

    参考:https://ruslanspivak.com/lsbaws-part1/ 简单的WSGI server server程序 webserver.py # Tested with Python ...

  8. java 中整数类型的进制转换

    int a=10; Integer.toBinaryString(a); //转换成2进制Integer.toOctalString(a);  //转换成8进制Integer.toHexString( ...

  9. HDU 3485【101】 51nod 1668【010】 joj 2171【111】动态规划

    有一个只含0和1的长度为n的串,问不含有101的所有串的个数. ——不存在连续的101.010.111的字符串数量 HDU:https://cn.vjudge.net/problem/HDU-3485 ...

  10. 洛谷——P2381 圆圆舞蹈

    P2381 圆圆舞蹈 题目描述 熊大妈的乃修在时针的带领下,围成了一个圆圈舞蹈,由于没有严格的教育,奶牛们之间的间隔不一致. 奶牛想知道两只最远的奶牛到底隔了多远.奶牛A到B的距离为A顺时针走和逆时针 ...