[转]Why you shouldn't use set (and what you should use instead)
Why you shouldn't use set (and what you should use instead) --- stl::set和sorted ector对比
Matt Austern
Everything in the standard C++ library is there for a reason, but it isn't always obvious what that reason is. The
standard isn't a tutorial; it doesn't distinguish between basic, everyday components and ones that are there only for
rare and specialized purposes.
One example is the Associative Container std::set (and its siblings map, multiset, and multimap).
Sometimes it does make sense to use a set, but not as often as you might think. The standard library provides other
tools for storing and looking up data, and often you can do just as well with a simpler, smaller, faster data structure.
What is a set?
A set is an STL container that stores values and permits easy lookup. For example, you might have a set of
strings:
std::set<std::string> S;
You can add a new element by writing
S.insert("foo");.
A set may not contain more than one element with the same key, so insert won't add anything if S already
contains the string "foo"; instead it just looks up the old element. The return value includes a status code
indicating whether or not the new element got inserted.
As with all STL containers, you can step through all of the elements in a set using the set's iterators. S.begin()
returns an iterator that points to S's first element, and S.end() returns an iterator that points immediately after S's
last element. The elements of a set are always sorted in ascending order-which is why insert doesn't have an
argument telling it where the new element is supposed to be put. The new element automatically gets inserted in the
correct location.
What it means for set to be an Associative Container is that you can look up a value, by writing
i = S.find("foo");.
If the lookup is successful then find returns an iterator that points to the appropriate element in the set. If there
is no such element then find returns the iterator S.end(), which doesn't point to anything.
What if you need the elements to be arranged in something other than ascending order, or if you're creating a set of
elements for which "less than" isn't defined? In that case you can use set's second template parameter, a function
object that determines which of two objects is supposed to come before the other. By default it is std::less<T>,
meaning that the smaller element comes first. You can create a set of strings stored in reverse order, though, by
using a different function object:
std::set<std::string, std::greater<std::string> > S,
or you can create a set of strings in case-insensitive order by writing your own function object1:
struct less_nocase {
static bool compare_chars(char x, char y) {
return std::toupper(x) < std::toupper(y);
}
bool operator()(const string& x, const string& y) const {
return std::lexicographical_compare(x.begin(), x.end(),
y.begin(), y.end(),
Compare_chars);
}
};
std::set<std::string, less_nocase> S;
1Warning: Case-insensitive string comparison is more complicated than it looks, and this code is subtly wrong. In a
future column I'll explain what's wrong with it, and how to rewrite it correctly.
Even more generally you can store some complicated data structure, and use only a piece of it for comparisons:
struct Client {
unsigned long id;
string last_name, first_name;
...
};
struct id_compare {
bool operator()(const Client& x, const Client& y) const {
return x.id < y.id;
}
};
std::set<Client, id_compare> clients;
That's not all there is to set, of course. It has all the usual member functions of an STL container, and some special
member functions of its own. The basic purpose, though, is managing a collection of elements that can be looked up
by key. (The Associative Container map is very similar, except that in a set the elements are their own keys while
in a map the elements are pairs; the first member of each pair is the key, and the second is some value that's
associated with the key.)
What's wrong?
Nothing is wrong, precisely-just incomplete. Contrary to appearances, I still haven't given any good reason why you
would ever want to use a set. You don't need any special data structures or member functions to insert or look up
elements, after all. If you've got any STL container C, you can find an element in it with the generic find
algorithm:
i = std::find(C.begin(), C.end(), "foo");
Just like with the set::find member function, this will return an iterator that points to the element you're looking
for, or C.end() if there is no such element. There's really only one important difference: std::find performs a
linear search, so the time it takes is proportional to N (where N is the number of elements you're looking through),
while the time taken by set::find is proportional to log N. That is, if N is large, set::find is much faster.
The real point of set, and the other Associative Containers in the standard C++ library, is that they make specific
performance guarantees: It's guaranteed that the time to find an element is proportional to log N, where N is the
number of elements in the container, and also that the time to insert an element is proportional to log N. There are
also specific guarantees about exception safety and iterator invalidation; those guarantees, too, are sometimes
important.
If you don't need all of those properties, though, you'll be paying for something you don't use. A data structure that
supports fast insertion and fast lookup is necessarily complicated; set is typically implemented as a red-black tree,
which has substantial space and time overhead. Each element in a red-black tree requires more than three extra
words of storage (a color marker, and pointers to two children and a parent). Insertions require tree rebalancing, and
lookup and iteration require pointer chasing.
If you really need insertion and lookup in guaranteed log N time, then set is a sensible choice. If you don't, though,
then you have other options. Suppose, for example, you're willing to relax the guarantee of insertion in log N time.
That's not so unlikely; chances are you'll need to look things up much more often than you'll need to insert them.
Red-black trees aren't the only way to organize data that permits lookup in logarithmic time. One of the basic
algorithms of computer science is binary search, which works by successively dividing a range in half. Binary
search is log N and it doesn't require any fancy data structures, just a sorted collection of elements. Binary search is
part of the STL-not as a container, but as the generic algorithms lower_bound, upper_bound,
equal_range, and binary_search. In practice, lower_bound tends to be most useful. If [first,
last) is a range of iterators and if the elements in the range are sorted in ascending, then
std::lower_bound(first, last, x);
returns an iterator pointing to an element that's equivalent to x (if such an element exists), or, if there is no such
element, an iterator pointing to the position where the element would have been. You can use whatever data
structure is convenient, so long as it provides STL iterator; usually it's easiest to use a C array, or a vector.
Both std::lower_bound and set::find take time proportional to log N, but the constants of proportionality
are very different. Using g++ on a 450 MHz Pentium III it takes 0.9 seconds to perform a million lookups in a
sorted vector<double> of a million elements, and almost twice as long, 1.71 seconds, using a set. Moreover,
the set uses almost three times as much memory (48 million bytes) as the vector (16.8 million).
If you need to insert new elements, of course, you have to insert them in the proper position-lower_bound will
fail badly if it is given a range that isn't sorted. That position is exactly what lower_bound returns:
template <class Vector, class T>
void insert_into_vector(Vector& v, const T& t) {
typename Vector::iterator i
= std::lower_bound(v.begin(), v.end(), t);
if (i == v.end() || t < *i)
V.insert(i, t);
}
This helper function checks, before inserting t, to make sure that it isn't already there. If you wish to allow
duplicate elements, as multiset does, then you should omit the check.
Using a sorted vector instead of a set gives you faster lookup and much faster iteration, but at the cost of slower
insertion. Insertion into a set, using set::insert, is proportional to log N, but insertion into a sorted vector,
using insert_into_vector, is proportional to N. Whenever you insert something into a vector,
vector::insert has to make room by shifting all of the elements that follow it. On average, if you're equally
likely to insert a new element anywhere, you'll be shifting N/2 elements.
There are two special cases where you won't pay such a severe penalty. First, if the elements you insert always go at
the end-that is, if you're inserting values in order-then vector::insert won't ever have to shift any elements.
(And "nearly in order" is nearly as good as "in order"!) Second, you may be able to fill the entire sorted collection
before you look anything up in it; a spell check program, for example, starts out with a large dictionary and only
occasionally adds new words. The vector doesn't have to be sorted until you need to look something up in it, so you
can quickly build an unordered collection, inserting elements with vector::push_back instead of
insert_into_vector, and then sort the vector all at once with
std::sort(v.begin(), v.end());.
It may sometimes be convenient to bundle all of this together into a small container adaptor. In the interest of space
I'll omit the "boilerplate" that's needed to support the complete STL container interface, but the essential parts are
simple.
template <class T, class Compare = std::less<T> >
struct sorted_vector {
using std::vector;
using std::lower_bound;
vector<T> V;
Compare cmp;
typedef typename vector<T>::iterator iterator;
typedef typename vector<T>::const_iterator const_iterator;
iterator begin() { return V.begin(); }
iterator end() { return V.end(); }
const_iterator begin() const { return V.begin(); }
const_iterator end()
const { return V.end(); }
...
sorted_vector(const Compare& c = Compare()) : V(), cmp(c) {}
template <class InputIterator>
sorted_vector(InputIterator first, InputIterator last, Const Compare& c = Compare()): V(first, last), cmp(c)
{
std::sort(begin(), end(), cmp);
}
...
iterator insert(const T& t) {
iterator i = lower_bound(begin(), end(), t, cmp);
if (i == end() || cmp(t, *i))
V.insert(i, t);
return i;
}
const_iterator find(const T& t) const {
const_iterator i = lower_bound(begin(), end(), t, cmp);
return i == end() || cmp(t, *i) ? end() : i;
}
};
This class does not satisfy the requirements of a standard Associative Container, since the complexity of insert is
O(N) rather than O(log N), but otherwise it is almost a drop-in replacement for set.
What is set good for?
The point isn't that set is useless-there are times when it's the right choice. We can finally write down the
conditions when it's a better choice than sorted_vector or the equivalent:
- The collection can potentially grow so large that the difference between O(N) and O(log N) is important.
- The number of lookups is the same order of magnitude as the number of insertions; there aren't so few
insertions that insertion speed is irrelevant.
- Elements are inserted in random order, rather than being inserted in order.
- Insertions and lookups are interleaved; we don't have distinct insertion and lookup phases.
Sometimes all four of these conditions are true. If they are, you should use set; that's what it's designed for. If any
of them are false, though, using such a complicated data structure would be a waste and you could get better
performance by using a simple sorted vector.
Every component in the standard C++ library is there because it's useful for some purpose, but sometimes that
purpose is narrowly defined and rare. As a general rule you should always use the simplest data structure that meets
your needs. The more complicated a data structure, the more likely that it's not as widely useful as it might seem.
随机推荐
- 14-EasyNetQ之用Future Publish发布预定中事件
很多商业流程需要事件在未来的时间按照预定时间发布.例如,在初次与客户接触后,可以在未来某个时间去电话回访客户.EasyNetQ可以用它的Future Publish功能帮你实现这个功能.举例:这里我们 ...
- 张超超OC基础回顾02_成员变量(属性),局部变量,全局变量的区别
成员变量: 写在类声明的大括号中的变量, 我们称之为 成员变量(属性, 实例变量) 成员变量只能通过对象来访问 注意: 成员变量不能离开类, 离开类之后就不是成员变量 成员变量不能在定义的同时进行初始 ...
- OpenCV---resize
转自http://www.cnblogs.com/korbin/p/5612427.html 在图像处理过程中,有时需要把图像调整到同样大小,便于处理,这时需要用到图像resize() 原函数void ...
- Mac下切换Python版本
Mac下有多个版本的Python时,需要进行版本切换.我使用的是anaconda,在终端下进行包安装时,默认Python版本是MacOS自带的Python,需要进行手动的版本切换. # 将anacon ...
- python之连接oracle数据库
环境: windows,python2.7 1.下载cx_Oracle 在windows下不要使用easy_install或者pip,因为这样安装不会同步环境,并报错: distutils.error ...
- 第十八课 Gazebo仿真器
1.Gazebo概述 在Gazebo中的模拟效果是非常好的. 它的特性 Dynamics Simulation 直接控制物理引擎参数 Building Editor 无需代码即可在Gazebo中创建机 ...
- (转)jQuery基础之选择器
原文地址: http://www.cnblogs.com/webmoon/p/3169360.html 选择器是jQuery的根基,在jQuery中,对事件处理.遍历DOM和Ajax操作都依赖于选择器 ...
- Python - selenium_WebDriver 页面元素操作
代码是自己写了 python WebDriver 页面操作的常用方法. from selenium import webdriver import time driver = webdriver.F ...
- .net 特性 Attribute
public sealed class RemarkAttribute : Attribute { public string Remark { get; set; } // 构造函数 public ...
- 简单接触oracle数据库nvl函数decode函数
SQL语句的DECODE()和NVL()函数用法 SELECT DECODE(choose_tool,0,'宝马',1,'电动车',2,'自行车','步行') AS my_tool FROM dat ...