CenOS配置VSFTP服务器
1 Linux FTP服务器分类:
- wu-ftp
- proftp=profession ftp
- vsftp=very security ftp
2 安装vsftp
yum install vsftp
3 配置文件:
/etc/vsftpd/vsftpd.conf //主配置文件
/etc/vsftpd.ftpusers //被禁止登录FTP的用户文件
/etc/vsftpd.user_list //允许登录FTP的用户文件
4 访问方式
匿名登录
帐号登录
启动FTP服务器:
#service vsftpd restart
5 配置vsftp服务器
[root@localhost ~]# vi /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to lightnear FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
pam_service_name=vsftpd
userlist_enable=YES
userlist_deny=NO
local_root=/var/public_root
tcp_wrappers=YES
use_localtime=YES
6 增加FTP帐户
[root@localhost ~]# useradd cent -s /sbin/nologin
[root@localhost ~]# passwd cent
7 编辑user_list文件,允许cent用户访问FTP
[root@localhost ~]# vi /etc/vsftpd/user_list
# vsftpd userlist
# If userlist_deny=NO, only allow users in this file
# If userlist_deny=YES (default), never allow users in this file, and
# do not even prompt for a password.
# Note that the default vsftpd pam config also checks /etc/vsftpd/ftpusers
# for users that are denied.
root
bin
daemon
adm
lp
sync
shutdown
halt
news
uucp
operator
games
nobody
cent
8 建立我们的根目录,并设置访问权限
[root@localhost ~]# mkdir /var/public_root
[root@localhost ~]# chown -R cent /var/public_root
[root@localhost ~]# chmod -R /var/public_root
9 开启vsftpd服务
[root@localhost ~]# service vsftpd start
Starting vsftpd for vsftpd: [ OK ]
10默认开启vsftp服务
[root@localhost var]# chkconfig vsftpd on
CenOS配置VSFTP服务器的更多相关文章
- asp.net core 简单部署之FTP配置(CentOS 7.0安装配置Vsftp服务器)
配置过程原文地址:http://www.osyunwei.com/archives/9006.html 坑和结果 正确的跟着这个内容走,是靠谱的. 我自己给自己踩了个坑,请参照文章的朋友注意第七条:七 ...
- CentOS 7.0安装配置Vsftp服务器
一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙. 1.关闭firewall: systemctl stop fi ...
- 配置VSFTP服务器
一.Linux FTP服务器分类: <1>wu-ftp <2>proftp=profession ftp <3>vsftp=very security ftp ...
- CentOS 7.0安装配置Vsftp服务器步骤详解
安装Vsftp讲过最多的就是在centos6.x版本中了,这里小编看到有朋友写了一篇非常不错的CentOS 7.0安装配置Vsftp服务器教程,下面整理分享给各位. 一.配置防火墙,开启FTP服务器需 ...
- 【转发】【linux】【ftp】CentOS 7.0安装配置Vsftp服务器
adduser -d /var/www/android -g ftp -s /sbin/nologin ftp2 一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.0默认使用的是firew ...
- CentOS 7.2安装配置Vsftp服务器
一.配置防火墙,开启FTP服务器需要的端口 CentOS 7.2默认使用的是firewall作为防火墙,这里改为iptables防火墙. 1.关闭firewall: systemctl stop fi ...
- CentOS安装配置VSFTP服务器
{:toc} 前言 本文用最简单的方式创建FTP服务,即创建一个大家都可以访问的目录,没有涉及到各种权限限制. 创建目录 在安装配置ftp之前,首先创建一个目录,用来做ftp根目录.我创建的是/hom ...
- CentOS配置VSFTP服务器
[1] 安装VSFTP [root@localhost ~]# yum -y install vsftpd [2] 配置vsftpd.conf文件 [root@localhost ~]# vi /et ...
- 1.配置vsftp服务器
1.安装 vsftp yum -y install ftp vsftpd 2.查看配置文件所在路径 rpm -qc vsftpd 3.备份vsftpd文件 cp vsftpd.conf vsftpd. ...
随机推荐
- Hanoi汉诺塔问题——递归与函数自调用算法
题目描述 Description 有N个圆盘,依半径大小(半径都不同),自下而上套在A柱上,每次只允许移动最上面一个盘子到另外的柱子上去(除A柱外,还有B柱和C柱,开始时这两个柱子上无盘子),但绝不允 ...
- UI-text-field
//初始化textfield并设置位置及大小 UITextField *text = [[UITextField alloc]initWithFrame:CGRectMake(20, 20, 130, ...
- Brackets + Sass 学习心得
大家知道Brackets是一个可以实时浏览html页面修改效果的工具,对于前段开发人员应该不会陌生,有了它,布局页面再也不是什么困难了, 目前为止已经更新到1.6了. 下载最新版可以到官方网: htt ...
- E: GPG error: http://mirrors.oschina.net trusty-backports InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)
E: GPG error: http://mirrors.oschina.net trusty-backports InRelease: Clearsigned file isn't valid, g ...
- Linux通过XAMPP集成软件包搭建LAMPP环境
前面介绍过一篇“Linux手动搭建LAMP环境”,今天再来整理一篇“Linux通过XAMPP集成软件包搭建LAMPP环境”. 其实当初整理通过XAMPP集成软件包搭建LAMPP环境的原因是这样的: 自 ...
- kindle网络爬虫续集
简单介绍: 这次我们要爬的网页是:Kindle商店中的今日特价书,其中每周/每月特价书同理,就不再重复了选择这个网页的原因有两个:一是实用,很多人都会经常去看看Kindle特价书有没有自己喜欢的:二是 ...
- oracle11g 卸载和安装(win7,32位)
完全卸载oracle11g步骤:1. 开始->设置->控制面板->管理工具->服务 停止所有Oracle服务.2. 开始->程序->Oracle - OraDb11 ...
- 数据查找之80-20原则的JavaScript代码实现
作为前端开发人员,无论在工作还是找工作(笔试/面试),或多或少会涉及一些数据结构的知识. 数据结构即计算机存储和组织数据的方式. 常用的结构:数组.栈.队列.链表.树.图.堆和散列表 关于数据,我们常 ...
- 2012-11-17 12:28 用MFC实现的计算器(详细版)
这篇文章里通过计算器的简单实现,让大家能够了解一般对话框应用程序开发的基本流程 要求:编写简单的计算器应用程序,要求利用按钮进行加.减.乘,除操作,在对话框输出计算机结果. 下面结合操作步骤,讲解对话 ...
- DOM操作-克隆元素
代码: ———————————————————————————— <script type="text/javascript"> //克隆元素 ...