mod_cluster启用https协议的步骤

1、生成SSL证书与私钥

Generate Private Key on the Server Running Apache + mod_ssl First, generate a private key on the Linux server that runs Apache webserver using openssl command as shown below.

[root@s4-app-dev jbossuser]# mkdir /etc/httpd/conf/certs
[root@s4-app-dev jbossuser]# openssl genrsa -des3 -out www.xyz.com.key 1024

Generate a Certificate Signing Request (CSR) Using the key generate above, you should generate a certificate request file (csr) using openssl as shown below.

[root@s4-app-dev jbossuser]# openssl req -new -key www.xyz.com.key -out www.xyz.com.csr

Generate a Self-Signed SSL Certificate For testing purpose, you can generate a self-signed SSL certificate that is valid for 1 year using openssl command as shown below.

[root@s4-app-dev jbossuser]# openssl x509 -req -days 365 -in www.xyz.com.csr -signkey www.xyz.com.key -out www.xyz.com.crt

2、去除Apache启动时要求输入密码的提示信息

1. 首先备份原始RSA私钥文件，然后再去除RSA私钥文件上的密语保护：
   $ cp server.key server.key.org
$ openssl rsa -in server.key.org -out server.key
2. 确保server.key只能被root读取：
   $ chmod 400 server.key

3、修改apache httpd.conf文件

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/home/oauth/data/opt/jboss/httpd/httpd" will be interpreted by the
# server as "/home/oauth/data/opt/jboss/httpd/httpd/logs/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/home/oauth/data/opt/jboss/httpd/httpd"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 172.16.1.224:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_file.so
LoadModule authn_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbm.so
LoadModule authn_anon_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_anon.so
LoadModule authn_dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbd.so
LoadModule authn_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_default.so
LoadModule authn_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_alias.so
LoadModule authz_host_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_host.so
LoadModule authz_groupfile_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_groupfile.so
LoadModule authz_user_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_user.so
LoadModule authz_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_dbm.so
LoadModule authz_owner_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_owner.so
LoadModule authz_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_default.so
LoadModule auth_basic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_basic.so
LoadModule auth_digest_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_digest.so
LoadModule advertise_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_advertise.so
LoadModule file_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_file_cache.so
LoadModule cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cache.so
LoadModule disk_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_disk_cache.so
LoadModule mem_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mem_cache.so
LoadModule dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dbd.so
LoadModule dumpio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dumpio.so
LoadModule reqtimeout_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_reqtimeout.so
LoadModule ext_filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ext_filter.so
LoadModule include_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_include.so
LoadModule filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_filter.so
LoadModule substitute_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_substitute.so
LoadModule deflate_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_deflate.so
LoadModule log_config_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_config.so
LoadModule log_forensic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_forensic.so
LoadModule logio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_logio.so
LoadModule env_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_env.so
LoadModule mime_magic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime_magic.so
LoadModule cern_meta_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cern_meta.so
LoadModule expires_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_expires.so
LoadModule headers_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_headers.so
LoadModule ident_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ident.so
LoadModule usertrack_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_usertrack.so
LoadModule unique_id_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_unique_id.so
LoadModule setenvif_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_setenvif.so
LoadModule version_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_version.so
LoadModule proxy_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy.so
LoadModule proxy_connect_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_connect.so
LoadModule proxy_ftp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ftp.so
LoadModule proxy_http_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_http.so
LoadModule proxy_scgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ajp.so
LoadModule proxy_cluster_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_cluster.so
LoadModule ssl_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ssl.so
LoadModule mime_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime.so
LoadModule dav_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav.so
LoadModule status_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_status.so
LoadModule autoindex_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_autoindex.so
LoadModule asis_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_asis.so
LoadModule info_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_info.so
LoadModule suexec_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_suexec.so
LoadModule cgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgi.so
LoadModule cgid_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgid.so
LoadModule jk_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_jk.so
LoadModule manager_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_manager.so
LoadModule slotmem_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_slotmem.so
LoadModule dav_fs_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav_fs.so
LoadModule vhost_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_vhost_alias.so
LoadModule negotiation_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_negotiation.so
LoadModule dir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dir.so
LoadModule imagemap_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_imagemap.so
LoadModule actions_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_actions.so
LoadModule speling_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_speling.so
LoadModule userdir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_userdir.so
LoadModule alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_alias.so
LoadModule rewrite_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_rewrite.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
#ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName 192.168.101.105:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or 0 for unlimited
# Default setting is to accept 200 Ranges
#MaxRanges 0

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#

# MOD_CLUSTER_ADDS
# Adjust to you hostname and subnet.
<IfModule manager_module>
  Listen 192.168.101.105:6666
  <VirtualHost 192.168.101.105:6666>
    <Location />
     Order deny,allow
     Deny from all
     Allow from all
    </Location>

    KeepAlive on
    KeepAliveTimeout 300
    MaxKeepAliveRequests 0
    #ServerAdvertise on http://192.168.101.105:6666
    ServerAdvertise on
    AdvertiseFrequency 5
    #AdvertiseSecurityKey cnta.gov.cn
    #AdvertiseGroup @ADVIP@:23364
    ManagerBalancerName modcluster
    EnableMCPMReceive
    AllowDisplay On

    <Location /mod_cluster_manager>
       SetHandler mod_cluster-manager
       Order deny,allow
       Deny from all
       Allow from all
    </Location>

  </VirtualHost>

  ProxyRequests Off
  ProxyPass / balancer://modcluster/
  ProxyPassReverse / balancer://modcluster/

</IfModule>

4、修改apache httpd-ssl.conf文件

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512

#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#
#   Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
#SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism
#   to use and second the expiring timeout (in seconds).
#SSLSessionCache         "dbm:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache"
SSLSessionCache        "shmcb:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache(512000)"
SSLSessionCacheTimeout  600

#   Semaphore:
#   Configure the path to the mutual exclusion semaphore the
#   SSL engine uses internally for inter-process synchronization.
SSLMutex  "file:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_mutex"

SSLCryptoDevice builtin

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

#   General setup for the virtual host
#DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs"

ServerName 192.168.101.105:443

#ServerAdmin you@example.com
ErrorLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/error_log"
TransferLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/access_log"

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

#   SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect.  Disable SSLv2 access by default:
SSLProtocol all -SSLv2

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCipherSuite ALL
#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
#   in mind that if you have both an RSA and a DSA certificate you
#   can configure both in parallel (to also allow the use of DSA
#   ciphers, etc.)
SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt"
#SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.crt"

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-private.key"
#SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.key"

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
SSLCertificateChainFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt"

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt"
#SSLCACertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt/ca-bundle.crt"

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl"
#SSLCARevocationFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl/ca-bundle.crl"

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is send or allowed to received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly.
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
BrowserMatch ".*MSIE.*" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_request_log" \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

　5、修改（jboss-eap-6.3）domain.xml文件

<subsystem xmlns="urn:jboss:domain:web:2.1" default-virtual-server="default-host" native="false" instance-id="${jboss.node.name}">
                <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/>
                <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/>
                <virtual-server name="default-host" enable-welcome-root="true">
                    <alias name="localhost"/>
                    <alias name="example.com"/>
                </virtual-server>
</subsystem>

<subsystem xmlns="urn:jboss:domain:modcluster:1.2">
         <mod-cluster-config advertise-socket="modcluster" connector="ajp" proxy-list="1.1.1.1:6666" sticky-session="false" sticky-session-force="false">
                    <dynamic-load-provider>
                        <load-metric type="busyness"/>
                    </dynamic-load-provider>
        </mod-cluster-config>
</subsystem>