文章转载自:https://madaidans-insecurities.github.io/guides/linux-hardening.html

1. Choosing the right Linux distribution

​ There are many factors that go into choosing a good Linux distribution.

​ The best distribution to use as a base for your hardened operating system would be Gentoo Linux as it allows you to configure your system exactly how you want it to be which will be extremely useful, especially when we come to more secure compilation flags later in the guide.



​ However, Gentoo may not be feasible for many people due to its significant usability pitfalls. In this case, Void Linux's musl build is a good compromise.

2. Kernels

​ The kernel is the core of the operating system and is unfortunately very prone to attacks. As Brad Spengler has once said, it can be thought of as the largest, most vulnerable setuid root binary on the system. Thus, it is very important for the kernel to be hardened as much as possible.

2.1 Stable vs. LTS kernels

​ The Linux kernel is released under two main forms: stable and long-term support (LTS). Stable releases are more recent whereas LTS releases are an older stable release that is being supported for a long time. There are many consequences to choosing either of the aforementioned releases.



​ The Linux kernel does not use CVEs to identify security vulnerabilities properly. This means that fixes for most security vulnerabilities are not able to be backported to LTS kernels; but stable releases contain all security fixes made so far.



​ With those fixes however, a stable kernel includes a lot more new features, therefore vastly increasing the attack surface of the kernel and introducing a large amount of new bugs. On the contrary, LTS kernels have less attack surface because these features are not being constantly added.



​ Additionally, stable kernels include newer hardening features to mitigate certain exploits which LTS kernels do not. A few examples of such features are the Lockdown LSM and STACKLEAK GCC plugin.



​ To conclude, there is a trade-off when choosing a stable or LTS kernel. LTS kernels have less hardening features and not all public bug fixes at that point have been backported, but it generally has less attack surface and potentially a smaller chance of introducing unknown bugs. Stable kernels have more hardening features and all known bug fixes are included but it also has more attack surface and greater chances of introducing more unknown bugs. In the end though, a more recent LTS branch such as the 4.19 kernel would be preferred due to the much smaller attack surface.

2.2 Sysctl

​ Sysctl is a tool that allows the user to configure certain kernel settings and enable various security features or disable dangerous features to reduce attack surface. To change settings temporarily you can execute:

sysctl -w $tunable = $value

​ To change sysctls permanently you can add the one you want to change to /etc/sysctl.conf or the corresponding files within /etc/sysctl.d, depending on your Linux distribution.



​ The following are the recommended sysctl settings that you should change.

2.2.1 Kernel self-protection

kernel.kptr_restrict=2

​ A kernel pointer points to a specific location in kernel memory. These can be very useful in exploiting the kernel but kernel pointers are not hidden by default — it is easy to uncover them by, for example, reading the contents of /proc/kallsyms. This setting aims to mitigate kernel pointer leaks. Alternatively, you can set kernel.kptr_restrict=1 to only hide kernel pointers from processes without the CAP_SYSLOG capability.

kernel.dmesg_restrict=1

dmesg is the kernel log. It exposes a large amount of useful kernel debugging information but this can often leak sensitive information such as kernel pointers. Changing the above sysctl restricts the kernel log to the CAP_SYSLOG capability.

kernel.printk=3 3 3 3

​ Despite the value of dmesg_restrict, the kernel log will still be displayed in the console during boot. Malware that is able to record the screen during boot may be able to abuse this to gain higher privileges. This option prevents those information leaks. This must be used in combination with certain boot parameters described below to be fully effective.

kernel.unprivileged_bpf_disabled=1
net.core.bpf_jit_harden=2

eBPF exposes quite large attack surface. As such, it must be restricted. These sysctls restrict eBPF to the CAP_BPF capability (CAP_SYS_ADMIN on kernel versions prior to 5.8) and enable JIT hardening techniques such as constant blinding.

dev.tty.ldisc_autoload=0

​ This restricts loading TTY line disciplines to the CAP_SYS_MODULE capability to prevent unprivileged attackers from loading vulnerable line disciplines with the TIOCSETD ioctl which has been abused in a number of exploits before.

vm.unprivileged_userfaultfd=0

​ The userfaultfd() syscall is often abused to exploit use-after-free flaws. Due to this, this sysctl is used to restrict this syscall to the CAP_SYS_PTRACE capability.

kernel.kexec_load_disabled=1

kexec is a system call that is used to boot another kernel during runtime. This functionality can be abused to load a malicious kernel and gain arbitrary code execution in kernel mode so this sysctl disables it.

kernel.sysrq=4

​ The SysRq key exposes a lot of potentially dangerous debugging functionality to unprivileged users. Contrary to common assumptions, SysRq is not only an issue for physical attacks as it can also be triggered remotely. The value of this sysctl makes it so that a user can only use the secure attention key which will be necessary for accessing root securely. Alternatively, you can simply set the value to 0 to disable SysRq completely.

kernel.unprivileged_userns_clone=0

​ User namespaces are a feature in the kernel which aim to improve sandboxing and make it easily accessible for unprivileged users however, this feature exposes significant kernel attack surface for privilege escalation so this sysctl restricts the usage of user namespaces to the CAP_SYS_ADMIN capability. For unprivileged sandboxing, it is instead recommended to use a setuid binary with little attack surface to minimize the potential for privilege escalation. This topic is covered further in the sandboxing section.



​ Be aware though that this sysctl only exists on certain Linux distributions as it requires a kernel patch. If your kernel does not include this patch, you can alternatively disable user namespaces completely (including for root) by setting user.max_user_namespaces=0.

kernel.perf_event_paranoid=3

​ Performance events add considerable kernel attack surface and have caused abundant vulnerabilities. This sysctl restricts all usage of performance events to the CAP_PERFMON capability (CAP_SYS_ADMIN on kernel versions prior to 5.8).



​ Be aware that this sysctl also requires a kernel patch that is only available on certain distributions. Otherwise, this setting is equivalent to kernel.perf_event_paranoid=2 which only restricts a subset of this functionality.

2.2.2 Network

net.ipv4.tcp_syncookies=1

​ This helps protect against SYN flood attacks which are a form of denial of service attack in which an attacker sends a large amount of bogus SYN requests in an attempt to consume enough resources to make the system unresponsive to legitimate traffic.

net.ipv4.tcp_rfc1337=1

​ This protects against time-wait assassination by dropping RST packets for sockets in the time-wait state.

net.ipv4.conf.all.rp_filter=1
net.ipv4.conf.default.rp_filter=1

​ These enable source validation of packets received from all interfaces of the machine. This protects against IP spoofing in which an attacker sends a packet with a fraudulent IP address.

net.ipv4.conf.all.accept_redirects=0
net.ipv4.conf.default.accept_redirects=0
net.ipv4.conf.all.secure_redirects=0
net.ipv4.conf.default.secure_redirects=0
net.ipv6.conf.all.accept_redirects=0
net.ipv6.conf.default.accept_redirects=0
net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.default.send_redirects=0

​ These disable ICMP redirect acceptance and sending to prevent man-in-the-middle attacks and minimize information disclosure.

net.ipv4.icmp_echo_ignore_all=1

​ This setting makes your system ignore all ICMP requests to avoid Smurf attacks, make the device more difficult to enumerate on the network and prevent clock fingerprinting through ICMP timestamps.

net.ipv4.conf.all.accept_source_route=0
net.ipv4.conf.default.accept_source_route=0
net.ipv6.conf.all.accept_source_route=0
net.ipv6.conf.default.accept_source_route=0

Source routing is a mechanism that allows users to redirect network traffic. As this can be used to perform man-in-the-middle attacks in which the traffic is redirected for nefarious purposes, the above settings disable this functionality.

net.ipv6.conf.all.accept_ra=0
net.ipv6.conf.default.accept_ra=0

​ Malicious IPv6 router advertisements can result in a man-in-the-middle attack so they should be disabled.

net.ipv4.tcp_sack=0
net.ipv4.tcp_dsack=0
net.ipv4.tcp_fack=0

​ This disables TCP SACK. SACK is commonly exploited and unnecessary for many circumstances so it should be disabled if you don't require it.

2.2.3 User space

kernel.yama.ptrace_scope=2

ptrace is a system call that allows a program to alter and inspect another running process which allows attackers to trivially modify the memory of other running programs. This restricts usage of ptrace to only processes with the CAP_SYS_PTRACE capability. Alternatively, set the sysctl to 3 to disable ptrace entirely.

vm.mmap_rnd_bits=32
vm.mmap_rnd_compat_bits=16

ASLR is a common exploit mitigation which randomizes the position of critical parts of a process in memory. This can make a wide variety of exploits harder to pull off as they first require an information leak. The above settings increase the bits of entropy used for mmap ASLR, improving its effectiveness.



​ The values of these sysctls must be set in relation to the CPU architecture. The above values are compatible with x86 but other architectures may differ.

fs.protected_symlinks=1
fs.protected_hardlinks=1

​ This only permits symlinks to be followed when outside of a world-writable sticky directory, when the owner of the symlink and follower match, or when the directory owner matches the symlink's owner. This also prevents hardlinks from being created by users that do not have read/write access to the source file. Both of these prevent many common TOCTOU races.

fs.protected_fifos=2
fs.protected_regular=2

​ These prevent creating files in potentially attacker-controlled environments such as world-writable directories to make data spoofing attacks more difficult.

2.3 Boot parameters

​ Boot parameters pass settings to the kernel at boot using your bootloader. Some settings can be used to increase security, similar to sysctl. Bootloaders often differ in how boot parameters are set. A few examples are listed below but you should research the required steps for your specific bootloader.



​ If using GRUB as your bootloader, edit /etc/default/grub and add your parameters to the GRUB_CMDLINE_LINUX_DEFAULT= line.



​ If using Syslinux, edit /boot/syslinux/syslinux.cfg and add them to the APPEND line.



​ If using systemd-boot, edit your loader entry and append them to the end of the linux line.



​ The following settings are recommended to increase security.

2.3.1 Kernel self-protection

slab_nomerge

​ This disables slab merging which significantly increases the difficulty of heap exploitation by preventing overwriting objects from merged caches and by making it harder to influence slab cache layout.

slub_debug=FZ

​ These enable sanity checks (F) and redzoning (Z). Sanity checks add various checks to prevent corruption in certain slab operations. Redzoning adds extra areas around slabs that detect when a slab is overwritten past its real size which can help detect overflows.

init_on_alloc=1 init_on_free=1

​ This enables zeroing of memory during allocation and free time which can help mitigate use-after-free vulnerabilities and erase sensitive information in memory.



​ If your kernel version is lower than 5.3, then these options do not exist. Instead, append "P" to the above slub_debug option to get slub_debug=FZP and also add page_poison=1. These offer a weaker form of memory erasure upon deallocation since they are actually a debugging feature that just happens to have some security benefits.

page_alloc.shuffle=1

​ This option randomizes page allocator freelists, improving security by making page allocations less predictable. This also improves performance.

pti=on

​ This enables Kernel Page Table Isolation which mitigates Meltdown and prevents some KASLR bypasses.

vsyscall=none

​ This disables vsyscalls as they are obsolete and have been replaced with vDSO. vsyscalls are also at fixed addresses in memory, making them a potential target for ROP attacks.

debugfs=off

​ This disables debugfs which exposes a lot of sensitive information about the kernel.

oops=panic

​ Sometimes certain kernel exploits will cause what is known as an "oops". This parameter will cause the kernel to panic on such oopses, thereby preventing those exploits. However, sometimes bad drivers cause harmless oopses which would result in your system crashing, meaning this boot parameter can only be used on certain hardware.

module.sig_enforce=1

​ This only allows kernel modules that have been signed with a valid key to be loaded which increases security by making it much harder to load a malicious kernel module. This prevents all out-of-tree kernel modules, including DKMS modules from being loaded unless you have signed them, meaning that modules such as the VirtualBox or Nvidia drivers may not be usable although that may not be important, depending on your setup.

lockdown=confidentiality

​ The kernel lockdown LSM can eliminate many methods that user space code could abuse to escalate to kernel privileges and extract sensitive information. This LSM is necessary to implement a clear security boundary between user space and the kernel. The above option enables this feature in confidentiality mode, the strictest option. This implies module.sig_enforce=1.

mce=0

​ This causes the kernel to panic on uncorrectable errors in ECC memory which could be exploited. This is unnecessary for systems without ECC memory.

quiet loglevel=0

​ These parameters prevent information leaks during boot and must be used in combination with the kernel.printk sysctl documented above.

2.3.2 CPU mitigations

​ It is best to enable all CPU mitigations that are applicable to your CPU as to ensure that you are not affected by known vulnerabilities. This is a list that enables all built-in mitigations:

spectre_v2=on spec_store_bypass_disable=on tsx=off tsx_async_abort=full,nosmt mds=full,nosmt l1tf=full,force nosmt=force kvm.nx_huge_pages=force

​ You must research the CPU vulnerabilities that your system is affected by and apply a selection of the above mitigations accordingly. Keep in mind that you will need to install microcode updates to be fully protected from these vulnerabilities. All of these may cause a significant performance decrease.

2.3.3 Result

​ If you have followed all of the above recommendations, excluding your specific CPU mitigations, you will have:

slab_nomerge slub_debug=FZ init_on_alloc=1 init_on_free=1 page_alloc.shuffle=1 pti=on vsyscall=none debugfs=off oops=panic module.sig_enforce=1 lockdown=confidentiality mce=0 quiet loglevel=0

​ You may need to regenerate your GRUB configuration file to apply these if using GRUB as your bootloader.

2.4 hidepid

/proc is a pseudo-filesystem that contains information about all processes currently running on the system. By default this is accessible to all users which can allow an attacker to spy on other processes. To permit users to only see their own processes and not those of other users, you must mount /proc with the hidepid=2,gid=proc mount options. gid=proc exempts the proc group from this feature so you can whitelist specific users or processes. One way to add these mount options is to edit /etc/fstab and add:

proc /proc proc nosuid,nodev,noexec,hidepid=2,gid=proc 0 0

​ systemd-logind still needs to see other users' processes so, for user sessions to work correctly on a systemd system, you must create /etc/systemd/system/systemd-logind.service.d/hidepid.conf and add:

[Service]
SupplementaryGroups=proc

2.5 Kernel attack surface reduction

​ It is best to disable any functionality that is not absolutely required as to minimize potential kernel attack surface. These features do not necessarily have to be dangerous, they could simply be benign code that is removed to reduce attack surface. Never disable random things that you don't understand. The following are some examples that may be of use, depending on your setup.

2.5.1 Boot parameters

​ Boot parameters can often be used to reduce attack surface. One such example is:

ipv6.disable=1

​ This disables the entire IPv6 stack which may not be required if you have not migrated to it. Do not use this boot parameter if you are using IPv6.

2.5.2 Blacklisting kernel modules

​ The kernel allows unprivileged users to indirectly cause certain modules to be loaded via module auto-loading. This allows an attacker to auto-load a vulnerable module which is then exploited. One such example is CVE-2017-6074, in which an attacker could trigger the DCCP kernel module to be loaded by initiating a DCCP connection and then exploit a vulnerability in said kernel module.



​ Specific kernel modules can be blacklisted by inserting files into /etc/modprobe.d with instructions on which kernel modules to blacklist.



​ The install parameter tells modprobe to run a specific command instead of loading the module as normal. /bin/false is a command that simply returns 1 which will essentially do nothing. Both of these together tells the kernel to run /bin/false instead of loading the module which will prevent the module from being exploited by attackers. The following are kernel modules that are most likely to be unnecessary:

install dccp /bin/false
install sctp /bin/false
install rds /bin/false
install tipc /bin/false
install n-hdlc /bin/false
install ax25 /bin/false
install netrom /bin/false
install x25 /bin/false
install rose /bin/false
install decnet /bin/false
install econet /bin/false
install af_802154 /bin/false
install ipx /bin/false
install appletalk /bin/false
install psnap /bin/false
install p8023 /bin/false
install p8022 /bin/false
install can /bin/false
install atm /bin/false

​ Obscure networking protocols in particular add considerable remote attack surface. This blacklists:

  • DCCP — Datagram Congestion Control Protocol
  • SCTP — Stream Control Transmission Protocol
  • RDS — Reliable Datagram Sockets
  • TIPC — Transparent Inter-process Communication
  • HDLC — High-Level Data Link Control
  • AX25 — Amateur X.25
  • NetRom
  • X25
  • ROSE
  • DECnet
  • Econet
  • af_802154 — IEEE 802.15.4
  • IPX — Internetwork Packet Exchange
  • AppleTalk
  • PSNAP — Subnetwork Access Protocol
  • p8023 — Novell raw IEEE 802.3
  • p8022 — IEEE 802.2
  • CAN — Controller Area Network
  • ATM
install cramfs /bin/false
install freevxfs /bin/false
install jffs2 /bin/false
install hfs /bin/false
install hfsplus /bin/false
install squashfs /bin/false
install udf /bin/false

​ This blacklists various rare filesystems.

install cifs /bin/true
install nfs /bin/true
install nfsv3 /bin/true
install nfsv4 /bin/true
install gfs2 /bin/true

​ Network filesystems can also be blacklisted if not in use.

install vivid /bin/false

​ The vivid driver is only useful for testing purposes and has been the cause of privilege escalation vulnerabilities so it should be disabled.

install bluetooth /bin/false
install btusb /bin/false

​ This disables Bluetooth which has a history of security issues.

install uvcvideo /bin/false

​ This disables the webcam to prevent it from being used to spy on you.



​ You can also blacklist the microphone module however this can differ from system to system. To find the name of the module, look in /proc/asound/modules and blacklist it. For example, one such module is snd_hda_intel.



​ Be aware though that sometimes the kernel module for the microphone is the same as the module for the speaker. This means that disabling the microphone like this may also inadvertently disable any speakers. Although, speakers can potentially be turned into microphones too so this isn't necessarily a negative outcome.



​ It would be preferred to physically remove these devices or, at the very least, disable them in the BIOS / UEFI. Disabling the kernel modules is not as effective.

2.5.3 rfkill

​ Wireless devices can be blacklisted through rfkill to reduce remote attack surface further. To blacklist all wireless devices, execute:

rfkill block all

​ WiFi can be unblocked with:

rfkill unblock wifi

​ On systems using systemd, rfkill persists across sessions however, on systems using a different init system, you may have to create an init script to execute these commands upon boot.

2.6 Other kernel pointer leaks

​ Previous sections have prevented some kernel pointer leaks but there are still a few more.



​ On the filesystem, there exists the kernel images and System.map files in /boot. There is also other sensitive kernel information in the /usr/src and /{,usr/}lib/modules directories. You should restrict the file permissions of these directories to make them only readable by the root user. You should also delete the System.map files as they are not required for anything except advanced debugging.



​ Additionally, certain logging daemons such as systemd's journalctl include the kernel logs which can be used to bypass the above dmesg_restrict protection. Removing the user from the adm group is often sufficient to revoke access to these logs:

gpasswd -d adm $user

2.7 Restricting access to sysfs

sysfs is a pseudo-filesystem which provides large quantities of kernel and hardware information. It is commonly mounted at /sys. sysfs has been the cause of numerous information leaks, particularly of kernel pointers. Whonix's security-misc package includes the hide-hardware-info script which restricts access to this directory as well as a few in /proc in an attempt to hide potential hardware identifiers and prevent kernel pointer leaks. This script is configurable and allows whitelisting specific applications based on groups. It is recommended to apply this and make it execute on boot with an init script. For example, this is a systemd service to do so.



​ For basic functionality to work on systems using systemd, you must whitelist a few system services. This can be done by creating /etc/systemd/system/user@.service.d/sysfs.conf and adding:

[Service]
SupplementaryGroups=sysfs

​ This will not fix everything though. Many applications may still break and it is up to you to whitelist them properly.

2.8 linux-hardened

​ Certain distributions such as Arch Linux include a hardened kernel package. This contains many hardening patches and a more security-conscious kernel configuration. It is recommended to install this if possible.

2.9 Grsecurity

Grsecurity is a set of kernel patches that can massively increase kernel security. These patches used to be freely available but are now commercial and must be purchased. If it is available, then it is highly recommended that you get it. Grsecurity offers state-of-the-art kernel and user space protections.

2.10 Linux Kernel Runtime Guard

Linux Kernel Runtime Guard (LKRG) is a kernel module which ensures kernel integrity at runtime and detects exploits. It can kill entire classes of kernel exploits; but it is not a perfect mitigation as LKRG is bypassable by design. It is only suitable for off-the-shelf malware. However, while it is unlikely, LKRG may in itself expose new vulnerabilities like any additional kernel module.

2.11 Kernel self-compilation

​ It is recommended to compile your own kernel whilst enabling as little kernel modules as possible and as many security features as possible to keep the attack surface of the kernel at an absolute minimum.



​ In addition, apply kernel hardening patches such as linux-hardened or grsecurity as mentioned above.



​ Distribution-compiled kernels also have public kernel pointers / symbols which are very useful for exploits. Compiling your own kernel will give you unique kernel symbols which, along with kptr_restrict, dmesg_restrict, and other hardening against kernel pointer leaks, will make it considerably harder for attackers to create exploits that rely on kernel pointer knowledge.



​ You can take inspiration from or use Whonix's hardened-kernel once it is complete to develop your kernel configuration.

3. Mandatory access control

​ Mandatory access control (MAC) systems give fine-grained control over what programs can access. This means that your browser won't have access to your entire home directory or similarly.



​ The most used MAC systems are SELinux and AppArmor. SELinux is a lot more secure than AppArmor as it is more fine-grained. For example, it's inode-based rather than path-based, allows enforcing significantly stronger restrictions, can filter kernel ioctls, and much more. Unfortunately, this comes at the cost of being much more difficult to use and harder to learn so AppArmor may be preferred by some.



​ To enable AppArmor in the kernel, you must set the following boot parameters:

apparmor=1 security=apparmor

​ To enable SELinux instead, set these parameters:

selinux=1 security=selinux

​ Keep in mind that simply enabling a MAC system won't by itself magically increase security. You must develop strict policies to fully utilize it. For example, to create AppArmor profiles, execute:

aa-genprof $path_to_program

​ Open the program and start using it as you normally would. AppArmor will detect what files it needs to access and will add them to the profile if you choose. This alone will not be sufficient for high quality profiles though; seek the AppArmor documentation for more details.



​ If you want to take it a step further, you can setup a full system MAC policy that confines every single user space process by implementing an initramfs hook which enforces a MAC policy for the init system. This is how Android uses SELinux, and how Whonix will use AppArmor in the future. This is necessary for enforcing a strong security model implementing principle of least privilege.

4. Sandboxing

4.1 Application sandboxing

​ A sandbox allow you to run a program in an isolated environment that has either limited access or none at all to the rest of your system. You can use these to secure applications or run untrusted programs.



​ It is recommended to use bubblewrap in a separate user account along with AppArmor or SELinux to sandbox programs. You could also consider using gVisor instead, which has the advantage of providing each guest with its own kernel.



​ Either of these can be used to create a very powerful sandbox with minimal attack surface exposed. If you do not wish to create sandboxes yourself, consider using Whonix's sandbox-app-launcher once it is complete. You should not use Firejail.



​ Container solutions such as Docker and LXC are often used as a misguided form of sandboxing. These are too permissive as to support a wide variety of applications so they cannot be considered a strong application sandbox.

4.2 Common sandbox escapes

4.2.1 PulseAudio

PulseAudio is a common sound server but it was not written with isolation or sandboxing in mind, making it a recurring sandbox escape vulnerability. To prevent this, it is recommended to block access to PulseAudio from within your sandbox or uninstall it from your system entirely. You can use the standard ALSA utilities instead.

4.2.2 D-Bus

D-Bus is the most prevalent form of inter-process communication on desktop Linux but it is also another common avenue for sandbox escapes since it allows freely interacting with services. One such example of these vulnerabilities was in Firejail. You should either block access to D-Bus from within the sandbox or mediate it via MAC with fine-grained rules.

4.2.3 GUI isolation

Any Xorg window can access another window. This allows trivial keylogging or screenshot programs that can even record things such as the root password. You can sandbox Xorg windows with a nested X11 server such as Xpra or Xephyr and bubblewrap.



Wayland isolates windows from each other by default and would be a much better choice than Xorg although Wayland may not be as generally usable as Xorg since it is earlier in development.

4.2.4 ptrace

​ As discussed earlier, ptrace is a system call that could be abused to trivially compromise processes running outside of the sandbox. To prevent this, you can enable the kernel YAMA ptrace restrictions via sysctl or you can blacklist the ptrace syscall in your seccomp filter.

4.2.5 TIOCSTI

TIOCSTI is an ioctl which allows injecting terminal commands and provides an attacker with an easy mechanism to move laterally among other processes within the same user's session. This attack can be mitigated by blacklisting the ioctl in your seccomp filter or by using bubblewrap's --new-session argument.

4.3 Systemd sandboxing

systemd is unrecommended but some may be unable to switch. These people can at the very least, sandbox services so they can only access what they need. Here is an example of a sandboxed systemd service:

[Service]
CapabilityBoundingSet=CAP_NET_BIND_SERVICE
ProtectSystem=strict
ProtectHome=true
ProtectKernelTunables=true
ProtectKernelModules=true
ProtectControlGroups=true
ProtectKernelLogs=true
ProtectHostname=true
ProtectClock=true
ProtectProc=invisible
ProcSubset=pid
PrivateTmp=true
PrivateUsers=yes
PrivateDevices=true
MemoryDenyWriteExecute=true
NoNewPrivileges=true
RestrictRealtime=true
RestrictSUIDSGID=true
RestrictAddressFamilies=AF_INET
RestrictNamespaces=yes
SystemCallFilter=write read openat close brk fstat lseek mmap mprotect munmap rt_sigaction rt_sigprocmask ioctl nanosleep select access execve getuid arch_prctl set_tid_address set_robust_list prlimit64 pread64 getrandom
SystemCallArchitectures=native
AppArmorProfile=/etc/apparmor.d/usr.bin.example

​ Explanations of all the options:

  • CapabilityBoundingSet= — Specifies the capabilities the process is given.
  • ProtectHome=true — Makes all home directories inaccessible.
  • ProtectKernelTunables=true — Mounts kernel tunables such as those modified through sysctl as read-only.
  • ProtectKernelModules=true — Denies module loading and unloading.
  • ProtectControlGroups=true — Mounts all control group hierarchies as read-only.
  • ProtectKernelLogs=true — Prevents accessing the kernel logs.
  • ProtectHostname=true — Prevents changes to the system hostname.
  • ProtectClock — Prevents changes to the system clock.
  • ProtectProc=invisible — Hides all outside processes.
  • ProcSubset=pid — Permits access to only the pid subset of /proc.
  • PrivateTmp=true — Mounts an empty tmpfs over /tmp and /var/tmp, therefore hiding their previous contents.
  • PrivateUsers=true — Sets up an empty user namespace to hide other user accounts on the system.
  • PrivateDevices=true — Creates a new /dev mount with minimal devices present.
  • MemoryDenyWriteExecute=true — Enforces a memory W^X policy.
  • NoNewPrivileges=true — Prevents escalating privileges.
  • RestrictRealtime=true — Prevents attempts to enable realtime scheduling.
  • RestrictSUIDSGID=true — Prevents executing setuid or setgid binaries.
  • RestrictAddressFamilies=AF_INET — Restricts the usable socket address families to IPv4 only (AF_INET).
  • RestrictNamespaces=true — Prevents creating any new namespaces.
  • SystemCallFilter=... — Restricts the allowed syscalls to the absolute minimum.
  • SystemCallArchitectures=native — Prevents executing syscalls from other CPU architectures.
  • AppArmorProfile=... — Runs the process under the specified AppArmor profile.

​ You cannot just copy this example configuration into yours. Each service's requirements differ and the sandbox has to be fine-tuned for each of them specifically. To learn more about all of the options you can set, read the systemd.exec manpage.



​ If you use an init system other than systemd, then all of these options can be easily replicated with bubblewrap.

4.4 gVisor

​ Ordinary sandboxes inherently share the same kernel as the host. You are trusting the kernel, which we have already evaluated to be insecure, to confine these programs properly. A kernel exploit from within the sandbox can bypass any restrictions as the host kernel's entire attack surface is completely exposed. There have been efforts to limit the attack surface with seccomp however, it is not enough to fully fix this issue. gVisor is a solution to this problem. It provides each application with its own kernel that reimplements a large portion of the Linux kernel's syscalls but in a memory safe language, therefore providing significantly stronger isolation.

4.5 Virtual machines

​ While not a traditional "sandbox", virtual machines separate processes by virtualizing an entirely new system, thereby providing very strong isolation. KVM is a kernel module that allows the kernel to function as a hypervisor and QEMU is an emulator that utilizes KVM. Virt-manager and GNOME Boxes are both good and easy-to-use GUIs to manage KVM/QEMU virtual machines. Virtualbox is unrecommended for several reasons.

5. Hardened memory allocator

hardened_malloc is a hardened memory allocator that provides substantial protection from heap memory corruption vulnerabilities. It is heavily based on OpenBSD's malloc design but with numerous improvements.



​ hardened_malloc can be used per-application via the LD_PRELOAD environment variable. For example, assuming the library you have compiled is located at /usr/lib/libhardened_malloc.so, you can execute:

LD_PRELOAD="/usr/lib/libhardened_malloc.so" $program

​ It can also be used system-wide by globally preloading the library which is the recommended way of using it. To do so, edit /etc/ld.so.preload and insert:

/usr/lib/libhardened_malloc.so

​ hardened_malloc may break some applications although the majority will work fine. It is recommended to compile hardened_malloc with the following options to minimize breakage:

CONFIG_SLAB_QUARANTINE_RANDOM_LENGTH=0 CONFIG_SLAB_QUARANTINE_QUEUE_LENGTH=0 CONFIG_GUARD_SLABS_INTERVAL=8

​ You should also set the following with sysctl to accomodate the large number of guard pages created by hardened_malloc:

vm.max_map_count=524240

The Whonix project provides a hardened_malloc package for Debian-based distributions.

6. Hardened compilation flags

​ Compiling your own programs can offer numerous benefits as it gives you the ability to optimize your programs for security. However, it is easy to do the exact opposite and worsen security — if you are unsure about what you are doing, skip this section. This will be easiest on a source-based distribution such as Gentoo but it is possible to do this on others.



​ Certain compilation options can be used to add additional exploit mitigations that eliminate entire classes of common vulnerabilities. You have likely heard of regular protections such as Position Independent Executables, Stack Smashing Protector, immediate binding, read-only relocations and FORTIFY_SOURCE but this section will not go over those as they have already been widely adopted. Instead, it will discuss modern exploit mitigations like Control-Flow Integrity and shadow stacks.



​ This section refers to native programs, written primarily in C or C++. You must be using the Clang compiler as these features are not available on GCC. Keep in mind that due to the lack of widespread adoption of these mitigations, certain applications may fail to function with them enabled.

  • Control-Flow Integrity

    (CFI) is an exploit mitigation that

    aims to prevent code reuse attacks like ROP or JOP

    . A large portion of vulnerabilities are exploited using these techniques due to more widely adopted mitigations such as NX making older exploit techniques obsolete. Clang supports fine-grained forward-edge CFI, meaning that it effectively mitigates

    JOP

    attacks. Clang's CFI does not mitigate

    ROP

    by itself; you must also use a separate mechanism as documented below. To enable this, you must apply the following compilation flags:

    -flto -fvisibility=hidden -fsanitize=cfi
  • Shadow stacks

    protect a program's return address by replicating it in a different, hidden stack. The return addresses in the main stack and the shadow stack are then compared to see if either differ. If so, this would indicate an attack and the program will abort, therefore mitigating ROP attacks. Clang has a feature known as

    ShadowCallStack

    which accomplishes this, however, it is only available on ARM64. To enable this, you must apply the following compilation flags:

    -fsanitize=shadow-call-stack
  • ​ If the aforementioned ShadowCallStack is not an option, you can alternatively use

    ​ SafeStack

    which has a similar goal. Unfortunately though, this feature

    ​ suffers from many vulnerabilities

    so it isn't nearly as effective. If you still wish to enable this, you must apply the following compilation flag:

    -fsanitize=safe-stack
  • ​ One of the most common memory corruption vulnerabilities is

    uninitialized memory

    . Clang has an option to

    automatically initialize variables

    with either zero or a specific pattern. It is recommended to initialize variables to zero as using other patterns is more suitable for bug finding than exploit mitigation. To enable this, you must apply the following compilation flags:

    -ftrivial-auto-var-init=zero -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang

    ​ The existence of this option

    is currently being debated

    .

7. Memory safe languages

​ Programs written in memory safe languages are automatically protected from various security vulnerabilities including buffer overflows, uninitialized variables, use-after-free and more. The majority of vulnerabilities that have been discovered were memory safety issues as proven by research conducted by security researchers at Microsoft and Google. Examples of such memory safe languages include Rust, Swift and Java whereas examples of memory unsafe languages include C and C++. If practical, you should replace as many programs as possible with memory safe alternatives.

8. The root account

​ Root can do anything and has access to your entire system. Thus, it should be locked down as much as possible so attackers cannot easily gain root access.

8.1 /etc/securetty

​ The file, /etc/securetty specifies where you are allowed to login as root from. This file should be kept empty so that nobody can do so from a terminal.

8.2 Restricting su

su lets you switch users from a terminal. By default it tries to login as root. To restrict the use of su to users within the wheel group, edit /etc/pam.d/su and /etc/pam.d/su-l and add:

auth required pam_wheel.so use_uid

​ You should have as little users in the wheel group as possible.

8.3 Locking the root account

​ To lock the root account to prevent anyone from ever logging in as root, execute:

passwd -l root

​ Make sure that you have an alternative method of gaining root (such as booting from a live USB and chrooting into the filesystem) before doing this so you do not inadvertently lock yourself out of the system.

8.4 Denying root login via SSH

​ To prevent someone from logging in as root via SSH, edit /etc/ssh/sshd_config and add:

PermitRootLogin no

8.5 Increasing the number of hashing rounds

​ You can increase the number of hashing rounds that shadow uses, thereby increasing the security of your hashed passwords by forcing an attacker to compute much more hashes to crack your password. By default, shadow uses 5000 rounds but you can increase this to as many as you want. Although, the more rounds you configure, the slower it will be to login. Edit /etc/pam.d/passwd and add the rounds option. For example:

password required pam_unix.so sha512 shadow nullok rounds=65536

​ This makes shadow perform 65536 rounds.



​ Your passwords are not automatically rehashed after applying this setting so you need to reset the password with:

passwd $username

8.6 Restricting Xorg root access

​ Certain distributions run Xorg as the root user by default. This is an issue because Xorg contains a massive amount of ancient, complicated code which adds huge attack surface and makes it more likely to have exploits that can gain root privileges. To stop it from being executed as root, edit /etc/X11/Xwrapper.config and add:

needs_root_rights = no

Alternatively, just switch to Wayland.

8.7 Accessing root securely

​ There are a wide range of methods that malware can use to sniff the password of the root account. As such, traditional ways of accessing the root account are insecure. Preferably, root would not be accessed at all but this isn't really feasible. This section details the safest way possible of accessing the root account. These instructions should be applied as soon as the OS is installed to make sure it is free of malware.



​ You must not use your ordinary user account to access root as it may have been compromised. You also must not log directly into the root account. Create a separate "admin" user account that is used solely for accessing root and nothing else by executing:

useradd admin

​ Set a very strong password by executing:

passwd admin

​ Allow only this account to use your preferred mechanism of escalating privileges. For example, if using sudo, add a sudoers exception by executing:

visudo -f /etc/sudoers.d/admin-account

​ Now enter:

admin ALL=(ALL) ALL

​ Make sure that no other account has access to sudo (or your preferred mechanism).



​ Now, to actually login to this account, reboot first — this prevents, for example, a compromised window manager from performing login spoofing. When provided with a login prompt, activate the secure attention key by pressing the following combination of keys on your keyboard:

Alt + SysRq + k

​ This will kill all applications on the current virtual console, therefore defeating login spoofing attacks. Now, you can safely login to your admin account and perform tasks using root. Once you are finished, log out of the admin account and log back in to your unprivileged user account.

9. Firewalls

​ Firewalls can control incoming and outgoing network traffic and can be used to block or allow certain types of traffic. You should always block all incoming traffic unless you have a specific reason not to. It is recommended to set up a strict iptables or nftables firewall. Firewalls must be fine-tuned for your system and there is not one ruleset that can fit all of them. It is recommended to get familiar with creating firewall rules. The Arch Wiki and man page are both good resources for this.



​ This is an example of a basic iptables configuration that disallows all incoming network traffic:

*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
:TCP - [0:0]
:UDP - [0:0]
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m conntrack --ctstate INVALID -j DROP
-A INPUT -p udp -m conntrack --ctstate NEW -j UDP
-A INPUT -p tcp --tcp-flags FIN,SYN,RST,ACK SYN -m conntrack --ctstate NEW -j TCP
-A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable
-A INPUT -p tcp -j REJECT --reject-with tcp-reset
-A INPUT -j REJECT --reject-with icmp-proto-unreachable
COMMIT

​ You should not attempt to use this example on your actual system though. It is only suitable for certain desktop systems.

10. Identifiers

​ For privacy, it is best to minimize the amount of information that can be traced back to you.

10.1 Hostnames and usernames

​ Do not put anything uniquely indentifying in your hostname or username. Keep them as generic names such as "host" and "user" so you cannot be identified by them.

10.2 Timezones / Locales / Keymaps

​ If possible, your timezone should be set to "UTC" and your locale and keymap to "US".

10.3 Machine ID

​ A unique Machine ID is stored in /var/lib/dbus/machine-id and on systemd systems, /etc/machine-id also. These should be edited to something generic such as the Whonix ID:

b08dfa6083e7567a1921a715000001fb

10.4 MAC address spoofing

MAC addresses are unique identifiers assigned to network interface controllers (NICs). Every time you connect to a network (e.g. WiFi or ethernet), your MAC address is exposed. This allows people to use it to track you and uniquely identify you on the local network.



​ You should not completely randomize the MAC address. Having a completely random MAC address is obvious and will have the adverse effect of making you stand out. The OUI (Organizationally Unique Identifier) part of the MAC address identifies the chipset's manufacturer. Randomizing this part of the MAC address may give you an OUI that has never been used before, hasn't been used in decades or is extremely rare in your area, therefore making you stand out and making it obvious that you are spoofing your MAC address.



​ The end of the MAC address identifies your specific device and is what can be used to track you. Randomizing only this part of the MAC address prevents you from being tracked whilst still making the MAC address seem believable.



​ To spoof these addresses, first find out your network interface name by executing:

ip a

​ Next, install macchanger and execute:

macchanger -e $network_interface

​ To randomize the MAC address upon each boot, you should create an init script for your particular init system. This is an example of one for systemd:

[Unit]
Description=macchanger on eth0
Wants=network-pre.target
Before=network-pre.target
BindsTo=sys-subsystem-net-devices-eth0.device
After=sys-subsystem-net-devices-eth0.device [Service]
ExecStart=/usr/bin/macchanger -e eth0
Type=oneshot [Install]
WantedBy=multi-user.target

​ The above example spoofs the MAC address of the eth0 interface at boot. Replace eth0 with your network interface.

10.5 Time attacks

​ Nearly every system has a different time; this can be used for clock skew fingerprinting attacks. Differences as small as a few milliseconds are sufficient for deanonymizing users.

10.5.1 ICMP timestamps

ICMP timestamps leak the system time in query replies. The easiest way to block these is by blocking incoming connections with a firewall or by making the kernel ignore ICMP requests.

10.5.2 TCP timestamps

TCP timestamps also leak the system time. The kernel attempted to fix this by using a random offset for each connection but this is not enough to fix the issue. Thus, TCP timestamps should be disabled. This can be done by setting the following with sysctl:

net.ipv4.tcp_timestamps=0

10.5.3 TCP initial sequence numbers

TCP initial sequence numbers (ISNs) are another method of leaking the system time. To mitigate this, you must install the tirdad kernel module which generates random ISNs for connections.

10.5.4 Time synchronization

​ Time synchronization is vital for anonymity and security. A wrong system clock can expose you to clock skew fingerprinting attacks or can be used to feed you outdated HTTPS certificates, bypassing certficate expiry or revocation.



​ The most popular time synchronization method, NTP, is insecure as it is unencrypted and unauthenticated, allowing an attacker to trivially intercept and modify requests. NTP also leaks your local system time in NTP timestamp format which can be used for clock skew fingerprinting, as briefly mentioned before.



​ Thus, you should uninstall any NTP clients and disable systemd-timesyncd if it is in use. Instead of NTP, you can connect to a trusted website over a secure connection (HTTPS or, preferably, a Tor onion service) and extract the current time from the HTTP header. Tools that accomplish this are sdwdate or my own secure-time-sync.

10.6 Keystroke fingerprinting

​ It is possible to fingerprint a person by the manner in which they enter keys on the keyboard. You can be uniquely fingerprinted via your typing speed, pauses in between key presses, the exact time at which each key is pressed and released and so on. It is possible to test this online with KeyTrac.



kloak is a tool that aims to defeat this method of tracking by obfuscating the time intervals between key press and release events. When a key is pressed, it introduces a random delay before it is picked up by the application. Although, this may be frustrating for certain individuals and unsuitable for them.



​ This form of tracking must not be confused with stylometry.

11. File permissions

​ By default, the permissions of files are quite permissive. You should search across your system for files and directories with improper permissions and restrict them. For example, on some distributions such as Debian, users' home directories are world-readable. This can be restricted by executing:

chmod 700 /home/$user

​ A few more examples are /boot, /usr/src and /{,usr/}lib/modules — these contain the kernel image, System.map, and various other files, all of which can leak sensitive information about the kernel. To restrict access to these, execute:

chmod 700 /boot /usr/src /lib/modules /usr/lib/modules

​ On Debian-based distributions, the file permissions must be reserved with dpkg-statoverride. Otherwise, they will be overwritten during an update.



​ Whonix's SUID Disabler and Permission Hardener applies the steps detailed in this section automatically.

11.1 setuid / setgid

​ setuid / SUID allows a user to execute a binary with the privileges of the binary's owner. This is often used to allow unprivileged users to utilize certain functionality that is normally only reserved for the root user. As such, many SUID binaries have a history of privilege escalation security vulnerabilities. setgid / SGID is similar but for groups rather than users. To find all binaries on the system with the setuid or setgid bit, execute:

find / -type f \( -perm -4000 -o -perm -2000 \)

​ You should then remove any unnecessary setuid / setgid bits on programs you don't use, or, replace them with capabilities.



​ To remove the setuid bit, execute:

chmod u-s $path_to_program

​ To remove the setgid bit, execute:

chmod g-s $path_to_program

​ To add a capability to the file instead, execute:

setcap $capability+ep $path_to_program

​ Or, to remove an unnecessary capability, execute:

setcap -r $path_to_program

11.2 umask

​ umask sets the default file permissions for newly created files. The default umask is 0022 which is not very secure as this gives read access to every user on the system for newly created files. To make new files unreadable by anyone other than the owner, edit /etc/profile and add:

umask 0077

12. Core dumps

Core dumps contain the recorded memory of a program at a specific time, usually when that program has crashed. These can contain sensitive information such as passwords and encryption keys so these must be disabled.



​ There are three main ways to disable them: sysctl, systemd and ulimit.

12.1 sysctl

​ Set the following setting via sysctl:

kernel.core_pattern=|/bin/false

12.2 systemd

​ Create /etc/systemd/coredump.conf.d/disable.conf and add:

[Coredump]
Storage=none

12.3 ulimit

​ Edit /etc/security/limits.conf and add:

* hard core 0

12.4 setuid processes

​ Process that run with elevated privileges may still dump their memory even after these settings. To prevent them from doing so, set the following via sysctl:

fs.suid_dumpable=0

13. Swap

​ Similar to core dumps, swapping or paging copies parts of memory to disk which can contain sensitive information. The kernel should be configured to only swap if absolutely necessary with this sysctl:

vm.swappiness=1

14. PAM

PAM is a framework for user authentication. It's what you use when you login. You can make it more secure by requiring strong passwords or enforcing delays upon failed login attempts.



​ To enforce strong passwords, you can use pam_pwquality. It enforces a configurable policy for passwords. For example, if you want passwords to contain a minimum of 16 characters (minlen), at least 6 different characters from the old password (difok), at least 3 digits (dcredit), at least 2 uppercase (ucredit), at least 2 lowercase (lcredit) and at least 3 other characters (ocredit), then edit /etc/pam.d/passwd and add:

password required pam_pwquality.so retry=2 minlen=16 difok=6 dcredit=-3 ucredit=-2 lcredit=-2 ocredit=-3 enforce_for_root
password required pam_unix.so use_authtok sha512 shadow

​ To enforce delays, you can use pam_faildelay. To add a delay of at least 4 seconds between failed login attempts to deter bruteforcing attempts, edit /etc/pam.d/system-login and add:

auth optional pam_faildelay.so delay=4000000

​ "4000000" being 4 seconds in microseconds.

15. Microcode updates

​ Microcode updates are essential to fix critical CPU vulnerabilities such as Meltdown and Spectre, among numerous others. Most distributions include these in their software repositories such as Arch Linux and Debian.

16. IPv6 privacy extensions

IPv6 addresses are generated from your computer's MAC address, making your IPv6 address unique and tied directly to your computer. Privacy extensions generate a random IPv6 address to mitigate this form of tracking. Note that these steps are unnecessary if you have spoofed your MAC address or have disabled IPv6.



​ To enable these, set the following settings via sysctl:

net.ipv6.conf.all.use_tempaddr=2
net.ipv6.conf.default.use_tempaddr=2

16.1 NetworkManager

​ To enable privacy extensions for NetworkManager, edit /etc/NetworkManager/NetworkManager.conf and add:

[connection]
ipv6.ip6-privacy=2

16.2 systemd-networkd

​ To enable privacy extensions for systemd-networkd, create /etc/systemd/network/ipv6-privacy.conf and add:

[Network]
IPv6PrivacyExtensions=kernel

17. Partitioning and mount options

​ File systems should be separated into various partitions to gain fine-grained control over their permissions. Different mount options can be added to restrict what can be done:

  • nodev — Disallow devices.
  • nosuid — Disallow setuid or setgid bits.
  • noexec — Disallow execution of any binaries.

​ These mount options should be set wherever possible in /etc/fstab. If you cannot use separate partitions, then create bind mounts. An example of a more secure /etc/fstab:

/        /          ext4    defaults                              1 1
/home /home ext4 defaults,nosuid,noexec,nodev 1 2
/tmp /tmp ext4 defaults,bind,nosuid,noexec,nodev 1 2
/var /var ext4 defaults,bind,nosuid 1 2
/boot /boot ext4 defaults,nosuid,noexec,nodev 1 2

​ Be aware that noexec can be bypassed via shell scripts.

18. Entropy

18.1 Additional entropy sources

Entropy is basically the randomness collected by an operating system and is crucial for things such as encryption. Hence, it is best to gather as much entropy as possible from a variety of sources by installing additional random number generators like haveged and jitterentropy.



​ For jitterentropy to work properly, the kernel module must be loaded as early as possible by creating /usr/lib/modules-load.d/jitterentropy.conf and adding:

jitterentropy_rng

18.2 RDRAND

RDRAND is a CPU instruction for providing random numbers. It is automatically used by the kernel as an entropy source if it is available; but since it is proprietary and part of the CPU itself, it is impossible to audit and verify its security properties. You are not even able to reverse engineer the code if you wish. This RNG has suffered from vulnerabilities before, some of which may have been backdoors. It is possible to distrust this feature by setting the following boot parameter:

random.trust_cpu=off

19. Editing files as root

​ It is unrecommended to run ordinary text editors as root. Most text editors can do much more than simply edit text files and this can be exploited. For example, open vi as root and enter :sh. You now have a root shell with access to your entire system which an attacker can easily exploit.



​ A solution to this is using sudoedit. This copies the file to a temporary location, opens the text editor as an ordinary user, edits the temporary file and overwrites the original file as root. This way, the actual editor doesn't run as root. To use sudoedit, execute:

sudoedit $path_to_file

​ By default, it uses vi but the default editor can be switched via the EDITOR or SUDO_EDITOR environment variables. For example, to use nano, execute:

EDITOR=nano sudoedit $path_to_file

​ This environment variable can be set globally in /etc/environment.

20. Distribution-specific hardening

20.1 HTTPS package manager mirrors

​ Linux distributions often use HTTP or a mixture of HTTP and HTTPS mirrors by default to download packages from their software repositories. People assume this is fine because package managers verify the signatures of packages before installation. However, historically, there has been multiple bypasses of this. You should configure your package manager to exclusively download from HTTPS mirrors for defence-in-depth.

20.2 APT seccomp-bpf

​ Since Debian Buster, the package manager, APT has supported optional seccomp-bpf filtering. This restricts the syscalls that APT is allowed to execute which can severely limit an attacker's ability to do harm to the system if they attempt to exploit a vulnerability in APT. To enable this, create /etc/apt/apt.conf.d/40sandbox and add:

APT::Sandbox::Seccomp "true";

21. Physical security

21.1 Encryption

​ Full-disk encryption ensures that all data on your drive is encrypted and cannot be read by a physical attacker. Most distributions support enabling encryption during installation. Make sure you set a strong password. You can also encrypt your drive manually with dm-crypt.



​ Be aware that full-disk encryption does not cover /boot. As such, it is still possible to modify the kernel, bootloader and other critical files. To fully protect against tampering you must also implement verified boot.

21.2 BIOS / UEFI hardening

​ If you are still using legacy BIOS then you should migrate to UEFI as to take advantage of newer security features.



​ Most BIOS or UEFI implementations support setting a password. It is best to enable this and set a very strong password. This is a weak protection though as it is trivial to reset the password. It is often stored in volatile memory so an attacker just needs to be able to remove the CMOS battery for a few seconds or they can reset it with a jumper on certain motherboards.



​ You should also disable all unused devices and boot options such as USB booting to reduce attack surface.



​ Updating the BIOS or UEFI is often neglected — make sure you keep them updated. Treat it as important as regular operating system updates.



​ Additionally, refer to the NSA's Hardware and Firmware Security Guidance.

21.3 Bootloader passwords

​ The bootloader executes very early in the boot process and is responsible for loading your operating system. It is very important that you protect your bootloader. Otherwise, it can be tampered with — for example, a local attacker can easily gain a root shell by using init=/bin/bash as a kernel parameter at boot which tells the kernel to execute /bin/bash instead of your normal init system. You can prevent this by setting a password for your bootloader.



​ Setting a bootloader password alone is not enough to fully protect it. You must also setup verified boot as documented below.

21.3.1 GRUB

​ To set a password for GRUB, execute:

grub-mkpasswd-pbkdf2

​ Enter your password and a string will be generated from that password. It will be something like "grub.pbkdf2.sha512.10000.C4009...". Create /etc/grub.d/40_password and add:

set superusers="$username"
password_pbkdf2 $username $password

​ Replace "$password" with the string generated by grub-mkpasswd-pbkdf2. "$username" will be for the superusers that are permitted to use the GRUB command line, edit menu entries, and execute any menu entry. For most people, this will just be "root".



Regenerate your configuration file and GRUB will now be password protected.



​ To restrict only editing the boot parameters and accessing the GRUB console whilst still allowing you to boot, edit /boot/grub/grub.cfg and next to "menuentry '$OSName'", add the "--unrestricted" parameter. For example:

menuentry 'Arch Linux' --unrestricted

​ You will need to regenerate your configuration file again to apply this change.

21.3.2 Syslinux

​ Syslinux can either set a master password or a menu password. A master password is required for booting any entry while a menu password is only required for booting a specific entry.



​ To set a master password for Syslinux, edit /boot/syslinux/syslinux.cfg and add:

MENU MASTER PASSWD $password

​ To set a menu password, edit /boot/syslinux/syslinux.cfg and within a label that has the item you want to password protect, add:

MENU PASSWD $password

​ Replace "$password" with the password you wish to set.



​ These passwords can either be plaintext or hashed with MD5, SHA-1, SHA-256 or SHA-512. It is recommended that you hash your password with a strong hashing algorithim like SHA-256 or SHA-512 first to avoid storing it in plaintext.

21.3.3 systemd-boot

​ systemd-boot has the option to prevent editing the kernel parameters at boot. In the loader.conf file, add:

editor no

​ systemd-boot does not officially support password protecting the kernel parameters editor but you can achieve this with systemd-boot-password.

21.4 Verified boot

Verified boot ensures the integrity of the boot chain and base system by cryptographically verifying them. This can be used to ensure that a physical attacker cannot modify the software on the device. Without verified boot, all of the precautions mentioned above could be bypassed with ease once physical access is gained. Verified boot is not just for physical security as many people assume. It can also be used to prevent remote malware persistence — if an attacker has managed to compromise the entire system and gain extremely high privileges, verified boot will revert their changes upon reboot and ensure they cannot persist.



​ The most common verified boot implementation is UEFI Secure Boot however this by itself is not a complete implementation as this only verifies the bootloader and kernel, meaning there are ways to bypass this:

  • ​ UEFI secure boot alone lacks an immutable root of trust so a physical attacker can still reflash the firmware of the device. To mitigate this, use UEFI secure boot in combination with Intel Boot Guard or AMD Secure Boot.
  • ​ A remote attacker (or a physical attacker when not using encryption) can simply modify any other privileged part of the operating system. For example, if they have the privileges to modify the kernel, then they'd also be able to modify /sbin/init to achieve effectively the same result. Thus, only verifying the kernel and bootloader will not do anything against a remote attacker. To mitigate this, you must verify the base operating system with dm-verity although this is very difficult and cumbersome due to the layout of traditional Linux distributions.

​ In general, it's hard to achieve a respectable verified boot implementation on traditional Linux.

21.5 USBs

​ USB devices present significant attack surface for physical attacks. Example of such attacks are BadUSB and Stuxnet. It is good practice to block all newly connected USBs and only whitelist trusted devices. USBGuard is great for this.



​ You could also use nousb as a kernel boot parameter to disable all USB support in the kernel. If using linux-hardened, you can set the kernel.deny_new_usb=1 sysctl.

21.6 DMA attacks

Direct memory access (DMA) attacks involve gaining complete access to all of system memory by inserting certain physical devices. This can be mitigated via an IOMMU which controls the areas of memory accessible to devices or by blacklisting particularly vulnerable kernel modules.



​ To enable the IOMMU, set the following kernel boot parameters:

intel_iommu=on amd_iommu=on

​ You only need to enable the option for your specific CPU manufacturer but there are no issues with enabling both options.

efi=disable_early_pci_dma

​ This option fixes a hole in the above IOMMU by disabling the busmaster bit on all PCI bridges during very early boot.



​ Furthermore, Thunderbolt and FireWire are often vulnerable to DMA attacks. To disable them, blacklist these kernel modules:

install firewire-core /bin/false
install thunderbolt /bin/false

21.7 Cold boot attacks

​ A cold boot attack occurs when an attacker analyses the data in RAM before it is erased. When using modern RAM, cold boot attacks aren't very practical as RAM usually clears within a few seconds or minutes unless it has been placed inside a cooling solution such as liquid nitrogen or a freezer. An attacker would have to rip out the RAM sticks from your device and expose it to liquid nitrogen all within a few seconds and without the user noticing.



​ If cold boot attacks are part of your threat model, then guard your computer for a few minutes after shutdown to ensure that nobody has access to your RAM sticks. You could also solder the RAM sticks into your motherboard to make it harder for them to be seized. If using a laptop, take out the battery and run directly off the charging cable. Pull out the cable after shutdown to ensure that the RAM has no access to more power to stay alive.



​ In the kernel self-protection boot parameters section, the zeroing of memory at free time option will overwrite sensitive data in memory with zeroes. Furthermore, the hardened memory allocator can purge sensitive data within user space heap memory via the CONFIG_ZERO_ON_FREE configuration option. Despite these though, some data may still remain in memory.



​ Additionally, modern kernels include a reset attack mitigation which commands the firmware to erase data upon shutdown although this requires firmware support.



​ Make sure that you shutdown your computer normally so the mitigations explained above can kick in.



​ If none of the above are adequate for your threat model, you can implement Tails' memory erasure process which erases the majority of memory (with the exception of video memory) and has been proven to be effective.

22. Best practices

Once you have hardened the system as much as you can, you should follow good privacy and security practices:

  1. Disable or remove things you don't need to minimize attack surface.
2. Stay updated. Configure a cron job or init script to update your system daily.
3. Don't leak any information about you or your system, no matter how minor it may seem.
4. Follow general security and privacy advice.

​ Despite the hardening you have done, you must remember that Linux is still a fundamentally flawed operating system and no amount of hardening can ever fix it fully.

Other guides

​ You should perform as much varied research as possible and not rely on a single source of information. One of the largest security problems is the user. These are links to other guides that I find valuable:



Arch Linux Security wiki page



Whonix Documentation



NSA RHEL 5 Hardening Guide (slightly outdated but contains useful information nevertheless)



KSPP recommended kernel settings



kconfig-hardened-check

Glossary

Regenerate GRUB configuration

​ You may need to regenerate your GRUB configuration to apply certain changes you have made to the bootloader. The steps to do this can sometimes differ between different distributions. For example, on distributions such as Arch Linux, you are expected to regenerate your configuration file by executing:

grub-mkconfig -o $path_to_grub_config

​ "$path_to_grub_config" depends on how you have setup your system. It is often either /boot/grub/grub.cfg or /boot/EFI/grub/grub.cfg but you should make sure before executing this command.



​ Alternatively, on distributions like Debian or Ubuntu, you should execute:

update-grub

Capabilities

​ In the Linux kernel, "root privileges" are split up into various different capabilities. This is helpful in applying principle of least privilege — instead of giving a process total root privileges, you can grant them only a specific subset instead. For example, if a program simply needs to set your system time, then it only needs CAP_SYS_TIME rather than total root. This could limit the potential damage that can be done, however, you must still be cautious with granting capabilities as many of them can be abused to gain full root privileges anyway.

Linux Hardening Guide的更多相关文章

  1. Arch Linux Installation Guide

    Arch Linux Installation Guide   timedatectl set-ntp true   sed -i '/Score/{/China/!{n;s/^/#/}}' /etc ...

  2. Linux USB Project

    转自:http://www.linux-usb.org/ Welcome to the home of the Linux USB Project This web site was created ...

  3. P6 Professional Installation and Configuration Guide (Microsoft SQL Server Database) 16 R1

    P6 Professional Installation and Configuration Guide (Microsoft SQL Server Database) 16 R1       May ...

  4. 如何使用Unix/Linux grep命令——磨刀不误砍柴工系列

     http://man.linuxde.net/grep ---------------------------------------------------- 如何使用Unix/Linux gre ...

  5. 我的Linux书架

    原文地址www.cnblogs.com/wwang/archive/2011/01/27/1944406.html 工作几年来,一直从事Linux内核驱动方面的开发.从接触Linux到现在,读过不少L ...

  6. Guide to make CentOS 7 the perfect desktop

    原文地址:  http://www.dedoimedo.com/computers/fedora-pimp.html My original review of CentOS 7 was less e ...

  7. linux 多核

    posix threading programming beej's guide to unix ipc the gnu c library: virtual memory allocation an ...

  8. linux学习过程中所需要看的一些书籍

    入门类 一直认为,在一个系统上学习开发之前,首先需要熟悉这个系统的使用.鉴于天朝的国情,绝大部分人第一个接触的操作系统就是Windows,因此对于这绝大部分人来说,如果要学习Linux开发,学会使用这 ...

  9. linux下sophos,clamav+clamtk杀毒软件

    以deepin为例 avast for linux sophos for linux comodo for linux 目前能够在官网找到. 先说clamav clamav 听说很活跃,clamav是 ...

随机推荐

  1. SpringBoot接口 - API接口有哪些不安全的因素?如何对接口进行签名?

    在以SpringBoot开发后台API接口时,会存在哪些接口不安全的因素呢?通常如何去解决的呢?本文主要介绍API接口有不安全的因素以及常见的保证接口安全的方式,重点实践如何对接口进行签名.@pdai ...

  2. Hive sql 经典题目和 复杂hsq

    案例一 练习:一:将下列数据加载hive表. 员工信息表emp:字段:员工id,员工名字,工作岗位,部门经理,受雇日期,薪水,奖金,部门编号英文名:EMPNO,ENAME,JOB,MGR,HIREDA ...

  3. 事务_基本演示和事务_默认自动提交&手动提交

    事务的基本介绍 概念: 如果一个包含多个步骤的业务操作,被事务管理,那么这些操作要么同时成功,要么同时失败 操作: 开启事务:start transaction; 回滚:rollback; 提交:co ...

  4. python--函数--参数传入分类

    1. 位置参数 调用函数时传入实际参数的数量和位置都必须和定义函数时保持一致. 2. 关键字参数 好处:不用记住形参位置. 所谓关键字就是"键-值"绑定,调用函数时,进行传递. 特 ...

  5. centos安装torch==1.4.0与相关细节

    对于某些直接安装torch==1.4.0报错的情况(没错,就是我遇到了) 在网上查找了,大概的解决方法是先安装一个低版本的torch和torchvision, torchvision是pytorch中 ...

  6. 人工智能不过尔尔,基于Python3深度学习库Keras/TensorFlow打造属于自己的聊天机器人(ChatRobot)

    原文转载自「刘悦的技术博客」https://v3u.cn/a_id_178 聊天机器人(ChatRobot)的概念我们并不陌生,也许你曾经在百无聊赖之下和Siri打情骂俏过,亦或是闲暇之余与小爱同学谈 ...

  7. 超全selenium元素定位XPath、CSS

    说明:在HTML页面中,<p> 是一个标签,<p>hello</p> 是一个元素,元素由一个开始的标签和结束的标签组成.<font color="r ...

  8. C#《原CSharp》第四回 人常见岁月更替 却难知人文相继

    纪芾显然此时并不是很能理解纪老爷子口中是也不是这句话的意思,不过他依然将这个要点记在了心里,方便以后悟出其最终门道的时候进行比对. "今天,我在璃月港北边的一户人家,遇到了一个挺有意思的后生 ...

  9. java-循环的应用环境以及数组的创建

    1.三种循环结构的更佳适用情况: 1)while:"当..."循环 2)do...while:"直到..."循环 要素1与要素3相同时首选do...while ...

  10. python包合集-shutil

    一.简介 shutil是 python 中的高级文件操作模块,与os模块形成互补的关系,os主要提供了文件或文件夹的新建.删除.查看等方法,还提供了对文件以及目录的路径操作.shutil模块提供了移动 ...