pgpool 的配置文件详解

listen_addresses = 'localhost'

                                   # Host name or IP address to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

port =

                                   # Port number

                                   # (change requires restart)

socket_dir = '/tmp'

                                   # Unix domain socket path

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

listen_backlog_multiplier =

                                   # Set the backlog parameter of listen() to

                                   # num_init_children * listen_backlog_multiplier.

                                   # (change requires restart)

serialize_accept = off

                                   # whether to serialize accept() call to avoid thundering herd problem

                                   # (change requires restart)

pcp_listen_addresses = '*'

                                   # Host name or IP address for pcp process to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

pcp_port =

                                   # Port number for pcp

                                   # (change requires restart)

pcp_socket_dir = '/tmp'

                                   # Unix domain socket path for pcp

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

backend_hostname0 = 'localhost'

                                   # Host name or IP address to connect to for backend

backend_port0 =

                                   # Port number for backend

backend_weight0 =

                                   # Weight for backend  (only in load balancing mode)

backend_data_directory0 = '/var/lib/pgsql/data'

                                   # Data directory for backend

backend_flag0 = 'ALLOW_TO_FAILOVER'

                                   # Controls various backend behavior

                                   # ALLOW_TO_FAILOVER, DISALLOW_TO_FAILOVER

                   # or ALWAYS_MASTER

enable_pool_hba = off

                                   # Use pool_hba.conf for client authentication

pool_passwd = 'pool_passwd'

                                   # File name of pool_passwd for md5 authentication.

                                   # "" disables pool_passwd.

                                   # (change requires restart)

authentication_timeout =

                                   # Delay in seconds to complete client authentication

                                   #  means no timeout.

allow_clear_text_frontend_auth = off

                                   # Allow Pgpool-II to use clear text password authentication

                                   # with clients, when pool_passwd does not

                                   # contain the user password

ssl = off

                                   # Enable SSL support

                                   # (change requires restart)

                                   # Path to the SSL private key file

                                   # (change requires restart)

                                   # Path to the SSL public certificate file

                                   # (change requires restart)

                                   # Path to a single PEM format file

                                   # containing CA root certificate(s)

                                   # (change requires restart)

                                   # Directory containing CA root certificate(s)

                                   # (change requires restart)

num_init_children =

                                   # Number of concurrent sessions allowed

                                   # (change requires restart)

max_pool =

                                   # Number of connection pool caches per connection

                                   # (change requires restart)

child_life_time =

                                   # Pool exits after being idle for this many seconds

child_max_connections =

                                   # Pool exits after receiving that many connections

                                   #  means no exit

connection_life_time =

                                   # Connection to backend closes after being idle for this many seconds

                                   #  means no close

client_idle_limit =

                                   # Client is disconnected after being idle for that many seconds

                                   # (even inside an explicit transactions!)

                                   #  means no disconnection

log_destination = 'stderr'

                                   # Where to log

                                   # Valid values are combinations of stderr,

                                   # and syslog. Default to stderr.

log_line_prefix = '%t: pid %p: '   # printf-style string to output at beginning of each log line.

log_connections = off

                                   # Log connections

log_hostname = off

                                   # Hostname will be shown in ps status

                                   # and in logs if connections are logged

log_statement = off

                                   # Log all statements

log_per_node_statement = off

                                   # Log all statements

                                   # with node and backend informations

log_client_messages = off

                                   # Log any client messages

log_standby_delay = 'none'

                                   # Log standby delay

                                   # Valid values are combinations of always,

                                   # if_over_threshold, none

syslog_facility = 'LOCAL0'

                                   # Syslog local facility. Default to LOCAL0

syslog_ident = 'pgpool'

                                   # Syslog program identification string

                                   # Default to 'pgpool'

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   log

                                        #   notice

                                        #   warning

                                        #   error

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   info

                                        #   notice

                                        #   warning

                                        #   error

                                        #   log

                                        #   fatal

                                        #   panic

pid_file_name = '/var/run/pgpool/pgpool.pid'

                                   # PID file name

                                   # Can be specified as relative to the"

                                   # location of pgpool.conf file or

                                   # as an absolute path

                                   # (change requires restart)

logdir = '/var/log/pgpool'

                                   # Directory of pgPool status file

                                   # (change requires restart)

connection_cache = on

                                   # Activate connection pools

                                   # (change requires restart)

                                   # Semicolon separated list of queries

                                   # to be issued at the end of a session

                                   # The default is for 8.3 and later

reset_query_list = 'ABORT; DISCARD ALL'

                                   # The following one is for 8.2 and before

replication_mode = off

                                   # Activate replication mode

                                   # (change requires restart)

replicate_select = off

                                   # Replicate SELECT statements

                                   # when in replication mode

                                   # replicate_select is higher priority than

                                   # load_balance_mode.

insert_lock = on

                                   # Automatically locks a dummy row or a table

                                   # with INSERT statements to keep SERIAL data

                                   # consistency

                                   # Without SERIAL, no lock will be issued

lobj_lock_table = ''

                                   # When rewriting lo_creat command in

                                   # replication mode, specify table name to

                                   # lock

replication_stop_on_mismatch = off

                                   # On disagreement with the packet kind

                                   # sent from backend, degenerate the node

                                   # which is most likely "minority"

                                   # If off, just force to exit this session

failover_if_affected_tuples_mismatch = off

                                   # On disagreement with the number of affected

                                   # tuples in UPDATE/DELETE queries, then

                                   # degenerate the node which is most likely

                                   # "minority".

                                   # If off, just abort the transaction to

                                   # keep the consistency

load_balance_mode = off

                                   # Activate load balancing mode

                                   # (change requires restart)

ignore_leading_white_space = on

                                   # Ignore leading white spaces of each query

white_function_list = ''

                                   # Comma separated list of function names

                                   # that don't write to database

                                   # Regexp are accepted

black_function_list = 'nextval,setval,nextval,setval'

                                   # Comma separated list of function names

                                   # that write to database

                                   # Regexp are accepted

black_query_pattern_list = ''

                                   # Semicolon separated list of query patterns

                                   # that should be sent to primary node

                                   # Regexp are accepted

                                   # valid for streaming replicaton mode only.

database_redirect_preference_list = ''

                                   # comma separated list of pairs of database and node id.

                                   # example: postgres:primary,mydb[-]:,mydb[-]:'

                                   # valid for streaming replicaton mode only.

app_name_redirect_preference_list = ''

                                   # comma separated list of pairs of app name and node id.

                                   # example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'

                                   # valid for streaming replicaton mode only.

allow_sql_comments = off

                                   # if on, ignore SQL comments when judging if load balance or

                                   # query cache is possible.

                                   # If off, SQL comments effectively prevent the judgment

                                   # (pre 3.4 behavior).

disable_load_balance_on_write = 'transaction'    # Load balance behavior when write query is issued

                        # in an explicit transaction.

                        # Note that any query not in an explicit transaction

                        # is not affected by the parameter.

                        # 'transaction' (the default): if a write query is issued,

                        # subsequent read queries will not be load balanced

                        # until the transaction ends.

                        # 'trans_transaction': if a write query is issued,

                        # subsequent read queries in an explicit transaction

                        # will not be load balanced until the session ends.

                        # 'always': if a write query is issued, read queries will

                        # not be load balanced until the session ends.

master_slave_mode = off

                                   # Activate master/slave mode

                                   # (change requires restart)

master_slave_sub_mode = 'stream'

                                   # Master/slave sub mode

                                   # Valid values are combinations stream, slony

                                   # or logical. Default is stream.

                                   # (change requires restart)

sr_check_period =

                                   # Streaming replication check period

                                   # Disabled () by default

sr_check_user = 'nobody'

                                   # Streaming replication check user

                                   # This is necessary even if you disable

                                   # streaming replication delay check with

                                   # sr_check_period =

sr_check_password = ''

                                   # Password for streaming replication check user.

                                   # Leaving it empty will make Pgpool-II to first look for the

                                   # Password in pool_passwd file before using the empty password

sr_check_database = 'postgres'

                                   # Database name for streaming replication check

delay_threshold =

                                   # Threshold before not dispatching query to standby node

                                   # Unit is in bytes

                                   # Disabled () by default

follow_master_command = ''

                                   # Executes this command after master failover

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                   #   %r = new master port number

                                   #   %R = new master database cluster path

                                   #   %% = '%' character

health_check_period =

                                   # Health check period

                                   # Disabled () by default

health_check_timeout =

                                   # Health check timeout

                                   #  means no timeout

health_check_user = 'nobody'

                                   # Health check user

health_check_password = ''

                                   # Password for health check user

                                   # Leaving it empty will make Pgpool-II to first look for the

                                   # Password in pool_passwd file before using the empty password

health_check_database = ''

                                   # Database name for health check. If '', tries 'postgres' frist, then 'template1'

health_check_max_retries =

                                   # Maximum number of times to retry a failed health check before giving up.

health_check_retry_delay =

                                   # Amount of time to wait (in seconds) between retries.

connect_timeout =

                                   # Timeout value in milliseconds before giving up to connect to backend.

                                   # Default is  ms ( second). Flaky network user may want to increase

                                   # the value.  means no timeout.

                                   # Note that this value is not only used for health check,

                                   # but also for ordinary conection to backend.

failover_command = ''

                                   # Executes this command at failover

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                   #   %r = new master port number

                                   #   %R = new master database cluster path

                                   #   %% = '%' character

failback_command = ''

                                   # Executes this command at failback.

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                   #   %r = new master port number

                                   #   %R = new master database cluster path

                                   #   %% = '%' character

failover_on_backend_error = on

                                   # Initiates failover when reading/writing to the

                                   # backend communication socket fails

                                   # If set to off, pgpool will report an

                                   # error and disconnect the session.

detach_false_primary = off

                                   # Detach false primary if on. Only

                                   # valid in streaming replicaton

                                   # mode and with PostgreSQL 9.6 or

                                   # after.

search_primary_node_timeout =

                                   # Timeout in seconds to search for the

                                   # primary node when a failover occurs.

                                   #  means no timeout, keep searching

                                   # for a primary node forever.

recovery_user = 'nobody'

                                   # Online recovery user

recovery_password = ''

                                   # Online recovery password

                                   # Leaving it empty will make Pgpool-II to first look for the

                                   # Password in pool_passwd file before using the empty password

recovery_1st_stage_command = ''

                                   # Executes a command in first stage

recovery_2nd_stage_command = ''

                                   # Executes a command in second stage

recovery_timeout =

                                   # Timeout in seconds to wait for the

                                   # recovering node's postmaster to start up

                                   #  means no wait

client_idle_limit_in_recovery =

                                   # Client is disconnected after being idle

                                   # for that many seconds in the second stage

                                   # of online recovery

                                   #  means no disconnection

                                   # - means immediate disconnection

use_watchdog = off

                                    # Activates watchdog

                                    # (change requires restart)

trusted_servers = ''

                                    # trusted server list which are used

                                    # to confirm network connection

                                    # (hostA,hostB,hostC,...)

                                    # (change requires restart)

ping_path = '/bin'

                                    # ping command path

                                    # (change requires restart)

wd_hostname = ''

                                    # Host name or IP address of this watchdog

                                    # (change requires restart)

wd_port =

                                    # port number for watchdog service

                                    # (change requires restart)

wd_priority =

                                    # priority of this watchdog in leader election

                                    # (change requires restart)

wd_authkey = ''

                                    # Authentication key for watchdog communication

                                    # (change requires restart)

wd_ipc_socket_dir = '/tmp'

                                    # Unix domain socket path for watchdog IPC socket

                                    # The Debian package defaults to

                                    # /var/run/postgresql

                                    # (change requires restart)

delegate_IP = ''

                                    # delegate IP address

                                    # If this is empty, virtual IP never bring up.

                                    # (change requires restart)

if_cmd_path = '/sbin'

                                    # path to the directory where if_up/down_cmd exists

                                    # (change requires restart)

if_up_cmd = 'ip addr add $_IP_$/24 dev eth0 label eth0:0'

                                    # startup delegate IP command

                                    # (change requires restart)

if_down_cmd = 'ip addr del $_IP_$/24 dev eth0'

                                    # shutdown delegate IP command

                                    # (change requires restart)

arping_path = '/usr/sbin'

                                    # arping command path

                                    # (change requires restart)

arping_cmd = 'arping -U $_IP_$ -w 1'

                                    # arping command

                                    # (change requires restart)

clear_memqcache_on_escalation = on

                                    # Clear all the query cache on shared memory

                                    # when standby pgpool escalate to active pgpool

                                    # (= virtual IP holder).

                                    # This should be off if client connects to pgpool

                                    # not using virtual IP.

                                    # (change requires restart)

wd_escalation_command = ''

                                    # Executes this command at escalation on new active pgpool.

                                    # (change requires restart)

wd_de_escalation_command = ''

                                    # Executes this command when master pgpool resigns from being master.

                                    # (change requires restart)

failover_when_quorum_exists = on

                                    # Only perform backend node failover

                                    # when the watchdog cluster holds the quorum

                                    # (change requires restart)

failover_require_consensus = on

                                    # Perform failover when majority of Pgpool-II nodes

                                    # aggrees on the backend node status change

                                    # (change requires restart)

allow_multiple_failover_requests_from_node = off

                                    # A Pgpool-II node can cast multiple votes

                                    # for building the consensus on failover

                                    # (change requires restart)

wd_monitoring_interfaces_list = ''  # Comma separated list of interfaces names to monitor.

                                    # if any interface from the list is active the watchdog will

                                    # consider the network is fine

                                    # 'any' to enable monitoring on all interfaces except loopback

                                    # '' to disable monitoring

                                    # (change requires restart)

wd_lifecheck_method = 'heartbeat'

                                    # Method of watchdog lifecheck ('heartbeat' or 'query' or 'external')

                                    # (change requires restart)

wd_interval =

                                    # lifecheck interval (sec) >

                                    # (change requires restart)

wd_heartbeat_port =

                                    # Port number for receiving heartbeat signal

                                    # (change requires restart)

wd_heartbeat_keepalive =

                                    # Interval time of sending heartbeat signal (sec)

                                    # (change requires restart)

wd_heartbeat_deadtime =

                                    # Deadtime interval for heartbeat signal (sec)

                                    # (change requires restart)

heartbeat_destination0 = 'host0_ip1'

                                    # Host name or IP address of destination

                                    # for sending heartbeat signal.

                                    # (change requires restart)

heartbeat_destination_port0 =

                                    # Port number of destination  for sending

                                    # heartbeat signal. Usually this is the

                                    # same as wd_heartbeat_port.

                                    # (change requires restart)

heartbeat_device0 = ''

                                    # Name of NIC device (such like 'eth0')

                                    # used for sending/receiving heartbeat

                                    # signal to/from destination .

                                    # This works only when this is not empty

                                    # and pgpool has root privilege.

                                    # (change requires restart)

wd_life_point =

                                    # lifecheck retry times

                                    # (change requires restart)

wd_lifecheck_query = 'SELECT 1'

                                    # lifecheck query to pgpool from watchdog

                                    # (change requires restart)

wd_lifecheck_dbname = 'template1'

                                    # Database name connected for lifecheck

                                    # (change requires restart)

wd_lifecheck_user = 'nobody'

                                    # watchdog user monitoring pgpools in lifecheck

                                    # (change requires restart)

wd_lifecheck_password = ''

                                    # Password for watchdog user in lifecheck

                                    # Leaving it empty will make Pgpool-II to first look for the

                                    # Password in pool_passwd file before using the empty password

                                    # (change requires restart)

                                    # Host name or IP address to connect to for other pgpool

                                    # (change requires restart)

                                    # Port number for other pgpool

                                    # (change requires restart)

                                    # Port number for other watchdog

                                    # (change requires restart)

relcache_expire =

                                   # Life time of relation cache in seconds.

                                   #  means no cache expiration(the default).

                                   # The relation cache is used for cache the

                                   # query result against PostgreSQL system

                                   # catalog to obtain various information

                                   # including table structures or if it's a

                                   # temporary table or not. The cache is

                                   # maintained in a pgpool child local memory

                                   # and being kept as long as it survives.

                                   # If someone modify the table by using

                                   # ALTER TABLE or some such, the relcache is

                                   # not consistent anymore.

                                   # For this purpose, cache_expiration

                                   # controls the life time of the cache.

relcache_size =

                                   # Number of relation cache

                                   # entry. If you see frequently:

                                   # "pool_search_relcache: cache replacement happend"

                                   # in the pgpool log, you might want to increate this number.

check_temp_table = on

                                   # If on, enable temporary table check in SELECT statements.

                                   # This initiates queries against system catalog of primary/master

                                   # thus increases load of master.

                                   # If you are absolutely sure that your system never uses temporary tables

                                   # and you want to save access to primary/master, you could turn this off.

                                   # Default is on.

check_unlogged_table = on

                                   # If on, enable unlogged table check in SELECT statements.

                                   # This initiates queries against system catalog of primary/master

                                   # thus increases load of master.

                                   # If you are absolutely sure that your system never uses unlogged tables

                                   # and you want to save access to primary/master, you could turn this off.

                                   # Default is on.

memory_cache_enabled = off

                                   # If on, use the memory cache functionality, off by default

                                   # (change requires restart)

memqcache_method = 'shmem'

                                   # Cache storage method. either 'shmem'(shared memory) or

                                   # 'memcached'. 'shmem' by default

                                   # (change requires restart)

memqcache_memcached_host = 'localhost'

                                   # Memcached host name or IP address. Mandatory if

                                   # memqcache_method = 'memcached'.

                                   # Defaults to localhost.

                                   # (change requires restart)

memqcache_memcached_port =

                                   # Memcached port number. Mondatory if memqcache_method = 'memcached'.

                                   # Defaults to .

                                   # (change requires restart)

memqcache_total_size =

                                   # Total memory size in bytes for storing memory cache.

                                   # Mandatory if memqcache_method = 'shmem'.

                                   # Defaults to 64MB.

                                   # (change requires restart)

memqcache_max_num_cache =

                                   # Total number of cache entries. Mandatory

                                   # if memqcache_method = 'shmem'.

                                   # Each cache entry consumes  bytes on shared memory.

                                   # Defaults to ,,(.8MB).

                                   # (change requires restart)

memqcache_expire =

                                   # Memory cache entry life time specified in seconds.

                                   #  means infinite life time.  by default.

                                   # (change requires restart)

memqcache_auto_cache_invalidation = on

                                   # If on, invalidation of query cache is triggered by corresponding

                                   # DDL/DML/DCL(and memqcache_expire).  If off, it is only triggered

                                   # by memqcache_expire.  on by default.

                                   # (change requires restart)

memqcache_maxcache =

                                   # Maximum SELECT result size in bytes.

                                   # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.

                                   # (change requires restart)

memqcache_cache_block_size =

                                   # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.

                                   # Defaults to 1MB.

                                   # (change requires restart)

memqcache_oiddir = '/var/log/pgpool/oiddir'

                                      # Temporary work directory to record table oids

                                   # (change requires restart)

white_memqcache_table_list = ''

                                   # Comma separated list of table names to memcache

                                   # that don't write to database

                                   # Regexp are accepted

black_memqcache_table_list = ''

                                   # Comma separated list of table names not to memcache

                                   # that don't write to database

                                   # Regexp are accepted

pgpool 的配置文件详解的更多相关文章

quartz配置文件详解
quartz配置文件详解(转载) quartz学习总结: 一.关于job: 用Quartz的行话讲,作业是一个执行任务的简单Java类.任务可以是任何Java代码.只需你实现org.qu ...
WebConfig配置文件详解
今天看到博客园一位朋友整理的一个WebConfig配置文件详解,觉得不错,转载一下: <?xml version="1.0"?> <!--注意: 除了手动编辑此文 ...
tomcat配置文件详解
Tomcat系列之服务器的安装与配置以及各组件详解 tomcat 配置文件详解
ubuntu nginx 安装以及配置文件详解
1.到nginx官网下载源码包.最好下载稳定版本,nginx官网http://www.nginx.org/ 2.安装nginx依赖包运行命令: sudo apt-get install libssl- ...
Spring配置文件详解 – applicationContext.xml文件路径
Spring配置文件详解 – applicationContext.xml文件路径 Java编程 spring的配置文件applicationContext.xml的默 ...
spring配置文件详解--真的蛮详细
spring配置文件详解--真的蛮详细转自: http://book.51cto.com/art/201004/193743.htm 此处详细的为我们讲解了spring2.5的实现原理,感觉非常 ...
net-snmp配置文件详解
net-snmp配置文件详解 net-snmp的配置文件是有一定的层次结构的,配置起来也很方便.网上找了很多资料,大概把这个配置文件的各个信息搞懂了一点.其实在net-snmp的EXAMPLE.con ...
Rsyslog配置文件详解
Rsyslog配置文件详解https://my.oschina.net/0757/blog/198329 # Save boot messages also to boot.log 启动的相关信息lo ...
（原创）LAMP搭建之二：apache配置文件详解（中英文对照版）
LAMP搭建之二:apache配置文件详解(中英文对照版) # This is the main Apache server configuration file. It contains the # ...

随机推荐

无法写入配置文件...需要在IIS中手动创建此虚拟目录,才可以打开此项目
无妄之灾之前闲着没事写了一个webapi项目,今天下了班闲来无事就像拿出来改改,没想到打开的时候就提示出现错误. 没错就是这货,其实也不是第一次遇见这个问题了,但是之前一直没有找到解决方案,在网 ...
记一次SQL PLUS 不能登录的异常处理
记一次SQL PLUS 不能登录的异常处理现象通过远程PLSQL Developer 访问数据发现卡死没响应. 通过Sqlplus 访问数据同样hang死在登录界面,且不能通过Ctrl+C取消 [ ...
Python字典取键、值对
1. 取键:keys()方法 #spyder bb={'人才/可怕':23,'伏地魔&波特':'army','哈哈哈,人才,回合':'hhh'} for ii in bb.keys(): pr ...
Linux：入门基础
一.操作Linux必知必会基础知识二.在Linux命令下查看命令帮助信息三.Linux挂机重启注销命令四.Linux显示系统IP地址一.操作Linux必知必会基础知识 1.Linux命令行组成 ...
kali系统无法使用ll命令
ll命令:也就是ls -l的缩写方式. 重装kali系统之后,发现无法使用ll命令了,于是写一个笔记记录一下如何添加ll命令. 解决方法: vim ~/.bashrc 将alias ll=’ls -l ...
JavaScript（ES6之前）数组方法总结
一.数组的创建 1.使用 Array 构造函数 var arr1 = new Array(); // 创建一个空数组 var arr2 = new Array(20); // 创建一个包含20项的数组 ...
async/await中reject的问题
promise 返回的 resolve 对象可能用 await 去接,但是 reject 无法用 await 接收到,所以要用 try catch 去处理例如发送邮件的接口设置: async fun ...
ASP.NET六大巨头——内置对象（2）
前面讲了三个内置对象,后面来探究一下另外三个内置对象Session.Server和Cookie,Session对象就是服务器给客户端的一个编号:Server对象提供对服务器上的方法和属性的访问:coo ...
python 实现定时任务
需求: 想实现每周一到周五下班钉钉打卡提醒,每周四发周报提醒使用了二种方法实现一:apscheduler,代码如下 import json,requests,datetime from apsc ...
Liunx - 命令整理
## Liunx 常用命令 ## ## 注意,在Linux中,文件没有创建时间. 1. ls : 查看当前文件夹下的所有文件 2. mkdir -- 创建一个新的文件夹 - mkdir 参数文件名 ...

pgpool 的配置文件详解

pgpool 的配置文件详解的更多相关文章

随机推荐

热门专题