Hadoop2.7.7_HA高可用部署

1. Hadoop的HA机制

　　前言：正式引入HA机制是从hadoop2.0开始，之前的版本中没有HA机制

1.1. HA的运作机制

（1）hadoop-HA集群运作机制介绍

　　所谓HA，即高可用（7*24小时不中断服务）

　　实现高可用最关键的是消除单点故障

　　hadoop-ha严格来说应该分成各个组件的HA机制——HDFS的HA、YARN的HA

（2）HDFS的HA机制详解

　　通过双namenode消除单点故障

　　双namenode协调工作的要点：

　　A、元数据管理方式需要改变：

　　　　内存中各自保存一份元数据

　　　　 Edits日志只能有一份，只有Active状态的namenode节点可以做写操作

　　　　两个namenode都可以读取edits

　　　　共享的edits放在一个共享存储中管理（qjournal和NFS两个主流实现）

　　B、需要一个状态管理功能模块

　　　　实现了一个zkfailover，常驻在每一个namenode所在的节点

　　　　每一个zkfailover负责监控自己所在namenode节点，利用zk进行状态标识

　　　　当需要进行状态切换时，由zkfailover来负责切换

　　　　 切换时需要防止brain split现象的发生

1.2. HDFS-HA图解

2. 主机规划

主机名称	外网IP	内网IP	操作系统	备注	安装软件	运行进程
mini01	10.0.0.111	172.16.1.111	CentOS 7.4	ssh port:22	jdk、hadoop	NameNode、DFSZKFailoverController(zkfc)
mini02	10.0.0.112	172.16.1.112	CentOS 7.4	ssh port:22	jdk、hadoop	NameNode、DFSZKFailoverController(zkfc)
mini03	10.0.0.113	172.16.1.113	CentOS 7.4	ssh port:22	jdk、hadoop、zookeeper	ResourceManager
mini04	10.0.0.114	172.16.1.114	CentOS 7.4	ssh port:22	jdk、hadoop、zookeeper	ResourceManager
mini05	10.0.0.115	172.16.1.115	CentOS 7.4	ssh port:22	jdk、hadoop、zookeeper	DataNode、NodeManager、JournalNode、QuorumPeerMain
mini06	10.0.0.116	172.16.1.116	CentOS 7.4	ssh port:22	jdk、hadoop、zookeeper	DataNode、NodeManager、JournalNode、QuorumPeerMain
mini07	10.0.0.117	172.16.1.117	CentOS 7.4	ssh port:22	jdk、hadoop、zookeeper	DataNode、NodeManager、JournalNode、QuorumPeerMain

1	注意：针对HA模式，就不需要SecondaryNameNode了，因为STANDBY状态的namenode会负责做checkpoint

　　

Linux添加hosts信息，保证每台都可以相互ping通

 1 [root@mini01 ~]# cat /etc/hosts
 2 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 3 ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 4
 5 10.0.0.111    mini01
 6 10.0.0.112    mini02
 7 10.0.0.113    mini03
 8 10.0.0.114    mini04
 9 10.0.0.115    mini05
10 10.0.0.116    mini06
11 10.0.0.117    mini07

Windows的hosts文件修改

1 # 文件位置C:\Windows\System32\drivers\etc   在hosts中追加如下内容
2 …………………………………………
3 10.0.0.111    mini01
4 10.0.0.112    mini02
5 10.0.0.113    mini03
6 10.0.0.114    mini04
7 10.0.0.115    mini05
8 10.0.0.116    mini06
9 10.0.0.117    mini07

3. 添加用户账号

1 # 使用一个专门的用户，避免直接使用root用户
2 # 添加用户、指定家目录并指定用户密码
3 useradd -d /app yun && echo '123456' | /usr/bin/passwd --stdin yun
4 # sudo提权
5 echo "yun  ALL=(ALL)       NOPASSWD: ALL" >>  /etc/sudoers
6 # 让其它普通用户可以进入该目录查看信息
7 chmod 755 /app/

4. 实现yun用户免秘钥登录

 1 要求：根据规划实现 mini01 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 2               实现 mini02 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 3               实现 mini03 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 4               实现 mini04 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 5               实现 mini05 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 6               实现 mini06 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 7               实现 mini07 到 mini01、mini02、mini03、mini04、mini05、mini06、mini07 免秘钥登录
 8
 9 # 可以使用ip也可以是hostname  但是由于我们计划使用的是 hostname 方式交互，所以使用hostname
10 # 同时hostname方式分发，可以通过hostname远程登录，也可以IP远程登录

具体过程就不多说了，请参见 Hadoop2.7.6_01_部署

5. Jdk【java8】

具体过程就不多说了，请参见 Hadoop2.7.6_01_部署

6. Zookeeper部署

根据规划zookeeper部署在mini03、mini04、mini05、mini06、mini07上

6.1. 配置信息

 1 [yun@mini03 conf]$ pwd
 2 /app/zookeeper/conf
 3 [yun@mini03 conf]$ vim zoo.cfg
 4 #单个客户端与单台服务器之间的连接数的限制，是ip级别的，默认是60，如果设置为0，那么表明不作任何限制。
 5 maxClientCnxns=1500
 6 # The number of milliseconds of each tick
 7 tickTime=2000
 8 # The number of ticks that the initial
 9 # synchronization phase can take
10 initLimit=10
11 # The number of ticks that can pass between
12 # sending a request and getting an acknowledgement
13 syncLimit=5
14 # the directory where the snapshot is stored.
15 # do not use /tmp for storage, /tmp here is just
16 # example sakes.
17 # dataDir=/tmp/zookeeper
18 dataDir=/app/bigdata/zookeeper/data
19 # the port at which the clients will connect
20 clientPort=2181
21 #
22 # Be sure to read the maintenance section of the
23 # administrator guide before turning on autopurge.
24 #
25 # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
26 #
27 # The number of snapshots to retain in dataDir
28 #autopurge.snapRetainCount=3
29 # Purge task interval in hours
30 # Set to "0" to disable auto purge feature
31 #autopurge.purgeInterval=1
32
33 # leader和follow通信端口和投票选举端口
34 server.3=mini03:2888:3888
35 server.4=mini04:2888:3888
36 server.5=mini05:2888:3888
37 server.6=mini06:2888:3888
38 server.7=mini07:2888:3888

6.2. 添加myid文件

1 [yun@mini03 data]$ pwd
2 /app/bigdata/zookeeper/data
3 [yun@mini03 data]$ vim myid   # 其中mini03的myid 为3；mini04的myid 为4；mini05的myid 为5；mini06的myid 为6；mini07的myid 为7
4 3

6.3. 启动zk服务

 1 # 依次在启动mini03、mini04、mini05、mini06、mini07 zk服务
 2 [yun@mini03 ~]$ cd zookeeper/bin/
 3 [yun@mini03 bin]$ pwd
 4 /app/zookeeper/bin
 5 [yun@mini03 bin]$ ll
 6 total 56
 7 -rwxr-xr-x 1 yun yun   238 Oct  1  2012 README.txt
 8 -rwxr-xr-x 1 yun yun  1909 Oct  1  2012 zkCleanup.sh
 9 -rwxr-xr-x 1 yun yun  1049 Oct  1  2012 zkCli.cmd
10 -rwxr-xr-x 1 yun yun  1512 Oct  1  2012 zkCli.sh
11 -rwxr-xr-x 1 yun yun  1333 Oct  1  2012 zkEnv.cmd
12 -rwxr-xr-x 1 yun yun  2599 Oct  1  2012 zkEnv.sh
13 -rwxr-xr-x 1 yun yun  1084 Oct  1  2012 zkServer.cmd
14 -rwxr-xr-x 1 yun yun  5467 Oct  1  2012 zkServer.sh
15 -rw-rw-r-- 1 yun yun 17522 Jun 28 21:01 zookeeper.out
16 [yun@mini03 bin]$ ./zkServer.sh start
17 JMX enabled by default
18 Using config: /app/zookeeper/bin/../conf/zoo.cfg
19 Starting zookeeper ... STARTED

6.4. 查询运行状态

 1 # 其中mini03、mini04、mini06、mini07状态如下
 2 [yun@mini03 bin]$ ./zkServer.sh status
 3 JMX enabled by default
 4 Using config: /app/zookeeper/bin/../conf/zoo.cfg
 5 Mode: follower
 6
 7 # 其中mini05 状态如下
 8 [yun@mini05 bin]$ ./zkServer.sh status
 9 JMX enabled by default
10 Using config: /app/zookeeper/bin/../conf/zoo.cfg
11 Mode: leader

PS：4个follower 1个leader

7. Hadoop部署与配置修改

　　注意：每台机器的Hadoop以及配置相同

7.1. 部署

 1 [yun@mini01 software]$ pwd
 2 /app/software
 3 [yun@mini01 software]$ ll
 4 total 194152
 5 -rw-r--r-- 1 yun yun 198811365 Jun  8 16:36 CentOS-7.4_hadoop-2.7.6.tar.gz
 6 [yun@mini01 software]$ tar xf CentOS-7.4_hadoop-2.7.6.tar.gz
 7 [yun@mini01 software]$ mv hadoop-2.7.6/ /app/
 8 [yun@mini01 software]$ cd
 9 [yun@mini01 ~]$ ln -s hadoop-2.7.6/ hadoop
10 [yun@mini01 ~]$ ll
11 total 4
12 lrwxrwxrwx  1 yun yun   13 Jun  9 16:21 hadoop -> hadoop-2.7.6/
13 drwxr-xr-x  9 yun yun  149 Jun  8 16:36 hadoop-2.7.6
14 lrwxrwxrwx  1 yun yun   12 May 26 11:18 jdk -> jdk1.8.0_112
15 drwxr-xr-x  8 yun yun  255 Sep 23  2016 jdk1.8.0_112

7.2. 环境变量

1 [root@mini01 profile.d]# pwd
2 /etc/profile.d
3 [root@mini01 profile.d]# vim hadoop.sh
4 export HADOOP_HOME="/app/hadoop"
5 export PATH=$HADOOP_HOME/bin:$HADOOP_HOME/sbin:$PATH
6
7 [root@mini01 profile.d]# source /etc/profile  # 生效

7.3. core-site.xml

 1 [yun@mini01 hadoop]$ pwd
 2 /app/hadoop/etc/hadoop
 3 [yun@mini01 hadoop]$ vim core-site.xml
 4 <?xml version="1.0" encoding="UTF-8"?>
 5 <?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
 6 <!--
 7 ……………………
 8 -->
 9
10 <!-- Put site-specific property overrides in this file. -->
11
12 <configuration>
13   <!-- 指定hdfs的nameservice为bi -->
14   <property>
15     <name>fs.defaultFS</name>
16     <value>hdfs://bi/</value>
17   </property>
18
19   <!-- 指定hadoop临时目录 -->
20   <property>
21     <name>hadoop.tmp.dir</name>
22     <value>/app/hadoop/tmp</value>
23   </property>
24
25   <!-- 指定zookeeper地址 -->
26   <property>
27     <name>ha.zookeeper.quorum</name>
28     <value>mini03:2181,mini04:2181,mini05:2181,mini06:2181,mini07:2181</value>
29   </property>
30
31 </configuration>

7.4. hdfs-site.xml

 1 [yun@mini01 hadoop]$ pwd
 2 /app/hadoop/etc/hadoop
 3 [yun@mini01 hadoop]$ vim hdfs-site.xml
 4 <?xml version="1.0" encoding="UTF-8"?>
 5 <?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
 6 <!--
 7   ……………………
 8 -->
 9
10 <!-- Put site-specific property overrides in this file. -->
11
12 <configuration>
13   <!--指定hdfs的nameservice为bi，需要和core-site.xml中的保持一致 -->
14   <property>
15     <name>dfs.nameservices</name>
16     <value>bi</value>
17   </property>
18
19   <!-- bi下面有两个NameNode，分别是nn1，nn2 -->
20   <property>
21     <name>dfs.ha.namenodes.bi</name>
22     <value>nn1,nn2</value>
23   </property>
24
25   <!-- nn1的RPC通信地址 -->
26   <property>
27     <name>dfs.namenode.rpc-address.bi.nn1</name>
28     <value>mini01:9000</value>
29   </property>
30   <!-- nn1的http通信地址 -->
31   <property>
32     <name>dfs.namenode.http-address.bi.nn1</name>
33     <value>mini01:50070</value>
34   </property>
35
36   <!-- nn2的RPC通信地址 -->
37   <property>
38     <name>dfs.namenode.rpc-address.bi.nn2</name>
39     <value>mini02:9000</value>
40   </property>
41   <!-- nn2的http通信地址 -->
42   <property>
43     <name>dfs.namenode.http-address.bi.nn2</name>
44     <value>mini02:50070</value>
45   </property>
46
47   <!-- 指定NameNode的edits元数据在JournalNode上的存放位置 -->
48   <property>
49     <name>dfs.namenode.shared.edits.dir</name>
50     <value>qjournal://mini05:8485;mini06:8485;mini07:8485/bi</value>
51   </property>
52
53   <!-- 指定JournalNode在本地磁盘存放数据的位置 -->
54   <property>
55     <name>dfs.journalnode.edits.dir</name>
56     <value>/app/hadoop/journaldata</value>
57   </property>
58
59   <!-- 开启NameNode失败自动切换 -->
60   <property>
61     <name>dfs.ha.automatic-failover.enabled</name>
62     <value>true</value>
63   </property>
64
65   <!-- 配置失败自动切换实现方式 -->
66   <property>
67     <name>dfs.client.failover.proxy.provider.bi</name>
68     <value>org.apache.hadoop.hdfs.server.namenode.ha.ConfiguredFailoverProxyProvider</value>
69   </property>
70
71   <!-- 配置隔离机制方法，多个机制用换行分割，即每个机制暂用一行-->
72   <!-- 其中shell(/bin/true) 表示可执行一个脚本  比如 shell(/app/yunwei/hadoop_fence.sh) -->
73   <property>
74     <name>dfs.ha.fencing.methods</name>
75     <value>
76       sshfence
77       shell(/bin/true)
78     </value>
79   </property>
80
81   <!-- 使用sshfence隔离机制时需要ssh免登陆 -->
82   <property>
83     <name>dfs.ha.fencing.ssh.private-key-files</name>
84     <value>/app/.ssh/id_rsa</value>
85   </property>
86
87   <!-- 配置sshfence隔离机制超时时间 单位：毫秒 -->
88   <property>
89     <name>dfs.ha.fencing.ssh.connect-timeout</name>
90     <value>30000</value>
91   </property>
92
93
94 </configuration>

7.5. mapred-site.xml

 1 [yun@mini01 hadoop]$ pwd
 2 /app/hadoop/etc/hadoop
 3 [yun@mini01 hadoop]$ cp -a mapred-site.xml.template mapred-site.xml
 4 [yun@mini01 hadoop]$ vim mapred-site.xml
 5 <?xml version="1.0"?>
 6 <?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
 7 <!--
 8   ……………………
 9 -->
10
11 <!-- Put site-specific property overrides in this file. -->
12
13 <configuration>
14   <!-- 指定mr框架为yarn方式 -->
15   <property>
16     <name>mapreduce.framework.name</name>
17     <value>yarn</value>
18   </property>
19
20 </configuration>

7.6. yarn-site.xml

 1 [yun@mini01 hadoop]$ pwd
 2 /app/hadoop/etc/hadoop
 3 [yun@mini01 hadoop]$ vim yarn-site.xml
 4 <?xml version="1.0"?>
 5 <!--
 6   ……………………
 7 -->
 8 <configuration>
 9
10 <!-- Site specific YARN configuration properties -->
11   <!-- 开启RM高可用 -->
12   <property>
13     <name>yarn.resourcemanager.ha.enabled</name>
14     <value>true</value>
15   </property>
16
17   <!-- 指定RM的cluster id -->
18   <property>
19     <name>yarn.resourcemanager.cluster-id</name>
20     <value>yrc</value>
21   </property>
22
23   <!-- 指定RM的名字 -->
24   <property>
25     <name>yarn.resourcemanager.ha.rm-ids</name>
26     <value>rm1,rm2</value>
27   </property>
28
29   <!-- 分别指定RM的地址 -->
30   <property>
31     <name>yarn.resourcemanager.hostname.rm1</name>
32     <value>mini03</value>
33   </property>
34   <property>
35     <name>yarn.resourcemanager.hostname.rm2</name>
36     <value>mini04</value>
37   </property>
38
39   <!-- 指定zk集群地址 -->
40   <property>
41     <name>yarn.resourcemanager.zk-address</name>
42     <value>mini03:2181,mini04:2181,mini05:2181,mini06:2181,mini07:2181</value>
43   </property>
44
45   <!-- reduce 获取数据的方式 -->
46   <property>
47     <name>yarn.nodemanager.aux-services</name>
48     <value>mapreduce_shuffle</value>
49   </property>
50
51
52 </configuration>

7.7. 修改slaves

slaves是指定子节点的位置，因为要在mini01上启动HDFS、在mini03启动yarn，所以mini01上的slaves文件指定的是datanode的位置，mini03上的slaves文件指定的是nodemanager的位置

1 [yun@mini01 hadoop]$ pwd
2 /app/hadoop/etc/hadoop
3 [yun@mini01 hadoop]$ vim slaves
4 mini05
5 mini06
6 mini07

PS：改后配置后，将这些配置拷到其他Hadoop机器

8. 启动相关服务

　　注意：第一次启动时严格按照下面的步骤！！！！！！！

8.1. 启动zookeeper集群

前面已经启动了，这里就不说了

8.2. 启动journalnode

1 # 根据规划在mini05、mini06、mini07 启动
2 # 在第一次格式化的时候需要先启动journalnode   之后就不必了
3 [yun@mini05 ~]$ hadoop-daemon.sh start journalnode  # 已经配置环境变量，所以不用进入到响应的目录
4 starting journalnode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-journalnode-mini05.out
5 [yun@mini05 ~]$ jps
6 1281 QuorumPeerMain
7 1817 Jps
8 1759 JournalNode

8.3. 格式化HDFS

 1 # 在mini01上执行命令
 2 [yun@mini01 ~]$ hdfs namenode -format
 3 18/06/30 18:29:12 INFO namenode.NameNode: STARTUP_MSG:
 4 /************************************************************
 5 STARTUP_MSG: Starting NameNode
 6 STARTUP_MSG:   host = mini01/10.0.0.111
 7 STARTUP_MSG:   args = [-format]
 8 STARTUP_MSG:   version = 2.7.6
 9 STARTUP_MSG:   classpath = ………………
10 STARTUP_MSG:   build = Unknown -r Unknown; compiled by 'root' on 2018-06-08T08:30Z
11 STARTUP_MSG:   java = 1.8.0_112
12 ************************************************************/
13 18/06/30 18:29:12 INFO namenode.NameNode: registered UNIX signal handlers for [TERM, HUP, INT]
14 18/06/30 18:29:12 INFO namenode.NameNode: createNameNode [-format]
15 Formatting using clusterid: CID-2385f26e-72e6-4935-aa09-47848b5ba4be
16 18/06/30 18:29:13 INFO namenode.FSNamesystem: No KeyProvider found.
17 18/06/30 18:29:13 INFO namenode.FSNamesystem: fsLock is fair: true
18 18/06/30 18:29:13 INFO namenode.FSNamesystem: Detailed lock hold time metrics enabled: false
19 18/06/30 18:29:13 INFO blockmanagement.DatanodeManager: dfs.block.invalidate.limit=1000
20 18/06/30 18:29:13 INFO blockmanagement.DatanodeManager: dfs.namenode.datanode.registration.ip-hostname-check=true
21 18/06/30 18:29:13 INFO blockmanagement.BlockManager: dfs.namenode.startup.delay.block.deletion.sec is set to 000:00:00:00.000
22 18/06/30 18:29:13 INFO blockmanagement.BlockManager: The block deletion will start around 2018 Jun 30 18:29:13
23 18/06/30 18:29:13 INFO util.GSet: Computing capacity for map BlocksMap
24 18/06/30 18:29:13 INFO util.GSet: VM type       = 64-bit
25 18/06/30 18:29:13 INFO util.GSet: 2.0% max memory 966.7 MB = 19.3 MB
26 18/06/30 18:29:13 INFO util.GSet: capacity      = 2^21 = 2097152 entries
27 18/06/30 18:29:13 INFO blockmanagement.BlockManager: dfs.block.access.token.enable=false
28 18/06/30 18:29:13 INFO blockmanagement.BlockManager: defaultReplication         = 3
29 18/06/30 18:29:13 INFO blockmanagement.BlockManager: maxReplication             = 512
30 18/06/30 18:29:13 INFO blockmanagement.BlockManager: minReplication             = 1
31 18/06/30 18:29:13 INFO blockmanagement.BlockManager: maxReplicationStreams      = 2
32 18/06/30 18:29:13 INFO blockmanagement.BlockManager: replicationRecheckInterval = 3000
33 18/06/30 18:29:13 INFO blockmanagement.BlockManager: encryptDataTransfer        = false
34 18/06/30 18:29:13 INFO blockmanagement.BlockManager: maxNumBlocksToLog          = 1000
35 18/06/30 18:29:13 INFO namenode.FSNamesystem: fsOwner             = yun (auth:SIMPLE)
36 18/06/30 18:29:13 INFO namenode.FSNamesystem: supergroup          = supergroup
37 18/06/30 18:29:13 INFO namenode.FSNamesystem: isPermissionEnabled = true
38 18/06/30 18:29:13 INFO namenode.FSNamesystem: Determined nameservice ID: bi
39 18/06/30 18:29:13 INFO namenode.FSNamesystem: HA Enabled: true
40 18/06/30 18:29:13 INFO namenode.FSNamesystem: Append Enabled: true
41 18/06/30 18:29:13 INFO util.GSet: Computing capacity for map INodeMap
42 18/06/30 18:29:13 INFO util.GSet: VM type       = 64-bit
43 18/06/30 18:29:13 INFO util.GSet: 1.0% max memory 966.7 MB = 9.7 MB
44 18/06/30 18:29:13 INFO util.GSet: capacity      = 2^20 = 1048576 entries
45 18/06/30 18:29:13 INFO namenode.FSDirectory: ACLs enabled? false
46 18/06/30 18:29:13 INFO namenode.FSDirectory: XAttrs enabled? true
47 18/06/30 18:29:13 INFO namenode.FSDirectory: Maximum size of an xattr: 16384
48 18/06/30 18:29:13 INFO namenode.NameNode: Caching file names occuring more than 10 times
49 18/06/30 18:29:13 INFO util.GSet: Computing capacity for map cachedBlocks
50 18/06/30 18:29:13 INFO util.GSet: VM type       = 64-bit
51 18/06/30 18:29:13 INFO util.GSet: 0.25% max memory 966.7 MB = 2.4 MB
52 18/06/30 18:29:13 INFO util.GSet: capacity      = 2^18 = 262144 entries
53 18/06/30 18:29:13 INFO namenode.FSNamesystem: dfs.namenode.safemode.threshold-pct = 0.9990000128746033
54 18/06/30 18:29:13 INFO namenode.FSNamesystem: dfs.namenode.safemode.min.datanodes = 0
55 18/06/30 18:29:13 INFO namenode.FSNamesystem: dfs.namenode.safemode.extension     = 30000
56 18/06/30 18:29:13 INFO metrics.TopMetrics: NNTop conf: dfs.namenode.top.window.num.buckets = 10
57 18/06/30 18:29:13 INFO metrics.TopMetrics: NNTop conf: dfs.namenode.top.num.users = 10
58 18/06/30 18:29:13 INFO metrics.TopMetrics: NNTop conf: dfs.namenode.top.windows.minutes = 1,5,25
59 18/06/30 18:29:13 INFO namenode.FSNamesystem: Retry cache on namenode is enabled
60 18/06/30 18:29:13 INFO namenode.FSNamesystem: Retry cache will use 0.03 of total heap and retry cache entry expiry time is 600000 millis
61 18/06/30 18:29:13 INFO util.GSet: Computing capacity for map NameNodeRetryCache
62 18/06/30 18:29:13 INFO util.GSet: VM type       = 64-bit
63 18/06/30 18:29:13 INFO util.GSet: 0.029999999329447746% max memory 966.7 MB = 297.0 KB
64 18/06/30 18:29:13 INFO util.GSet: capacity      = 2^15 = 32768 entries
65 18/06/30 18:29:14 INFO namenode.FSImage: Allocated new BlockPoolId: BP-1178102935-10.0.0.111-1530354554626
66 18/06/30 18:29:14 INFO common.Storage: Storage directory /app/hadoop/tmp/dfs/name has been successfully formatted.
67 18/06/30 18:29:14 INFO namenode.FSImageFormatProtobuf: Saving image file /app/hadoop/tmp/dfs/name/current/fsimage.ckpt_0000000000000000000 using no compression
68 18/06/30 18:29:14 INFO namenode.FSImageFormatProtobuf: Image file /app/hadoop/tmp/dfs/name/current/fsimage.ckpt_0000000000000000000 of size 320 bytes saved in 0 seconds.
69 18/06/30 18:29:15 INFO namenode.NNStorageRetentionManager: Going to retain 1 images with txid >= 0
70 18/06/30 18:29:15 INFO util.ExitUtil: Exiting with status 0
71 18/06/30 18:29:15 INFO namenode.NameNode: SHUTDOWN_MSG:
72 /************************************************************
73 SHUTDOWN_MSG: Shutting down NameNode at mini01/10.0.0.111
74 ************************************************************/

拷贝到mini02

 1 #格式化后会在根据core-site.xml中的hadoop.tmp.dir配置生成个文件，这里我配置的是/app/hadoop/tmp，然后将/app/hadoop/tmp拷贝到mini02的/app/hadoop/下。
 2 # 方法1：
 3 [yun@mini01 hadoop]$ pwd
 4 /app/hadoop
 5 [yun@mini01 hadoop]$ scp -r tmp/ yun@mini02:/app/hadoop
 6 VERSION                           100%  202   189.4KB/s   00:00
 7 seen_txid                         100%    2     1.0KB/s   00:00
 8 fsimage_0000000000000000000.md5   100%   62    39.7KB/s   00:00
 9 fsimage_0000000000000000000       100%  320   156.1KB/s   00:00
10
11 ##########################3
12 # 方法2：##也可以这样，建议hdfs namenode -bootstrapStandby  # 不过需要mini02的Hadoop起来才行

8.4. 格式化ZKFC

 1 #在mini01上执行一次即可
 2 [yun@mini01 ~]$ hdfs zkfc -formatZK
 3 18/06/30 18:54:30 INFO tools.DFSZKFailoverController: Failover controller configured for NameNode NameNode at mini01/10.0.0.111:9000
 4 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:zookeeper.version=3.4.6-1569965, built on 02/20/2014 09:09 GMT
 5 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:host.name=mini01
 6 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.version=1.8.0_112
 7 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.vendor=Oracle Corporation
 8 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.home=/app/jdk1.8.0_112/jre
 9 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.class.path=……………………
10 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.library.path=/app/hadoop-2.7.6/lib/native
11 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.io.tmpdir=/tmp
12 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:java.compiler=<NA>
13 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:os.name=Linux
14 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:os.arch=amd64
15 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:os.version=3.10.0-693.el7.x86_64
16 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:user.name=yun
17 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:user.home=/app
18 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Client environment:user.dir=/app/hadoop-2.7.6
19 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Initiating client connection, connectString=mini03:2181,mini04:2181,mini05:2181,mini06:2181,mini07:2181 sessionTimeout=5000 watcher=org.apache.hadoop.ha.ActiveStandbyElector$WatcherWithClientRef@7f3b84b8
20 18/06/30 18:54:30 INFO zookeeper.ClientCnxn: Opening socket connection to server mini04/10.0.0.114:2181. Will not attempt to authenticate using SASL (unknown error)
21 18/06/30 18:54:30 INFO zookeeper.ClientCnxn: Socket connection established to mini04/10.0.0.114:2181, initiating session
22 18/06/30 18:54:30 INFO zookeeper.ClientCnxn: Session establishment complete on server mini04/10.0.0.114:2181, sessionid = 0x4644fff9cb80000, negotiated timeout = 5000
23 18/06/30 18:54:30 INFO ha.ActiveStandbyElector: Session connected.
24 18/06/30 18:54:30 INFO ha.ActiveStandbyElector: Successfully created /hadoop-ha/bi in ZK.
25 18/06/30 18:54:30 INFO zookeeper.ZooKeeper: Session: 0x4644fff9cb80000 closed
26 18/06/30 18:54:30 INFO zookeeper.ClientCnxn: EventThread shut down

8.5. 启动HDFS

 1 # 在mini01上执行
 2 [yun@mini01 ~]$ start-dfs.sh
 3 Starting namenodes on [mini01 mini02]
 4 mini01: starting namenode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-namenode-mini01.out
 5 mini02: starting namenode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-namenode-mini02.out
 6 mini07: starting datanode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-datanode-mini07.out
 7 mini06: starting datanode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-datanode-mini06.out
 8 mini05: starting datanode, logging to /app/hadoop-2.7.6/logs/hadoop-yun-datanode-mini05.out
 9 Starting journal nodes [mini05 mini06 mini07]
10 mini07: journalnode running as process 1691. Stop it first.
11 mini06: journalnode running as process 1665. Stop it first.
12 mini05: journalnode running as process 1759. Stop it first.
13 Starting ZK Failover Controllers on NN hosts [mini01 mini02]
14 mini01: starting zkfc, logging to /app/hadoop-2.7.6/logs/hadoop-yun-zkfc-mini01.out
15 mini02: starting zkfc, logging to /app/hadoop-2.7.6/logs/hadoop-yun-zkfc-mini02.out

8.6. 启动YARN

 1 #####注意#####：是在mini03上执行start-yarn.sh，把namenode和resourcemanager分开是因为性能问题
 2 # 因为他们都要占用大量资源，所以把他们分开了，他们分开了就要分别在不同的机器上启动
 3 [yun@mini03 ~]$ start-yarn.sh
 4 starting yarn daemons
 5 starting resourcemanager, logging to /app/hadoop-2.7.6/logs/yarn-yun-resourcemanager-mini03.out
 6 mini06: starting nodemanager, logging to /app/hadoop-2.7.6/logs/yarn-yun-nodemanager-mini06.out
 7 mini07: starting nodemanager, logging to /app/hadoop-2.7.6/logs/yarn-yun-nodemanager-mini07.out
 8 mini05: starting nodemanager, logging to /app/hadoop-2.7.6/logs/yarn-yun-nodemanager-mini05.out
 9
10
11 ################################
12 # 在mini04启动 resourcemanager
13 [yun@mini04 ~]$ yarn-daemon.sh start resourcemanager  # 也可用start-yarn.sh
14 starting resourcemanager, logging to /app/hadoop-2.7.6/logs/yarn-yun-resourcemanager-mini04.out

8.7. 启动说明

1 # 第一次启动的时候请严格按照上面的步骤【第一次涉及格式化问题】
2 # 第二次以及之后，步骤为： 启动zookeeper、HDFS、YARN

9. 浏览访问

9.1. Hdfs访问

9.1.1. 正常情况访问

1 http://mini01:50070    

1 http://mini02:50070    

9.1.2. mini01挂了Active自动切换

1 # mini01操作
2 [yun@mini01 ~]$ jps
3 3584 DFSZKFailoverController
4 3283 NameNode
5 5831 Jps
6 [yun@mini01 ~]$ kill 3283
7 [yun@mini01 ~]$ jps
8 3584 DFSZKFailoverController
9 5893 Jps

Namenode挂了所以mini01不能访问

1 http://mini02:50070    

可见Hadoop已经切换过去了，之后mini01即使起来了，状态也只能为standby 。

9.2. Yarn访问

1 http://mini03:8088    

1 http://mini04:8088
2 会直接跳转到http://mini03:8088/    

# 该图从其他地方截取，所以不怎么匹配

1 # Linux下访问
2 [yun@mini01 ~]$ curl mini04:8088
3 This is standby RM. The redirect url is: http://mini03:8088/

HA完毕

10. 集群运维测试

10.1. Haadmin与状态切换管理

 1 [yun@mini01 ~]$ hdfs haadmin
 2 Usage: haadmin
 3     [-transitionToActive [--forceactive] <serviceId>]
 4     [-transitionToStandby <serviceId>]
 5     [-failover [--forcefence] [--forceactive] <serviceId> <serviceId>]
 6     [-getServiceState <serviceId>]
 7     [-checkHealth <serviceId>]
 8     [-help <command>]
 9
10 Generic options supported are
11 -conf <configuration file>     specify an application configuration file
12 -D <property=value>            use value for given property
13 -fs <local|namenode:port>      specify a namenode
14 -jt <local|resourcemanager:port>    specify a ResourceManager
15 -files <comma separated list of files>    specify comma separated files to be copied to the map reduce cluster
16 -libjars <comma separated list of jars>    specify comma separated jar files to include in the classpath.
17 -archives <comma separated list of archives>    specify comma separated archives to be unarchived on the compute machines.
18
19 The general command line syntax is
20 bin/hadoop command [genericOptions] [commandOptions]

可以看到，状态操作的命令示例：

1 # 查看namenode工作状态
2 hdfs haadmin -getServiceState nn1
3
4 # 将standby状态namenode切换到active
5 hdfs haadmin -transitionToActive nn1
6
7 # 将active状态namenode切换到standby
8 hdfs haadmin -transitionToStandby nn2

10.2. 测试集群工作状态的一些指令

1 测试集群工作状态的一些指令 ：
2 hdfs dfsadmin -report     查看hdfs的各节点状态信息
3 hdfs haadmin -getServiceState nn1   # hdfs haadmin -getServiceState nn2      获取一个namenode节点的HA状态
4 hadoop-daemon.sh start namenode  单独启动一个namenode进程
5 hadoop-daemon.sh start zkfc   单独启动一个zkfc进程

10.3. Datanode动态上下线

Datanode动态上下线很简单，步骤如下：

　　a)   准备一台服务器，设置好环境

　　b)   部署hadoop的安装包，并同步集群配置

　　c)   联网上线，新datanode会自动加入集群

　　d)   如果是一次增加大批datanode，还应该做集群负载重均衡

10.4. 数据块的balance

启动balancer的命令：

1 start-balancer.sh -threshold 8

运行之后，会有Balancer进程出现：

上述命令设置了Threshold为8%，那么执行balancer命令的时候，首先统计所有DataNode的磁盘利用率的均值，然后判断如果某一个DataNode的磁盘利用率超过这个均值Threshold，那么将会把这个DataNode的block转移到磁盘利用率低的DataNode，这对于新节点的加入来说十分有用。Threshold的值为1到100之间，不显示的进行参数设置的话，默认是10。