WHAT YOU WILL NEED

REQUIRED

  • SD Card

    • We recommend an 8GB class 4 SD card – ideally preinstalled with NOOBS. You can buy a card with NOOBS pre-installed, or you can download it for free from our downloads page.
  • Display and connectivity cables
    • Any HDMI/DVI monitor or TV should work as a display for the Pi . For best results, use one with HDMI input, but other connections are available for older devices. Use a standard Ethernet cable for internet access.
  • Keyboard and mouse
    • Any standard USB keyboard and mouse will work with your Raspberry Pi.
  • Power supply
    • Use a 5V micro USB power supply to power your Raspberry Pi. Be careful that whatever power supply you use outputs at least 5V; insufficient power will cause your Pi to behave in strange ways.

NOT ESSENTIAL BUT HELPFUL TO HAVE

  • Internet connection

    • To update or download software, we recommend that you connect your Raspberry Pi to the internet either via an ethernet cable or a wifi adapter.
  • Headphones
    • Headphones or earphones with a 3.5mm jack will work with your Raspberry Pi.

PLUGGING IN YOUR RASPBERRY PI

Before you plug anything into your Raspberry Pi, make sure that you have all the equipment listed above to hand. Then follow these instructions:

  1. Begin by slotting your SD card into the SD card slot on the Raspberry Pi, which will only fit one way.
  2. Next, plug in your USB keyboard and Mouse into the USB slots on the Raspberry Pi.
  3. Make sure that your monitor or TV is turned on, and that you have selected the right input (e.g. HDMI 1, DVI, etc)
  4. Then connect your HDMI cable from your Raspberry Pi to your monitor or TV.
  5. If you intend to connect your Raspberry Pi to the internet, plug in an ethernet cable into the ethernet port next to the USB ports, otherwise skip this step.
  6. When you are happy that you have plugged in all the cables and SD card required, finally plug in the micro usb power supply. This action will turn on and boot your Raspberry Pi.
  7. If this is the first time your Raspberry Pi and NOOBS SD card have been used, then you will have to select an operating system and configure it. Follow the NOOBS guide to do this.

LOGGING INTO YOUR RASPBERRY PI

  1. Once your Raspberry Pi has completed the boot process, a login prompt will appear. The default login for Raspbian is username pi with the password raspberry. Note you will not see any writing appear when you type the password. This is a security feature in Linux.
  2. After you have successfully logged in, you will see the command line promptpi@raspberrypi~$
  3. To load the graphical user interface, type startx and press Enter on your keyboard.

How to initialize th rasp berry PI的更多相关文章

  1. Adding an On/Off switch to your Raspberry Pi

    http://www.raspberry-pi-geek.com/Archive/2013/01/Adding-an-On-Off-switch-to-your-Raspberry-Pi#articl ...

  2. 人脸识别准备 -- 基于raspberry pi 3b + movidius

    最近准备系统地学习一下深度学习和TensorFlow,就以人脸识别作为目的. 十年前我做过一些图像处理相关的项目和研究,涉及到图像检索.记得当时使用的是SIFT特征提取,该特征算子能很好地抵抗图像旋转 ...

  3. PI Square中文论坛: PI SDK 开发中级篇| PI Square

    注: 为了更好的利用站内资源营造一个更好的中文开发资源空间,本文为转发修正帖,原作者为OSIsoft技术工程师王曦(Xi Wang),原帖地址:PI SDK 中级篇 来源:https://d.gg36 ...

  4. Raspberry Pi 4B 使用OpenCV访问摄像头picamera模块

    目录 1.OpenCV安装 (1)安装依赖 (2)下载OpenCV源码 (3)安装pip (4)安装Python虚拟机 (5)编译OpenCV (6)验证安装 2.使用OpenCV和Python控制摄 ...

  5. 初识Rasp——Openrasp代码分析

    初识Rasp--Openrasp代码分析 @author:Drag0nf1y 本文首发于奇安信安全社区,现转载到个人博客. 原文链接: https://forum.butian.net/share/1 ...

  6. load和initialize方法

      一.load 方法什么时候调用: 在main方法还没执行的时候 就会 加载所有类,调用所有类的load方法. load方法是线程安全的,它使用了锁,我们应该避免线程阻塞在load方法. 在项目中使 ...

  7. Raspberry Pi(树莓派)上安装Raspbian(无路由器,无显示器)

    一. 准备工作 1. 树莓派主板 型号:树莓派3 B型 处理器:四核64位ARM Cortex-A53 CPU 内核架构:ARMv8 2. 一张大于8G的TF卡(本人用的是32G的,也作为PiLFS用 ...

  8. 让Mono 4在Raspberry Pi上飞

    最近公司有项目想要在树莓派上做,代替原来的工控机(我们是把工控主机当作小的主机用,一台小的工控主机最少也要600左右,而树莓派只要200多).于是,公司买了一个Raspberry Pi B+和一个Ra ...

  9. Kali v2.1.2 for Raspberry Pi 3B

    最新的下载地址是: https://www.offensive-security.com/kali-linux-arm-images/ 按照官网的说法是找不到树莓派版本的SHA1SUM和SHA1SUM ...

随机推荐

  1. JZOJ 5305 C先生

    题意: 有一个n个点,m条边的图,没有重边.自环,且每一条边最多属于一个环路. 给出q组询问,每次询问u,v两点间的路径有多少种可能. 思路: 先看下方样例说明: 由样例说明可以得知,路径上每经过一个 ...

  2. Google C++编程风格指南 - 中文版

    Google C++编程风格指南 - 中文版 from http://code.google.com/p/google-styleguide/ 版本: 3.133原作者: Benjy Weinberg ...

  3. 回文后缀(suffix)

    回文后缀(suffix) 题目描述 给定字符集大小 SS ,问有多少个长度为 NN 的字符串不存在长度 >1>1 的回文后缀. 答案对 MM 取模. 输入格式 第一行两个正整数 n, kn ...

  4. Command Pattern的简单介绍

    Command pattern 的角色有:Command(抽象命令).ConcreteCommand(具体命令) .Invoker(传达命令者) .receiver(接收命令者)Client(客户类, ...

  5. WCF信道绑定代码

    监听端创建信道Listener,代码 using System; using System.Collections.Generic; using System.Linq; using System.T ...

  6. IOS VLC编译步骤(包含移植和截图功能)

    http://blog.csdn.net/Kan_Crystal/article/details/40424673 一.下载源码 先到VLC官网将源码下载到本机,以下链接为官网编译操作地址:https ...

  7. source insight setting

    adjust source code font size Options -> File Type Options -> Screen Font -> Size adjust dis ...

  8. HTML添加上传图片并进行预览

    使用说明:新建文件,直接复制粘贴,保存文件为html 格式,在浏览器运行即可: 第一种: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Tr ...

  9. Selenium2+python自动化30-引入unittest框架【转载】

    本篇转自博客:上海-悠悠 原文地址:http://www.cnblogs.com/yoyoketang/tag/unittest/ from selenium import webdriverfrom ...

  10. C# web server的开发流程

    http://blog.csdn.net/h0322/article/details/4776819