/*

   This file contains definitions used by the Hex-Rays decompiler output.
It has type definitions and convenience macros to make the
output more readable. Copyright (c) 2007-2011 Hex-Rays */ #if defined(__GNUC__)
typedef long long ll;
typedef unsigned long long ull;
#define __int64 long long
#define __int32 int
#define __int16 short
#define __int8 char
#define MAKELL(num) num ## LL
#define FMT_64 "ll"
#elif defined(_MSC_VER)
typedef __int64 ll;
typedef unsigned __int64 ull;
#define MAKELL(num) num ## i64
#define FMT_64 "I64"
#elif defined (__BORLANDC__)
typedef __int64 ll;
typedef unsigned __int64 ull;
#define MAKELL(num) num ## i64
#define FMT_64 "L"
#else
#error "unknown compiler"
#endif
typedef unsigned int uint;
typedef unsigned char uchar;
typedef unsigned short ushort;
typedef unsigned long ulong; typedef char int8;
typedef signed char sint8;
typedef unsigned char uint8;
typedef short int16;
typedef signed short sint16;
typedef unsigned short uint16;
typedef int int32;
typedef signed int sint32;
typedef unsigned int uint32;
typedef ll int64;
typedef ll sint64;
typedef ull uint64; // Partially defined types:
#define _BYTE uint8
#define _WORD uint16
#define _DWORD uint32
#define _QWORD uint64
#if !defined(_MSC_VER)
#define _LONGLONG __int128
#endif #ifndef _WINDOWS_
typedef int8 BYTE;
typedef int16 WORD;
typedef int32 DWORD;
typedef int32 LONG;
#endif
typedef int64 QWORD;
#ifndef __cplusplus
typedef int bool; // we want to use bool in our C programs
#endif // Some convenience macros to make partial accesses nicer
// first unsigned macros:
#define LOBYTE(x) (*((_BYTE*)&(x))) // low byte
#define LOWORD(x) (*((_WORD*)&(x))) // low word
#define LODWORD(x) (*((_DWORD*)&(x))) // low dword
#define HIBYTE(x) (*((_BYTE*)&(x)+1))
#define HIWORD(x) (*((_WORD*)&(x)+1))
#define HIDWORD(x) (*((_DWORD*)&(x)+1))
#define BYTEn(x, n) (*((_BYTE*)&(x)+n))
#define WORDn(x, n) (*((_WORD*)&(x)+n))
#define BYTE1(x) BYTEn(x, 1) // byte 1 (counting from 0)
#define BYTE2(x) BYTEn(x, 2)
#define BYTE3(x) BYTEn(x, 3)
#define BYTE4(x) BYTEn(x, 4)
#define BYTE5(x) BYTEn(x, 5)
#define BYTE6(x) BYTEn(x, 6)
#define BYTE7(x) BYTEn(x, 7)
#define BYTE8(x) BYTEn(x, 8)
#define BYTE9(x) BYTEn(x, 9)
#define BYTE10(x) BYTEn(x, 10)
#define BYTE11(x) BYTEn(x, 11)
#define BYTE12(x) BYTEn(x, 12)
#define BYTE13(x) BYTEn(x, 13)
#define BYTE14(x) BYTEn(x, 14)
#define BYTE15(x) BYTEn(x, 15)
#define WORD1(x) WORDn(x, 1)
#define WORD2(x) WORDn(x, 2) // third word of the object, unsigned
#define WORD3(x) WORDn(x, 3)
#define WORD4(x) WORDn(x, 4)
#define WORD5(x) WORDn(x, 5)
#define WORD6(x) WORDn(x, 6)
#define WORD7(x) WORDn(x, 7) // now signed macros (the same but with sign extension)
#define SLOBYTE(x) (*((int8*)&(x)))
#define SLOWORD(x) (*((int16*)&(x)))
#define SLODWORD(x) (*((int32*)&(x)))
#define SHIBYTE(x) (*((int8*)&(x)+1))
#define SHIWORD(x) (*((int16*)&(x)+1))
#define SHIDWORD(x) (*((int32*)&(x)+1))
#define SBYTEn(x, n) (*((int8*)&(x)+n))
#define SWORDn(x, n) (*((int16*)&(x)+n))
#define SBYTE1(x) SBYTEn(x, 1)
#define SBYTE2(x) SBYTEn(x, 2)
#define SBYTE3(x) SBYTEn(x, 3)
#define SBYTE4(x) SBYTEn(x, 4)
#define SBYTE5(x) SBYTEn(x, 5)
#define SBYTE6(x) SBYTEn(x, 6)
#define SBYTE7(x) SBYTEn(x, 7)
#define SBYTE8(x) SBYTEn(x, 8)
#define SBYTE9(x) SBYTEn(x, 9)
#define SBYTE10(x) SBYTEn(x, 10)
#define SBYTE11(x) SBYTEn(x, 11)
#define SBYTE12(x) SBYTEn(x, 12)
#define SBYTE13(x) SBYTEn(x, 13)
#define SBYTE14(x) SBYTEn(x, 14)
#define SBYTE15(x) SBYTEn(x, 15)
#define SWORD1(x) SWORDn(x, 1)
#define SWORD2(x) SWORDn(x, 2)
#define SWORD3(x) SWORDn(x, 3)
#define SWORD4(x) SWORDn(x, 4)
#define SWORD5(x) SWORDn(x, 5)
#define SWORD6(x) SWORDn(x, 6)
#define SWORD7(x) SWORDn(x, 7) // Helper functions to represent some assembly instructions. #ifdef __cplusplus // Fill memory block with an integer value
inline void memset32(void *ptr, uint32 value, int count)
{
uint32 *p = (uint32 *)ptr;
for ( int i=; i < count; i++ )
*p++ = value;
} // Generate a reference to pair of operands
template<class T> int16 __PAIR__( int8 high, T low) { return ((( int16)high) << sizeof(high)*) | uint8(low); }
template<class T> int32 __PAIR__( int16 high, T low) { return ((( int32)high) << sizeof(high)*) | uint16(low); }
template<class T> int64 __PAIR__( int32 high, T low) { return ((( int64)high) << sizeof(high)*) | uint32(low); }
template<class T> uint16 __PAIR__(uint8 high, T low) { return (((uint16)high) << sizeof(high)*) | uint8(low); }
template<class T> uint32 __PAIR__(uint16 high, T low) { return (((uint32)high) << sizeof(high)*) | uint16(low); }
template<class T> uint64 __PAIR__(uint32 high, T low) { return (((uint64)high) << sizeof(high)*) | uint32(low); } // rotate left
template<class T> T __ROL__(T value, uint count)
{
const uint nbits = sizeof(T) * ;
count %= nbits; T high = value >> (nbits - count);
value <<= count;
value |= high;
return value;
} // rotate right
template<class T> T __ROR__(T value, uint count)
{
const uint nbits = sizeof(T) * ;
count %= nbits; T low = value << (nbits - count);
value >>= count;
value |= low;
return value;
} // carry flag of left shift
template<class T> int8 __MKCSHL__(T value, uint count)
{
const uint nbits = sizeof(T) * ;
count %= nbits; return (value >> (nbits-count)) & ;
} // carry flag of right shift
template<class T> int8 __MKCSHR__(T value, uint count)
{
return (value >> (count-)) & ;
} // sign flag
template<class T> int8 __SETS__(T x)
{
if ( sizeof(T) == )
return int8(x) < ;
if ( sizeof(T) == )
return int16(x) < ;
if ( sizeof(T) == )
return int32(x) < ;
return int64(x) < ;
} // overflow flag of subtraction (x-y)
template<class T, class U> int8 __OFSUB__(T x, U y)
{
if ( sizeof(T) < sizeof(U) )
{
U x2 = x;
int8 sx = __SETS__(x2);
return (sx ^ __SETS__(y)) & (sx ^ __SETS__(x2-y));
}
else
{
T y2 = y;
int8 sx = __SETS__(x);
return (sx ^ __SETS__(y2)) & (sx ^ __SETS__(x-y2));
}
} // overflow flag of addition (x+y)
template<class T, class U> int8 __OFADD__(T x, U y)
{
if ( sizeof(T) < sizeof(U) )
{
U x2 = x;
int8 sx = __SETS__(x2);
return (( ^ sx) ^ __SETS__(y)) & (sx ^ __SETS__(x2+y));
}
else
{
T y2 = y;
int8 sx = __SETS__(x);
return (( ^ sx) ^ __SETS__(y2)) & (sx ^ __SETS__(x+y2));
}
} // carry flag of subtraction (x-y)
template<class T, class U> int8 __CFSUB__(T x, U y)
{
int size = sizeof(T) > sizeof(U) ? sizeof(T) : sizeof(U);
if ( size == )
return uint8(x) < uint8(y);
if ( size == )
return uint16(x) < uint16(y);
if ( size == )
return uint32(x) < uint32(y);
return uint64(x) < uint64(y);
} // carry flag of addition (x+y)
template<class T, class U> int8 __CFADD__(T x, U y)
{
int size = sizeof(T) > sizeof(U) ? sizeof(T) : sizeof(U);
if ( size == )
return uint8(x) > uint8(x+y);
if ( size == )
return uint16(x) > uint16(x+y);
if ( size == )
return uint32(x) > uint32(x+y);
return uint64(x) > uint64(x+y);
} #else
// The following definition is not quite correct because it always returns
// uint64. The above C++ functions are good, though.
#define __PAIR__(high, low) (((uint64)(high)<<sizeof(high)*8) | low)
// For C, we just provide macros, they are not quite correct.
#define __ROL__(x, y) __rotl__(x, y) // Rotate left
#define __ROR__(x, y) __rotr__(x, y) // Rotate right
#define __CFSHL__(x, y) invalid_operation // Generate carry flag for (x<<y)
#define __CFSHR__(x, y) invalid_operation // Generate carry flag for (x>>y)
#define __CFADD__(x, y) invalid_operation // Generate carry flag for (x+y)
#define __CFSUB__(x, y) invalid_operation // Generate carry flag for (x-y)
#define __OFADD__(x, y) invalid_operation // Generate overflow flag for (x+y)
#define __OFSUB__(x, y) invalid_operation // Generate overflow flag for (x-y)
#endif // No definition for rcl/rcr because the carry flag is unknown
#define __RCL__(x, y) invalid_operation // Rotate left thru carry
#define __RCR__(x, y) invalid_operation // Rotate right thru carry
#define __MKCRCL__(x, y) invalid_operation // Generate carry flag for a RCL
#define __MKCRCR__(x, y) invalid_operation // Generate carry flag for a RCR
#define __SETP__(x, y) invalid_operation // Generate parity flag for (x-y) // In the decompilation listing there are some objects declarared as _UNKNOWN
// because we could not determine their types. Since the C compiler does not
// accept void item declarations, we replace them by anything of our choice,
// for example a char: #define _UNKNOWN char #ifdef _MSC_VER
#define snprintf _snprintf
#define vsnprintf _vsnprintf
#endif

IDA Pro plug-in defines的更多相关文章

  1. 安卓动态调试七种武器之孔雀翎 – Ida Pro

    安卓动态调试七种武器之孔雀翎 – Ida Pro 作者:蒸米@阿里聚安全 0x00 序 随着移动安全越来越火,各种调试工具也都层出不穷,但因为环境和需求的不同,并没有工具是万能的.另外工具是死的,人是 ...

  2. 计算机病毒实践汇总六:IDA Pro基础

    在尝试学习分析的过程中,判断结论不一定准确,只是一些我自己的思考和探索.敬请批评指正! 1. IDA使用 (1)搜索.下载并执行IDA Pro,对可执行程序lab05-01.dll进行装载,分别以图形 ...

  3. Ubuntu下安装IDA pro

    预备 由于IDA pro只能装在32位环境下,如果是64位Ubuntu,需要运行如下命令安装32位的必备库. sudo dpkg --add-architecture i386 sudo apt-ge ...

  4. How to create an anonymous IDA PRO database (.IDB)

    Source: http://www.0xebfe.net/blog/2013/01/13/how-to-create-an-anonymous-ida-pro-database-dot-idb/ P ...

  5. android调试系列--使用ida pro调试so

    1.工具介绍 IDA pro: 反汇编神器,可静态分析和动态调试. 模拟机或者真机:运行要调试的程序. 样本:阿里安全挑战赛第二题:http://pan.baidu.com/s/1eS9EXIM 2. ...

  6. android调试系列--使用ida pro调试原生程序

    1.工具介绍 IDA pro: 反汇编神器,可静态分析和动态调试. 模拟机或者真机:运行要调试的程序. 样本:自己编写NDK demo程序进行调试 2.前期准备 2.1  准备样本程序(假设已经配置好 ...

  7. [转]How to create an anonymous IDA PRO database (.IDB)

    Source: http://www.0xebfe.net/blog/2013/01/13/how-to-create-an-anonymous-ida-pro-database-dot-idb/ P ...

  8. IDA Pro使用技巧

    DA Pro基本简介 IDA加载完程序后,3个立即可见的窗口分别为IDA-View,Named,和消息输出窗口(output Window). IDA图形视图会有执行流,Yes箭头默认为绿色,No箭头 ...

  9. IDA Pro使用(静态分析+动态调试)

    链接:http://skysider.com/?p=458 IDA Pro使用(静态分析+动态调试) 1.静态分析 IDA FLIRT Signature Database —— 用于识别静态编译的可 ...

  10. IDA Pro Disassembler 6.8.15.413 (Windows, Linux, Mac)

    IDA: What's new in 6.8 Highlights This is mainly a maintenance release, so our focus was on fixing b ...

随机推荐

  1. 【bzoj5050】【bzoj九月月赛H】建造摩天楼

    讲个笑话,这个题很休闲的. 大概是这样的,昨天看到这个题,第一眼星际把题目看反了然后感觉这是个傻逼题. 后来发现不对,这个修改一次的影响是很多的,可能导致一个数突然可以被改,也可能导致一个数不能被改. ...

  2. DAG blockchain (byteball)

    转载参考自: https://www.jinse.com/bitcoin/116184.html https://www.jinse.com/blockchain/116175.html https: ...

  3. 设计模式之笔记--解释器模式(Interpreter)

    解释器模式(Interpreter) 定义 解释器模式(Interpreter),给定一个语言,定义它的文法的一种表示,并定义一个解释器,这个解释器使用该表示来解释语言中的句子. 类图 描述 Expr ...

  4. 「pycaffe指南」使用caffe的NetSpec.py中的Python接口自动生成×.prototxt文件

    https://www.jianshu.com/p/1a420445deea 作者:MapReducer 链接:https://www.jianshu.com/p/1a420445deea 來源:简书 ...

  5. Loadrunner下WebTours系统自带的用户名和密码

    打开:http://127.0.0.1:1080/WebTours/ 系统默认自带两个用户名和密码,位于~\WebTours\MercuryWebTours\users: 1.用户名:joe,密码:y ...

  6. Java Tuple使用实例(转)

    转自链接:http://www.cnblogs.com/davidwang456/p/4514659.html 一.为什么使用元组tuple? 元组和列表list一样,都可能用于数据存储,包含多个数据 ...

  7. python之pandas&&DataFrame

    1.Series  Series是一个一维数组 pandas会默认从0开始作为Series的index >>> test = pd.Series(['num0','num1','nu ...

  8. python爬取网易云音乐歌单音乐

    在网易云音乐中第一页歌单的url:http://music.163.com/#/discover/playlist/ 依次第二页:http://music.163.com/#/discover/pla ...

  9. react + redux 实现幻灯片

    写在前面: 这一篇是我 使用scss + react + webpack + es6实现幻灯片 的进阶篇,效果请点我,将会使用上redux的基础用法,因为一开始没有理解好redux的用法,单纯看文档, ...

  10. 11.Spark Streaming源码解读之Driver中的ReceiverTracker架构设计以及具体实现彻底研究

    上篇文章详细解析了Receiver不断接收数据的过程,在Receiver接收数据的过程中会将数据的元信息发送给ReceiverTracker:   本文将详细解析ReceiverTracker的的架构 ...