PHP 在WIN10 下配置

apache: https://www.apachehaus.com/

php: https://windows.php.net/

https://windows.php.net/

集成安装配置版：https://www.apachefriends.org/index.html

手动安装配置：httpd.conf(apache) 和php.ini (php)文件

D:\Apache24\conf：

httpd.conf

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/access_log"

# with ServerRoot set to "/usr/local/apache2" will be interpreted by the

# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"

# will be interpreted as '/logs/access_log'.

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which httpd.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used.  If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

# 所在位置

#

Define SRVROOT "D:/Apache24"

ServerRoot "${SRVROOT}"

#

# Mutex: Allows you to set the mutex mechanism and mutex file directory

# for individual mutexes, or change the global defaults

#

# Uncomment and change the directory if mutexes are file-based and the default

# mutex file directory is not on a local disk or is not appropriate for some

# other reason.

#

# Mutex default:logs

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

# # 改端口，80 被占用

#Listen 12.34.56.78:80

#

Listen 8088

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

#LoadModule access_compat_module modules/mod_access_compat.so

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule allowmethods_module modules/mod_allowmethods.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule auth_form_module modules/mod_auth_form.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

LoadModule authn_core_module modules/mod_authn_core.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authn_socache_module modules/mod_authn_socache.so

#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

LoadModule authz_core_module modules/mod_authz_core.so

#LoadModule authz_dbd_module modules/mod_authz_dbd.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule buffer_module modules/mod_buffer.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule cache_disk_module modules/mod_cache_disk.so

#LoadModule cache_socache_module modules/mod_cache_socache.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

#LoadModule data_module modules/mod_data.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

#LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule dumpio_module modules/mod_dumpio.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

#LoadModule headers_module modules/mod_headers.so

#LoadModule heartbeat_module modules/mod_heartbeat.so

#LoadModule heartmonitor_module modules/mod_heartmonitor.so

#LoadModule http2_module modules/mod_http2.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_debug_module modules/mod_log_debug.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule lua_module modules/mod_lua.so

#LoadModule macro_module modules/mod_macro.so

#LoadModule md_module modules/mod_md.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

#LoadModule proxy_module modules/mod_proxy.so

#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_express_module modules/mod_proxy_express.so

#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

#LoadModule proxy_html_module modules/mod_proxy_html.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule proxy_http2_module modules/mod_proxy_http2.so

#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so

#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

#LoadModule ratelimit_module modules/mod_ratelimit.so

#LoadModule reflector_module modules/mod_reflector.so

#LoadModule remoteip_module modules/mod_remoteip.so

#LoadModule request_module modules/mod_request.so

#LoadModule reqtimeout_module modules/mod_reqtimeout.so

#LoadModule rewrite_module modules/mod_rewrite.so

#LoadModule sed_module modules/mod_sed.so

#LoadModule session_module modules/mod_session.so

#LoadModule session_cookie_module modules/mod_session_cookie.so

#LoadModule session_crypto_module modules/mod_session_crypto.so

#LoadModule session_dbd_module modules/mod_session_dbd.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so

#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

#LoadModule socache_dbm_module modules/mod_socache_dbm.so

#LoadModule socache_memcache_module modules/mod_socache_memcache.so

LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

#LoadModule speling_module modules/mod_speling.so

LoadModule ssl_module modules/mod_ssl.so

LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule version_module modules/mod_version.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule watchdog_module modules/mod_watchdog.so

#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin geovindu@163.com

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

# netstat -aon|findstr "8080"改端口 80被IIS占用 可用 netstat -aon|findstr "80"查询

#

ServerName localhost:8088

#

# Deny access to the entirety of your server's filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

#

<Directory />

    AllowOverride none

    Require all denied

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

# 默认的文档下也可以根据自己的需要改所文的网页程序文件夹

#

DocumentRoot "${SRVROOT}/htdocs"

<Directory "${SRVROOT}/htdocs">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.4/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride None

    #

    # Controls who can get stuff from this server.

    #

    Require all granted

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.php

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<Files ".ht*">

    Require all denied

</Files>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    CustomLog "logs/access.log" common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog "logs/access.log" combined

</IfModule>

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/"

</IfModule>

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock logs/cgisock

</IfModule>

#

# "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "${SRVROOT}/cgi-bin">

    AllowOverride None

    Options None

    Require all granted

</Directory>

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig conf/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    #AddHandler cgi-script .cgi .pl

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    #AddType text/html .shtml

    #AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or one of the special

# values 'default', 'none' or 'unlimited'.

# Default setting is to accept 200 Ranges.

#MaxRanges unlimited

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults: EnableMMAP On, EnableSendfile Off

#

#EnableMMAP off

#EnableSendfile on

#AcceptFilter http none

#AcceptFilter https none

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

#Include conf/extra/httpd-mpm.conf

# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

Include conf/extra/httpd-autoindex.conf

# Language settings

#Include conf/extra/httpd-languages.conf

# User home directories

#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

Include conf/extra/httpd-info.conf

# Virtual hosts

# Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1

<IfModule proxy_html_module>

Include conf/extra/httpd-proxy-html.conf

</IfModule>

# Secure (SSL/TLS) connections

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

#Include conf/extra/httpd-ssl.conf

Include conf/extra/httpd-ahssl.conf

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

<IfModule http2_module>

    ProtocolsHonorOrder On

    Protocols h2 h2c http/1.1

</IfModule>

#

# php7 support

LoadModule php7_module "D:/phpx64/php7apache2_4.dll"

AddHandler application/x-httpd-php .php

#

# configure the path to php.ini

PHPIniDir "D:/phpx64/"

　php.ini:

[PHP]

;;;;;;;;;;;;;;;;;;;

; About php.ini   ;

;;;;;;;;;;;;;;;;;;;

; PHP's initialization file, generally called php.ini, is responsible for

; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of locations.

; The following is a summary of its search order:

; 1. SAPI module specific location.

; 2. The PHPRC environment variable. (As of PHP 5.2.0)

; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)

; 4. Current working directory (except CLI)

; 5. The web server's directory (for SAPI modules), or directory of PHP

; (otherwise in Windows)

; 6. The directory from the --with-config-file-path compile time option, or the

; Windows directory (C:\windows or C:\winnt)

; See the PHP docs for more specific information.

; http://php.net/configuration.file

; The syntax of the file is extremely simple.  Whitespace and lines

; beginning with a semicolon are silently ignored (as you probably guessed).

; Section headers (e.g. [Foo]) are also silently ignored, even though

; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only

; apply to PHP files in the /www/mysite directory.  Directives

; following the section heading [HOST=www.example.com] only apply to

; PHP files served from www.example.com.  Directives set in these

; special sections cannot be overridden by user-defined INI files or

; at runtime. Currently, [PATH=] and [HOST=] sections only work under

; CGI/FastCGI.

; http://php.net/ini.sections

; Directives are specified using the following syntax:

; directive = value

; Directive names are *case sensitive* - foo=bar is different from FOO=bar.

; Directives are variables used to configure PHP or PHP extensions.

; There is no name validation.  If PHP can't find an expected

; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one

; of the INI constants (On, Off, True, False, Yes, No and None) or an expression

; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a

; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:

; |  bitwise OR

; ^  bitwise XOR

; &  bitwise AND

; ~  bitwise NOT

; !  boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.

; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal

; sign, or by using the None keyword:

;  foo =         ; sets foo to an empty string

;  foo = None    ; sets foo to an empty string

;  foo = "None"  ; sets foo to the string 'None'

; If you use constants in your value, and these constants belong to a

; dynamically loaded extension (either a PHP extension or a Zend extension),

; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;

; About this file ;

;;;;;;;;;;;;;;;;;;;

; PHP comes packaged with two INI files. One that is recommended to be used

; in production environments and one that is recommended to be used in

; development environments.

; php.ini-production contains settings which hold security, performance and

; best practices at its core. But please be aware, these settings may break

; compatibility with older or less security conscience applications. We

; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it is

; much more verbose when it comes to errors. We recommend using the

; development version only in development environments, as errors shown to

; application users can inadvertently leak otherwise secure information.

; This is php.ini-production INI file.

;;;;;;;;;;;;;;;;;;;

; Quick Reference ;

;;;;;;;;;;;;;;;;;;;

; The following are all the settings which are different in either the production

; or development versions of the INIs with respect to PHP's default behavior.

; Please see the actual settings later in the document for more details as to why

; we recommend these changes in PHP's behavior.

; display_errors

;   Default Value: On

;   Development Value: On

;   Production Value: Off

; display_startup_errors

;   Default Value: Off

;   Development Value: On

;   Production Value: Off

; error_reporting

;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED

;   Development Value: E_ALL

;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; html_errors

;   Default Value: On

;   Development Value: On

;   Production value: On

; log_errors

;   Default Value: Off

;   Development Value: On

;   Production Value: On

; max_input_time

;   Default Value: -1 (Unlimited)

;   Development Value: 60 (60 seconds)

;   Production Value: 60 (60 seconds)

; output_buffering

;   Default Value: Off

;   Development Value: 4096

;   Production Value: 4096

; register_argc_argv

;   Default Value: On

;   Development Value: Off

;   Production Value: Off

; request_order

;   Default Value: None

;   Development Value: "GP"

;   Production Value: "GP"

; session.gc_divisor

;   Default Value: 100

;   Development Value: 1000

;   Production Value: 1000

; session.sid_bits_per_character

;   Default Value: 4

;   Development Value: 5

;   Production Value: 5

; short_open_tag

;   Default Value: On

;   Development Value: Off

;   Production Value: Off

; track_errors

;   Default Value: Off

;   Development Value: On

;   Production Value: Off

; variables_order

;   Default Value: "EGPCS"

;   Development Value: "GPCS"

;   Production Value: "GPCS"

;;;;;;;;;;;;;;;;;;;;

; php.ini Options  ;

;;;;;;;;;;;;;;;;;;;;

; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"

;user_ini.filename = ".user.ini"

; To disable this feature set this option to empty value

;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)

;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;

; Language Options ;

;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.

; http://php.net/engine

engine = On

; This directive determines whether or not PHP will recognize code between

; <? and ?> tags as PHP source which should be processed as such. It is

; generally recommended that <?php and ?> should be used and that this feature

; should be disabled, as enabling it may result in issues when generating XML

; documents, however this remains supported for backward compatibility reasons.

; Note that this directive does not control the <?= shorthand tag, which can be

; used regardless of this directive.

; Default Value: On

; Development Value: Off

; Production Value: Off

; http://php.net/short-open-tag

short_open_tag = Off

; The number of significant digits displayed in floating point numbers.

; http://php.net/precision

precision = 14

; Output buffering is a mechanism for controlling how much output data

; (excluding headers and cookies) PHP should keep internally before pushing that

; data to the client. If your application's output exceeds this setting, PHP

; will send that data in chunks of roughly the size you specify.

; Turning on this setting and managing its maximum buffer size can yield some

; interesting side-effects depending on your application and web server.

; You may be able to send headers and cookies after you've already sent output

; through print or echo. You also may see performance benefits if your server is

; emitting less packets due to buffered output versus PHP streaming the output

; as it gets it. On production servers, 4096 bytes is a good setting for performance

; reasons.

; Note: Output buffering can also be controlled via Output Buffering Control

;   functions.

; Possible Values:

;   On = Enabled and buffer is unlimited. (Use with caution)

;   Off = Disabled

;   Integer = Enables the buffer and sets its maximum size in bytes.

; Note: This directive is hardcoded to Off for the CLI SAPI

; Default Value: Off

; Development Value: 4096

; Production Value: 4096

; http://php.net/output-buffering

output_buffering = 4096

; You can redirect all of the output of your scripts to a function.  For

; example, if you set output_handler to "mb_output_handler", character

; encoding will be transparently converted to the specified encoding.

; Setting any output handler automatically turns on output buffering.

; Note: People who wrote portable scripts should not depend on this ini

;   directive. Instead, explicitly set the output handler using ob_start().

;   Using this ini directive may cause problems unless you know what script

;   is doing.

; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"

;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".

; Note: output_handler must be empty if this is set 'On' !!!!

;   Instead you must use zlib.output_handler.

; http://php.net/output-handler

;output_handler =

; URL rewriter function rewrites URL on the fly by using

; output buffer. You can set target tags by this configuration.

; "form" tag is special tag. It will add hidden input tag to pass values.

; Refer to session.trans_sid_tags for usage.

; Default Value: "form="

; Development Value: "form="

; Production Value: "form="

;url_rewriter.tags

; URL rewriter will not rewrites absolute URL nor form by default. To enable

; absolute URL rewrite, allowed hosts must be defined at RUNTIME.

; Refer to session.trans_sid_hosts for more details.

; Default Value: ""

; Development Value: ""

; Production Value: ""

;url_rewriter.hosts

; Transparent output compression using the zlib library

; Valid values for this option are 'off', 'on', or a specific buffer size

; to be used for compression (default is 4KB)

; Note: Resulting chunk size may vary due to nature of compression. PHP

;   outputs chunks that are few hundreds bytes each as a result of

;   compression. If you prefer a larger chunk size for better

;   performance, enable output_buffering in addition.

; Note: You need to use zlib.output_handler instead of the standard

;   output_handler, or otherwise the output will be corrupted.

; http://php.net/zlib.output-compression

zlib.output_compression = Off

; http://php.net/zlib.output-compression-level

;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression

; is activated here. This setting does the same as output_handler but in

; a different order.

; http://php.net/zlib.output-handler

;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself

; automatically after every output block.  This is equivalent to calling the

; PHP function flush() after each and every call to print() or echo() and each

; and every HTML block.  Turning this option on has serious performance

; implications and is generally recommended for debugging purposes only.

; http://php.net/implicit-flush

; Note: This directive is hardcoded to On for the CLI SAPI

implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'

; name as parameter), if the unserializer finds an undefined class

; which should be instantiated. A warning appears if the specified function is

; not defined, or if the function doesn't include/implement the missing class.

; So only set this entry, if you really want to implement such a

; callback-function.

unserialize_callback_func =

; When floats & doubles are serialized, store serialize_precision significant

; digits after the floating point. The default value ensures that when floats

; are decoded with unserialize, the data will remain the same.

; The value is also used for json_encode when encoding double values.

; If -1 is used, then dtoa mode 0 is used which automatically select the best

; precision.

serialize_precision = -1

; open_basedir, if set, limits all file operations to the defined directory

; and below.  This directive makes most sense if used in a per-directory

; or per-virtualhost web server configuration file.

; http://php.net/open-basedir

;open_basedir =

; This directive allows you to disable certain functions for security reasons.

; It receives a comma-delimited list of function names.

; http://php.net/disable-functions

disable_functions =

; This directive allows you to disable certain classes for security reasons.

; It receives a comma-delimited list of class names.

; http://php.net/disable-classes

disable_classes =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in

; <span style="color: ???????"> would work.

; http://php.net/syntax-highlighting

;highlight.string  = #DD0000

;highlight.comment = #FF9900

;highlight.keyword = #007700

;highlight.default = #0000BB

;highlight.html    = #000000

; If enabled, the request will be allowed to complete even if the user aborts

; the request. Consider enabling it if executing long requests, which may end up

; being interrupted by the user or a browser timing out. PHP's default behavior

; is to disable this feature.

; http://php.net/ignore-user-abort

;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should

; be increased on systems where PHP opens many files to reflect the quantity of

; the file operations performed.

; http://php.net/realpath-cache-size

;realpath_cache_size = 4096k

; Duration of time, in seconds for which to cache realpath information for a given

; file or directory. For systems with rarely changing files, consider increasing this

; value.

; http://php.net/realpath-cache-ttl

;realpath_cache_ttl = 120

; Enables or disables the circular reference collector.

; http://php.net/zend.enable-gc

zend.enable_gc = On

; If enabled, scripts may be written in encodings that are incompatible with

; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such

; encodings.  To use this feature, mbstring extension must be enabled.

; Default: Off

;zend.multibyte = Off

; Allows to set the default encoding for the scripts.  This value will be used

; unless "declare(encoding=...)" directive appears at the top of the script.

; Only affects if zend.multibyte is set.

; Default: ""

;zend.script_encoding =

;;;;;;;;;;;;;;;;;

; Miscellaneous ;

;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server

; (e.g. by adding its signature to the Web server header).  It is no security

; threat in any way, but it makes it possible to determine whether you use PHP

; on your server or not.

; http://php.net/expose-php

expose_php = On

;;;;;;;;;;;;;;;;;;;

; Resource Limits ;

;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds

; http://php.net/max-execution-time

; Note: This directive is hardcoded to 0 for the CLI SAPI

max_execution_time = 30

; Maximum amount of time each script may spend parsing request data. It's a good

; idea to limit this time on productions servers in order to eliminate unexpectedly

; long running scripts.

; Note: This directive is hardcoded to -1 for the CLI SAPI

; Default Value: -1 (Unlimited)

; Development Value: 60 (60 seconds)

; Production Value: 60 (60 seconds)

; http://php.net/max-input-time

max_input_time = 60

; Maximum input variable nesting level

; http://php.net/max-input-nesting-level

;max_input_nesting_level = 64

; How many GET/POST/COOKIE input variables may be accepted

; max_input_vars = 1000

; Maximum amount of memory a script may consume (128MB)

; http://php.net/memory-limit

memory_limit = 128M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Error handling and logging ;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like

; it to take action for. The recommended way of setting values for this

; directive is through the use of the error level constants and bitwise

; operators. The error level constants are below here for convenience as well as

; some common settings and their meanings.

; By default, PHP is set to take action on all errors, notices and warnings EXCEPT

; those related to E_NOTICE and E_STRICT, which together cover best practices and

; recommended coding standards in PHP. For performance reasons, this is the

; recommend error reporting setting. Your production server shouldn't be wasting

; resources complaining about best practices and coding standards. That's what

; development servers and development settings are for.

; Note: The php.ini-development file has this setting as E_ALL. This

; means it pretty much reports everything which is exactly what you want during

; development and early testing.

;

; Error Level Constants:

; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 5.4.0)

; E_ERROR           - fatal run-time errors

; E_RECOVERABLE_ERROR  - almost fatal run-time errors

; E_WARNING         - run-time warnings (non-fatal errors)

; E_PARSE           - compile-time parse errors

; E_NOTICE          - run-time notices (these are warnings which often result

;                     from a bug in your code, but it's possible that it was

;                     intentional (e.g., using an uninitialized variable and

;                     relying on the fact it is automatically initialized to an

;                     empty string)

; E_STRICT          - run-time notices, enable to have PHP suggest changes

;                     to your code which will ensure the best interoperability

;                     and forward compatibility of your code

; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup

; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's

;                     initial startup

; E_COMPILE_ERROR   - fatal compile-time errors

; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)

; E_USER_ERROR      - user-generated error message

; E_USER_WARNING    - user-generated warning message

; E_USER_NOTICE     - user-generated notice message

; E_DEPRECATED      - warn about code that will not work in future versions

;                     of PHP

; E_USER_DEPRECATED - user-generated deprecation warnings

;

; Common Values:

;   E_ALL (Show all errors, warnings and notices including coding standards.)

;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)

;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)

;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)

; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED

; Development Value: E_ALL

; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; http://php.net/error-reporting

error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT

; This directive controls whether or not and where PHP will output errors,

; notices and warnings too. Error output is very useful during development, but

; it could be very dangerous in production environments. Depending on the code

; which is triggering the error, sensitive information could potentially leak

; out of your application such as database usernames and passwords or worse.

; For production environments, we recommend logging errors rather than

; sending them to STDOUT.

; Possible Values:

;   Off = Do not display any errors

;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)

;   On or stdout = Display errors to STDOUT

; Default Value: On

; Development Value: On

; Production Value: Off

; http://php.net/display-errors

display_errors = Off

; The display of errors which occur during PHP's startup sequence are handled

; separately from display_errors. PHP's default behavior is to suppress those

; errors from clients. Turning the display of startup errors on can be useful in

; debugging configuration problems. We strongly recommend you

; set this to 'off' for production servers.

; Default Value: Off

; Development Value: On

; Production Value: Off

; http://php.net/display-startup-errors

display_startup_errors = Off

; Besides displaying errors, PHP can also log errors to locations such as a

; server-specific log, STDERR, or a location specified by the error_log

; directive found below. While errors should not be displayed on productions

; servers they should still be monitored and logging is a great way to do that.

; Default Value: Off

; Development Value: On

; Production Value: On

; http://php.net/log-errors

log_errors = On

; Set maximum length of log_errors. In error_log information about the source is

; added. The default is 1024 and 0 allows to not apply any maximum length at all.

; http://php.net/log-errors-max-len

log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same

; line unless ignore_repeated_source is set true.

; http://php.net/ignore-repeated-errors

ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting

; is On you will not log errors with repeated messages from different files or

; source lines.

; http://php.net/ignore-repeated-source

ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on

; stdout or in the log). This has only effect in a debug compile, and if

; error reporting includes E_WARNING in the allowed list

; http://php.net/report-memleaks

report_memleaks = On

; This setting is on by default.

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value

; to On can assist in debugging and is appropriate for development servers. It should

; however be disabled on production servers.

; This directive is DEPRECATED.

; Default Value: Off

; Development Value: Off

; Production Value: Off

; http://php.net/track-errors

;track_errors = Off

; Turn off normal error reporting and emit XML-RPC error XML

; http://php.net/xmlrpc-errors

;xmlrpc_errors = 0

; An XML-RPC faultCode

;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of formatting the

; error message as HTML for easier reading. This directive controls whether

; the error message is formatted as HTML or not.

; Note: This directive is hardcoded to Off for the CLI SAPI

; Default Value: On

; Development Value: On

; Production value: On

; http://php.net/html-errors

html_errors = On

; If html_errors is set to On *and* docref_root is not empty, then PHP

; produces clickable error messages that direct to a page describing the error

; or function causing the error in detail.

; You can download a copy of the PHP manual from http://php.net/docs

; and change docref_root to the base URL of your local copy including the

; leading '/'. You must also specify the file extension being used including

; the dot. PHP's default behavior is to leave these settings empty, in which

; case no links to documentation are generated.

; Note: Never use this feature for production boxes.

; http://php.net/docref-root

; Examples

;docref_root = "/phpmanual/"

; http://php.net/docref-ext

;docref_ext = .html

; String to output before an error message. PHP's default behavior is to leave

; this setting blank.

; http://php.net/error-prepend-string

; Example:

;error_prepend_string = "<span style='color: #ff0000'>"

; String to output after an error message. PHP's default behavior is to leave

; this setting blank.

; http://php.net/error-append-string

; Example:

;error_append_string = "</span>"

; Log errors to specified file. PHP's default behavior is to leave this value

; empty.

; http://php.net/error-log

; Example:

;error_log = php_errors.log

; Log errors to syslog (Event Log on Windows).

;error_log = syslog

;windows.show_crt_warning

; Default value: 0

; Development value: 0

; Production value: 0

;;;;;;;;;;;;;;;;;

; Data Handling ;

;;;;;;;;;;;;;;;;;

; The separator used in PHP generated URLs to separate arguments.

; PHP's default setting is "&".

; http://php.net/arg-separator.output

; Example:

;arg_separator.output = "&"

; List of separator(s) used by PHP to parse input URLs into variables.

; PHP's default setting is "&".

; NOTE: Every character in this directive is considered as separator!

; http://php.net/arg-separator.input

; Example:

;arg_separator.input = ";&"

; This directive determines which super global arrays are registered when PHP

; starts up. G,P,C,E & S are abbreviations for the following respective super

; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty

; paid for the registration of these arrays and because ENV is not as commonly

; used as the others, ENV is not recommended on productions servers. You

; can still get access to the environment variables through getenv() should you

; need to.

; Default Value: "EGPCS"

; Development Value: "GPCS"

; Production Value: "GPCS";

; http://php.net/variables-order

variables_order = "GPCS"

; This directive determines which super global data (G,P & C) should be

; registered into the super global array REQUEST. If so, it also determines

; the order in which that data is registered. The values for this directive

; are specified in the same manner as the variables_order directive,

; EXCEPT one. Leaving this value empty will cause PHP to use the value set

; in the variables_order directive. It does not mean it will leave the super

; globals array REQUEST empty.

; Default Value: None

; Development Value: "GP"

; Production Value: "GP"

; http://php.net/request-order

request_order = "GP"

; This directive determines whether PHP registers $argv & $argc each time it

; runs. $argv contains an array of all the arguments passed to PHP when a script

; is invoked. $argc contains an integer representing the number of arguments

; that were passed when the script was invoked. These arrays are extremely

; useful when running scripts from the command line. When this directive is

; enabled, registering these variables consumes CPU cycles and memory each time

; a script is executed. For performance reasons, this feature should be disabled

; on production servers.

; Note: This directive is hardcoded to On for the CLI SAPI

; Default Value: On

; Development Value: Off

; Production Value: Off

; http://php.net/register-argc-argv

register_argc_argv = Off

; When enabled, the ENV, REQUEST and SERVER variables are created when they're

; first used (Just In Time) instead of when the script starts. If these

; variables are not used within a script, having this directive on will result

; in a performance gain. The PHP directive register_argc_argv must be disabled

; for this directive to have any affect.

; http://php.net/auto-globals-jit

auto_globals_jit = On

; Whether PHP will read the POST data.

; This option is enabled by default.

; Most likely, you won't want to disable this option globally. It causes $_POST

; and $_FILES to always be empty; the only way you will be able to read the

; POST data will be through the php://input stream wrapper. This can be useful

; to proxy requests or to process the POST data in a memory efficient fashion.

; http://php.net/enable-post-data-reading

;enable_post_data_reading = Off

; Maximum size of POST data that PHP will accept.

; Its value may be 0 to disable the limit. It is ignored if POST data reading

; is disabled through enable_post_data_reading.

; http://php.net/post-max-size

post_max_size = 8M

; Automatically add files before PHP document.

; http://php.net/auto-prepend-file

auto_prepend_file =

; Automatically add files after PHP document.

; http://php.net/auto-append-file

auto_append_file =

; By default, PHP will output a media type using the Content-Type header. To

; disable this, simply set it to be empty.

;

; PHP's built-in default media type is set to text/html.

; http://php.net/default-mimetype

default_mimetype = "text/html"

; PHP's default character set is set to UTF-8.

; http://php.net/default-charset

default_charset = "UTF-8"

; PHP internal character encoding is set to empty.

; If empty, default_charset is used.

; http://php.net/internal-encoding

;internal_encoding =

; PHP input character encoding is set to empty.

; If empty, default_charset is used.

; http://php.net/input-encoding

;input_encoding =

; PHP output character encoding is set to empty.

; If empty, default_charset is used.

; See also output_buffer.

; http://php.net/output-encoding

;output_encoding =

;;;;;;;;;;;;;;;;;;;;;;;;;

; Paths and Directories ;

;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"

;include_path = ".:/php/includes"

;

; Windows: "\path1;\path2"

;include_path = ".;c:\php\includes"

;

; PHP's default setting for include_path is ".;/path/to/php/pear"

; http://php.net/include-path

; The root of the PHP pages, used only if nonempty.

; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root

; if you are running php as a CGI under any web server (other than IIS)

; see documentation for security issues.  The alternate is to use the

; cgi.force_redirect configuration below

; http://php.net/doc-root

doc_root = D:\Apache24\htdocs

; The directory under which PHP opens the script using /~username used only

; if nonempty.

; http://php.net/user-dir

user_dir =

; Directory in which the loadable extensions (modules) reside.

; http://php.net/extension-dir

; extension_dir = "./"

; On windows:

 extension_dir = "D:\phpx64\ext"

; Directory where the temporary files should be placed.

; Defaults to the system default (see sys_get_temp_dir)

; sys_temp_dir = "/tmp"

; Whether or not to enable the dl() function.  The dl() function does NOT work

; properly in multithreaded servers, such as IIS or Zeus, and is automatically

; disabled on them.

; http://php.net/enable-dl

enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under

; most web servers.  Left undefined, PHP turns this on by default.  You can

; turn it off here AT YOUR OWN RISK

; **You CAN safely turn this off for IIS, in fact, you MUST.**

; http://php.net/cgi.force-redirect

;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with

; every request. PHP's default behavior is to disable this feature.

;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape

; (iPlanet) web servers, you MAY need to set an environment variable name that PHP

; will look for to know it is OK to continue execution.  Setting this variable MAY

; cause security issues, KNOW WHAT YOU ARE DOING FIRST.

; http://php.net/cgi.redirect-status-env

;cgi.redirect_status_env =

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's

; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok

; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting

; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting

; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts

; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.

; http://php.net/cgi.fix-pathinfo

;cgi.fix_pathinfo=1

; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside

; of the web tree and people will not be able to circumvent .htaccess security.

; http://php.net/cgi.dicard-path

;cgi.discard_path=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate

; security tokens of the calling client.  This allows IIS to define the

; security context that the request runs under.  mod_fastcgi under Apache

; does not currently support this feature (03/17/2002)

; Set to 1 if running under IIS.  Default is zero.

; http://php.net/fastcgi.impersonate

;fastcgi.impersonate = 1

; Disable logging through FastCGI connection. PHP's default behavior is to enable

; this feature.

;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to

; use when sending HTTP response code. If set to 0, PHP sends Status: header that

; is supported by Apache. When this option is set to 1, PHP will send

; RFC2616 compliant header.

; Default is zero.

; http://php.net/cgi.rfc2616-headers

;cgi.rfc2616_headers = 0

; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!

; (shebang) at the top of the running script. This line might be needed if the

; script support running both as stand-alone script and via PHP CGI<. PHP in CGI

; mode skips this line and ignores its content if this directive is turned on.

; http://php.net/cgi.check-shebang-line

;cgi.check_shebang_line=1

;;;;;;;;;;;;;;;;

; File Uploads ;

;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.

; http://php.net/file-uploads

file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not

; specified).

; http://php.net/upload-tmp-dir

;upload_tmp_dir =

; Maximum allowed size for uploaded files.

; http://php.net/upload-max-filesize

upload_max_filesize = 2M

; Maximum number of files that can be uploaded via a single request

max_file_uploads = 20

;;;;;;;;;;;;;;;;;;

; Fopen wrappers ;

;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.

; http://php.net/allow-url-fopen

allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.

; http://php.net/allow-url-include

allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP's default setting

; for this is empty.

; http://php.net/from

;from="john@doe.com"

; Define the User-Agent string. PHP's default setting for this is empty.

; http://php.net/user-agent

;user_agent="PHP"

; Default timeout for socket based streams (seconds)

; http://php.net/default-socket-timeout

default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,

; or you are running on a Mac and need to deal with files from

; unix or win32 systems, setting this flag will cause PHP to

; automatically detect the EOL character in those files so that

; fgets() and file() will work regardless of the source of the file.

; http://php.net/auto-detect-line-endings

;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;

; Dynamic Extensions ;

;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following

; syntax:

;

;   extension=modulename

;

; For example:

;

;   extension=mysqli

;

; When the extension library to load is not located in the default extension

; directory, You may specify an absolute path to the library file:

;

;   extension=/path/to/extension/mysqli.so

;

; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and

; 'extension='php_<ext>.dll') is supported for legacy reasons and may be

; deprecated in a future PHP major version. So, when it is possible, please

; move to the new ('extension=<ext>) syntax.

;

; Notes for Windows environments :

;

; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+)

;   extension folders as well as the separate PECL DLL download (PHP 5+).

;   Be sure to appropriately set the extension_dir directive.

;

extension=bz2

extension=curl

extension=fileinfo

extension=gd2

extension=gettext

extension=gmp

extension=intl

extension=imap

;extension=interbase

extension=ldap

extension=mbstring

extension=exif

; Must be after mbstring as it depends on it

extension=mysqli

;extension=oci8_12c

; Use with Oracle Database 12c Instant Client

extension=odbc

extension=openssl

;extension=pdo_firebird

extension=pdo_mysql

;extension=pdo_oci

extension=pdo_odbc

extension=pdo_pgsql

extension=pdo_sqlite

extension=pgsql

extension=shmop

; The MIBS data available in the PHP distribution must be installed.

; See http://www.php.net/manual/en/snmp.installation.php

;extension=snmp

;extension=soap

;extension=sockets

;extension=sqlite3

;extension=tidy

;extension=xmlrpc

;extension=xsl

;;;;;;;;;;;;;;;;;;;

; Module Settings ;

;;;;;;;;;;;;;;;;;;;

[CLI Server]

; Whether the CLI web server uses ANSI color coding in its terminal output.

cli_server.color = On

[Date]

; Defines the default timezone used by the date functions

; http://php.net/date.timezone

;date.timezone =

; http://php.net/date.default-latitude

;date.default_latitude = 31.7667

; http://php.net/date.default-longitude

;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith

;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith

;date.sunset_zenith = 90.583333

[filter]

; http://php.net/filter.default

;filter.default = unsafe_raw

; http://php.net/filter.default-flags

;filter.default_flags =

[iconv]

; Use of this INI entry is deprecated, use global input_encoding instead.

; If empty, default_charset or input_encoding or iconv.input_encoding is used.

; The precedence is: default_charset < intput_encoding < iconv.input_encoding

;iconv.input_encoding =

; Use of this INI entry is deprecated, use global internal_encoding instead.

; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.

; The precedence is: default_charset < internal_encoding < iconv.internal_encoding

;iconv.internal_encoding =

; Use of this INI entry is deprecated, use global output_encoding instead.

; If empty, default_charset or output_encoding or iconv.output_encoding is used.

; The precedence is: default_charset < output_encoding < iconv.output_encoding

; To use an output encoding conversion, iconv's output handler must be set

; otherwise output encoding conversion cannot be performed.

;iconv.output_encoding =

[intl]

;intl.default_locale =

; This directive allows you to produce PHP errors when some error

; happens within intl functions. The value is the level of the error produced.

; Default is 0, which does not produce any errors.

;intl.error_level = E_WARNING

;intl.use_exceptions = 0

[sqlite3]

;sqlite3.extension_dir =

[Pcre]

;PCRE library backtracking limit.

; http://php.net/pcre.backtrack-limit

;pcre.backtrack_limit=100000

;PCRE library recursion limit.

;Please note that if you set this value to a high number you may consume all

;the available process stack and eventually crash PHP (due to reaching the

;stack size limit imposed by the Operating System).

; http://php.net/pcre.recursion-limit

;pcre.recursion_limit=100000

;Enables or disables JIT compilation of patterns. This requires the PCRE

;library to be compiled with JIT support.

;pcre.jit=1

[Pdo]

; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"

; http://php.net/pdo-odbc.connection-pooling

;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]

; If mysqlnd is used: Number of cache slots for the internal result set cache

; http://php.net/pdo_mysql.cache_size

pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects.  If empty, uses the built-in

; MySQL defaults.

; http://php.net/pdo_mysql.default-socket

pdo_mysql.default_socket=

[Phar]

; http://php.net/phar.readonly

;phar.readonly = On

; http://php.net/phar.require-hash

;phar.require_hash = On

;phar.cache_list =

[mail function]

; For Win32 only.

; http://php.net/smtp

SMTP = localhost

; http://php.net/smtp-port

smtp_port = 25

; For Win32 only.

; http://php.net/sendmail-from

;sendmail_from = me@example.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").

; http://php.net/sendmail-path

;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters

; to the sendmail binary. These parameters will always replace the value of

; the 5th parameter to mail().

;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename

mail.add_x_header = Off

; The path to a log file that will log all mail() calls. Log entries include

; the full path of the script, line number, To address and headers.

;mail.log =

; Log mail to syslog (Event Log on Windows).

;mail.log = syslog

[ODBC]

; http://php.net/odbc.default-db

;odbc.default_db    =  Not yet implemented

; http://php.net/odbc.default-user

;odbc.default_user  =  Not yet implemented

; http://php.net/odbc.default-pw

;odbc.default_pw    =  Not yet implemented

; Controls the ODBC cursor model.

; Default: SQL_CURSOR_STATIC (default).

;odbc.default_cursortype

; Allow or prevent persistent links.

; http://php.net/odbc.allow-persistent

odbc.allow_persistent = On

; Check that a connection is still valid before reuse.

; http://php.net/odbc.check-persistent

odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.

; http://php.net/odbc.max-persistent

odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.

; http://php.net/odbc.max-links

odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means

; passthru.

; http://php.net/odbc.defaultlrl

odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.

; See the documentation on odbc_binmode and odbc_longreadlen for an explanation

; of odbc.defaultlrl and odbc.defaultbinmode

; http://php.net/odbc.defaultbinmode

odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]

; Allow or prevent persistent links.

ibase.allow_persistent = 1

; Maximum number of persistent links.  -1 means no limit.

ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.

ibase.max_links = -1

; Default database name for ibase_connect().

;ibase.default_db =

; Default username for ibase_connect().

;ibase.default_user =

; Default password for ibase_connect().

;ibase.default_password =

; Default charset for ibase_connect().

;ibase.default_charset =

; Default timestamp format.

ibase.timestampformat = "%Y-%m-%d %H:%M:%S"

; Default date format.

ibase.dateformat = "%Y-%m-%d"

; Default time format.

ibase.timeformat = "%H:%M:%S"

[MySQLi]

; Maximum number of persistent links.  -1 means no limit.

; http://php.net/mysqli.max-persistent

mysqli.max_persistent = -1

; Allow accessing, from PHP's perspective, local files with LOAD DATA statements

; http://php.net/mysqli.allow_local_infile

;mysqli.allow_local_infile = On

; Allow or prevent persistent links.

; http://php.net/mysqli.allow-persistent

mysqli.allow_persistent = On

; Maximum number of links.  -1 means no limit.

; http://php.net/mysqli.max-links

mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result set cache

; http://php.net/mysqli.cache_size

mysqli.cache_size = 2000

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use

; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the

; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look

; at MYSQL_PORT.

; http://php.net/mysqli.default-port

mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in

; MySQL defaults.

; http://php.net/mysqli.default-socket

mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).

; http://php.net/mysqli.default-host

mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).

; http://php.net/mysqli.default-user

mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).

; Note that this is generally a *bad* idea to store passwords in this file.

; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")

; and reveal this password!  And of course, any users with read access to this

; file will be able to reveal the password as well.

; http://php.net/mysqli.default-pw

mysqli.default_pw =

; Allow or prevent reconnect

mysqli.reconnect = Off

[mysqlnd]

; Enable / Disable collection of general statistics by mysqlnd which can be

; used to tune and monitor MySQL operations.

; http://php.net/mysqlnd.collect_statistics

mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statistics by mysqlnd which can be

; used to tune and monitor MySQL operations.

; http://php.net/mysqlnd.collect_memory_statistics

mysqlnd.collect_memory_statistics = Off

; Records communication from all extensions using mysqlnd to the specified log

; file.

; http://php.net/mysqlnd.debug

;mysqlnd.debug =

; Defines which queries will be logged.

; http://php.net/mysqlnd.log_mask

;mysqlnd.log_mask = 0

; Default size of the mysqlnd memory pool, which is used by result sets.

; http://php.net/mysqlnd.mempool_default_size

;mysqlnd.mempool_default_size = 16000

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.

; http://php.net/mysqlnd.net_cmd_buffer_size

;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in

; bytes.

; http://php.net/mysqlnd.net_read_buffer_size

;mysqlnd.net_read_buffer_size = 32768

; Timeout for network requests in seconds.

; http://php.net/mysqlnd.net_read_timeout

;mysqlnd.net_read_timeout = 31536000

; SHA-256 Authentication Plugin related. File with the MySQL server public RSA

; key.

; http://php.net/mysqlnd.sha256_server_public_key

;mysqlnd.sha256_server_public_key =

[OCI8]

; Connection: Enables privileged connections using external

; credentials (OCI_SYSOPER, OCI_SYSDBA)

; http://php.net/oci8.privileged-connect

;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per

; process. Using -1 means no limit.

; http://php.net/oci8.max-persistent

;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to

; maintain an idle persistent connection. Using -1 means idle

; persistent connections will be maintained forever.

; http://php.net/oci8.persistent-timeout

;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a

; ping during oci_pconnect() to check the connection validity. When

; set to 0, each oci_pconnect() will cause a ping. Using -1 disables

; pings completely.

; http://php.net/oci8.ping-interval

;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used

; for all pooled server requests with Oracle 11g Database Resident

; Connection Pooling (DRCP).  To use DRCP, this value should be set to

; the same string for all web servers running the same application,

; the database pool must be configured, and the connection string must

; specify to use a pooled server.

;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application

; Notification (FAN) events generated when a database node fails. The

; database must also be configured to post FAN events.

;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how

; many statements to cache. Using 0 disables statement caching.

; http://php.net/oci8.statement-cache-size

;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of

; rows that will be fetched automatically after statement execution.

; http://php.net/oci8.default-prefetch

;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close

; oci_connect() and oci_new_connect() connections.

; http://php.net/oci8.old-oci-close-semantics

;oci8.old_oci_close_semantics = Off

[PostgreSQL]

; Allow or prevent persistent links.

; http://php.net/pgsql.allow-persistent

pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().

; Auto reset feature requires a little overheads.

; http://php.net/pgsql.auto-reset-persistent

pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.

; http://php.net/pgsql.max-persistent

pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.

; http://php.net/pgsql.max-links

pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.

; Notice message logging require a little overheads.

; http://php.net/pgsql.ignore-notice

pgsql.ignore_notice = 0

; Log PostgreSQL backends Notice message or not.

; Unless pgsql.ignore_notice=0, module cannot log notice message.

; http://php.net/pgsql.log-notice

pgsql.log_notice = 0

[bcmath]

; Number of decimal digits for all bcmath functions.

; http://php.net/bcmath.scale

bcmath.scale = 0

[browscap]

; http://php.net/browscap

;browscap = extra/browscap.ini

[Session]

; Handler used to store/retrieve data.

; http://php.net/session.save-handler

session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path

; where data files are stored. Note: Windows users have to change this

; variable in order to use PHP's session functions.

;

; The path can be defined as:

;

;     session.save_path = "N;/path"

;

; where N is an integer.  Instead of storing all the session files in

; /path, what this will do is use subdirectories N-levels deep, and

; store the session data in those directories.  This is useful if

; your OS has problems with many files in one directory, and is

; a more efficient layout for servers that handle many sessions.

;

; NOTE 1: PHP will not create this directory structure automatically.

;         You can use the script in the ext/session dir for that purpose.

; NOTE 2: See the section on garbage collection below if you choose to

;         use subdirectories for session storage

;

; The file storage module creates files using mode 600 by default.

; You can change that by using

;

;     session.save_path = "N;MODE;/path"

;

; where MODE is the octal representation of the mode. Note that this

; does not overwrite the process's umask.

; http://php.net/session.save-path

;session.save_path = "/tmp"

; Whether to use strict session mode.

; Strict session mode does not accept uninitialized session ID and regenerate

; session ID if browser sends uninitialized session ID. Strict mode protects

; applications from session fixation via session adoption vulnerability. It is

; disabled by default for maximum compatibility, but enabling it is encouraged.

; https://wiki.php.net/rfc/strict_sessions

session.use_strict_mode = 0

; Whether to use cookies.

; http://php.net/session.use-cookies

session.use_cookies = 1

; http://php.net/session.cookie-secure

;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining

; the session id. We encourage this operation as it's very helpful in combating

; session hijacking when not specifying and managing your own session id. It is

; not the be-all and end-all of session hijacking defense, but it's a good start.

; http://php.net/session.use-only-cookies

session.use_only_cookies = 1

; Name of the session (used as cookie name).

; http://php.net/session.name

session.name = PHPSESSID

; Initialize session on request startup.

; http://php.net/session.auto-start

session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.

; http://php.net/session.cookie-lifetime

session.cookie_lifetime = 0

; The path for which the cookie is valid.

; http://php.net/session.cookie-path

session.cookie_path = /

; The domain for which the cookie is valid.

; http://php.net/session.cookie-domain

session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.

; http://php.net/session.cookie-httponly

session.cookie_httponly =

; Handler used to serialize data.  php is the standard serializer of PHP.

; http://php.net/session.serialize-handler

session.serialize_handler = php

; Defines the probability that the 'garbage collection' process is started

; on every session initialization. The probability is calculated by using

; gc_probability/gc_divisor. Where session.gc_probability is the numerator

; and gc_divisor is the denominator in the equation. Setting this value to 1

; when the session.gc_divisor value is 100 will give you approximately a 1% chance

; the gc will run on any give request.

; Default Value: 1

; Development Value: 1

; Production Value: 1

; http://php.net/session.gc-probability

session.gc_probability = 1

; Defines the probability that the 'garbage collection' process is started on every

; session initialization. The probability is calculated by using the following equation:

; gc_probability/gc_divisor. Where session.gc_probability is the numerator and

; session.gc_divisor is the denominator in the equation. Setting this value to 1

; when the session.gc_divisor value is 100 will give you approximately a 1% chance

; the gc will run on any give request. Increasing this value to 1000 will give you

; a 0.1% chance the gc will run on any give request. For high volume production servers,

; this is a more efficient approach.

; Default Value: 100

; Development Value: 1000

; Production Value: 1000

; http://php.net/session.gc-divisor

session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as 'garbage' and

; cleaned up by the garbage collection process.

; http://php.net/session.gc-maxlifetime

session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files

;       (see session.save_path above), then garbage collection does *not*

;       happen automatically.  You will need to do your own garbage

;       collection through a shell script, cron entry, or some other method.

;       For example, the following script would is the equivalent of

;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):

;          find /path/to/sessions -cmin +24 -type f | xargs rm

; Check HTTP Referer to invalidate externally stored URLs containing ids.

; HTTP_REFERER has to contain this substring for the session to be

; considered as valid.

; http://php.net/session.referer-check

session.referer_check =

; Set to {nocache,private,public,} to determine HTTP caching aspects

; or leave this empty to avoid sending anti-caching headers.

; http://php.net/session.cache-limiter

session.cache_limiter = nocache

; Document expires after n minutes.

; http://php.net/session.cache-expire

session.cache_expire = 180

; trans sid support is disabled by default.

; Use of trans sid may risk your users' security.

; Use this option with caution.

; - User may send URL contains active session ID

;   to other person via. email/irc/etc.

; - URL that contains active session ID may be stored

;   in publicly accessible computer.

; - User may access your site with the same session ID

;   always using URL stored in browser's history or bookmarks.

; http://php.net/session.use-trans-sid

session.use_trans_sid = 0

; Set session ID character length. This value could be between 22 to 256.

; Shorter length than default is supported only for compatibility reason.

; Users should use 32 or more chars.

; http://php.net/session.sid-length

; Default Value: 32

; Development Value: 26

; Production Value: 26

session.sid_length = 26

; The URL rewriter will look for URLs in a defined set of HTML tags.

; <form> is special; if you include them here, the rewriter will

; add a hidden <input> field with the info which is otherwise appended

; to URLs. <form> tag's action attribute URL will not be modified

; unless it is specified.

; Note that all valid entries require a "=", even if no value follows.

; Default Value: "a=href,area=href,frame=src,form="

; Development Value: "a=href,area=href,frame=src,form="

; Production Value: "a=href,area=href,frame=src,form="

; http://php.net/url-rewriter.tags

session.trans_sid_tags = "a=href,area=href,frame=src,form="

; URL rewriter does not rewrite absolute URLs by default.

; To enable rewrites for absolute pathes, target hosts must be specified

; at RUNTIME. i.e. use ini_set()

; <form> tags is special. PHP will check action attribute's URL regardless

; of session.trans_sid_tags setting.

; If no host is defined, HTTP_HOST will be used for allowed host.

; Example value: php.net,www.php.net,wiki.php.net

; Use "," for multiple hosts. No spaces are allowed.

; Default Value: ""

; Development Value: ""

; Production Value: ""

;session.trans_sid_hosts=""

; Define how many bits are stored in each character when converting

; the binary hash data to something readable.

; Possible values:

;   4  (4 bits: 0-9, a-f)

;   5  (5 bits: 0-9, a-v)

;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")

; Default Value: 4

; Development Value: 5

; Production Value: 5

; http://php.net/session.hash-bits-per-character

session.sid_bits_per_character = 5

; Enable upload progress tracking in $_SESSION

; Default Value: On

; Development Value: On

; Production Value: On

; http://php.net/session.upload-progress.enabled

;session.upload_progress.enabled = On

; Cleanup the progress information as soon as all POST data has been read

; (i.e. upload completed).

; Default Value: On

; Development Value: On

; Production Value: On

; http://php.net/session.upload-progress.cleanup

;session.upload_progress.cleanup = On

; A prefix used for the upload progress key in $_SESSION

; Default Value: "upload_progress_"

; Development Value: "upload_progress_"

; Production Value: "upload_progress_"

; http://php.net/session.upload-progress.prefix

;session.upload_progress.prefix = "upload_progress_"

; The index name (concatenated with the prefix) in $_SESSION

; containing the upload progress information

; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"

; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"

; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"

; http://php.net/session.upload-progress.name

;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"

; How frequently the upload progress should be updated.

; Given either in percentages (per-file), or in bytes

; Default Value: "1%"

; Development Value: "1%"

; Production Value: "1%"

; http://php.net/session.upload-progress.freq

;session.upload_progress.freq =  "1%"

; The minimum delay between updates, in seconds

; Default Value: 1

; Development Value: 1

; Production Value: 1

; http://php.net/session.upload-progress.min-freq

;session.upload_progress.min_freq = "1"

; Only write session data when session data is changed. Enabled by default.

; http://php.net/session.lazy-write

;session.lazy_write = On

[Assertion]

; Switch whether to compile assertions at all (to have no overhead at run-time)

; -1: Do not compile at all

;  0: Jump over assertion at run-time

;  1: Execute assertions

; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)

; Default Value: 1

; Development Value: 1

; Production Value: -1

; http://php.net/zend.assertions

zend.assertions = -1

; Assert(expr); active by default.

; http://php.net/assert.active

;assert.active = On

; Throw an AssertationException on failed assertions

; http://php.net/assert.exception

;assert.exception = On

; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)

; http://php.net/assert.warning

;assert.warning = On

; Don't bail out by default.

; http://php.net/assert.bail

;assert.bail = Off

; User-function to be called if an assertion fails.

; http://php.net/assert.callback

;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if you want

; error_reporting(0) around the eval().

; http://php.net/assert.quiet-eval

;assert.quiet_eval = 0

[COM]

; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs

; http://php.net/com.typelib-file

;com.typelib_file =

; allow Distributed-COM calls

; http://php.net/com.allow-dcom

;com.allow_dcom = true

; autoregister constants of a components typlib on com_load()

; http://php.net/com.autoregister-typelib

;com.autoregister_typelib = true

; register constants casesensitive

; http://php.net/com.autoregister-casesensitive

;com.autoregister_casesensitive = false

; show warnings on duplicate constant registrations

; http://php.net/com.autoregister-verbose

;com.autoregister_verbose = true

; The default character set code-page to use when passing strings to and from COM objects.

; Default: system ANSI code page

;com.code_page=

[mbstring]

; language for internal character representation.

; This affects mb_send_mail() and mbstring.detect_order.

; http://php.net/mbstring.language

;mbstring.language = Japanese

; Use of this INI entry is deprecated, use global internal_encoding instead.

; internal/script encoding.

; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)

; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.

; The precedence is: default_charset < internal_encoding < iconv.internal_encoding

;mbstring.internal_encoding =

; Use of this INI entry is deprecated, use global input_encoding instead.

; http input encoding.

; mbstring.encoding_traslation = On is needed to use this setting.

; If empty, default_charset or input_encoding or mbstring.input is used.

; The precedence is: default_charset < intput_encoding < mbsting.http_input

; http://php.net/mbstring.http-input

;mbstring.http_input =

; Use of this INI entry is deprecated, use global output_encoding instead.

; http output encoding.

; mb_output_handler must be registered as output buffer to function.

; If empty, default_charset or output_encoding or mbstring.http_output is used.

; The precedence is: default_charset < output_encoding < mbstring.http_output

; To use an output encoding conversion, mbstring's output handler must be set

; otherwise output encoding conversion cannot be performed.

; http://php.net/mbstring.http-output

;mbstring.http_output =

; enable automatic encoding translation according to

; mbstring.internal_encoding setting. Input chars are

; converted to internal encoding by setting this to On.

; Note: Do _not_ use automatic encoding translation for

;       portable libs/applications.

; http://php.net/mbstring.encoding-translation

;mbstring.encoding_translation = Off

; automatic encoding detection order.

; "auto" detect order is changed according to mbstring.language

; http://php.net/mbstring.detect-order

;mbstring.detect_order = auto

; substitute_character used when character cannot be converted

; one from another

; http://php.net/mbstring.substitute-character

;mbstring.substitute_character = none

; overload(replace) single byte functions by mbstring functions.

; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),

; etc. Possible values are 0,1,2,4 or combination of them.

; For example, 7 for overload everything.

; 0: No overload

; 1: Overload mail() function

; 2: Overload str*() functions

; 4: Overload ereg*() functions

; http://php.net/mbstring.func-overload

;mbstring.func_overload = 0

; enable strict encoding detection.

; Default: Off

;mbstring.strict_detection = On

; This directive specifies the regex pattern of content types for which mb_output_handler()

; is activated.

; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)

;mbstring.http_output_conv_mimetype=

[gd]

; Tell the jpeg decode to ignore warnings and try to create

; a gd image. The warning will then be displayed as notices

; disabled by default

; http://php.net/gd.jpeg-ignore-warning

;gd.jpeg_ignore_warning = 1

[exif]

; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.

; With mbstring support this will automatically be converted into the encoding

; given by corresponding encode setting. When empty mbstring.internal_encoding

; is used. For the decode settings you can distinguish between motorola and

; intel byte order. A decode setting cannot be empty.

; http://php.net/exif.encode-unicode

;exif.encode_unicode = ISO-8859-15

; http://php.net/exif.decode-unicode-motorola

;exif.decode_unicode_motorola = UCS-2BE

; http://php.net/exif.decode-unicode-intel

;exif.decode_unicode_intel    = UCS-2LE

; http://php.net/exif.encode-jis

;exif.encode_jis =

; http://php.net/exif.decode-jis-motorola

;exif.decode_jis_motorola = JIS

; http://php.net/exif.decode-jis-intel

;exif.decode_jis_intel    = JIS

[Tidy]

; The path to a default tidy configuration file to use when using tidy

; http://php.net/tidy.default-config

;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?

; WARNING: Do not use this option if you are generating non-html content

; such as dynamic images

; http://php.net/tidy.clean-output

tidy.clean_output = Off

[soap]

; Enables or disables WSDL caching feature.

; http://php.net/soap.wsdl-cache-enabled

soap.wsdl_cache_enabled=1

; Sets the directory name where SOAP extension will put cache files.

; http://php.net/soap.wsdl-cache-dir

soap.wsdl_cache_dir="/tmp"

; (time to live) Sets the number of second while cached file will be used

; instead of original one.

; http://php.net/soap.wsdl-cache-ttl

soap.wsdl_cache_ttl=86400

; Sets the size of the cache limit. (Max. number of WSDL files to cache)

soap.wsdl_cache_limit = 5

[sysvshm]

; A default size of the shared memory segment

;sysvshm.init_mem = 10000

[ldap]

; Sets the maximum number of open links or -1 for unlimited.

ldap.max_links = -1

[dba]

;dba.default_handler=

[opcache]

; Determines if Zend OPCache is enabled

;opcache.enable=1

; Determines if Zend OPCache is enabled for the CLI version of PHP

;opcache.enable_cli=0

; The OPcache shared memory storage size.

;opcache.memory_consumption=128

; The amount of memory for interned strings in Mbytes.

;opcache.interned_strings_buffer=8

; The maximum number of keys (scripts) in the OPcache hash table.

; Only numbers between 200 and 1000000 are allowed.

;opcache.max_accelerated_files=10000

; The maximum percentage of "wasted" memory until a restart is scheduled.

;opcache.max_wasted_percentage=5

; When this directive is enabled, the OPcache appends the current working

; directory to the script key, thus eliminating possible collisions between

; files with the same name (basename). Disabling the directive improves

; performance, but may break existing applications.

;opcache.use_cwd=1

; When disabled, you must reset the OPcache manually or restart the

; webserver for changes to the filesystem to take effect.

;opcache.validate_timestamps=1

; How often (in seconds) to check file timestamps for changes to the shared

; memory storage allocation. ("1" means validate once per second, but only

; once per request. "0" means always validate)

;opcache.revalidate_freq=2

; Enables or disables file search in include_path optimization

;opcache.revalidate_path=0

; If disabled, all PHPDoc comments are dropped from the code to reduce the

; size of the optimized code.

;opcache.save_comments=1

; Allow file existence override (file_exists, etc.) performance feature.

;opcache.enable_file_override=0

; A bitmask, where each bit enables or disables the appropriate OPcache

; passes

;opcache.optimization_level=0xffffffff

;opcache.inherited_hack=1

;opcache.dups_fix=0

; The location of the OPcache blacklist file (wildcards allowed).

; Each OPcache blacklist file is a text file that holds the names of files

; that should not be accelerated. The file format is to add each filename

; to a new line. The filename may be a full path or just a file prefix

; (i.e., /var/www/x  blacklists all the files and directories in /var/www

; that start with 'x'). Line starting with a ; are ignored (comments).

;opcache.blacklist_filename=

; Allows exclusion of large files from being cached. By default all files

; are cached.

;opcache.max_file_size=0

; Check the cache checksum each N requests.

; The default value of "0" means that the checks are disabled.

;opcache.consistency_checks=0

; How long to wait (in seconds) for a scheduled restart to begin if the cache

; is not being accessed.

;opcache.force_restart_timeout=180

; OPcache error_log file name. Empty string assumes "stderr".

;opcache.error_log=

; All OPcache errors go to the Web server log.

; By default, only fatal errors (level 0) or errors (level 1) are logged.

; You can also enable warnings (level 2), info messages (level 3) or

; debug messages (level 4).

;opcache.log_verbosity_level=1

; Preferred Shared Memory back-end. Leave empty and let the system decide.

;opcache.preferred_memory_model=

; Protect the shared memory from unexpected writing during script execution.

; Useful for internal debugging only.

;opcache.protect_memory=0

; Allows calling OPcache API functions only from PHP scripts which path is

; started from specified string. The default "" means no restriction

;opcache.restrict_api=

; Mapping base of shared memory segments (for Windows only). All the PHP

; processes have to map shared memory into the same address space. This

; directive allows to manually fix the "Unable to reattach to base address"

; errors.

;opcache.mmap_base=

; Enables and sets the second level cache directory.

; It should improve performance when SHM memory is full, at server restart or

; SHM reset. The default "" disables file based caching.

;opcache.file_cache=

; Enables or disables opcode caching in shared memory.

;opcache.file_cache_only=0

; Enables or disables checksum validation when script loaded from file cache.

;opcache.file_cache_consistency_checks=1

; Implies opcache.file_cache_only=1 for a certain process that failed to

; reattach to the shared memory (for Windows only). Explicitly enabled file

; cache is required.

;opcache.file_cache_fallback=1

; Enables or disables copying of PHP code (text segment) into HUGE PAGES.

; This should improve performance, but requires appropriate OS configuration.

;opcache.huge_code_pages=1

; Validate cached file permissions.

;opcache.validate_permission=0

; Prevent name collisions in chroot'ed environment.

;opcache.validate_root=0

; If specified, it produces opcode dumps for debugging different stages of

; optimizations.

;opcache.opt_debug_level=0

[curl]

; A default value for the CURLOPT_CAINFO option. This is required to be an

; absolute path.

;curl.cainfo =

[openssl]

; The location of a Certificate Authority (CA) file on the local filesystem

; to use when verifying the identity of SSL/TLS peers. Most users should

; not specify a value for this directive as PHP will attempt to use the

; OS-managed cert stores in its absence. If specified, this value may still

; be overridden on a per-stream basis via the "cafile" SSL stream context

; option.

;openssl.cafile=

; If openssl.cafile is not specified or if the CA file is not found, the

; directory pointed to by openssl.capath is searched for a suitable

; certificate. This value must be a correctly hashed certificate directory.

; Most users should not specify a value for this directive as PHP will

; attempt to use the OS-managed cert stores in its absence. If specified,

; this value may still be overridden on a per-stream basis via the "capath"

; SSL stream context option.

;openssl.capath=

; Local Variables:

; tab-width: 4

; End:

　在浏览器地址栏输入：

http://localhost:8088/index.php 看看测试是否成功。

PHP 在WIN10 下配置的更多相关文章

Win10下配置Java 环境变量
在Win10中配置环境变量的方法跟在Win8和Win7中有些不同,看了看网上好多还是Win7/8里面的配置方法.虽然从原理上基本上没什么问题,但有些细节却会让人很苦恼.特意整理下新的配置方法.我假定你 ...
win10下配置默认软件（转）
add by zhj: 以配置默认浏览器为例说明,配置其它程序类似原文:https://blog.csdn.net/u013246898/article/details/52032567 第一步:在 ...
[Environment Build] Win10下配置Apach Tomcat
Download URL http://tomcat.apache.org/download-80.cgi Get Binary Distributions according to you PC c ...
win10下配置chromedrive。
0x01:查看自己chrome的版本号点击chrome右上角菜单栏,帮助,关于Google chrome,在这里,你可以看到自己chrome的版本号. 0x02:下载对应的chrome drive ...
win10下配置python环境变量（Python配置环境变量）
从官网下载Windows下的python版本,一路按照默认进行安装. 安装之后配置环境变量的步骤如下: 1,点“我的电脑”,右键选“属性”. 2,选择“高级系统设置”--->选“环境变量”--- ...
win10下配置多个mysql数据库
mysql正常安装步骤:下载安装参考: 我配置的时8.0.13和5.7.27这两个版本: 配置完第一个数据库之后:复制ini文件给第二个数据库注意修改文件的端口时,先确认端口是否被占用 [mysql] ...
win10下配置php环境变量
下载php,解压. 比如解压到E盘,目录为"E:\PHP". 打开php目录,复制一个php.ini-development文件,改名为php.ini. 打开php.ini,将 e ...
win10 下配置php环境变量
注意,只需要配置到目录即可:
win10下GO的环境配置
目录问题描述环境变量配置问题描述 win10 下配置 GO 语言的运行环境,主要是环境变量的设置环境变量配置在windows的PATH变量中添加go的可执行文件所在的目录: PATH=D:\ ...

随机推荐

bash编程-Shell变量
bash中,所有变量的值默认均为字符串. 1. 变量操作调用变量 $变量查看变量(所有类型) set 删除变量 unset 变量 2. 变量分类 2.1 自定义变量自定义变量仅对当前Shell有 ...
Visual Studio 2017 调试器的工作进程（msvsmon.exe）意外退出调试将终止
开发环境: Windows 10 in Parallels Desktop Visual Studio 15.6 场景还原: 使用 Visual Studio 15.6 (即 Visual Studi ...
Android开发 - 更"聪明"的申请权限方式
在Android6.0以后,很多权限需要动态申请,只有在用户点同意后,我们才能使用对应API,因此,正确申请权限就显得很重要. 常用方式通常我们使用这种方式来判断权限状态: private stat ...
在源文件（.c）和头文件（.h）中声明和定义的区别——C语言
最近在看多文件编程的时候遇到的一个问题,本来以为理解了声明和定义的区别(然而并没有····),也算是重新认识了一次声明和定义,下面上代码情形一:在源文件(.c)中相信大部分读者对声明和定义的理解是 ...
ArrayList的实现原理
ArrayList的线性复杂度是1.想确定一个数据,直接通过索引进行访问.实际上这个过程和数组是非常相似的.ArrayList在整个使用过程中,如果想要高效操作,最好设置一个数组的大小.在个数固定的情 ...
.Net开源myrtille远程连接服务（支持SSH）
今天在博客园首页,无意中看到一篇文章(https://github.com/Microsoft/dotnet/blob/master/dotnet-developer-projects.md),于是对 ...
Spring Cloud OAuth2.0 微服务中配置 Jwt Token 签名/验证
关于 Jwt Token 的签名与安全性前面已经做了几篇介绍,在 IdentityServer4 中定义了 Jwt Token 与 Reference Token 两种验证方式(https://www ...
[java核心技术01]__继承与多态、重载与重写、抽象类与接口
前言前面简单学习了面向对象的知识,知道了其两个重要的特性,继承与多态,今天就围绕着面向对象的这两个特性,将继承与多态及相关的几个几个定义重载与重写,抽象类与接口的相关知识具体学习一下. 类的继承关 ...
ClickHouse之简单性能测试
前面的文章ClickHouse之初步认识已经简单的介绍了ClickHouse,接下来进行简单的性能测试.测试数据来源于美国民用航班的数据,从1987年到2017年,有1.7亿条. 环境: centos ...
Spring Framework简介
作者关于此主题早期文章 Spring框架快速入门起源要谈Spring的历史,就要先谈J2EE.J2EE应用程序的广泛实现是在1999年和2000年开始的,它的出现带来了诸如事务管理之类的核心中间层 ...

PHP 在WIN10 下配置

PHP 在WIN10 下配置的更多相关文章

随机推荐

热门专题