linux下添加逻辑分区并挂载(手动和自动方式)
一、查看新磁盘
[root@desktop61 Desktop]# fdisk -cul /dev/sdc
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
二添加逻辑分区
[root@desktop61 Desktop]# fdisk -cu /dev/sdc
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x740491c5.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
e---------------〉选择扩展分区
Partition number (1-4): 2
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): 10G
Value out of range.
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +10G
Command (m for help): N
Command action
l logical (5 or over)
p primary partition (1-4)
L-----------------〉选择逻辑分区
First sector (4096-20973567, default 4096):
Using default value 4096
Last sector, +sectors or +size{K,M,G} (4096-20973567, default 20973567): +5G
Command (m for help): N
Command action
l logical (5 or over)
p primary partition (1-4)
L-------------------〉选择逻辑分区
First sector (10491904-20973567, default 10491904):
Using default value 10491904
Last sector, +sectors or +size{K,M,G} (10491904-20973567, default 20973567): +5G
Value out of range.
Last sector, +sectors or +size{K,M,G} (10491904-20973567, default 20973567):
Using default value 20973567
Command (m for help): P--------------->打印分区列表
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740491c5
Device Boot Start End Blocks Id System
/dev/sdc2 2048 20973567 10485760 5 Extended
/dev/sdc5 4096 10489855 5242880 83 Linux
/dev/sdc6 10491904 20973566 5240831+ 83 Linux
自动命名逻辑分区为:sdc5 sdc6
Command (m for help): w------------------>保存退出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@desktop61 Desktop]# part
parted partprobe partx
[root@desktop61 Desktop]# partx -a /dev/sdc
BLKPG: Device or resource busy
error adding partition 2
BLKPG: Device or resource busy
error adding partition 5
BLKPG: Device or resource busy
error adding partition 6
三、查看新分区
[root@desktop61 Desktop]# fdisk -cu /dev/sdc
Command (m for help): p
Disk /dev/sdc: 21.5 GB, 21474836480 bytes
139 heads, 49 sectors/track, 6158 cylinders, total 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x740491c5
Device Boot Start End Blocks Id System
/dev/sdc2 2048 20973567 10485760 5 Extended
/dev/sdc5 4096 10489855 5242880 83 Linux
/dev/sdc6 10491904 20973566 5240831+ 83 Linux
Command (m for help): q
四、格式化分区
1sdc5
[root@desktop61 Desktop]# mkfs.ext4 /dev/sdc5
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310720 blocks
65536 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
2sdc6
[root@desktop61 Desktop]# mkfs.ext4 /dev/sdc6
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310207 blocks
65510 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
五、新建挂载目录
[root@desktop61 Desktop]# cd /mnt/
[root@desktop61 mnt]# ls
hgfs
[root@desktop61 mnt]# mkdir sdc{5,6}
[root@desktop61 mnt]# ls
hgfs sdc5 sdc6
[root@desktop61 mnt]# pwd
/mnt
六、分别自动挂载sdc5、sdc6到/mnt/sdc5 、 /mnt/sdc6
[root@desktop61 mnt]# mount /dev/sdc5 /mnt/sdc5
[root@desktop61 mnt]# mount /dev/sdc6 /mnt/sdc6
七、查可挂载是否成功
[root@desktop61 mnt]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
/dev/sdc5 on /mnt/sdc5 type ext4 (rw)
/dev/sdc6 on /mnt/sdc6 type ext4 (rw)
九、卸载sdc5 sdc6
[root@desktop61 mnt]# umount /dev/sdc5
[root@desktop61 mnt]# umount /dev/sdc6
[root@desktop61 mnt]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
十、手工挂载
1、查看sdb5的UUID
[root@desktop61 mnt]#blkid /dev/sdb5
2、手工挂载sdb5、sdb6
[root@desktop61 mnt]# cd /etc
[root@desktop61 etc]# vi fstab
#
# /etc/fstab
# Created by anaconda on Fri Apr 11 00:49:26 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vol0-root / ext4 defaults 1 1
UUID=9353a628-e49f-4675-abf4-b0fe76b38fbc /boot ext4 defaults 1 2
/dev/mapper/vol0-home /home ext4 defaults 1 2
UUID=f3d4a81c-f2d6-48d8-be1a-35647cd74615 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
UUID=dfa6e086-e5be-4856-9e8d-9565d52b82e6 /mnt/sdc5 ext4 defaults 0 0
/dev/sdc6 /mnt/sdc6 ext4 defaults 0 0
方式有通过分区名和UUID
十一、查看挂载结果
[root@desktop61 etc]# mount -a------------------〉刷新mount
[root@desktop61 etc]# mount
/dev/mapper/vol0-root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0")
/dev/sda1 on /boot type ext4 (rw)
/dev/mapper/vol0-home on /home type ext4 (rw)
/dev/sdb5 on /tmp/sdb5 type ext4 (rw)
/dev/sdb6 on /tmp/sdb6 type ext4 (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
vmware-vmblock on /var/run/vmblock-fuse type fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev)
/dev/sdc5 on /mnt/sdc5 type ext4 (rw)
/dev/sdc6 on /mnt/sdc6 type ext4 (rw)
[root@desktop61 etc]#
linux下添加逻辑分区并挂载(手动和自动方式)的更多相关文章
- Ubuntu下添加新分区并设置挂载点
Ubuntu下添加新分区并设置挂载点 最近在做Android项目,可是解压根文件系统以后,就报警说硬盘不够.当初设置使用的大小为15G.不过扩展分区还是很方便的.当然首先你得设置添加使用的硬盘大小 ...
- Linux下的磁盘分区和逻辑卷
一.硬盘接口类型 硬盘的接口主要有IDE.SATA.SCSI .SAS和光纤通道等五种类型.其中IDE和SATA接口硬盘多用于家用产品中,也有部分应用于服务器,SATA是一种新生的硬盘接口类型,已经取 ...
- 启动VMware环境下的Linux操作系统,添加新分区
启动VMware环境下的Linux操作系统,添加新分区,需要root账号身份. 3.1 [fdisk -l] 最大分区为/dev/sda3,说明新创建的分区将会是sda4 3.2 输入[fdisk / ...
- Linux 硬盘格式化、分区、挂载、卸载、删除分区,Linux重新调整分区
目录 Linux 硬盘格式化.分区.挂载.卸载.删除分区 0. 查看挂载情况 1. 查看硬盘信息 2. 创建分区 3. 查看磁盘信息 4. 格式化分区 5. 将分区信息写入fstab, 设置开机自动挂 ...
- Linux之添加交换分区
Linux下的交换分区我们可以随意改变大小,如果说日常生活中分区不够用,今天我们来举个例子如何添加. 1.首先是使用dd命令创建一个空文件,这个空文件的大小就是你要继续添加的swap的大小,比如我这里 ...
- linux下硬盘的分区:
提到硬盘的分区,以前就是很乱,有什么主分区/扩展分区/逻辑分区等;它们有什么区别呢?现在简单的了解一下: 由于在MBR的主引导记录中的分区表里面最多只能记录4个分区记录,这个不够用啊,为了解决这个问题 ...
- Centos7不修改默认交换分区下添加交换分区
交换分区介绍 Linux系统中的交换分区是当物理内存(RAM)被充满时,作为物理内存的缓存来使用. 当系统需要更多的内存资源而物理内存已经充满,内存中不活跃的页就会被移动到交换分区上. 交换分区位于硬 ...
- Linux下的MBR分区
MBR分区 下面讲一讲如何给一块新添加入服务器的硬盘做MBR分区,那么为什么叫做MBR分区呢?后面会讲 做MBR分区,使用系统自带的fdisk工具.先看一看什么是fdisk,在命令行输入“fdisk” ...
- Linux下的GPT分区,使用parted命令
Linux下的GPT分区,这是另外一种分区,针对MBR分区,它有很多优点: (1)几乎突破了分区个数的限制. 在GPT分区表中最多可以支持128个主分区. (2)单个分区容量几乎没有限制. 单个分区最 ...
随机推荐
- 潭州课堂25班:Ph201805201 tornado 项目 第一课 项目介绍和创建 (课堂笔记)
tornado 相关说明 , 查找 python3 的路径: binbin@abc:~$ which python3/usr/bin/python3 创建虚拟环境 : 创建工程; 用 pycharm ...
- [HNOI2007]神奇游乐园
Description: 在方格图上找一条回路使经过的权值最小 Hint: \(n<=100,m<=6\) Solution: 一开始又看错题了...稍有细节的水题,详见代码 #inclu ...
- BZOJ3324 : [Scoi2013]火柴棍数字
为了使数字最大,首先要最大化其位数. 设$f[i][j][k]$表示从低到高考虑了$i$位,手头火柴棍个数为$j$,第$i$位是不是$0$时,最少移动多少根火柴. 若$f[i][0][非0]\leq ...
- 编程菜鸟的日记-初学尝试编程-C++ Primer Plus 第4章编程练习4
#include <iostream>#include <string>using namespace std;int main(){ string fname; string ...
- svn提交后 添加注释
svn 提交后添加注释 第一步: 第二步: 第三步:提交就可以了. 注意:如果svn服务器管理员没有激活pre-revprop-change这个hook,会出现 需要让svn服务器管理员没有激活pre ...
- Codeforces Round #539 (Div. 2)
Codeforces Round #539 (Div. 2) A - Sasha and His Trip #include<bits/stdc++.h> #include<iost ...
- django之模型层(model)--建表、查询、删除基础
要说一个项目最重要的部分是什么那铁定数据了,也就是数据库,这篇就开始带大家走进django关于模型层model的使用,model主要就是操纵数据库不使用sql语句的情况下完成数据库的增删改查.本篇仅带 ...
- Docker卸载高版本重装低版本后启动提示:driver not supported
解决方法: mv /var/lib/docker /var/lib/docker.old 其实就是docker镜像文件夹目录作怪,新版本的目录无法与旧版本目录相兼容. 不过建议降级的用户这样操作: y ...
- 搭建memcached使用:/usr/bin/phpize 安装memcached扩展的时候报错
Can't find PHP headers in /usr/include/phpThe php-devel package is required for use of this command ...
- SharePoint 读取内容的插件之SharepointPlus
前言 最近,一直在前端和SharePoint进行交互,然后,发现一个好用的插件,分享给大家. 首先,需要添加一个引用,如下图: 当然,我这里只是举个例子,亲们一定要去下载这个库,然后传到服务器或者文档 ...