国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快

国内连接maven官方的仓库更新依赖库，网速一般很慢，收集一些国内快速的maven仓库镜像以备用。

最新更新：2016年11月11日 18:05:40 阿里云提供Maven私服，我把配置文件贴一下，自己放在maven的conf下就行，setting.xml

https://github.com/ae6623/Zebra/blob/master/maven-repo-settings-ali.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--

Licensed to the Apache Software Foundation (ASF) under one

or more contributor license agreements.  See the NOTICE file

distributed with this work for additional information

regarding copyright ownership.  The ASF licenses this file

to you under the Apache License, Version 2.0 (the

"License"); you may not use this file except in compliance

with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,

software distributed under the License is distributed on an

"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

KIND, either express or implied.  See the License for the

specific language governing permissions and limitations

under the License.

-->

<!--

 | This is the configuration file for Maven. It can be specified at two levels:

 |

 |  1. User Level. This settings.xml file provides configuration for a single user,

 |                 and is normally provided in ${user.home}/.m2/settings.xml.

 |

 |                 NOTE: This location can be overridden with the CLI option:

 |

 |                 -s /path/to/user/settings.xml

 |

 |  2. Global Level. This settings.xml file provides configuration for all Maven

 |                 users on a machine (assuming they're all using the same Maven

 |                 installation). It's normally provided in

 |                 ${maven.home}/conf/settings.xml.

 |

 |                 NOTE: This location can be overridden with the CLI option:

 |

 |                 -gs /path/to/global/settings.xml

 |

 | The sections in this sample file are intended to give you a running start at

 | getting the most out of your Maven installation. Where appropriate, the default

 | values (values used when the setting is not specified) are provided.

 |

 |-->

<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"

          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"

          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">

  <!-- localRepository

   | The path to the local repository maven will use to store artifacts.

   |

   | Default: ${user.home}/.m2/repository

  <localRepository>/path/to/local/repo</localRepository>

  -->

  <localRepository>D:\Repositories\Maven</localRepository>

  <!-- interactiveMode

   | This will determine whether maven prompts you when it needs input. If set to false,

   | maven will use a sensible default value, perhaps based on some other setting, for

   | the parameter in question.

   |

   | Default: true

  <interactiveMode>true</interactiveMode>

  -->

  <!-- offline

   | Determines whether maven should attempt to connect to the network when executing a build.

   | This will have an effect on artifact downloads, artifact deployment, and others.

   |

   | Default: false

  <offline>false</offline>

  -->

  <!-- pluginGroups

   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.

   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers

   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.

   |-->

  <pluginGroups>

    <!-- pluginGroup

     | Specifies a further group identifier to use for plugin lookup.

    <pluginGroup>com.your.plugins</pluginGroup>

    -->

    <pluginGroup>org.mortbay.jetty</pluginGroup>

  </pluginGroups>

  <!-- proxies

   | This is a list of proxies which can be used on this machine to connect to the network.

   | Unless otherwise specified (by system property or command-line switch), the first proxy

   | specification in this list marked as active will be used.

   |-->

  <proxies>

    <!-- proxy

     | Specification for one proxy, to be used in connecting to the network.

     |

    <proxy>

      <id>optional</id>

      <active>true</active>

      <protocol>http</protocol>

      <username>proxyuser</username>

      <password>proxypass</password>

      <host>proxy.host.net</host>

      <port>80</port>

      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>

    </proxy>

    -->

  </proxies>

  <!-- servers

   | This is a list of authentication profiles, keyed by the server-id used within the system.

   | Authentication profiles can be used whenever maven must make a connection to a remote server.

   |-->

  <servers>

    <!-- server

     | Specifies the authentication information to use when connecting to a particular server, identified by

     | a unique name within the system (referred to by the 'id' attribute below).

     |

     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are

     |       used together.

     |

    <server>

      <id>deploymentRepo</id>

      <username>repouser</username>

      <password>repopwd</password>

    </server>

    -->

    <!-- Another sample, using keys to authenticate.

    <server>

      <id>siteServer</id>

      <privateKey>/path/to/private/key</privateKey>

      <passphrase>optional; leave empty if not used.</passphrase>

    </server>

    -->

    <server>

        <id>releases</id>

        <username>ali</username>

        <password>ali</password>

      </server>

      <server>

        <id>Snapshots</id>

        <username>ali</username>

        <password>ali</password>

      </server>

  </servers>

  <!-- mirrors

   | This is a list of mirrors to be used in downloading artifacts from remote repositories.

   |

   | It works like this: a POM may declare a repository to use in resolving certain artifacts.

   | However, this repository may have problems with heavy traffic at times, so people have mirrored

   | it to several places.

   |

   | That repository definition will have a unique id, so we can create a mirror reference for that

   | repository, to be used as an alternate download site. The mirror site will be the preferred

   | server for that repository.

   |-->

  <mirrors>

    <!-- mirror

     | Specifies a repository mirror site to use instead of a given repository. The repository that

     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used

     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.

     |

    <mirror>

      <id>mirrorId</id>

      <mirrorOf>repositoryId</mirrorOf>

      <name>Human Readable Name for this Mirror.</name>

      <url>http://my.repository.com/repo/path</url>

    </mirror>

     -->

    <mirror>

      <!--This sends everything else to /public -->

      <id>nexus</id>

      <mirrorOf>*</mirrorOf>

      <url>http://maven.aliyun.com/nexus/content/groups/public/</url>

    </mirror>

    <mirror>

      <!--This is used to direct the public snapshots repo in the

          profile below over to a different nexus group -->

      <id>nexus-public-snapshots</id>

      <mirrorOf>public-snapshots</mirrorOf>

      <url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>

    </mirror>

  </mirrors>

  <!-- profiles

   | This is a list of profiles which can be activated in a variety of ways, and which can modify

   | the build process. Profiles provided in the settings.xml are intended to provide local machine-

   | specific paths and repository locations which allow the build to work in the local environment.

   |

   | For example, if you have an integration testing plugin - like cactus - that needs to know where

   | your Tomcat instance is installed, you can provide a variable here such that the variable is

   | dereferenced during the build process to configure the cactus plugin.

   |

   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles

   | section of this document (settings.xml) - will be discussed later. Another way essentially

   | relies on the detection of a system property, either matching a particular value for the property,

   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a

   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.

   | Finally, the list of active profiles can be specified directly from the command line.

   |

   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact

   |       repositories, plugin repositories, and free-form properties to be used as configuration

   |       variables for plugins in the POM.

   |

   |-->

  <profiles>

    <profile>

      <id>development</id>

      <repositories>

        <repository>

          <id>central</id>

          <url>http://central</url>

          <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>

          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>

        </repository>

      </repositories>

     <pluginRepositories>

        <pluginRepository>

          <id>central</id>

          <url>http://central</url>

          <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>

          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>

        </pluginRepository>

      </pluginRepositories>

    </profile>

    <profile>

      <!--this profile will allow snapshots to be searched when activated-->

      <id>public-snapshots</id>

      <repositories>

        <repository>

          <id>public-snapshots</id>

          <url>http://public-snapshots</url>

          <releases><enabled>false</enabled></releases>

          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>

        </repository>

      </repositories>

     <pluginRepositories>

        <pluginRepository>

          <id>public-snapshots</id>

          <url>http://public-snapshots</url>

          <releases><enabled>false</enabled></releases>

          <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>

        </pluginRepository>

      </pluginRepositories>

    </profile>

  </profiles>

   <activeProfiles>

    <activeProfile>development</activeProfile>

    <activeProfile>public-snapshots</activeProfile>

   </activeProfiles>

</settings>

收集的仓库如下:

#收集的比较快的maven仓库

http://maven.wso2.org/nexus/content/groups/public/

http://jcenter.bintray.com/

http://maven.antelink.com/content/repositories/central/

http://nexus.openkoala.org/nexus/content/groups/Koala-release/

http://maven.tmatesoft.com/content/groups/public/

http://mavensync.zkoss.org/maven2/

http://maven.springframework.org/release/

<mirror>

    <id>UK</id>

    <name>UK Central</name>

    <url>http://uk.maven.org/maven2</url>

    <mirrorOf>central</mirrorOf>

</mirror>

<mirror>

    <id>sonatype</id>

    <name>sonatype Central</name>

    <url>http://repository.sonatype.org/content/groups/public/</url>

    <mirrorOf>central</mirrorOf>

</mirror>

<mirror>

    <id>jboss-public-repository-group</id>

    <name>JBoss Public Repository Group</name>

    <url>http://repository.jboss.org/nexus/content/groups/public</url>

    <mirrorOf>central</mirrorOf>

</mirror>

2016年11月20日16:38:27

www.js-dev.cn

@落雨

分类: Maven

好文要顶关注我收藏该文

_落雨
关注 - 38
粉丝 - 72

+加关注

«上一篇：Eclipse插件开发 swt ComboBoxCellEditor CCombo 下拉框高度
»下一篇：主页被改为毒霸/搜狗的解决办法

posted @ 2014-12-30 09:06 _落雨阅读(70427) 评论(2) 编辑收藏

评论列表

回复引用

#1楼 2017-06-27 21:09 习惯沉淀

终于找到了个靠谱的~~~3Q

支持(0)反对(0)

回复引用

#2楼 2018-05-13 22:50 euler

阿里 maven 3Q!!!

支持(0)反对(0)

刷新评论刷新页面返回顶部

发表评论

昵称：

评论内容：

退出订阅评论

[Ctrl+Enter快捷键提交]

公告

昵称：_落雨
园龄：8年1个月
粉丝：72
关注：38

+加关注

搜索

随笔分类(298)

阅读排行榜

maven settings 设置的更多相关文章

Maven settings.xml配置(指定本地仓库、阿里云镜像设置)
转: 详解Maven settings.xml配置(指定本地仓库.阿里云镜像设置) 更新时间:2018年12月18日 11:14:45 作者:AmaniZ 我要评论一.settings. ...
（二）初探Maven之设置代理和阿里云镜像
引言: 在许多公司,可能因为安全性的要求配置了代理服务器,用户无法直接访问外网,所以在项目中使用Maven必须设置好代理才能下载依赖. 并且直接从中央仓库下载依 ...
IntelliJ IDEA 默认需要进行maven的设置
IntelliJ IDEA 默认需要进行maven的设置需要指定maven的地址,指定settings.xml的地址: 可以默认的在user/.m2/下面放一个settings.xml文件: 学习: ...
在Maven中设置Nexus私有服务为中央工厂
在Maven中设置Nexus私有服务为中央工厂(repository) 2015-12-12 17:45 168人阅读评论(0) 收藏举报分类: Maven(17) 版权声明:本文为博主原创 ...
maven settings 配置文件
maven settings 配置文件 <?xml version="1.0" encoding="UTF-8"?> <settings xm ...
Jenkins Maven安装设置
Jenkins Maven安装设置如果没有学习过 Maven 的朋友,可以先了解 Maven教程,然后再进一步学习本教程文章. 第1步:下载和设置Maven Maven的官方网站就是Apache M ...
maven settings
maven settings 私有服settigs <?xml version="1.0" encoding="UTF-8"?> <setti ...
【Django笔记0】-Django项目创建，settings设置，运行
Django项目创建,settings设置,运行 1,项目创建通过pip下载Django以后,在cmd中cd到想要创建项目的路径,之后输入: django-admin startproject ...
基于nexus私服配置项目pom.xml和maven settings.xml文件
备注:搭建nexus私服请参考上一篇文章基于Docker搭建Maven私服Nexus,Nexus详解一:将jar发送到nexus私服务器 1.pom.xml文件添加配置 pom.xml文件中的这个版 ...

随机推荐

《Python编程从入门到实践》_第八章_函数
一个简单的函数先看一个简单的函数 def say_hello(): '''打印hello''' print("Hello!") say_hello() #运行结果 Hello! ...
强哥的分享--如何使用Spring Boot做一个邮件系统
http://springboot.fun/ actuator是单机.集群环境下要使用Spring Boot Admin将各个单机的actuator集成越来 mvn clean package -Dm ...
深入理解JavaScript系列（21）：S.O.L.I.D五大原则之接口隔离原则ISP
前言本章我们要讲解的是S.O.L.I.D五大原则JavaScript语言实现的第4篇,接口隔离原则ISP(The Interface Segregation Principle). 英文原文:htt ...
项目视图 Project Browser
项目视图在这个视图,你可以访问.管理你当前项目资源. 项目视图左侧面板显示项目的文件夹结构的分层列表,当从列表中单击一个文件夹,其内容会显示在面板的右边.你可以点击小三角展开或折叠文件夹,显示他包含 ...
java输出九九乘法口诀表
使用双重for循环输出九九乘法口诀表 public static void main(String[] args){ formula();} /** * for 循环实现9*9乘法口诀表 * &quo ...
Java中Date()类日期转字符串、字符串转日期的问题（已解决）
Java中Date()类日期转字符串.字符串转日期的问题今天在写东西的时候突然发现一个问题,就是先new 一个Date()然后将生成的值转为字符串, 然后再将转换后的字符串再次用new Date( ...
转：ArcGIS提取面状道路中心线（转载）
1.首先把所有的面要素merge成一个要素 2.把merge后的数据转成线数据 3.此时转换后的线数据一定是闭合的,为了防止提取中心线失败(只提取出外围轮廓)我们在随意一个道路末端使用打断工具打一个开 ...
SmartUpload控件中文乱码问题解决办法
(乱码一般是三码不统一,但是当我们使用插件的时候,我们页面,后台,还有插件之间的转码不一定统一,导致了乱码这一问题) 首先,SmartUpload 的使用网上多的很,在这里就不在赘述,主要解决为什么乱 ...
Js 对象数组，转化为字符串
var str = [{"cuid":"23910","content":"是","type":&q ...
mysql：删除表数据drop、truncate和delete的用法
程度从强到弱 1.drop table tb drop将表格直接删除,没有办法找回 2.truncate (table) tb 删除表中的所有数据,不能与where一起使用 ...

maven settings 设置

国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快

公告

搜索

最新随笔

随笔分类(298)

最新评论

阅读排行榜

maven settings 设置的更多相关文章

随机推荐

热门专题