MAGENTO for XAMPP install config -搬家配置与安装配置

MEGENTO . 2.2.3 . 支持 PHP version is 7.0.2|7.0.4|~7.0.6|~7.1.0

虚拟机主机配置
环境扩展配置
其他错误

httpd-conf —— xuying.conf（个人习惯：可以参考本文下方的配置加入虚拟主主机配置）

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/trunk/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/trunk/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so 'log/access_log'

# with ServerRoot set to '/www' will be interpreted by the

# server as '/www/log/access_log', where as '/log/access_log' will be

# interpreted as '/log/access_log'.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used.  If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

#

ServerRoot "/Applications/XAMPP/xamppfiles"

#

# Mutex: Allows you to set the mutex mechanism and mutex file directory

# for individual mutexes, or change the global defaults

#

# Uncomment and change the directory if mutexes are file-based and the default

# mutex file directory is not on a local disk or is not appropriate for some

# other reason.

#

# Mutex default:logs

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:

Listen

Listen

Listen

Listen

Listen

Listen

Listen

Listen 

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule authn_file_module modules/mod_authn_file.so

LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_anon_module modules/mod_authn_anon.so

LoadModule authn_dbd_module modules/mod_authn_dbd.so

LoadModule authn_socache_module modules/mod_authn_socache.so

LoadModule authn_core_module modules/mod_authn_core.so

LoadModule authz_host_module modules/mod_authz_host.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_dbd_module modules/mod_authz_dbd.so

LoadModule authz_core_module modules/mod_authz_core.so

LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

LoadModule access_compat_module modules/mod_access_compat.so

LoadModule auth_basic_module modules/mod_auth_basic.so

LoadModule auth_form_module modules/mod_auth_form.so

LoadModule auth_digest_module modules/mod_auth_digest.so

LoadModule allowmethods_module modules/mod_allowmethods.so

LoadModule file_cache_module modules/mod_file_cache.so

LoadModule cache_module modules/mod_cache.so

LoadModule cache_disk_module modules/mod_cache_disk.so

LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

LoadModule socache_dbm_module modules/mod_socache_dbm.so

LoadModule socache_memcache_module modules/mod_socache_memcache.so

LoadModule dbd_module modules/mod_dbd.so

LoadModule bucketeer_module modules/mod_bucketeer.so

LoadModule dumpio_module modules/mod_dumpio.so

LoadModule echo_module modules/mod_echo.so

LoadModule case_filter_module modules/mod_case_filter.so

LoadModule case_filter_in_module modules/mod_case_filter_in.so

LoadModule buffer_module modules/mod_buffer.so

LoadModule ratelimit_module modules/mod_ratelimit.so

LoadModule reqtimeout_module modules/mod_reqtimeout.so

LoadModule ext_filter_module modules/mod_ext_filter.so

LoadModule request_module modules/mod_request.so

LoadModule include_module modules/mod_include.so

LoadModule filter_module modules/mod_filter.so

LoadModule substitute_module modules/mod_substitute.so

LoadModule sed_module modules/mod_sed.so

LoadModule charset_lite_module modules/mod_charset_lite.so

LoadModule deflate_module modules/mod_deflate.so

LoadModule mime_module modules/mod_mime.so

LoadModule ldap_module modules/mod_ldap.so

LoadModule log_config_module modules/mod_log_config.so

LoadModule log_debug_module modules/mod_log_debug.so

LoadModule logio_module modules/mod_logio.so

LoadModule env_module modules/mod_env.so

LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule expires_module modules/mod_expires.so

LoadModule headers_module modules/mod_headers.so

LoadModule usertrack_module modules/mod_usertrack.so

LoadModule unique_id_module modules/mod_unique_id.so

LoadModule setenvif_module modules/mod_setenvif.so

LoadModule version_module modules/mod_version.so

LoadModule remoteip_module modules/mod_remoteip.so

LoadModule proxy_module modules/mod_proxy.so

LoadModule proxy_connect_module modules/mod_proxy_connect.so

LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

LoadModule proxy_http_module modules/mod_proxy_http.so

LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

LoadModule proxy_express_module modules/mod_proxy_express.so

LoadModule session_module modules/mod_session.so

LoadModule session_cookie_module modules/mod_session_cookie.so

LoadModule session_dbd_module modules/mod_session_dbd.so

LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

LoadModule ssl_module modules/mod_ssl.so

LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

LoadModule unixd_module modules/mod_unixd.so

LoadModule dav_module modules/mod_dav.so

LoadModule status_module modules/mod_status.so

LoadModule autoindex_module modules/mod_autoindex.so

LoadModule info_module modules/mod_info.so

LoadModule suexec_module modules/mod_suexec.so

LoadModule cgi_module modules/mod_cgi.so

LoadModule cgid_module modules/mod_cgid.so

LoadModule dav_fs_module modules/mod_dav_fs.so

LoadModule vhost_alias_module modules/mod_vhost_alias.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule dir_module modules/mod_dir.so

LoadModule actions_module modules/mod_actions.so

LoadModule speling_module modules/mod_speling.so

LoadModule userdir_module modules/mod_userdir.so

LoadModule alias_module modules/mod_alias.so

LoadModule rewrite_module modules/mod_rewrite.so

<IfDefine JUSTTOMAKEAPXSHAPPY>

LoadModule php4_module        modules/libphp4.so

LoadModule php5_module        modules/libphp5.so

</IfDefine>

<IfModule unixd_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User xuying

Group daemon

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin you@example.com

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

#ServerName www.example.com:@@Port@@

# XAMPP

ServerName localhost

#

# Deny access to the entirety of your server's filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

#

<Directory />

    AllowOverride none

    Require all denied

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/Applications/XAMPP/xamppfiles/htdocs"

<Directory "/Applications/XAMPP/xamppfiles/htdocs">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/trunk/mod/core.html#options

    # for more information.

    #

    #Options Indexes FollowSymLinks

    # XAMPP

    Options Indexes FollowSymLinks ExecCGI Includes

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    #AllowOverride None

    # since XAMPP 1.4:

    AllowOverride All

    #

    # Controls who can get stuff from this server.

    #

    Require all granted

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    #DirectoryIndex index.html

    # XAMPP

    DirectoryIndex index.html index.html.var index.php index.php3 index.php4

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<Files ".ht*">

    Require all denied

</Files>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error_log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    CustomLog "logs/access_log" common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog "logs/access_log" combined

</IfModule>

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "/Applications/XAMPP/xamppfiles/cgi-bin/"

</IfModule>

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock logs/cgisock

</IfModule>

#

# "/Applications/XAMPP/xamppfiles/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "/Applications/XAMPP/xamppfiles/cgi-bin">

    AllowOverride None

    Options None

    Require all granted

</Directory>

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig etc/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    #AddHandler cgi-script .cgi

    # XAMPP, since LAMPP 0.9.:

    AddHandler cgi-script .cgi .pl

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    # XAMPP

    AddType text/html .shtml

    AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile etc/magic

#

# Customizable error responses come in three flavors:

# ) plain text ) local redirects ) external redirects

#

# Some examples:

#ErrorDocument  "The server made a boo boo."

#ErrorDocument  /missing.html

#ErrorDocument  "/cgi-bin/missing_handler.pl"

#ErrorDocument  http://www.example.com/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or one of the special

# values 'default', 'none' or 'unlimited'.

# Default setting is to accept  Ranges.

#MaxRanges unlimited

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults: EnableMMAP On, EnableSendfile Off

#

EnableMMAP off

EnableSendfile off

# Supplemental configuration

#

# The configuration files in the etc/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

#Include etc/extra/httpd-mpm.conf

# Multi-language error messages

Include etc/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

Include etc/extra/httpd-autoindex.conf

# Language settings

#Include etc/extra/httpd-languages.conf

# User home directories

#Include etc/extra/httpd-userdir.conf

# Real-time info on requests and configuration

#Include etc/extra/httpd-info.conf

# Virtual hosts

#Include etc/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include etc/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include etc/extra/httpd-dav.conf

# Various default settings

Include etc/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1

<IfModule proxy_html_module>

Include etc/extra/proxy-html.conf

</IfModule>

# Secure (SSL/TLS) connections

<IfModule ssl_module>

# XAMPP

<IfDefine SSL>

Include etc/extra/httpd-ssl.conf

</IfDefine>

</IfModule>

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

# XAMPP

Include etc/extra/httpd-xampp.conf

Include etc/extra/xuying.conf

Include "/Applications/XAMPP/xamppfiles/apache2/conf/httpd.conf"

PECL:

php 扩展下载

cd php-x.x.x/ext/xxx

_______________________

phpize

./configure -with-php-config=/Applications/XAMPP/xamppfiles/bin/php-config

sudo make

sudo make install

PHP.INI

memory_limit = 756M

max_execution_time = 18000

session.auto_start = off

suhosin.session.cryptua = off

INSTALL OVER END ...

ERROR:

An error has happened during application run. See exception log for details
```
// go to 根目录 修改 .htaccess 文件。打开注释

SetEnv MAGE_MODE developer
```
如果不能解决问题：请开启错误提示——

命令行开启开发者模式：（推荐）
```
sudo php bin/magento deploy:mode:set developer
```

开启错误提示：

# 打开 根目录 

cp pub/errors/local.xml.sample pub/errors/local.xml

开启用户目录访问权限：

#filename 为文件目录
#-R 递归开启
# www 为apache 可操作的用户与用户组
sudo chown -R www:www __filename__

开启文件缓存目录权限：如果还有权限问题，开发模式可以全目录777；
```
sudo chmod -R 777  var
```

Magento\Framework\Exception\NoSuchEntityException: No such entity.

SET FOREIGN_KEY_CHECKS=0;

UPDATE mgyb_store SET store_id = 0 WHERE code='admin';

UPDATE `mgyb_store_group` SET group_id = 0 WHERE name='Default';

UPDATE mgyb_store_website SET website_id = 0 WHERE code='admin';

UPDATE mgyb_customer_group SET customer_group_id = 0 WHERE customer_group_code='NOT LOGGED IN';

SET FOREIGN_KEY_CHECKS=1;

SQLSTATE[HY000] [2002] No such file or directory

// 解决方法1：找到相应的.sock文件，并设置php.ini文件中的 pdo_mysql.default_socket的值为.sock文件的路径。由于环境不同，一般在 my.cnf 数据库文件获得具体路径。 

pdo_mysql.default_socket= /tmp/mysqld.sock
 

/*然后重启Apache，或者nginx下重启php-fpm即可。*/

//解决方法2：（我是用这种方法解决，简单省力）修改 PDO连接

/*就是把连接数据库配置文件的 “localhost”改为“127.0.0.1”即可。*/

当安装完成，发生，样式错误，页面跳转404 一般是没有执行 .htaccess文件，需要在apache配置：

##########==============  APACHE MOD  =================
<VirtualHost *:888>

    ServerAdmin webmaster@dummy-host.example.com

    DocumentRoot "/Users/xuying/Public/wwwroot/Magento-CE-2.2.3_sample_data-2018-02-23-11-28-28"

    #ServerName dummy-host.example.com

    #ServerAlias www.dummy-host.example.com

    ErrorLog "logs/localhost888-error_log"

    CustomLog "logs/localhost888-access_log" common

    <Directory "/Users/xuying/Public/wwwroot/Magento-CE-2.2.3_sample_data-2018-02-23-11-28-28">

         Options FollowSymLinks Indexes MultiViews

               AllowOverride None

               Order allow,deny

               Allow from all

               Require all granted

    ##### ============  ADD 添加如下 ==========

	       Options FollowSymLinks

               AllowOverride All

    ##### ============== 添加如上 =========

    </Directory>

</VirtualHost>

切换数据库后，后台无法登陆；其中原因是cookie数据库缓存；使用数据库查询：select * from core_config_data where path like 'web/cookie%'; 查看其中的 web/cookie/cookie_domain 的 value 为更改后的域名“.m223:8890”（magento 2.2.3前面需要加个点）。
bin/magento config:set web/cookie/cookie_domain xxxx.com。
切换数据库后，如主题已经不再用提示错误：Required parameter 'theme_dir' was not passed 。
a,转到 theme 表，然后删除创建的主题的条目。
b,转到您的core_config_data表并搜索 theme ，您将获得路径记录，把 design/theme/theme_id，替换其中的 theme 表主题ID。
MAGENTO 2主题不显示在前端时该怎么办？
a, 第一步：检测主题是/否添加 “Theme” 表中；
b, 第二步：找到该行，更新该列 Type 属性从 1 改为 0；
c, 第三步：php bin/magento setup:upgrade --keep-generated && php bin/magento setup:static-content:deploy -f && php bin/magento cache:clean && php bin/magento cache:flush
s

MAGENTO for XAMPP install config -搬家配置与安装配置的更多相关文章

ogre3d环境配置 SDK安装配置及简单事例教程
ogre3d环境配置 SDK安装配置及简单事例教程 http://www.cr173.com/html/22594_1.html ogre3d环境配置 SDK安装配置及简单事例教程 http://ww ...
DNS配置-BIND安装配置全过程
下载地址:ftp://ftp.isc.org/isc/ 下载bind,我下载的是bind-9.11.13.tar.gz 我下载的文件放在/root目录下进入目录解压缩 [root@localhost ...
Hadoop开发环境配置1-maven安装配置
1.下载maven安装包:apache-maven-3.3.9-bin.zip 下载地址: http://archive.apache.org/dist/maven/maven-3/3.3.9/bin ...
chrome开发配置(一)安装配置工具
1.下载depot_tools,解压到本地,然后将解压后的depot_tools根目录添加到path环境变量: depot_tools下载地址 2.cmd 运行gclient,git比较大,有100M ...
高可用,完全分布式Hadoop集群HDFS和MapReduce安装配置指南
原文:http://my.oschina.net/wstone/blog/365010#OSC_h3_13 (WJW)高可用,完全分布式Hadoop集群HDFS和MapReduce安装配置指南 [X] ...
Django Nginx+uwsgi 安装配置
使用 python manage.py runserver 来运行服务器.这只适用测试环境中使用. 正式发布的服务,我们需要一个可以稳定而持续的服务器,比如apache, Nginx, lighttp ...
OpenCV安装配置的简单记录
在ubuntu16.04下安装OpenCV 2.4.11的简单记录 1. 安装cmake,执行$apt-get install cmake即可,cmake -version验证 2. 下载OpenCV ...
Resin4安装配置
#Resin4安装配置 # Resin4安装配置 #centos6 #参考http://467754239.blog.51cto.com/4878013/1558435 #yum -y install ...
emacs之配置自动安装脚本
emacsConfig下建立install目录,结构大概这样 . ├── auto-complete-etags-setting.el ├── auto-complete-setting.el ├── ...

随机推荐

Android远程桌面助手扩展之微信跳一跳辅助
微信跳一跳的外挂辅助已是五花八门,万能的TB上也有了各种明码标价的代练.微信小程序游戏的火爆甚至带火了手游外挂产业.另一方面,跳一跳游戏也在不断更新,防止使用外挂刷高分.Android远程桌面助手支持 ...
SQL Server GUID 数据迁移至MongoDB后怎样查看？
关键字:SQL Server NEWID():BSON:MongoDB UUID 1.遇到的问题和困惑 SQL Server中的NEWID数据存储到MongoDB中会是什么样子呢?发现不能简单的通过此 ...
c/c++ 多线程绕过mutex的保护
多线程绕过mutex的保护 mutex,能够解决线程安全的问题,但它不是万能的.下面的例子虽然使用了mutex,但是恶意注入了一个外部函数,导致把被mutex保护的双向链表,让一个外部的指针指向了, ...
索引-mysql
什么是索引索引的四大作用 (参考百度百科:百度百科-索引) 索引的优缺点索引分类什么地方需要建索引索引优化什么是索引? 宏观来说,索引是一种检索工具,目录也是一种检索工具,但是两者是有区是别 ...
超哥笔记 --nginx入门(6)
一 NGINX 1 nignx是什么 nginx是一个开源的支持高性能,高并发的web服务和代理服务软件. nginx比他大哥apache性能改进许多,nginx占用的系统资源更少,支持高并发连接,有 ...
Git命令行管理代码、安装及使用
出处:https://www.cnblogs.com/ximiaomiao/p/7140456.html Git安装和使用目的:通过Git管理github托管项目代码一.下载安装Git 1 ...
python Socket socketserver
Socket 套接字 socket的类型实现socket对象时传入到socket 类中 socket.AF_INET 服务器间的通讯 IPv4 socket.AF_INET6 IPv6 sock ...
Java并发-AQS及各种Lock锁的原理
原文 : https://blog.csdn.net/zhangdong2012/article/details/79983404
虚拟DOM和react中的diff算法总结
https://blog.csdn.net/qq_26708777/article/details/78107577 一.虚拟DOM 1.什么是虚拟DOM及原理把真实DOM树,变成js ...
Windows10下安装Oracle 11g 64位的详细步骤
直接附上我整理后的Word版<Windows10下安装Oracle 11g 64位的详细步骤>下载地址,提取码:9vak. 参考文献: 1.Win10 64位系统下安装Oracle11g详 ...

MAGENTO for XAMPP install config -搬家配置与安装配置

An error has happened during application run. See exception log for details

MAGENTO for XAMPP install config -搬家配置与安装配置的更多相关文章

随机推荐

热门专题