ftp搭建记录
1.安装vsftpd的rpm包
rpm -ivh vsftpd-2.0.5-16.el5_4.1.i386.rpm
使用YUM命令安装
yum install vsftpd -y。
2.ftp命令
service vsftpd start
service vsftpd stop
service vsftpd restar
rpm -qa |grep vsftp -----查看版本
rpm -e 版本名称 ----卸载命令
3.ftp配置
/etc/vsftpd/vsftpd.conf
/etc/vsftpd/user_list
/etc/vsftpd/ftpusers
ftpusers 该文件用来指定那些用户不能访问ftp服务器。
user_list 该文件用来指示的默认账户在默认情况下也不能访问ftp
vsftpd.conf vsftpd的主配置文件
4.ftp相关配置参数
内容(根据自身情况使用):
anonymous_enable=NO #不允许匿名用户登陆
local_enable=YES #vsftpd所在系统的用户可以登录
vsftpd
write_enable=YES #允许使用任何可以修改文件系统的FTP的指令
local_umask=002 #匿名用户新增文件的umask数值
anon_upload_enable=NO #匿名用户不可以上传文件
anon_mkdir_write_enable=NO #匿名用户不可以修改文件
xferlog_enable=YES #启用一个日志文件,用于详细记录上传和下载。
use_localtime=YES #使用本地时间而不是
GMT
vsftpd_log_file=/var/log/vsftpd.log #vsftpd日志存放位置
dual_log_enable=YES #用户登陆日志
connect_from_port_20=YES #开启20端口
xferlog_file=/var/log/xferlog #记录上传下载文件的日志
xferlog_std_format=YES #记录日志使用标准格式
idle_session_timeout=600 #登陆之后超时时间60秒,登陆之后,一分钟不操作,就会断开连接。
chroot_local_user=YES #用于指定用户列表文件中的用户,是否允许切换到上级目录
listen=YES #开启监听
pam_service_name=vsftpd.vu #验证文件的名字
userlist_enable=YES #允许由userlist_file指定文件中的用户登录FTP服务器
tcp_wrappers=YES #支持tcp_wrappers,限制访问(/etc/hosts.allow,/etc/hosts.deny)
guest_enable=YES #起用虚拟用户
guest_username=taokey #虚拟用户名
#user_config_dir=/etc/vsftpd/vsftpuser #虚拟用户配置文件路径
local_root=/usr/local/ftpFiles #自定义ftp上传路径(注意文件夹权限)
pasv_min_port=35000
pasv_max_port=45000
pasv_enable=YES
pasv_promiscuous=YES
anon_other_write_enable=YES
更具需要修改对应的值关闭并保存配置文件,重启vsftpd服务。
5.vsftpd.conf文件
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf. for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf. manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is . You may wish to change this to ,
# if your users expect that ( is used by most other ftpd's)
local_umask=
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=hf
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/xferlog
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode. The vsftpd.conf() man page explains
# the behaviour when these options are disabled.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. Ifroot_list_enablechroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
# Make sure, that one of the listen options is commented !!
listen_ipv6=YES pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
local_root=/home/hf1/
chroot_local_user=YES
anon_root=/home/hf2/
6.新建用户和密码
useradd testuser 创建用户testuser
passwd testuser 给已创建的用户testuser设置密码
7.新建chroot_list文件
[root@gytest02 vsftpd]# cd /etc/vsftpd/
mkdir chroot_list
在chroot_list中添加用户
8.测试
ftp://192.168.0.225/
ftp搭建记录的更多相关文章
- FTP 搭建
FTP 搭建 FTP 是 File Transfer Protocol(文件传输协议)的英文简称,它工作在 0SI 模型的第七层,TCP 模型的第四屋上,即应用层. 一.FTP 简介 FTP 会话时包 ...
- faster-rcnn(testing): ubuntu14.04+caffe+cuda7.5+cudnn5.1.3+opencv3.0+matlabR2014a环境搭建记录
python版本的faster-rcnn见我的另一篇博客: py-faster-rcnn(running the demo): ubuntu14.04+caffe+cuda7.5+cudnn5.1.3 ...
- py-faster-rcnn(running the demo): ubuntu14.04+caffe+cuda7.5+cudnn5.1.3+python2.7环境搭建记录
第一次写博客,以此纪念这几天安装caffe,跑faster-rcnn的血泪史.在此特别感谢网络各路大神,来自全球各地,让我能从中汲取营养,吸取经验,总结规律. faster-rcnn分为matlab版 ...
- 生产apollo搭建记录(五)
1. 生产apollo搭建记录(五) 1.1. 目标 搭建两个环境配置,dev和pro,但目前可用服务器限制,打算mysql用同一个,服务器分生产和测试 1.2. 数据库 建三个库 注意注意:在启 ...
- Xlight FTP搭建FTP服务器教程
Xlight FTP搭建FTP服务器教程 1. 服务器公共设置 设置FTP 端口, ip 等 FTP 服务器公共的设定 2. 设定 FTP 用户, FTP 目录 等信息 备注: 这个用户是非Wi ...
- 12.2RAC搭建记录
12.2RAC环境搭建记录 安装前资源检查 资源限制要求/etc/security/limits.conf Table 6-1 Installation Owner Resource Limit Re ...
- RobotFramework测试环境搭建记录
Robotframwork测试环境搭建记录 1.安装Python2.7(https://www.python.org/) 在环境变量path中加入“C:\Python27” 安装后的验证方法为在命令行 ...
- (转载)PHP环境搭建-记录
PHP环境搭建-记录 转于 http://jingyan.baidu.com/article/fcb5aff797ec41edaa4a71c4.html php5.5 做了大量的更新,在与apac ...
- linux私有ftp搭建与创建新用户
一.私有ftp搭建 以后补充 1. 搭建 2.修改配置文件 二.创建新用户 在linux搭建好私有ftp后,默认存放目录是 /var/ftp/ 我们有时候需要给外部公司之类的用,但又不想让他们直接在 ...
随机推荐
- REINDEX - 重建索引
SYNOPSIS REINDEX { DATABASE | TABLE | INDEX } name [ FORCE ] DESCRIPTION 描述 REINDEX 基于存储在表上的数据重建索引, ...
- 条款2:尽量使用const ,enum,inline替换define
宁可使用编译器而不用预处理器 假设我们使用预处理器: #define ABC 1.56 这标识符ABC也许编译器没看到,也许它在编译器处理源码前就被预处理器移走了,于是“标识符”ABC没有进入标识符列 ...
- 洛谷3321 SDOI2015 序列统计
懒得放传送[大雾 有趣的一道题 前几天刚好听到Creed_神犇讲到相乘转原根变成卷积的形式 看到这道题当然就会做了啊w 对于m很小 我们暴力找原根 如果你不会找原根的话 出门左转百度qwq 找到原根以 ...
- SOA架构是什么?
https://blog.csdn.net/u013343616/article/details/79460398 SOA是什么?SOA全英文是Service-Oriented Architectur ...
- Arrays.asList()报错java.lang.UnsupportedOperationException
问题: 使用工具类Arrays.asList()方法把数组转换成集合时,不能使用修改集合相关的方法,比如add,remove.这个ArrayList是Arrays类自己定义的一个内部类!这个内部类没有 ...
- 51nod 1298:圆与三角形(计算几何)
题目链接 判断圆和三角形是否相交 可以转化为 判断三条线段是否和圆相交 #include<iostream> #include<cstdio> #include< ...
- boost container
Boost Container provides additional advantages: (1) The interface of the containers resemble those o ...
- 输入流之顶层抽象InputStream
该类是所有二进制输入流的的抽象父类 类中主要方法解释说明如下 (1)public abstract int read() throws IOException; 该方法是从输入流中读取下一个字节,返回 ...
- DM9000网卡驱动深度分析
一.dm9000_porbe函数分析 不同于u-boot代码,tq2440中的DM9000更加复杂,需要分析的点也很多: /* * Search DM9000 board, allocate spac ...
- JS中arguments对象
与其他程序设计语言不同,ECMAScript 不会验证传递给函数的参数个数是否等于函数定义的参数个数. 开发者定义的函数都可以接受任意个数的参数而无需跟定义的函数相匹配(根据 Netscape 的文档 ...