【iCore1S 双核心板_ARM】例程十一：RTC实时时钟实验——显示时间和日期

实验现象：

核心代码：

int main(void)
{

  /* USER CODE BEGIN 1 */
        RTC_DateTypeDef sDate;
        RTC_TimeTypeDef sTime;
        uint8_t second_tmp = ;
  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* Configure the system clock */
  SystemClock_Config();

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_RTC_Init();
  MX_USART1_UART_Init();
  SystemClock_Config();

  /* USER CODE BEGIN 2 */
    LED_RED_ON;                                                                                             //ºìµÆ³£ÁÁ
    usart1.printf("\x0c");                                   //ÇåÆÁ
    usart1.printf("\033[1;32;40m");                          //ÉèÖÃ×ÖÌåÖÕ¶ËΪÂÌÉ«
    usart1.printf("\r\n\r\nhello! I am iCore1S!\r\n\r\n\r\n");

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while ()
  {
  /* USER CODE END WHILE */

  /* USER CODE BEGIN 3 */
      HAL_Delay();                                                                                 //¶ÁÈ¡RTCÈÕÆÚºÍʱ¼ä
        HAL_RTC_GetTime(&hrtc, &sTime, RTC_FORMAT_BIN);
        HAL_RTC_GetDate(&hrtc, &sDate, RTC_FORMAT_BIN);

        if(second_tmp != sTime.Seconds){                                           //µ±ÃëÊý¾ÝÓ뱸·Ý²»Ò»ÖÂʱ£¬ÏòÖն˴òӡʱ¼ä/ÈÕÆÚ

            usart1.printf("  %02d:%02d:%02d  ",sTime.Hours,sTime.Minutes,sTime.Seconds);
            usart1.printf("20%02d-%02d-%02d  \r",sDate.Year,sDate.Month,sDate.Date);\
            second_tmp = sTime.Seconds;                                   //ÃëÊý¾Ý±¸·Ý
        }

  }
  /* USER CODE END 3 */

}

源代码下载链接：

链接：http://pan.baidu.com/s/1b1hxF4密码：pg08