console接口
h3c er8300
cisco asa
Quidway S5700-28C-SI Routing Switch
topsec
<H3C>?
reboot Reboot device
restore Restore configuration
password Set administrator's password
ip Display the IP configuration
display Display current information
ping Ping function
admin Admin the LAN interface
<H3C>dis
<H3C>display
sysinfo CPU and memory information
device Device information
version Version information
<H3C>display sy
<H3C>display sysinfo
CPU Used Rate: 0.0%
Memory Used Rate: 16.2% <H3C>dis
<H3C>display dev
<H3C>display device
manuinfo Manufacture information
<H3C>display device ma
<H3C>display device manuinfo
<H3C>display device manuinfo
DEVICE_NAME: ER8300
DEVICE_SERIAL_NUMBER: 219801A0A5M11B000064
MAC_ADDRESS: C4CA-D9B6-B98F
MANUFACTURING_DATE: -
VENDOR_NAME: H3C <H3C>dis
<H3C>display ver
<H3C>display version
<H3C>display version
Hardware: VER.A
Bootrom: 1.1.1.6
Software: ER8300V100R006 <H3C>ip ad
<H3C>ip address
<H3C>ip address
The LAN interface information:
IP address: 192.168.1.1
Mask: 255.255.255.0 ciscoasa> show version Cisco Adaptive Security Appliance Software Version 8.2()
Device Manager Version 6.4() Compiled on Fri -May- : by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config" ciscoasa up days hours Hardware: ASA5505, MB RAM, CPU Geode MHz
Internal ATA Compact Flash, 128MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB Encryption hardware device : Cisco ASA- on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05 : Int: Internal-Data0/ : address is a493.4c3d.b49b, irq
: Ext: Ethernet0/ : address is a493.4c3d.b493, irq
: Ext: Ethernet0/ : address is a493.4c3d.b494, irq
: Ext: Ethernet0/ : address is a493.4c3d.b495, irq
: Ext: Ethernet0/ : address is a493.4c3d.b496, irq
: Ext: Ethernet0/ : address is a493.4c3d.b497, irq
: Ext: Ethernet0/ : address is a493.4c3d.b498, irq
: Ext: Ethernet0/ : address is a493.4c3d.b499, irq
: Ext: Ethernet0/ : address is a493.4c3d.b49a, irq
: Int: Internal-Data0/ : address is 0000.0003., irq
: Int: Not used : irq
: Int: Not used : irq Licensed features for this platform:
Maximum Physical Interfaces :
VLANs : , DMZ Restricted
Inside Hosts :
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Disabled
SSL VPN Peers :
Total VPN Peers :
Dual ISPs : Disabled
VLAN Trunk Ports :
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions :
Total UC Proxy Sessions :
Botnet Traffic Filter : Disabled This platform has a Base license. Serial Number: JMX1622410A
Running Activation Key: 0xf52be66f 0x38e4339e 0x3c9359c0 0x8af8f034 0x87151a98
Configuration register is 0x1
Configuration has not been modified since last system restart.
ciscoasa>
ciscoasa> show flash: all
--#-- --length-- -----date/time------ path
May :: asa825-k8.bin
May :: coredumpinfo
May :: coredumpinfo/coredump.cfg
May :: asdm-.bin
May :: log
May :: crypto_archive
Jan :: FSCK0000.REC
Jan :: FSCK0001.REC
Jan :: FSCK0002.REC
Jan :: FSCK0003.REC
Jan :: FSCK0004.REC
Jan :: FSCK0005.REC
Jan :: FSCK0006.REC
Jan :: FSCK0007.REC
Jan :: FSCK0008.REC
Jan :: FSCK0009.REC
Jan :: FSCK0010.REC
Jan :: FSCK0011.REC
Jan :: FSCK0012.REC
Jan :: FSCK0013.REC
Jan :: FSCK0014.REC
Jan :: FSCK0015.REC
Jan :: FSCK0016.REC bytes total ( bytes free) ******** Flash Card Geometry/Format Info ******** COMPACT FLASH CARD GEOMETRY
Number of Heads:
Number of Cylinders
Sectors per Cylinder
Sector Size
Total Sectors Flash Model: UGB30SHP0128F6-ESX-1SD
ciscoasa> show curpriv
Username : enable_1
Current privilege level :
Current Mode/s : P_UNPR
ciscoasa# show configuration
: Saved
: Written by enable_15 at ::52.718 UTC Mon Sep
!
ASA Version 8.2()
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/
!
interface Ethernet0/
switchport access vlan
!
interface Ethernet0/
!
interface Ethernet0/
shutdown
!
interface Ethernet0/
shutdown
!
interface Ethernet0/
shutdown
!
interface Ethernet0/
shutdown
!
interface Ethernet0/
shutdown
!
interface Vlan1
nameif inside
security-level
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level
ip address 192.168.2.254 255.255.255.0
!
ftp mode passive
access-list extended permit ip any any
access-list extended permit tcp any any
pager lines
mtu inside
mtu outside
icmp unreachable rate-limit burst-size
no asdm history enable
arp timeout
access-group in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.2.1
timeout xlate ::
timeout conn :: half-closed :: udp :: icmp ::
timeout sunrpc :: h323 :: h225 :: mgcp :: mgcp-pat ::
timeout sip :: sip_media :: sip-invite :: sip-disconnect ::
timeout sip-provisional-media :: uauth :: absolute
timeout tcp-proxy-reassembly ::
timeout floating-conn ::
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds
crypto ipsec security-association lifetime kilobytes
telnet 0.0.0.0 0.0.0.0 inside
telnet 0.0.0.0 0.0.0.0 outside
telnet 192.168.2.0 255.255.255.0 outside
telnet timeout
ssh timeout
console timeout
dhcpd address 192.168.1.10-192.168.1.41 inside
dhcpd dns 221.11.1.67 221.11.1.68 interface inside
dhcpd enable inside
! threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
!
service-policy global_policy global
prompt hostname context
call-home reporting anonymous prompt
Cryptochecksum:a998ba915cb65ecf8729601cad068609
ciscoasa# User interface con0 is available Please Press ENTER. <GAOXIN_SW_CORE>dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.70 (S5700 V100R005C01SPC100)
Copyright (C) 2000-2011 HUAWEI TECH CO., LTD
Quidway S5700-28C-SI Routing Switch uptime is 68 weeks, 5 days, 0 hour, 25 minutes EFGEC 0(Master) : uptime is 68 weeks, 5 days, 0 hour, 24 minutes
256M bytes DDR Memory
32M bytes FLASH
Pcb      Version :  VER B
Basic  BOOTROM  Version :  127 Compiled at Apr 11 2012, 10:27:20
CPLD   Version : 4
Software Version : VRP (R) Software, Version 5.70 (S5700 V100R005C01SPC100)
FANCARD information
Pcb      Version : FAN VER B
PWRCARD I information
Pcb      Version : PWR VER A Topsec Operating System tos_3.3.005.072F_13.37
Topsec Network Security Technology CO.,LTD
http://www.topsec.com.cn
login: super
Password:
TopsecOS# ?
TopsecOS# show
helpmode chinese
system time set timezone +8
system devname set TopsecOS
TopsecOS# system
TopsecOS.system#
TopsecOS.system# version
Topsec Operating System tos_3.3.005.072F_13.37 K1306213916
[core_sw5120]dhcp enable
[core_sw5120]dhcp relay server-group 1 ip 192.168.5.1
[core_sw5120]display history-command
<core_sw5120>display brief interface 显示接口摘要
<core_sw5120>display users all
<core_sw5120>display version
<core_sw5120>display cpu-usage   28%
[core_sw5120]display memory      63%
[core_sw5120]display environment
电信猫
host> show version
Version : P300-G
Compile time : Apr 11 2019 15:52:57
Device uptime : 0 Years, 0 Days, 2 hours, 58 minutes,28 seconds.
Copyright (c) 2009-2015 All rights reserved. Device: MSG2100E-UPON-4V
Batch number: SX01
Customer: telecom
SubCustomer: shanxi
Serial number: 000E5E-FBDHY9800747A4825
IOS version: 3.20.44.20190411
Bootrom version: 3.10.25 Mainboard: MSG2100E-UPON-4V, Product version: T.10
PCB version: V1.3, BOM version: B0.0, CPLD version: N/A
Processor: 88F6660, at 1500Mhz with 256MB SDRAM 256MB Flash
DSP MIPS: 2000
2.4G WLAN Card: PCI-E 802.11 b/g/n Realtek RTL8192ER eth1: Marvell switch driver, mac-addr: 98:00:74:7a:48:1c
eth2: Marvell switch driver, mac-addr: 98:00:74:7a:48:1d
eth3: Marvell switch driver, mac-addr: 98:00:74:7a:48:1e
eth4: Marvell switch driver, mac-addr: 98:00:74:7a:48:1f
pon0: mv-avantalp driver, mac-addr: 98:00:74:7a:48:24
pon0: mv-avantalp driver, reg-mac: 98:00:74:7a:48:25

网络-console的更多相关文章

  1. JS BOM知识整理

    BOM部分主要是针对浏览器的内容,其中常用的就是window对象和location, window是全局对象很多关于浏览器的脚本设置都是通过它. location则是与地址栏内容相关,比如想要跳转到某 ...

  2. cobbler部署

    1.cobbler介绍 Cobbler是一个快速网络安装linux的服务,而且在经过调整也可以支持网络安装windows.该工具使用python开发,小巧轻便(才15k行python代码),使用简单的 ...

  3. JWT(Json Web Token)初探与实践

    前言什么是JWT?为什么使用JWT?什么时候使用JWT?JWT的基本结构HeaderPayloadSignature将他们放在一起项目实践JWT后端前端关于安全性总结参考 协议标准:https://t ...

  4. js操作serviceWorker缓存静态文件

    js操作serviceWorker缓存静态文件 serviceWorker的作用就是用来做离线应用的,在手机端程序中用的较多 先看下效果 index.html <!DOCTYPE html> ...

  5. 《网络》:设置三个密码:通过console口连接设备,进入特权模式,登录Telnet

    软件:Cisco Packet Tracer Instructor 软件下载链接在上一篇文章中. 内容:通过设置三个密码,熟悉采用Telnet方式配置交换机的方法. 细节说明:计算机的IP地址和交换机 ...

  6. Angular2入门系列教程7-HTTP(一)-使用Angular2自带的http进行网络请求

    上一篇:Angular2入门系列教程6-路由(二)-使用多层级路由并在在路由中传递复杂参数 感觉这篇不是很好写,因为涉及到网络请求,如果采用真实的网络请求,这个例子大家拿到手估计还要自己写一个web ...

  7. 前端网络、JavaScript优化以及开发小技巧

    一.网络优化 YSlow有23条规则,中文可以参考这里.这几十条规则最主要是在做消除或减少不必要的网络延迟,将需要传输的数据压缩至最少. 1)合并压缩CSS.JavaScript.图片,静态资源CDN ...

  8. Cowboy 开源 WebSocket 网络库

    Cowboy.WebSockets 是一个托管在 GitHub 上的基于 .NET/C# 实现的开源 WebSocket 网络库,其完整的实现了 RFC 6455 (The WebSocket Pro ...

  9. HTML5 网络拓扑图整合 OpenLayers 实现 GIS 地图应用

    在前面<百度地图.ECharts整合HT for Web网络拓扑图应用>我们有介绍百度地图和 HT for Web 的整合,我们今天来谈谈 OpenLayers 和 HT for Web  ...

随机推荐

  1. Kubenates熟悉

    Kuberetes命令,可用于查看信息和排查故障. kubectl cluster-info --context dev 查看master和服务的地址 kubectl config view 查看ku ...

  2. openstack网络DVR

    一.DVR描述 分布式路由 二.相关的专业术语 术语名称 术语解释 SNAT 在路由器后(POSTROUTING)将内网的ip地址修改为外网网卡的ip地址,也就是绑定浮动IP和外部通信 DNAT 在路 ...

  3. Ubuntu 修改 /etc/resolv.conf 被清空 或重启不生效解决

    sudo gedit /etc/NetworkManager/NetworkManager.conf 注释掉 dns=dnsmasq [main] plugins=ifupdown,keyfile,o ...

  4. Problem B 字符串类(I)

    封装一个字符串类,用于存储字符串和处理的相关功能,支持以下操作: 1. STR::STR()构造方法:创建一个空的字符串对象. 2. STR::STR(const char *)构造方法:创建一个字符 ...

  5. <Flume><Source Code><Flume源码阅读笔记>

    Overview source采集的日志首先会传入ChannelProcessor, 在其内首先会通过Interceptors进行过滤加工,然后通过ChannelSelector选择channel. ...

  6. 相册 垂直居中; 水平居中. 1)宽度 大于高度, 宽度 100%; 2) 高度 大于 宽度 , 高度100%; getimagesize , list --->line-height , text-align, vertical-align, max-height, max-width

    一: 效果: 1) 黑色 部分是 相框. 2) 图片 要实现 水平居中, 垂直居中 3) 如果 宽度 大于 高度 ,那么 宽度 100% ,如图1 , 高度 自适应 ,同时不能超过黑色相框的 高度 ; ...

  7. 58-63用ssh远程连接linux系统

    一.注意 在CentOS7.6中,ifconfig来查询IP已经不再适用,要用ip add 二.vim编辑器 编辑:按[i]键可以进入到编辑状态,显示insert这样的字眼就对了 退出:按esc退出编 ...

  8. js常用到的方法积累

    //获取对象长度的方法 function countObjLen(obj) { var count = 0; for (var property in obj) { if (Object.protot ...

  9. 【MySQL】5.6.x InnoDB Error Table mysql.innodb_table_stats not found

    [问题描述]: 检查error log的时候发现大量warnings: [Warning] InnoDB Error Table mysql.innodb_index_stats not found ...

  10. quartz 应用

    quartz api地址:http://www.quartz-scheduler.org/api/2.2.0/ 根据需求选择quartz调度方案: 1,如果调度时间是固定不变的,可以选择静态调度 2, ...