二进制方法-部署k8s集群部署1.18版本
二进制方法-部署k8s集群部署1.18版本
1. 前置知识点
1.1 生产环境可部署kubernetes集群的两种方式
目前生产部署Kubernetes集群主要有两种方式
kuberadm
Kubeadm是一个K8s部署工具，提供kubeadm init和kubeadm join，用于快速部署Kubernetes集群。
二进制包
从github下载发行版的二进制包，手动部署每个组件，组成Kubernetes集群。
Kubeadm降低部署门槛，但屏蔽了很多细节，遇到问题很难排查。如果想更容易可控，推荐使用二进制包部署Kubernetes集群，虽然手动部署麻烦点，期间可以学习很多工作原理，也利于后期维护。
1.2 安装要求
- 在开始之前，部署Kubernetes集群机器需要满足以下几个条件：
- 一台或多台机器，操作系统 CentOS7.x-86_x64
- 硬件配置：2GB或更多RAM，2个CPU或更多CPU，硬盘30GB或更多
- 集群中所有机器之间网络互通
- 可以访问外网，需要拉取镜像，如果服务器不能上网，需要提前下载镜像并导入节点
- 禁止swap分区
1.3 环境准备
1.3.1 软件环境
| 软件 | 版本 |
|---|---|
| 操作系统 | CentOS7.8_x64 （mini） |
| Docker | 19-ce |
| Kubernetes | 1.18 |
1.3.2 单master架构图
1.3.3 服务器整体规划
| 角色 | IP | 组件 |
|---|---|---|
| k8s-master | 192.168.0.201 | kube-apiserver，kube-controller-manager，kube-scheduler，etcd |
| k8s-node1 | 192.168.0.202 | kubelet，kube-proxy，docker etcd |
| k8s-node2 | 192.168.0.203 | kubelet，kube-proxy，docker，etcd |
1.4 操作系统初始化配置
# 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
# 关闭selinux
sed -i 's/enforcing/disabled/' /etc/selinux/config # 永久
setenforce 0 # 临时
# 关闭swap
swapoff -a # 临时
sed -ri 's/.*swap.*/#&/' /etc/fstab # 永久
# 根据规划设置主机名
hostnamectl set-hostname <hostname>
# 在master添加hosts
cat >> /etc/hosts << EOF
192.168.0.201 k8s-master
192.168.0.202 k8s-node1
192.168.0.203 k8s-node2
EOF
# 将桥接的IPv4流量传递到iptables的链
cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system # 生效
# 时间同步
yum install ntpdate -y
ntpdate time.windows.com
2. 部署Etcd集群
Etcd 是一个分布式键值存储系统，Kubernetes使用Etcd进行数据存储，所以先准备一个Etcd数据库，为解决Etcd单点故障，应采用集群方式部署，这里使用3台组建集群，可容忍1台机器故障，当然，你也可以使用5台组建集群，可容忍2台机器故障。
| 节点名称 | IP |
|---|---|
| etcd-1 | 192.168.0.201 |
| etcd-2 | 192.168.0.202 |
| etcd-3 | 192.168.0.203 |
注：为了节省机器，这里与K8s节点机器复用。也可以独立于k8s集群之外部署，只要apiserver能连接到就行。
2.1 准备cfssl 证书生成工具
cfssl是一个开源的证书管理工具，使用json文件生成证书，相比openssl更方便使用。
找任意一台服务器操作，这里用Master节点
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo
2.1.1 在master执行工具安装
[root@k8s-master ~]# mkdir -p ~/cfssl/
[root@k8s-master ~]# cd cfssl/
[root@k8s-master cfssl]# pwd
/root/cfssl
[root@k8s-master cfssl]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
[root@k8s-master cfssl]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
[root@k8s-master cfssl]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
[root@k8s-master cfssl]# chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
[root@k8s-master cfssl]# mv cfssl_linux-amd64 /usr/local/bin/cfssl
[root@k8s-master cfssl]# mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
[root@k8s-master cfssl]# mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo
2.2 生成Etcd证书
2.2.1 创建工作目录
[root@k8s-master ~]# mkdir -p ~/TLS/{etcd,k8s}
[root@k8s-master ~]# cd /root/TLS/etcd/
2.2.2 自签CA：
执行json格式配置
cat > ca-config.json << EOF
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"www": {
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]
}
}
}
}
EOF
cat > ca-csr.json << EOF
{
"CN": "etcd CA",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "Beijing",
"ST": "Beijing"
}
]
}
EOF
2.2.2.1 执行生成证书
[root@k8s-master etcd]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
2020/11/17 20:53:48 [INFO] generating a new CA key and certificate from CSR
2020/11/17 20:53:48 [INFO] generate received request
2020/11/17 20:53:48 [INFO] received CSR
2020/11/17 20:53:48 [INFO] generating key: rsa-2048
2020/11/17 20:53:48 [INFO] encoded CSR
2020/11/17 20:53:48 [INFO] signed certificate with serial number 101950529088026535677297860863057856432140076739
2.2.2.2 验证CA证书
[root@k8s-master etcd]# ls *pem
ca-key.pem ca.pem
2.2.3 使用自签CA签发Etcd HTTTPS证书
创建证书申请文件
cat > server-csr.json << EOF
{
"CN": "etcd",
"hosts": [
"192.168.0.201",
"192.168.0.202",
"192.168.0.203"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing"
}
]
}
EOF
执行配置文件
[root@k8s-master etcd]# cat > server-csr.json << EOF
> {
> "CN": "etcd",
> "hosts": [
> "192.168.0.201",
> "192.168.0.202",
> "192.168.0.203"
> ],
> "key": {
> "algo": "rsa",
> "size": 2048
> },
> "names": [
> {
> "C": "CN",
> "L": "BeiJing",
> "ST": "BeiJing"
> }
> ]
> }
> EOF
注：上述文件hosts字段中IP为所有etcd节点的集群内部通信IP，一个都不能少！为了方便后期扩容可以多写几个预留的IP。
2.2.3.1 生成Etcd 证书
[root@k8s-master etcd]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server
2020/11/17 21:03:05 [INFO] generate received request
2020/11/17 21:03:05 [INFO] received CSR
2020/11/17 21:03:05 [INFO] generating key: rsa-2048
2020/11/17 21:03:05 [INFO] encoded CSR
2020/11/17 21:03:05 [INFO] signed certificate with serial number 134705649830183343899987337527377566420156796503
2020/11/17 21:03:05 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
2.2.3.2 验证etcd证书
[root@k8s-master etcd]# ls server*pem
server-key.pem server.pem
3. 从Github下载二进制文件
[root@k8s-master etcd]# mkdir -p ~/tools
[root@k8s-master etcd]# cd /root/tools/
[root@k8s-master tools]# wget https://github.com/etcd-io/etcd/releases/download/v3.4.9/etcd-v3.4.9-linux-amd64.tar.gz
[root@k8s-master tools]# ll
总用量 16960
-rw-r--r--. 1 root root 17364053 11月 17 21:09 etcd-v3.4.9-linux-amd64.tar.gz
4. 部署Etcd集群
以下在节点1上操作，为简化操作，待会将节点1生成的所有文件拷贝到节点2和节点3.
4.1 创建工作目录并解压二进制包
mkdir /opt/etcd/{bin,cfg,ssl} -p
tar zxvf etcd-v3.4.9-linux-amd64.tar.gz
mv etcd-v3.4.9-linux-amd64/{etcd,etcdctl} /opt/etcd/bin/
执行上面命令工作目录
[root@k8s-master etcd]# cd /root/tools/
[root@k8s-master tools]# ll
总用量 16960
-rw-r--r--. 1 root root 17364053 11月 17 21:09 etcd-v3.4.9-linux-amd64.tar.gz
[root@k8s-master tools]# tar zxvf etcd-v3.4.9-linux-amd64.tar.gz
[root@k8s-master tools]# mv etcd-v3.4.9-linux-amd64/etcd /opt/etcd/bin/
[root@k8s-master tools]# mv etcd-v3.4.9-linux-amd64/etcdctl /opt/etcd/bin/
4.2 创建etcd配置文件
cat > /opt/etcd/cfg/etcd.conf << EOF
#[Member]
ETCD_NAME="etcd-1"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.201:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.201:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.201:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.201:2379"
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.0.201:2380,etcd-2=https://192.168.0.202:2380,etcd-3=https://192.168.0.203:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF
ETCD_NAME：节点名称，集群中唯一
ETCD_DATA_DIR：数据目录
ETCD_LISTEN_PEER_URLS：集群通信监听地址
ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址
ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址
ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址
ETCD_INITIAL_CLUSTER：集群节点地址
ETCD_INITIAL_CLUSTER_TOKEN：集群Token
ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群
服务器执行配置
[root@k8s-master ~]# cat > /opt/etcd/cfg/etcd.conf << EOF
> #[Member]
> ETCD_NAME="etcd-1"
> ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
> ETCD_LISTEN_PEER_URLS="https://192.168.0.201:2380"
> ETCD_LISTEN_CLIENT_URLS="https://192.168.0.201:2379"
> #[Clustering]
> ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.201:2380"
> ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.201:2379"
> ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.0.201:2380,etcd-2=https://192.168.0.202:2380,etcd-3=https://192.168.0.203:2380"
> ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
> ETCD_INITIAL_CLUSTER_STATE="new"
> EOF
4.3 配置systemctl管理etcd服务
cat > /usr/lib/systemd/system/etcd.service << EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd.conf
ExecStart=/opt/etcd/bin/etcd \
--cert-file=/opt/etcd/ssl/server.pem \
--key-file=/opt/etcd/ssl/server-key.pem \
--peer-cert-file=/opt/etcd/ssl/server.pem \
--peer-key-file=/opt/etcd/ssl/server-key.pem \
--trusted-ca-file=/opt/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/opt/etcd/ssl/ca.pem \
--logger=zap
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
服务器执行配置
[root@k8s-master ~]# cat > /usr/lib/systemd/system/etcd.service << EOF
> [Unit]
> Description=Etcd Server
> After=network.target
> After=network-online.target
> Wants=network-online.target
> [Service]
> Type=notify
> EnvironmentFile=/opt/etcd/cfg/etcd.conf
> ExecStart=/opt/etcd/bin/etcd \
> --cert-file=/opt/etcd/ssl/server.pem \
> --key-file=/opt/etcd/ssl/server-key.pem \
> --peer-cert-file=/opt/etcd/ssl/server.pem \
> --peer-key-file=/opt/etcd/ssl/server-key.pem \
> --trusted-ca-file=/opt/etcd/ssl/ca.pem \
> --peer-trusted-ca-file=/opt/etcd/ssl/ca.pem \
> --logger=zap
> Restart=on-failure
> LimitNOFILE=65536
> [Install]
> WantedBy=multi-user.target
> EOF
4.4 拷贝生成的证书
拷贝ca证书和etcd证书
[root@k8s-master ~]# cp ~/TLS/etcd/ca*pem /opt/etcd/ssl/
[root@k8s-master ~]# cp -a ~/TLS/etcd/server*pem /opt/etcd/ssl/
[root@k8s-master ~]# ll /opt/etcd/ssl/
总用量 16
-rw-------. 1 root root 1675 11月 19 14:53 ca-key.pem
-rw-r--r--. 1 root root 1265 11月 19 14:53 ca.pem
-rw-------. 1 root root 1675 11月 17 21:03 server-key.pem
-rw-r--r--. 1 root root 1338 11月 17 21:03 server.pem
4.5 拷贝master节点所有生成的文件拷贝到节点2和节点3
[root@k8s-master ~]# scp -r /opt/etcd/ root@192.168.0.202:/opt
[root@k8s-master ~]# scp -r /usr/lib/systemd/system/etcd.service root@192.168.0.202:/usr/lib/systemd/system/
[root@k8s-master ~]# scp -r /opt/etcd/ root@192.168.0.203:/opt
[root@k8s-master ~]# scp -r /usr/lib/systemd/system/etcd.service root@192.168.0.203:/usr/lib/systemd/system/
4.6 修改节点2和节点3分别修改etcd.conf配置文件中的节点名称和当前服务器IP
4.6.1 修改k8s-node1节点etcd.conf配置文件
[root@k8s-node1 ~]# vim /opt/etcd/cfg/etcd.conf
[root@k8s-node1 ~]# cat /opt/etcd/cfg/etcd.conf
#[Member]
ETCD_NAME="etcd-2" # 修改此处，节点2改为etcd-2，节点3改为etcd-3
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.202:2380" # 修改此处为当前服务器IP
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.202:2379" # 修改此处为当前服务器IP
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.202:2380" # 修改此处为当前服务器IP
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.202:2379" # 修改此处为当前服务器IP
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.0.201:2380,etcd-2=https://192.168.0.202:2380,etcd-3=https://192.168.0.203:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
4.6.2 修改k8s-node2节点etcd.conf配置文件
[root@k8s-node2 ~]# vim /opt/etcd/cfg/etcd.conf
[root@k8s-node2 ~]# cat /opt/etcd/cfg/etcd.conf
#[Member]
ETCD_NAME="etcd-3" # 修改此处，节点2改为etcd-2，节点3改为etcd-3
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.0.203:2380" # 修改此处为当前服务器IP
ETCD_LISTEN_CLIENT_URLS="https://192.168.0.203:2379" # 修改此处为当前服务器IP
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.0.203:2380" # 修改此处为当前服务器IP
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.0.203:2379" # 修改此处为当前服务器IP
ETCD_INITIAL_CLUSTER="etcd-1=https://192.168.0.201:2380,etcd-2=https://192.168.0.202:2380,etcd-3=https://192.168.0.203:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
4.7 启动并设置开机启动
启动master节点
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start etcd
[root@k8s-master ~]# systemctl enable etcd
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /usr/lib/systemd/system/etcd.service.
启动node1节点
[root@k8s-node1 ~]# systemctl daemon-reload
[root@k8s-node1 ~]# systemctl start etcd
[root@k8s-node1 ~]# systemctl enable etcd
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /usr/lib/systemd/system/etcd.service.
启动node2节点
[root@k8s-node2 ~]# systemctl daemon-reload
[root@k8s-node2 ~]# systemctl start etcd
[root@k8s-node2 ~]# systemctl enable etcd
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /usr/lib/systemd/system/etcd.service.
4.8 查看集群状态
[root@k8s-master ~]# ETCDCTL_API=3 /opt/etcd/bin/etcdctl --cacert=/opt/etcd/ssl/ca.pem --cert=/opt/etcd/ssl/server.pem --key=/opt/etcd/ssl/server-key.pem --endpoints="https://192.168.0.201:2379,https://192.168.0.202:2379,https://192.168.0.203:2379" endpoint health
https://192.168.0.201:2379 is healthy: successfully committed proposal: took = 40.294783ms
https://192.168.0.203:2379 is healthy: successfully committed proposal: took = 40.593516ms
https://192.168.0.202:2379 is healthy: successfully committed proposal: took = 21.798951ms
如果输出上面信息，就说明集群部署成功。如果有问题第一步先看日志：/var/log/message 或 journalctl -u etcd
5. 安装Docker
以下在所有节点操作，这里采用yum安装方式，
5.1 安装docker依赖包
yum install -y yum-utils device-mapper-persistent-data lvm2
5.1.1 在k8s master上执行
[root@k8s-master ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
5.1.2 在k8s node1上执行
[root@k8s-node1 ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
5.1.3 在k8s node2上执行
[root@k8s-node2 ~]# yum install -y yum-utils device-mapper-persistent-data lvm2
5.2 安装docker镜像源
5.2.1 在k8s master执行
[root@k8s-master ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
已加载插件：fastestmirror
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
5.2.2 在k8s node1执行
[root@k8s-node1 ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
已加载插件：fastestmirror
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
5.2.3 在k8s node2执行
[root@k8s-node2 ~]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
已加载插件：fastestmirror
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
5.3 安装docker
5.3.1 在k8s master上执行docker安装
[root@k8s-master ~]# yum install -y docker-ce
5.3.2 在k8s node1上执行docker安装
[root@k8s-node1 ~]# yum install -y docker-ce
5.3.3 在k8s node2上执行docker安装
[root@k8s-node2 ~]# yum install -y docker-ce
5.6 配置镜像加速
mkdir -p /etc/docker
cat > /etc/docker/daemon.json << EOF
{
"registry-mirrors": ["https://b9pmyelo.mirror.aliyuncs.com"]
}
EOF
5.7 启动docker，设置开机启动
/bin/systemctl daemon-reload
/bin/systemctl start docker
/bin/systemctl enable docker
6. 部署master node
6.1 生成kube-apiserver证书
6.1.1 生成ca证书
cat > ca-config.json << EOF
{
"signing": {
"default": {
"expiry": "87600h"
},
"profiles": {
"kubernetes": {
"expiry": "87600h",
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
]
}
}
}
}
EOF
cat > ca-csr.json << EOF
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "Beijing",
"ST": "Beijing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
执行apiserver证书配置
[root@k8s-master ~]# mkdir -p /root/TLS/apiserver
[root@k8s-master ~]# cd /root/TLS/apiserver/
[root@k8s-master apiserver]# ll
总用量 0
[root@k8s-master apiserver]# cat > ca-config.json << EOF
> {
> "signing": {
> "default": {
> "expiry": "87600h"
> },
> "profiles": {
> "kubernetes": {
> "expiry": "87600h",
> "usages": [
> "signing",
> "key encipherment",
> "server auth",
> "client auth"
> ]
> }
> }
> }
> }
> EOF
[root@k8s-master apiserver]# cat > ca-csr.json << EOF
> {
> "CN": "kubernetes",
> "key": {
> "algo": "rsa",
> "size": 2048
> },
> "names": [
> {
> "C": "CN",
> "L": "Beijing",
> "ST": "Beijing",
> "O": "k8s",
> "OU": "System"
> }
> ]
> }
> EOF执行生成ca证书
[root@k8s-master apiserver]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
2020/11/19 21:02:47 [INFO] generating a new CA key and certificate from CSR
2020/11/19 21:02:47 [INFO] generate received request
2020/11/19 21:02:47 [INFO] received CSR
2020/11/19 21:02:47 [INFO] generating key: rsa-2048
2020/11/19 21:02:47 [INFO] encoded CSR
2020/11/19 21:02:47 [INFO] signed certificate with serial number 618964693704774402914754546857528123070512384496
[root@k8s-master apiserver]# ll *pem
-rw-------. 1 root root 1675 11月 19 21:02 ca-key.pem
-rw-r--r--. 1 root root 1359 11月 19 21:02 ca.pem
6.2.1 生成kube-apiserver https证书
创建证书申请文件
cat > server-csr.json << EOF
{
"CN": "kubernetes",
"hosts": [
"10.0.0.1",
"127.0.0.1",
"192.168.0.201",
"192.168.0.202",
"192.168.0.203",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
执行生成apiserver证书配置
[root@k8s-master /]# cd /root/TLS/apiserver/
[root@k8s-master apiserver]# cat > server-csr.json << EOF
> {
> "CN": "kubernetes",
> "hosts": [
> "10.0.0.1",
> "127.0.0.1",
> "192.168.0.201",
> "192.168.0.202",
> "192.168.0.203",
> "kubernetes",
> "kubernetes.default",
> "kubernetes.default.svc",
> "kubernetes.default.svc.cluster",
> "kubernetes.default.svc.cluster.local"
> ],
> "key": {
> "algo": "rsa",
> "size": 2048
> },
> "names": [
> {
> "C": "CN",
> "L": "BeiJing",
> "ST": "BeiJing",
> "O": "k8s",
> "OU": "System"
> }
> ]
> }
> EOF
注：上述文件hosts字段中IP为所有Master/LB/VIP IP，一个都不能少！为了方便后期扩容可以多写几个预留的IP。
执行生成证书
[root@k8s-master apiserver]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server
2020/11/19 21:16:00 [INFO] generate received request
2020/11/19 21:16:00 [INFO] received CSR
2020/11/19 21:16:00 [INFO] generating key: rsa-2048
2020/11/19 21:16:01 [INFO] encoded CSR
2020/11/19 21:16:01 [INFO] signed certificate with serial number 61289883131760633497559745925872614733825752323
2020/11/19 21:16:01 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements"). [root@k8s-master apiserver]# ls server*pem
server-key.pem server.pem
6.2 下载kubernetes安装包
下载地址：https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.18.md#v1183
注释：打开链接你会发现里面有很多包，下载一个server包就够了，包含了master和worker node二进制文件
6.3 解压二进制包
[root@k8s-master /]# mkdir -p /opt/kubernetes/{bin,cfg,ssl,logs}
[root@k8s-master apiserver]# cd /root/tools/
[root@k8s-master tools]# wget https://storage.googleapis.com/kubernetes-release/release/v1.18.3/kubernetes-server-linux-amd64.tar.gz
[root@k8s-master tools]# tar -zxvf kubernetes-server-linux-amd64.tar.gz
[root@k8s-master tools]# cd kubernetes/server/bin/
[root@k8s-master bin]# ll
总用量 1087376
-rwxr-xr-x. 1 root root 48128000 5月 20 2020 apiextensions-apiserver
-rwxr-xr-x. 1 root root 39813120 5月 20 2020 kubeadm
-rwxr-xr-x. 1 root root 120668160 5月 20 2020 kube-apiserver
-rw-r--r--. 1 root root 8 5月 20 2020 kube-apiserver.docker_tag
-rw-------. 1 root root 174558720 5月 20 2020 kube-apiserver.tar
-rwxr-xr-x. 1 root root 110059520 5月 20 2020 kube-controller-manager
-rw-r--r--. 1 root root 8 5月 20 2020 kube-controller-manager.docker_tag
-rw-------. 1 root root 163950080 5月 20 2020 kube-controller-manager.tar
-rwxr-xr-x. 1 root root 44032000 5月 20 2020 kubectl
-rwxr-xr-x. 1 root root 113283800 5月 20 2020 kubelet
-rwxr-xr-x. 1 root root 38379520 5月 20 2020 kube-proxy
-rw-r--r--. 1 root root 8 5月 20 2020 kube-proxy.docker_tag
-rw-------. 1 root root 119099392 5月 20 2020 kube-proxy.tar
-rwxr-xr-x. 1 root root 42950656 5月 20 2020 kube-scheduler
-rw-r--r--. 1 root root 8 5月 20 2020 kube-scheduler.docker_tag
-rw-------. 1 root root 96841216 5月 20 2020 kube-scheduler.tar
-rwxr-xr-x. 1 root root 1687552 5月 20 2020 mounter
[root@k8s-master bin]# cp kube-apiserver /opt/kubernetes/bin/
[root@k8s-master bin]# cp kube-scheduler /opt/kubernetes/bin/
[root@k8s-master bin]# cp kube-controller-manager /opt/kubernetes/bin/
[root@k8s-master bin]# cp kubectl /usr/bin/
6.4 部署kube-apiserver
6.4.1 创建配置文件
cat > /opt/kubernetes/cfg/kube-apiserver.conf << EOF
KUBE_APISERVER_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/opt/kubernetes/logs \\
--etcd-servers=https://192.168.0.201:2379,https://192.168.0.202:2379,https://192.168.0.203:2379 \\
--bind-address=192.168.0.201 \\
--secure-port=6443 \\
--advertise-address=192.168.0.201 \\
--allow-privileged=true \\
--service-cluster-ip-range=10.0.0.0/24 \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction \\
--authorization-mode=RBAC,Node \\
--enable-bootstrap-token-auth=true \\
--token-auth-file=/opt/kubernetes/cfg/token.csv \\
--service-node-port-range=30000-32767 \\
--kubelet-client-certificate=/opt/kubernetes/ssl/server.pem \\
--kubelet-client-key=/opt/kubernetes/ssl/server-key.pem \\
--tls-cert-file=/opt/kubernetes/ssl/server.pem \\
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\
--client-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--etcd-cafile=/opt/etcd/ssl/ca.pem \\
--etcd-certfile=/opt/etcd/ssl/server.pem \\
--etcd-keyfile=/opt/etcd/ssl/server-key.pem \\
--audit-log-maxage=30 \\
--audit-log-maxbackup=3 \\
--audit-log-maxsize=100 \\
--audit-log-path=/opt/kubernetes/logs/k8s-audit.log"
EOF
注释：上面两个\ \ 第一个是转义符，第二个是换行符，使用转义符是为了使用EOF保留换行符。
- –logtostderr：启用日志
- —v：日志等级
- –log-dir：日志目录
- –etcd-servers：etcd集群地址
- –bind-address：监听地址
- –secure-port：https安全端口
- –advertise-address：集群通告地址
- –allow-privileged：启用授权
- –service-cluster-ip-range：Service虚拟IP地址段
- –enable-admission-plugins：准入控制模块
- –authorization-mode：认证授权，启用RBAC授权和节点自管理
- –enable-bootstrap-token-auth：启用TLS bootstrap机制
- –token-auth-file：bootstrap token文件
- –service-node-port-range：Service nodeport类型默认分配端口范围
- –kubelet-client-xxx：apiserver访问kubelet客户端证书
- –tls-xxx-file：apiserver https证书
- –etcd-xxxfile：连接Etcd集群证书
- –audit-log-xxx：审计日志
6.4.2 执行生成配置
[root@k8s-master /]# cat > /opt/kubernetes/cfg/kube-apiserver.conf << EOF
> KUBE_APISERVER_OPTS="--logtostderr=false \\
> --v=2 \\
> --log-dir=/opt/kubernetes/logs \\
> --etcd-servers=https://192.168.0.201:2379,https://192.168.0.202:2379,https://192.168.0.203:2379 \\
> --bind-address=192.168.0.201 \\
> --secure-port=6443 \\
> --advertise-address=192.168.0.201 \\
> --allow-privileged=true \\
> --service-cluster-ip-range=10.0.0.0/24 \\
> --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction \\
> --authorization-mode=RBAC,Node \\
> --enable-bootstrap-token-auth=true \\
> --token-auth-file=/opt/kubernetes/cfg/token.csv \\
> --service-node-port-range=30000-32767 \\
> --kubelet-client-certificate=/opt/kubernetes/ssl/server.pem \\
> --kubelet-client-key=/opt/kubernetes/ssl/server-key.pem \\
> --tls-cert-file=/opt/kubernetes/ssl/server.pem \\
> --tls-private-key-file=/opt/kubernetes/ssl/server-key.pem \\
> --client-ca-file=/opt/kubernetes/ssl/ca.pem \\
> --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\
> --etcd-cafile=/opt/etcd/ssl/ca.pem \\
> --etcd-certfile=/opt/etcd/ssl/server.pem \\
> --etcd-keyfile=/opt/etcd/ssl/server-key.pem \\
> --audit-log-maxage=30 \\
> --audit-log-maxbackup=3 \\
> --audit-log-maxsize=100 \\
> --audit-log-path=/opt/kubernetes/logs/k8s-audit.log"
> EOF
6.4.3 拷贝刚才生成的apiserver证书
[root@k8s-master /]# cp -a /root/TLS/apiserver/ca*pem /opt/kubernetes/ssl/
[root@k8s-master /]# cp -a /root/TLS/apiserver/server*pem /opt/kubernetes/ssl/
[root@k8s-master /]# ll /opt/kubernetes/ssl/
总用量 16
-rw-------. 1 root root 1675 11月 19 21:02 ca-key.pem
-rw-r--r--. 1 root root 1359 11月 19 21:02 ca.pem
-rw-------. 1 root root 1679 11月 19 21:16 server-key.pem
-rw-r--r--. 1 root root 1627 11月 19 21:16 server.pem
6.4.4 启用TLS Bootstrapping 机制
TLS Bootstraping：Master apiserver启用TLS认证后，Node节点kubelet和kube-proxy要与kube-apiserver进行通信，必须使用CA签发的有效证书才可以，当Node节点很多时，这种客户端证书颁发需要大量工作，同样也会增加集群扩展复杂度。为了简化流程，Kubernetes引入了TLS bootstraping机制来自动颁发客户端证书，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。所以强烈建议在Node上使用这种方式，目前主要用于kubelet，kube-proxy还是由我们统一颁发一个证书。
TLS bootstraping 工作流程：
创建上述配置文件中token文件：
cat > /opt/kubernetes/cfg/token.csv << EOF
c47ffb939f5ca36231d9e3121a252940,kubelet-bootstrap,10001,"system:node-bootstrapper"
EOF
执行以上操作
[root@k8s-master ~]# cat > /opt/kubernetes/cfg/token.csv << EOF
> c47ffb939f5ca36231d9e3121a252940,kubelet-bootstrap,10001,"system:node-bootstrapper"
> EOF
生成token码，可以自行生成替换
[root@k8s-master ~]# head -c 16 /dev/urandom | od -An -t x | tr -d ' '
d2251ee6e9f478ef53f768d2873a3a7a
6.4.5 使用systemd管理apiserver
cat > /usr/lib/systemd/system/kube-apiserver.service << EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-apiserver.conf
ExecStart=/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
执行管理文件
[root@k8s-master ~]# cat > /usr/lib/systemd/system/kube-apiserver.service << EOF
> [Unit]
> Description=Kubernetes API Server
> Documentation=https://github.com/kubernetes/kubernetes
> [Service]
> EnvironmentFile=/opt/kubernetes/cfg/kube-apiserver.conf
> ExecStart=/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
> Restart=on-failure
> [Install]
> WantedBy=multi-user.target
> EOF
6.4.6 启动并设置开机启动
systemctl daemon-reload
systemctl start kube-apiserver
systemctl enable kube-apiserver
执行启动apiserver文件
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start kube-apiserver
[root@k8s-master ~]# systemctl enable kube-apiserver
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-apiserver.service to /usr/lib/systemd/system/kube-apiserver.service.
验证服务是否启动
[root@k8s-master ~]# netstat -lntup|grep kube-apiserver
tcp 0 0 192.168.0.201:6443 0.0.0.0:* LISTEN 2701/kube-apiserver
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 2701/kube-apiserver
[root@k8s-master ~]# ps -ef |grep kube-apiserver
root 2701 1 1 16:03 ? 00:01:08 /opt/kubernetes/bin/kube-apiserver --logtostderr=false --v=2 --log-dir=/opt/kubernetes/logs --etcd-servers=https://192.168.0.201:2379,https://192.168.0.202:2379,https://192.168.0.203:2379 --bind-address=192.168.0.201 --secure-port=6443 --advertise-address=192.168.0.201 --allow-privileged=true --service-cluster-ip-range=10.0.0.0/24 --enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction --authorization-mode=RBAC,Node --enable-bootstrap-token-auth=true --token-auth-file=/opt/kubernetes/cfg/token.csv --service-node-port-range=30000-32767 --kubelet-client-certificate=/opt/kubernetes/ssl/server.pem --kubelet-client-key=/opt/kubernetes/ssl/server-key.pem --tls-cert-file=/opt/kubernetes/ssl/server.pem --tls-private-key-file=/opt/kubernetes/ssl/server-key.pem --client-ca-file=/opt/kubernetes/ssl/ca.pem --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem --etcd-cafile=/opt/etcd/ssl/ca.pem --etcd-certfile=/opt/etcd/ssl/server.pem --etcd-keyfile=/opt/etcd/ssl/server-key.pem --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/opt/kubernetes/logs/k8s-audit.log
root 2768 2053 0 17:07 pts/0 00:00:00 grep --color=auto kube-apiserver
6.4.7 授权kubelet-bootstrap用户允许请求证书
kubectl create clusterrolebinding kubelet-bootstrap \
--clusterrole=system:node-bootstrapper \
--user=kubelet-bootstrap
6.5 部署kube-controller-manager
6.5.1 创建kube-controller-manager配置文件
cat > /opt/kubernetes/cfg/kube-controller-manager.conf << EOF
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/opt/kubernetes/logs \\
--leader-elect=true \\
--master=127.0.0.1:8080 \\
--bind-address=127.0.0.1 \\
--allocate-node-cidrs=true \\
--cluster-cidr=10.244.0.0/16 \\
--service-cluster-ip-range=10.0.0.0/24 \\
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--root-ca-file=/opt/kubernetes/ssl/ca.pem \\
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\
--experimental-cluster-signing-duration=87600h0m0s"
EOF
注释
- –master：通过本地非安全本地端口8080连接apiserver。
- –leader-elect：当该组件启动多个时，自动选举（HA）
- –cluster-signing-cert-file/–cluster-signing-key-file：自动为kubelet颁发证书的CA，与apiserver保持一致
执行以上配置文件
[root@k8s-master ~]# cat > /opt/kubernetes/cfg/kube-controller-manager.conf << EOF
> KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=false \\
> --v=2 \\
> --log-dir=/opt/kubernetes/logs \\
> --leader-elect=true \\
> --master=127.0.0.1:8080 \\
> --bind-address=127.0.0.1 \\
> --allocate-node-cidrs=true \\
> --cluster-cidr=10.244.0.0/16 \\
> --service-cluster-ip-range=10.0.0.0/24 \\
> --cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\
> --cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem \\
> --root-ca-file=/opt/kubernetes/ssl/ca.pem \\
> --service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\
> --experimental-cluster-signing-duration=87600h0m0s"
> EOF
6.5.2 创建controller-manager 的systemd管理配置文件
cat > /usr/lib/systemd/system/kube-controller-manager.service << EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-controller-manager.conf
ExecStart=/opt/kubernetes/bin/kube-controller-manager \$KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
在master执行controller-manager 的systemd管理配置文件
[root@k8s-master ~]# cat > /usr/lib/systemd/system/kube-controller-manager.service << EOF
> [Unit]
> Description=Kubernetes Controller Manager
> Documentation=https://github.com/kubernetes/kubernetes
> [Service]
> EnvironmentFile=/opt/kubernetes/cfg/kube-controller-manager.conf
> ExecStart=/opt/kubernetes/bin/kube-controller-manager \$KUBE_CONTROLLER_MANAGER_OPTS
> Restart=on-failure
> [Install]
> WantedBy=multi-user.target
> EOF
6.5.3 启动并设置开机启动
systemctl daemon-reload
systemctl start kube-controller-manager
systemctl enable kube-controller-manager
在master环境执行启动和开机启动
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start kube-controller-manager
[root@k8s-master ~]# systemctl enable kube-controller-manager
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-controller-manager.service to /usr/lib/systemd/system/kube-controller-manager.service.
6.6 部署kube-scheduler
6.6.1 在master上创建kube-scheduler配置文件
cat > /opt/kubernetes/cfg/kube-scheduler.conf << EOF
KUBE_SCHEDULER_OPTS="--logtostderr=false \
--v=2 \
--log-dir=/opt/kubernetes/logs \
--leader-elect \
--master=127.0.0.1:8080 \
--bind-address=127.0.0.1"
EOF
注释
- –master：通过本地非安全本地端口8080连接apiserver。
- –leader-elect：当该组件启动多个时，自动选举（HA）
执行配置文件
[root@k8s-master ~]# cat > /opt/kubernetes/cfg/kube-scheduler.conf << EOF
> KUBE_SCHEDULER_OPTS="--logtostderr=false \
> --v=2 \
> --log-dir=/opt/kubernetes/logs \
> --leader-elect \
> --master=127.0.0.1:8080 \
> --bind-address=127.0.0.1"
> EOF
6.6.2 配置systemd管理scheduler
cat > /usr/lib/systemd/system/kube-scheduler.service << EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-scheduler.conf
ExecStart=/opt/kubernetes/bin/kube-scheduler \$KUBE_SCHEDULER_OPTS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
执行配置
[root@k8s-master ~]# cat > /usr/lib/systemd/system/kube-scheduler.service << EOF
> [Unit]
> Description=Kubernetes Scheduler
> Documentation=https://github.com/kubernetes/kubernetes
> [Service]
> EnvironmentFile=/opt/kubernetes/cfg/kube-scheduler.conf
> ExecStart=/opt/kubernetes/bin/kube-scheduler \$KUBE_SCHEDULER_OPTS
> Restart=on-failure
> [Install]
> WantedBy=multi-user.target
> EOF
6.6.3 启动并设置开机启动
systemctl daemon-reload
systemctl start kube-scheduler
systemctl enable kube-scheduler
执行开机启动
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start kube-scheduler
[root@k8s-master ~]# systemctl enable kube-scheduler
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-scheduler.service to /usr/lib/systemd/system/kube-scheduler.service.
6.6.4 查看集群状态
[root@k8s-master ~]# kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy {"health":"true"}
etcd-2 Healthy {"health":"true"}
etcd-1 Healthy {"health":"true"}
注释
如上输出说明master节点组件运行正常
7. 部署worker node
下面还是在Master Node上操作，即同时作为Worker Node
7.1 创建工作目录并拷贝二进制文件
在所有worker node创建工作目录：
mkdir -p /opt/kubernetes/{bin,cfg,ssl,logs}
从master节点拷贝kubelet kube-proxy配置文件：
[root@k8s-master /]# cd /root/tools/
[root@k8s-master tools]# ll
总用量 372092
drwxr-xr-x. 3 630384594 600260513 96 11月 19 13:59 etcd-v3.4.9-linux-amd64
-rw-r--r--. 1 root root 17364053 11月 17 21:09 etcd-v3.4.9-linux-amd64.tar.gz
drwxr-xr-x. 4 root root 79 5月 20 2020 kubernetes
-rw-r--r--. 1 root root 363654483 11月 19 21:41 kubernetes-server-linux-amd64.tar.gz
[root@k8s-master tools]# cd kubernetes/server/bin/
[root@k8s-master bin]# ll
总用量 1087376
-rwxr-xr-x. 1 root root 48128000 5月 20 2020 apiextensions-apiserver
-rwxr-xr-x. 1 root root 39813120 5月 20 2020 kubeadm
-rwxr-xr-x. 1 root root 120668160 5月 20 2020 kube-apiserver
-rw-r--r--. 1 root root 8 5月 20 2020 kube-apiserver.docker_tag
-rw-------. 1 root root 174558720 5月 20 2020 kube-apiserver.tar
-rwxr-xr-x. 1 root root 110059520 5月 20 2020 kube-controller-manager
-rw-r--r--. 1 root root 8 5月 20 2020 kube-controller-manager.docker_tag
-rw-------. 1 root root 163950080 5月 20 2020 kube-controller-manager.tar
-rwxr-xr-x. 1 root root 44032000 5月 20 2020 kubectl
-rwxr-xr-x. 1 root root 113283800 5月 20 2020 kubelet
-rwxr-xr-x. 1 root root 38379520 5月 20 2020 kube-proxy
-rw-r--r--. 1 root root 8 5月 20 2020 kube-proxy.docker_tag
-rw-------. 1 root root 119099392 5月 20 2020 kube-proxy.tar
-rwxr-xr-x. 1 root root 42950656 5月 20 2020 kube-scheduler
-rw-r--r--. 1 root root 8 5月 20 2020 kube-scheduler.docker_tag
-rw-------. 1 root root 96841216 5月 20 2020 kube-scheduler.tar
-rwxr-xr-x. 1 root root 1687552 5月 20 2020 mounter
[root@k8s-master bin]# cp -a kubelet kube-proxy /opt/kubernetes/bin/ # 本地拷贝
7.2 部署kubelet
7.2.1 创建kubelet配置文件
cat > /opt/kubernetes/cfg/kubelet.conf << EOF
KUBELET_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/opt/kubernetes/logs \\
--hostname-override=k8s-master \\
--network-plugin=cni \\
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\
--config=/opt/kubernetes/cfg/kubelet-config.yml \\
--cert-dir=/opt/kubernetes/ssl \\
--pod-infra-container-image=lizhenliang/pause-amd64:3.0"
EOF
注释
- –hostname-override：显示名称，集群中唯一
- –network-plugin：启用CNI
- –kubeconfig：空路径，会自动生成，后面用于连接apiserver
- –bootstrap-kubeconfig：首次启动向apiserver申请证书
- –config：配置参数文件
- –cert-dir：kubelet证书生成目录
- –pod-infra-container-image：管理Pod网络容器的镜像
执行配置文件
[root@k8s-master bin]# cat > /opt/kubernetes/cfg/kubelet.conf << EOF
> KUBELET_OPTS="--logtostderr=false \\
> --v=2 \\
> --log-dir=/opt/kubernetes/logs \\
> --hostname-override=k8s-master \\
> --network-plugin=cni \\
> --kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\
> --bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\
> --config=/opt/kubernetes/cfg/kubelet-config.yml \\
> --cert-dir=/opt/kubernetes/ssl \\
> --pod-infra-container-image=lizhenliang/pause-amd64:3.0"
> EOF
7.2.2 创建kubelet-config.yml配置文件
cat > /opt/kubernetes/cfg/kubelet-config.yml << EOF
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS:
- 10.0.0.2
clusterDomain: cluster.local
failSwapOn: false
authentication:
anonymous:
enabled: false
webhook:
cacheTTL: 2m0s
enabled: true
x509:
clientCAFile: /opt/kubernetes/ssl/ca.pem
authorization:
mode: Webhook
webhook:
cacheAuthorizedTTL: 5m0s
cacheUnauthorizedTTL: 30s
evictionHard:
imagefs.available: 15%
memory.available: 100Mi
nodefs.available: 10%
nodefs.inodesFree: 5%
maxOpenFiles: 1000000
maxPods: 110
EOF
执行配置文件
[root@k8s-master kubernetes]# cat > /opt/kubernetes/cfg/kubelet-config.yml << EOF
> kind: KubeletConfiguration
> apiVersion: kubelet.config.k8s.io/v1beta1
> address: 0.0.0.0
> port: 10250
> readOnlyPort: 10255
> cgroupDriver: cgroupfs
> clusterDNS:
> - 10.0.0.2
> clusterDomain: cluster.local
> failSwapOn: false
> authentication:
> anonymous:
> enabled: false
> webhook:
> cacheTTL: 2m0s
> enabled: true
> x509:
> clientCAFile: /opt/kubernetes/ssl/ca.pem
> authorization:
> mode: Webhook
> webhook:
> cacheAuthorizedTTL: 5m0s
> cacheUnauthorizedTTL: 30s
> evictionHard:
> imagefs.available: 15%
> memory.available: 100Mi
> nodefs.available: 10%
> nodefs.inodesFree: 5%
> maxOpenFiles: 1000000
> maxPods: 110
> EOF
7.2.3 生成bootstrap.kubeconfig文件
创建bootstrap-kubeconfig.sh脚本
[root@k8s-master kubernetes]# cd ~
[root@k8s-master ~]# ll
总用量 4
drwxr-xr-x. 2 root root 6 11月 17 20:39 -
-rw-------. 1 root root 1658 11月 11 05:16 anaconda-ks.cfg
drwxr-xr-x. 2 root root 6 11月 17 20:52 cfssl
drwxr-xr-x. 5 root root 46 11月 19 20:59 TLS
drwxr-xr-x. 4 root root 137 11月 19 21:46 tools
[root@k8s-master ~]# vim bootstrap-kubeconfig.sh
[root@k8s-master ~]# cat bootstrap-kubeconfig.sh
#!/bin/bash KUBE_APISERVER="https://192.168.0.201:6443" # apiserver IP:PORT
TOKEN="c47ffb939f5ca36231d9e3121a252940" # 与token.csv里保持一致 # 生成 kubelet bootstrap kubeconfig 配置文件
kubectl config set-cluster kubernetes \
--certificate-authority=/opt/kubernetes/ssl/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=bootstrap.kubeconfig
kubectl config set-credentials "kubelet-bootstrap" \
--token=${TOKEN} \
--kubeconfig=bootstrap.kubeconfig
kubectl config set-context default \
--cluster=kubernetes \
--user="kubelet-bootstrap" \
--kubeconfig=bootstrap.kubeconfig
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
执行脚本，生成bootstrap-kubeconfig配置文件
[root@k8s-master ~]# sh bootstrap-kubeconfig.sh
Cluster "kubernetes" set.
User "kubelet-bootstrap" set.
Context "default" created.
Switched to context "default".
[root@k8s-master ~]# ll
总用量 12
drwxr-xr-x. 2 root root 6 11月 17 20:39 -
-rw-------. 1 root root 1658 11月 11 05:16 anaconda-ks.cfg
-rw------- 1 root root 2167 11月 23 21:51 bootstrap.kubeconfig
-rw-r--r-- 1 root root 693 11月 23 21:50 bootstrap-kubeconfig.sh
drwxr-xr-x. 2 root root 6 11月 17 20:52 cfssl
drwxr-xr-x. 5 root root 46 11月 19 20:59 TLS
drwxr-xr-x. 4 root root 137 11月 19 21:46 tools
拷贝bootstrap.kubeconfig
[root@k8s-master ~]# cp -a bootstrap.kubeconfig /opt/kubernetes/cfg/
7.2.4 配置kubelet使用systemctl管理
cat > /usr/lib/systemd/system/kubelet.service << EOF
[Unit]
Description=Kubernetes Kubelet
After=docker.service
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet.conf
ExecStart=/opt/kubernetes/bin/kubelet \$KUBELET_OPTS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
执行配置文件
[root@k8s-master ~]# cat > /usr/lib/systemd/system/kubelet.service << EOF
> [Unit]
> Description=Kubernetes Kubelet
> After=docker.service
> [Service]
> EnvironmentFile=/opt/kubernetes/cfg/kubelet.conf
> ExecStart=/opt/kubernetes/bin/kubelet \$KUBELET_OPTS
> Restart=on-failure
> LimitNOFILE=65536
> [Install]
> WantedBy=multi-user.target
> EOF
7.2.5 启动并设置开机启动
systemctl daemon-reload
systemctl start kubelet
systemctl enable kubelet
执行启动
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start kubelet
[root@k8s-master ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
7.3 批准kubelet证书申请并加入集群
# 查看kubelet证书请求
[root@k8s-master ~]# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR CONDITION
node-csr-EDYoKN4sH6vlVUx7HrCH7i1lBMDTqNiTx9oRU3e3xM4 2m4s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Pending
# 批准申请
[root@k8s-master ~]# kubectl certificate approve node-csr-EDYoKN4sH6vlVUx7HrCH7i1lBMDTqNiTx9oRU3e3xM4
certificatesigningrequest.certificates.k8s.io/node-csr-EDYoKN4sH6vlVUx7HrCH7i1lBMDTqNiTx9oRU3e3xM4 approved
# 查看节点
[root@k8s-master ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master NotReady <none> 17s v1.18.3
7.4 部署kube-proxy
7.4.1 创建kube-proxy配置文件
cat > /opt/kubernetes/cfg/kube-proxy.conf << EOF
KUBE_PROXY_OPTS="--logtostderr=false \\
--v=2 \\
--log-dir=/opt/kubernetes/logs \\
--config=/opt/kubernetes/cfg/kube-proxy-config.yml"
EOF
执行配置
[root@k8s-master ~]# cat > /opt/kubernetes/cfg/kube-proxy.conf << EOF
> KUBE_PROXY_OPTS="--logtostderr=false \\
> --v=2 \\
> --log-dir=/opt/kubernetes/logs \\
> --config=/opt/kubernetes/cfg/kube-proxy-config.yml"
> EOF
7.4.2 配置kube-proxy-config文件
cat > /opt/kubernetes/cfg/kube-proxy-config.yml << EOF
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 0.0.0.0
metricsBindAddress: 0.0.0.0:10249
clientConnection:
kubeconfig: /opt/kubernetes/cfg/kube-proxy.kubeconfig
hostnameOverride: k8s-master
clusterCIDR: 10.0.0.0/24
EOF
执行配置
[root@k8s-master ~]# cat > /opt/kubernetes/cfg/kube-proxy-config.yml << EOF
> kind: KubeProxyConfiguration
> apiVersion: kubeproxy.config.k8s.io/v1alpha1
> bindAddress: 0.0.0.0
> metricsBindAddress: 0.0.0.0:10249
> clientConnection:
> kubeconfig: /opt/kubernetes/cfg/kube-proxy.kubeconfig
> hostnameOverride: k8s-master
> clusterCIDR: 10.0.0.0/24
> EOF
7.4.3 生成kube-proxy证书
#切换到apiserver的目录下
[root@k8s-master ~]# cd /root/TLS/apiserver/
# 创建证书请求文件
cat > kube-proxy-csr.json << EOF
{
"CN": "system:kube-proxy",
"hosts": [],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "BeiJing",
"ST": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
# 生成证书
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
# 查看证书
ls kube-proxy*pem
执行配置
[root@k8s-master ~]# cd /root/TLS/apiserver/
[root@k8s-master apiserver]# ll
总用量 36
-rw-r--r--. 1 root root 294 11月 19 21:00 ca-config.json
-rw-r--r--. 1 root root 1001 11月 19 21:02 ca.csr
-rw-r--r--. 1 root root 264 11月 19 21:00 ca-csr.json
-rw-------. 1 root root 1675 11月 19 21:02 ca-key.pem
-rw-r--r--. 1 root root 1359 11月 19 21:02 ca.pem
-rw-r--r--. 1 root root 1261 11月 19 21:16 server.csr
-rw-r--r--. 1 root root 557 11月 19 21:10 server-csr.json
-rw-------. 1 root root 1679 11月 19 21:16 server-key.pem
-rw-r--r--. 1 root root 1627 11月 19 21:16 server.pem
[root@k8s-master apiserver]# cat > kube-proxy-csr.json << EOF
> {
> "CN": "system:kube-proxy",
> "hosts": [],
> "key": {
> "algo": "rsa",
> "size": 2048
> },
> "names": [
> {
> "C": "CN",
> "L": "BeiJing",
> "ST": "BeiJing",
> "O": "k8s",
> "OU": "System"
> }
> ]
> }
> EOF
执行证书生成命令
[root@k8s-master apiserver]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
2020/11/23 22:16:56 [INFO] generate received request
2020/11/23 22:16:56 [INFO] received CSR
2020/11/23 22:16:56 [INFO] generating key: rsa-2048
2020/11/23 22:16:57 [INFO] encoded CSR
2020/11/23 22:16:57 [INFO] signed certificate with serial number 135691991395151702368398150414714985360518061883
2020/11/23 22:16:57 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
查看证书
[root@k8s-master apiserver]# ls kube-proxy*pem
kube-proxy-key.pem kube-proxy.pem
7.4.4 生成kubeconfig配置文件
创建kubeconfig.sh脚本
[root@k8s-master ~]# vim kubeconfig.sh
[root@k8s-master ~]# cat kubeconfig.sh
#!/bin/bash KUBE_APISERVER="https://192.168.0.201:6443" #修改本地ip地址 kubectl config set-cluster kubernetes \
--certificate-authority=/opt/kubernetes/ssl/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=kube-proxy.kubeconfig
kubectl config set-credentials kube-proxy \
--client-certificate=./kube-proxy.pem \
--client-key=./kube-proxy-key.pem \
--embed-certs=true \
--kubeconfig=kube-proxy.kubeconfig
kubectl config set-context default \
--cluster=kubernetes \
--user=kube-proxy \
--kubeconfig=kube-proxy.kubeconfig
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig执行脚本
[root@k8s-master ~]# sh kubeconfig.sh
Cluster "kubernetes" set.
error: error reading client-certificate data from ./kube-proxy.pem: open ./kube-proxy.pem: no such file or directory
Context "default" created.
Switched to context "default".
拷贝配置文件kube-proxy.kubeconfig
[root@k8s-master ~]# cp -a kube-proxy.kubeconfig /opt/kubernetes/cfg/
7.4.5 配置systemctl管理kube-proxy
cat > /usr/lib/systemd/system/kube-proxy.service << EOF
[Unit]
Description=Kubernetes Proxy
After=network.target
[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-proxy.conf
ExecStart=/opt/kubernetes/bin/kube-proxy \$KUBE_PROXY_OPTS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
执行配置
[root@k8s-master ~]# cat > /usr/lib/systemd/system/kube-proxy.service << EOF
> [Unit]
> Description=Kubernetes Proxy
> After=network.target
> [Service]
> EnvironmentFile=/opt/kubernetes/cfg/kube-proxy.conf
> ExecStart=/opt/kubernetes/bin/kube-proxy \$KUBE_PROXY_OPTS
> Restart=on-failure
> LimitNOFILE=65536
> [Install]
> WantedBy=multi-user.target
> EOF
7.4.6 启动并设置开机启动
systemctl daemon-reload
systemctl start kube-proxy
systemctl enable kube-proxy
执行启动并设置开机启动
[root@k8s-master ~]# systemctl daemon-reload
[root@k8s-master ~]# systemctl start kube-proxy
[root@k8s-master ~]# systemctl enable kube-proxy
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-proxy.service to /usr/lib/systemd/system/kube-proxy.service.
7.5 部署CNI网络
7.5.1 下载CNI二进制文件
[root@k8s-master ~]# cd /root/tools/
[root@k8s-master tools]# ll
总用量 372092
drwxr-xr-x. 3 630384594 600260513 96 11月 19 13:59 etcd-v3.4.9-linux-amd64
-rw-r--r--. 1 root root 17364053 11月 17 21:09 etcd-v3.4.9-linux-amd64.tar.gz
drwxr-xr-x. 4 root root 79 5月 20 2020 kubernetes
-rw-r--r--. 1 root root 363654483 11月 19 21:41 kubernetes-server-linux-amd64.tar.gz
[root@k8s-master tools]# wget https://github.com/containernetworking/plugins/releases/download/v0.8.6/cni-plugins-linux-amd64-v0.8.6.tgz
[root@k8s-master tools]# ll
总用量 408108
-rw-r--r-- 1 root root 36878412 11月 24 12:55 cni-plugins-linux-amd64-v0.8.6.tgz
drwxr-xr-x. 3 630384594 600260513 96 11月 19 13:59 etcd-v3.4.9-linux-amd64
-rw-r--r--. 1 root root 17364053 11月 17 21:09 etcd-v3.4.9-linux-amd64.tar.gz
drwxr-xr-x. 4 root root 79 5月 20 2020 kubernetes
-rw-r--r--. 1 root root 363654483 11月 19 21:41 kubernetes-server-linux-amd64.tar.gz
7.5.2 解压二进制包并移动到默认工作目录：
[root@k8s-master tools]# mkdir -p /opt/cni/bin
[root@k8s-master tools]# tar -zxvf cni-plugins-linux-amd64-v0.8.6.tgz -C /opt/cni/bin/
./
./flannel
./ptp
./host-local
./firewall
./portmap
./tuning
./vlan
./host-device
./bandwidth
./sbr
./static
./dhcp
./ipvlan
./macvlan
./loopback
./bridge
7.5.3 部署CNI网络：
[root@k8s-master tools]# cd /root
[root@k8s-master ~]# wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
[root@k8s-master ~]# sed -i -r "s#quay.io/coreos/flannel:.*-amd64#lizhenliang/flannel:v0.12.0-amd64#g" kube-flannel.yml
- 注释：默认镜像地址无法访问，修改为docker hub镜像仓库
# 部署插件
kubectl apply -f kube-flannel.yml
# 查询插件
kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
kube-flannel-ds-amd64-2pc95 1/1 Running 0 72s
# 查询node
kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master Ready <none> 41m v1.18.3
部署好网络插件，Node准备就绪。
7.6 授权apiserver 访问kubelet
cat > apiserver-to-kubelet-rbac.yaml << EOF
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:kube-apiserver-to-kubelet
rules:
- apiGroups:
- ""
resources:
- nodes/proxy
- nodes/stats
- nodes/log
- nodes/spec
- nodes/metrics
- pods/log
verbs:
- "*"
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: system:kube-apiserver
namespace: ""
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:kube-apiserver-to-kubelet
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: User
name: kubernetes
EOF
# 执行配置文件
kubectl apply -f apiserver-to-kubelet-rbac.yaml
执行配置文件
[root@k8s-master ~]# cat > apiserver-to-kubelet-rbac.yaml << EOF
> apiVersion: rbac.authorization.k8s.io/v1
> kind: ClusterRole
> metadata:
> annotations:
> rbac.authorization.kubernetes.io/autoupdate: "true"
> labels:
> kubernetes.io/bootstrapping: rbac-defaults
> name: system:kube-apiserver-to-kubelet
> rules:
> - apiGroups:
> - ""
> resources:
> - nodes/proxy
> - nodes/stats
> - nodes/log
> - nodes/spec
> - nodes/metrics
> - pods/log
> verbs:
> - "*"
> ---
> apiVersion: rbac.authorization.k8s.io/v1
> kind: ClusterRoleBinding
> metadata:
> name: system:kube-apiserver
> namespace: ""
> roleRef:
> apiGroup: rbac.authorization.k8s.io
> kind: ClusterRole
> name: system:kube-apiserver-to-kubelet
> subjects:
> - apiGroup: rbac.authorization.k8s.io
> kind: User
> name: kubernetes
> EOF
执行配置文件生成
[root@k8s-master ~]# kubectl apply -f apiserver-to-kubelet-rbac.yaml
clusterrole.rbac.authorization.k8s.io/system:kube-apiserver-to-kubelet created
clusterrolebinding.rbac.authorization.k8s.io/system:kube-apiserver created
7.7 新增加worker node
7.7.1 拷贝已部署好的node相关文件到新节点
[root@k8s-master ~]# scp -r /opt/kubernetes root@192.168.0.202:/opt
[root@k8s-master ~]# scp -r /usr/lib/systemd/system/{kubelet,kube-proxy}.service root@192.168.0.202:/usr/lib/systemd/system
[root@k8s-master ~]# scp -r /opt/kubernetes root@192.168.0.203:/opt
[root@k8s-master ~]# scp -r /usr/lib/systemd/system/{kubelet,kube-proxy}.service root@192.168.0.203:/usr/lib/systemd/system
7.7.2 删除kubelet证书和kubeconfig文件
[root@k8s-node1 ~]# rm -f /opt/kubernetes/cfg/kubelet.kubeconfig
[root@k8s-node1 ~]# rm -f /opt/kubernetes/ssl/kubelet*
[root@k8s-node2 ~]# rm -f /opt/kubernetes/cfg/kubelet.kubeconfig
[root@k8s-node2 ~]# rm -f /opt/kubernetes/ssl/kubelet*
7.7.3 修改主机名
[root@k8s-node1 ~]# vim /opt/kubernetes/cfg/kubelet.conf
[root@k8s-node1 ~]# cat /opt/kubernetes/cfg/kubelet.conf
--hostname-override=k8s-master
# 把上面的修改为下面这种
--hostname-override=k8s-node1
[root@k8s-node2 ~]# vim /opt/kubernetes/cfg/kubelet.conf
[root@k8s-node2 ~]# cat /opt/kubernetes/cfg/kubelet.conf
--hostname-override=k8s-master
# 把上面的修改为下面这种
--hostname-override=k8s-node2
7.7.4 启动并设置开机启动，在两台node都的执行
systemctl daemon-reload
systemctl start kubelet
systemctl enable kubelet
systemctl start kube-proxy
systemctl enable kube-proxy
在k8s-node1上执行
[root@k8s-node1 ~]# systemctl daemon-reload
[root@k8s-node1 ~]# systemctl start kubelet
[root@k8s-node1 ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@k8s-node1 ~]# systemctl start kube-proxy
[root@k8s-node1 ~]# systemctl enable kube-proxy
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-proxy.service to /usr/lib/systemd/system/kube-proxy.service.
在k8s-node2上执行
[root@k8s-node2 ~]# systemctl daemon-reload
[root@k8s-node2 ~]# systemctl start kubelet
[root@k8s-node2 ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@k8s-node2 ~]# systemctl start kube-proxy
[root@k8s-node2 ~]# systemctl enable kube-proxy
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-proxy.service to /usr/lib/systemd/system/kube-proxy.service.
7.7.5 在master上批准新node kubelet证书申请
# 查看kubelet证书申请
[root@k8s-master ~]# kubectl get csr
NAME AGE SIGNERNAME REQUESTOR CONDITION
node-csr-dtumcoSnXgyUaZCgSflcsFXHx4dkXLwN9RHZispUKb8 34s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Pending
node-csr-oLimBxMuWXYX0e0o0ddQ66n4er3niq7hRWHF7NXx6b8 28s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Pending
# 批准申请
[root@k8s-master ~]# kubectl certificate approve node-csr-dtumcoSnXgyUaZCgSflcsFXHx4dkXLwN9RHZispUKb8
certificatesigningrequest.certificates.k8s.io/node-csr-dtumcoSnXgyUaZCgSflcsFXHx4dkXLwN9RHZispUKb8 approved
[root@k8s-master ~]# kubectl certificate approve node-csr-oLimBxMuWXYX0e0o0ddQ66n4er3niq7hRWHF7NXx6b8
certificatesigningrequest.certificates.k8s.io/node-csr-oLimBxMuWXYX0e0o0ddQ66n4er3niq7hRWHF7NXx6b8 approved
# 查询node节点
[root@k8s-master ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master Ready <none> 20h v1.18.3
k8s-node1 NotReady <none> 32s v1.18.3
k8s-node2 NotReady <none> 19s v1.18.3
8. 部署dashboard图像化管理
8.1 下载 dashboard图像化管理包
二进制方法-部署k8s集群部署1.18版本的更多相关文章
- Ansible自动化部署K8S集群
Ansible自动化部署K8S集群 1.1 Ansible介绍 Ansible是一种IT自动化工具.它可以配置系统,部署软件以及协调更高级的IT任务,例如持续部署,滚动更新.Ansible适用于管理企 ...
- 使用kubeadm部署k8s集群[v1.18.0]
使用kubeadm部署k8s集群 环境 IP地址 主机名 节点 10.0.0.63 k8s-master1 master1 10.0.0.63 k8s-master2 master2 10.0.0.6 ...
- 国内k8s集群部署的几种方式
版权声明:本文为博主原创文章,未经博主允许不得转载. https://blog.csdn.net/lusyoe/article/details/80217291前言总所周知,由于某种原因,通过官方的方 ...
- Kubernetes(k8s)集群部署（k8s企业级Docker容器集群管理）系列之自签TLS证书及Etcd集群部署（二）
0.前言 整体架构目录:ASP.NET Core分布式项目实战-目录 k8s架构目录:Kubernetes(k8s)集群部署(k8s企业级Docker容器集群管理)系列目录 一.服务器设置 1.把每一 ...
- Kubernetes(k8s)集群部署（k8s企业级Docker容器集群管理）系列之flanneld网络介绍及部署（三）
0.前言 整体架构目录:ASP.NET Core分布式项目实战-目录 k8s架构目录:Kubernetes(k8s)集群部署(k8s企业级Docker容器集群管理)系列目录 一.flanneld介绍 ...
- 在k8s集群部署SonarQube
目录 1.2.存储环境 1.3.sonarqube版本 2.部署sonarqube 2.1.部署PostgreSQL 2.2.部署SonarQube 2.3.访问检查 SonarQube 是一款用于代 ...
- 二进制部署K8S-2集群部署
二进制部署K8S-2集群部署 感谢老男孩教育王导的公开视频,文档整理自https://www.yuque.com/duduniao/k8s. 因为在后期运行容器需要有大量的物理硬件资源使用的环境是用的 ...
- k8s集群部署（2）
一.利用ansible部署kubernetes准备阶段 1.集群介绍 基于二进制方式部署k8s集群和利用ansible-playbook实现自动化:二进制方式部署有助于理解系统各组件的交互原理和熟悉组 ...
- Kubernetes(k8s)集群部署（k8s企业级Docker容器集群管理）系列目录
0.目录 整体架构目录:ASP.NET Core分布式项目实战-目录 k8s架构目录:Kubernetes(k8s)集群部署(k8s企业级Docker容器集群管理)系列目录 一.感谢 在此感谢.net ...
随机推荐
- .NET 云原生架构师训练营（模块二 基础巩固 消息队列 介绍与基础）--学习笔记
2.6.1 消息队列 -- 介绍 主要使用场景 队列的三种形式 消息队列的优点 主要使用场景 典型的异步处理 流量削锋 应用解耦 队列的三种形式 点对点 工作队列 发布与订阅 消息队列的优点 1.屏蔽 ...
- AtCoder Beginner Contest 188 F - +1-1x2 思维题
题目描述 给你两个数 \(x\),\(y\) 可以对 \(x\) 进行 \(+1,-1\) 或 \(\times 2\) 的操作 问最少操作多少次后变为 \(y\) \(x,y \leq 10^{18 ...
- 【C++】《C++ Primer 》第十章
第十章 泛型算法 一.概述 因为它们实现共同的操作,所以称之为"算法".而"泛型",指的是它们可以操作在多种容器类型上. 泛型算法并不直接操作容器,而是遍历由两 ...
- 【JS学习】var let const声明变量的异同点
[JS学习]var let const声明变量的异同点 前言: 本博客系列为学习后盾人js教程过程中的记录与产出,如果对你有帮助,欢迎关注,点赞,分享.不足之处也欢迎指正,作者会积极思考与改正. 总述 ...
- linux中进制转换
方式一:使用$[]或$(()) 格式为:$[base#number]或$((base#number)),其中base为进制,number为对应进制数. 这种方式输入2进制.16进制等,但只能输出为10 ...
- 【葵花宝典】kolla部署OpenStack-AllinOne
1.关闭防火墙以及内核安全机制 systemctl stop firewalld systemctl disable firewalld ##永久性关闭 setenforce 0 sed -i 's/ ...
- SpringCloud Alibaba Nacos注册中心源码浅析
一.前置了解 1.1 简介 Nacos是一款阿里巴巴推出的一款微服务发现.配置管理框架.我们本次对将对它的服务注册发现功能进行简单源码分析. 1.2 流程 Nacos的分析分为两部分,一部分是我们的客 ...
- [已完结]CMU数据库(15-445)实验2-B+树索引实现(下）
4. Index_Iterator实现 这里就是需要实现迭代器的一些操作,比如begin.end.isend等等 下面是对于IndexIterator的构造函数 template <typena ...
- 离线安装docker-ce
1.用一台可以连外网的虚拟机把docker-ce安装包下载下来,vim /tmp/docker-download.sh #!/bin/bash set -e mkdir -p /apps/docker ...
- 冷饭新炒：理解JDK中UUID的底层实现
前提 UUID是Universally Unique IDentifier的缩写,翻译为通用唯一标识符或者全局唯一标识符.对于UUID的描述,下面摘录一下规范文件A Universally Uniqu ...