像职业选手样编码:地道Python
Code Like a Pythonista: Idiomatic Python
David Goodger
In this interactive tutorial, we'll cover many essential Python idioms and techniques in depth, adding immediately useful tools to your belt.
There are 3 versions of this presentation:
©2006-2008, licensed under a Creative Commons Attribution/Share-Alike (BY-SA) license.
My credentials: I am
- a resident of Montreal,
- father of two great kids, husband of one special woman,
- a full-time Python programmer,
- author of the Docutils project and reStructuredText,
- an editor of the Python Enhancement Proposals (or PEPs),
- an organizer of PyCon 2007, and chair of PyCon 2008,
- a member of the Python Software Foundation,
- a Director of the Foundation for the past year, and its Secretary.
In the tutorial I presented at PyCon 2006 (called Text & Data Processing), I was surprised at the reaction to some techniques I used that I had thought were common knowledge. But many of the attendees were unaware of these tools that experienced Python programmers use without thinking.
Many of you will have seen some of these techniques and idioms before. Hopefully you'll learn a few techniques that you haven't seen before and maybe something new about the ones you have already seen.
These are the guiding principles of Python, but are open to interpretation. A sense of humor is required for their proper interpretation.
If you're using a programming language named after a sketch comedy troupe, you had better have a sense of humor.
Beautiful is better than ugly.
Explicit is better than implicit.
Simple is better than complex.
Complex is better than complicated.
Flat is better than nested.
Sparse is better than dense.
Readability counts.
Special cases aren't special enough to break the rules.
Although practicality beats purity.
Errors should never pass silently.
Unless explicitly silenced.
...
In the face of ambiguity, refuse the temptation to guess.
There should be one—and preferably only one—obvious way to do it.
Although that way may not be obvious at first unless you're Dutch.
Now is better than never.
Although never is often better than right now.
If the implementation is hard to explain, it's a bad idea.
If the implementation is easy to explain, it may be a good idea.
Namespaces are one honking great idea—let's do more of those!
—Tim Peters
This particular "poem" began as a kind of a joke, but it really embeds a lot of truth about the philosophy behind Python. The Zen of Python has been formalized in PEP 20, where the abstract reads:
Long time Pythoneer Tim Peters succinctly channels the BDFL's guiding principles for Python's design into 20 aphorisms, only 19 of which have been written down.
—http://www.python.org/dev/peps/pep-0020/
You can decide for yourself if you're a "Pythoneer" or a "Pythonista". The terms have somewhat different connotations.
When in doubt:
import this
Try it in a Python interactive interpreter:
>>> import this
Here's another easter egg:
>>> from __future__ import braces
File "<stdin>", line 1
SyntaxError: not a chance
What a bunch of comedians! :-)
Coding Style: Readability Counts
Programs must be written for people to read, and only incidentally for machines to execute.
—Abelson & Sussman, Structure and Interpretation of Computer Programs
Try to make your programs easy to read and obvious.
PEP 8: Style Guide for Python Code
Worthwhile reading:
http://www.python.org/dev/peps/pep-0008/
PEP = Python Enhancement Proposal
A PEP is a design document providing information to the Python community, or describing a new feature for Python or its processes or environment.
The Python community has its own standards for what source code should look like, codified in PEP 8. These standards are different from those of other communities, like C, C++, C#, Java, VisualBasic, etc.
Because indentation and whitespace are so important in Python, the Style Guide for Python Code approaches a standard. It would be wise to adhere to the guide! Most open-source projects and (hopefully) in-house projects follow the style guide quite closely.
- 4 spaces per indentation level.
- No hard tabs.
- Never mix tabs and spaces.
This is exactly what IDLE and the Emacs Python mode support. Other editors may also provide this support.
- One blank line between functions.
- Two blank lines between classes.
- Add a space after "," in dicts, lists, tuples, & argument lists, and after ":" in dicts, but not before.
- Put spaces around assignments & comparisons (except in argument lists).
- No spaces just inside parentheses or just before argument lists.
- No spaces just inside docstrings.
def make_squares(key, value=0):
"""Return a dictionary and a list..."""
d = {key: value}
l = [key, value]
return d, l
- joined_lower for functions, methods, attributes
- joined_lower or ALL_CAPS for constants
- StudlyCaps for classes
- camelCase only to conform to pre-existing conventions
- Attributes: interface, _internal, __private
But try to avoid the __private form. I never use it. Trust me. If you use it, you WILL regret it later.
Explanation:
People coming from a C++/Java background are especially prone to overusing/misusing this "feature". But __private names don't work the same way as in Java or C++. They just trigger aname mangling whose purpose is to prevent accidental namespace collisions in subclasses: MyClass.__private just becomes MyClass._MyClass__private. (Note that even this breaks down for subclasses with the same name as the superclass, e.g. subclasses in different modules.) It is possible to access __private names from outside their class, just inconvenient and fragile (it adds a dependency on the exact name of the superclass).
The problem is that the author of a class may legitimately think "this attribute/method name should be private, only accessible from within this class definition" and use the __privateconvention. But later on, a user of that class may make a subclass that legitimately needs access to that name. So either the superclass has to be modified (which may be difficult or impossible), or the subclass code has to use manually mangled names (which is ugly and fragile at best).
There's a concept in Python: "we're all consenting adults here". If you use the __private form, who are you protecting the attribute from? It's the responsibility of subclasses to use attributes from superclasses properly, and it's the responsibility of superclasses to document their attributes properly.
It's better to use the single-leading-underscore convention, _internal. This isn't name mangled at all; it just indicates to others to "be careful with this, it's an internal implementation detail; don't touch it if you don't fully understand it". It's only a convention though.
There are some good explanations in the answers here:
Keep lines below 80 characters in length.
Use implied line continuation inside parentheses/brackets/braces:
def __init__(self, first, second, third,
fourth, fifth, sixth):
output = (first + second + third
+ fourth + fifth + sixth)
Use backslashes as a last resort:
VeryLong.left_hand_side \
= even_longer.right_hand_side()
Backslashes are fragile; they must end the line they're on. If you add a space after the backslash, it won't work any more. Also, they're ugly.
Adjacent literal strings are concatenated by the parser:
>>> print 'o' 'n' "e"
one
The spaces between literals are not required, but help with readability. Any type of quoting can be used:
>>> print 't' r'\/\/' """o"""
t\/\/o
The string prefixed with an "r" is a "raw" string. Backslashes are not evaluated as escapes in raw strings. They're useful for regular expressions and Windows filesystem paths.
Note named string objects are not concatenated:
>>> a = 'three'
>>> b = 'four'
>>> a b
File "<stdin>", line 1
a b
^
SyntaxError: invalid syntax
That's because this automatic concatenation is a feature of the Python parser/compiler, not the interpreter. You must use the "+" operator to concatenate strings at run time.
text = ('Long strings can be made up '
'of several shorter strings.')
The parentheses allow implicit line continuation.
Multiline strings use triple quotes:
"""Triple
double
quotes"""
'''\
Triple
single
quotes\
'''
In the last example above (triple single quotes), note how the backslashes are used to escape the newlines. This eliminates extra newlines, while keeping the text and quotes nicely left-justified. The backslashes must be at the end of their lines.
Good:
if foo == 'blah':
do_something()
do_one()
do_two()
do_three()
Bad:
if foo == 'blah': do_something()
do_one(); do_two(); do_three()
Whitespace & indentations are useful visual indicators of the program flow. The indentation of the second "Good" line above shows the reader that something's going on, whereas the lack of indentation in "Bad" hides the "if" statement.
Multiple statements on one line are a cardinal sin. In Python, readability counts.
Docstrings = How to use code
Comments = Why (rationale) & how code works
Docstrings explain how to use code, and are for the users of your code. Uses of docstrings:
- Explain the purpose of the function even if it seems obvious to you, because it might not be obvious to someone else later on.
- Describe the parameters expected, the return values, and any exceptions raised.
- If the method is tightly coupled with a single caller, make some mention of the caller (though be careful as the caller might change later).
Comments explain why, and are for the maintainers of your code. Examples include notes to yourself, like:
# !!! BUG: ...
# !!! FIX: This is a hack
# ??? Why is this here?
Both of these groups include you, so write good docstrings and comments!
Docstrings are useful in interactive use (help()) and for auto-documentation systems.
False comments & docstrings are worse than none at all. So keep them up to date! When you make changes, make sure the comments & docstrings are consistent with the code, and don't contradict it.
There's an entire PEP about docstrings, PEP 257, "Docstring Conventions":
http://www.python.org/dev/peps/pep-0257/
A foolish consistency is the hobgoblin of little minds.
—Ralph Waldo Emerson
(hobgoblin: Something causing superstitious fear; a bogy.)
There are always exceptions. From PEP 8:
But most importantly: know when to be inconsistent -- sometimes the style guide just doesn't apply. When in doubt, use your best judgment. Look at other examples and decide what looks best. And don't hesitate to ask!
Two good reasons to break a particular rule:
- When applying the rule would make the code less readable, even for someone who is used to reading code that follows the rules.
- To be consistent with surrounding code that also breaks it (maybe for historic reasons) -- although this is also an opportunity to clean up someone else's mess (in true XP style).
... but practicality shouldn't beat purity to a pulp!
A selection of small, useful idioms.
Now we move on to the meat of the tutorial: lots of idioms.
We'll start with some easy ones and work our way up.
In other languages:
temp = a
a = b
b = temp
In Python:
b, a = a, b
Perhaps you've seen this before. But do you know how it works?
- The comma is the tuple constructor syntax.
- A tuple is created on the right (tuple packing).
- A tuple is the target on the left (tuple unpacking).
The right-hand side is unpacked into the names in the tuple on the left-hand side.
Further examples of unpacking:
>>> l =['David', 'Pythonista', '+1-514-555-1234']
>>> name, title, phone = l
>>> name
'David'
>>> title
'Pythonista'
>>> phone
'+1-514-555-1234'
Useful in loops over structured data:
l (L) above is the list we just made (David's info). So people is a list containing two items, each a 3-item list.
>>> people = [l, ['Guido', 'BDFL', 'unlisted']]
>>> for (name, title, phone) in people:
... print name, phone
...
David +1-514-555-1234
Guido unlisted
Each item in people is being unpacked into the (name, title, phone) tuple.
Arbitrarily nestable (just be sure to match the structure on the left & right!):
>>> david, (gname, gtitle, gphone) = people
>>> gname
'Guido'
>>> gtitle
'BDFL'
>>> gphone
'unlisted'
>>> david
['David', 'Pythonista', '+1-514-555-1234']
We saw that the comma is the tuple constructor, not the parentheses. Example:
>>> 1,
(1,)
The Python interpreter shows the parentheses for clarity, and I recommend you use parentheses too:
>>> (1,)
(1,)
Don't forget the comma!
>>> (1)
1
In a one-tuple, the trailing comma is required; in 2+-tuples, the trailing comma is optional. In 0-tuples, or empty tuples, a pair of parentheses is the shortcut syntax:
>>> ()
()
>>> tuple()
()
A common typo is to leave a comma even though you don't want a tuple. It can be easy to miss in your code:
>>> value = 1,
>>> value
(1,)
So if you see a tuple where you don't expect one, look for a comma!
This is a really useful feature that surprisingly few people know.
In the interactive interpreter, whenever you evaluate an expression or call a function, the result is bound to a temporary name, _ (an underscore):
>>> 1 + 1
2
>>> _
2
_ stores the last printed expression.
When a result is None, nothing is printed, so _ doesn't change. That's convenient!
This only works in the interactive interpreter, not within a module.
It is especially useful when you're working out a problem interactively, and you want to store the result for a later step:
>>> import math
>>> math.pi / 3
1.0471975511965976
>>> angle = _
>>> math.cos(angle)
0.50000000000000011
>>> _
0.50000000000000011
Building Strings from Substrings
Start with a list of strings:
colors = ['red', 'blue', 'green', 'yellow']
We want to join all the strings together into one large string. Especially when the number of substrings is large...
Don't do this:
result = ''
for s in colors:
result += s
This is very inefficient.
It has terrible memory usage and performance patterns. The "summation" will compute, store, and then throw away each intermediate step.
Instead, do this:
result = ''.join(colors)
The join() string method does all the copying in one pass.
When you're only dealing with a few dozen or hundred strings, it won't make much difference. But get in the habit of building strings efficiently, because with thousands or with loops, it will make a difference.
Building Strings, Variations 1
Here are some techniques to use the join() string method.
If you want spaces between your substrings:
result = ' '.join(colors)
Or commas and spaces:
result = ', '.join(colors)
Here's a common case:
colors = ['red', 'blue', 'green', 'yellow']
print 'Choose', ', '.join(colors[:-1]), \
'or', colors[-1]
To make a nicely grammatical sentence, we want commas between all but the last pair of values, where we want the word "or". The slice syntax does the job. The "slice until -1" ([:-1]) gives all but the last value, which we join with comma-space.
Of course, this code wouldn't work with corner cases, lists of length 0 or 1.
Output:
Choose red, blue, green or yellow
Building Strings, Variations 2
If you need to apply a function to generate the substrings:
result = ''.join(fn(i) for i in items)
This involves a generator expression, which we'll cover later.
If you need to compute the substrings incrementally, accumulate them in a list first:
items = []
...
items.append(item) # many times
...
# items is now complete
result = ''.join(fn(i) for i in items)
We accumulate the parts in a list so that we can apply the join string method, for efficiency.
Good:
for key in d:
print key
- in is generally faster.
- This pattern also works for items in arbitrary containers (such as lists, tuples, and sets).
- in is also an operator (as we'll see).
Bad:
for key in d.keys():
print key
This is limited to objects with a keys() method.
But .keys() is necessary when mutating the dictionary:
for key in d.keys():
d[str(key)] = d[key]
d.keys() creates a static list of the dictionary keys. Otherwise, you'll get an exception "RuntimeError: dictionary changed size during iteration".
For consistency, use key in dict, not dict.has_key():
# do this:
if key in d:
...do something with d[key]
# not this:
if d.has_key(key):
...do something with d[key]
This usage of in is as an operator.
We often have to initialize dictionary entries before use:
This is the naïve way to do it:
navs = {}
for (portfolio, equity, position) in data:
if portfolio not in navs:
navs[portfolio] = 0
navs[portfolio] += position * prices[equity]
dict.get(key, default) removes the need for the test:
navs = {}
for (portfolio, equity, position) in data:
navs[portfolio] = (navs.get(portfolio, 0)
+ position * prices[equity])
Much more direct.
Dictionary setdefault Method (1)
Here we have to initialize mutable dictionary values. Each dictionary value will be a list. This is the naïve way:
Initializing mutable dictionary values:
equities = {}
for (portfolio, equity) in data:
if portfolio in equities:
equities[portfolio].append(equity)
else:
equities[portfolio] = [equity]
dict.setdefault(key, default) does the job much more efficiently:
equities = {}
for (portfolio, equity) in data:
equities.setdefault(portfolio, []).append(
equity)
dict.setdefault() is equivalent to "get, or set & get". Or "set if necessary, then get". It's especially efficient if your dictionary key is expensive to compute or long to type.
The only problem with dict.setdefault() is that the default value is always evaluated, whether needed or not. That only matters if the default value is expensive to compute.
If the default value is expensive to compute, you may want to use the defaultdict class, which we'll cover shortly.
Dictionary setdefault Method (2)
Here we see that the setdefault dictionary method can also be used as a stand-alone statement:
setdefault can also be used as a stand-alone statement:
navs = {}
for (portfolio, equity, position) in data:
navs.setdefault(portfolio, 0)
navs[portfolio] += position * prices[equity]
The setdefault dictionary method returns the default value, but we ignore it here. We're taking advantage of setdefault's side effect, that it sets the dictionary value only if there is no value already.
New in Python 2.5.
defaultdict is new in Python 2.5, part of the collections module. defaultdict is identical to regular dictionaries, except for two things:
- it takes an extra first argument: a default factory function; and
- when a dictionary key is encountered for the first time, the default factory function is called and the result used to initialize the dictionary value.
There are two ways to get defaultdict:
- import the collections module and reference it via the module,
➔
- or import the defaultdict name directly:
➔
import collections
d = collections.defaultdict(...)
from collections import defaultdict
d = defaultdict(...)
Here's the example from earlier, where each dictionary value must be initialized to an empty list, rewritten as with defaultdict:
from collections import defaultdict
equities = defaultdict(list)
for (portfolio, equity) in data:
equities[portfolio].append(equity)
There's no fumbling around at all now. In this case, the default factory function is list, which returns an empty list.
This is how to get a dictionary with default values of 0: use int as a default factory function:
navs = defaultdict(int)
for (portfolio, equity, position) in data:
navs[portfolio] += position * prices[equity]
You should be careful with defaultdict though. You cannot get KeyError exceptions from properly initialized defaultdict instances. You have to use a "key in dict" conditional if you need to check for the existence of a specific key.
Building & Splitting Dictionaries
Here's a useful technique to build a dictionary from two lists (or sequences): one list of keys, another list of values.
given = ['John', 'Eric', 'Terry', 'Michael']
family = ['Cleese', 'Idle', 'Gilliam', 'Palin']
pythons = dict(zip(given, family))
>>> pprint.pprint(pythons)
{'John': 'Cleese',
'Michael': 'Palin',
'Eric': 'Idle',
'Terry': 'Gilliam'}
The reverse, of course, is trivial:
>>> pythons.keys()
['John', 'Michael', 'Eric', 'Terry']
>>> pythons.values()
['Cleese', 'Palin', 'Idle', 'Gilliam']
Note that the order of the results of .keys() and .values() is different from the order of items when constructing the dictionary. The order going in is different from the order coming out. This is because a dictionary is inherently unordered. However, the order is guaranteed to be consistent (in other words, the order of keys will correspond to the order of values), as long as the dictionary isn't changed between calls.
# do this: # not this:
if x: if x == True:
pass pass
It's elegant and efficient to take advantage of the intrinsic truth values (or Boolean values) of Python objects.
Testing a list:
# do this: # not this:
if items: if len(items) != 0:
pass pass
# and definitely not this:
if items != []:
pass
The True and False names are built-in instances of type bool, Boolean values. Like None, there is only one instance of each.
False |
True |
False (== 0) |
True (== 1) |
"" (empty string) |
any string but "" (" ", "anything") |
0, 0.0 |
any number but 0 (1, 0.1, -1, 3.14) |
[], (), {}, set() |
any non-empty container ([0], (None,),['']) |
None |
almost any object that's not explicitly False |
Example of an object's truth value:
>>> class C:
... pass
...
>>> o = C()
>>> bool(o)
True
>>> bool(C)
True
(Examples: execute truth.py.)
To control the truth value of instances of a user-defined class, use the __nonzero__ or __len__ special methods. Use __len__ if your class is a container which has a length:
class MyContainer(object):
def __init__(self, data):
self.data = data
def __len__(self):
"""Return my length."""
return len(self.data)
If your class is not a container, use __nonzero__:
class MyClass(object):
def __init__(self, value):
self.value = value
def __nonzero__(self):
"""Return my truth value (True or False)."""
# This could be arbitrarily complex:
return bool(self.value)
In Python 3.0, __nonzero__ has been renamed to __bool__ for consistency with the bool built-in type. For compatibility, add this to the class definition:
__bool__ = __nonzero__
Here's a cute way to save some typing if you need a list of words:
>>> items = 'zero one two three'.split()
>>> print items
['zero', 'one', 'two', 'three']
Say we want to iterate over the items, and we need both the item's index and the item itself:
- or -
i = 0
for item in items: for i in range(len(items)):
print i, item print i, items[i]
i += 1
The enumerate function takes a list and returns (index, item) pairs:
>>> print list(enumerate(items))
[(0, 'zero'), (1, 'one'), (2, 'two'), (3, 'three')]
We need use a list wrapper to print the result because enumerate is a lazy function: it generates one item, a pair, at a time, only when required. A for loop is one place that requires one result at a time. enumerate is an example of a generator, which we'll cover in greater detail later. print does not take one result at a time -- we want the entire result, so we have to explicitly convert the generator into a list when we print it.
Our loop becomes much simpler:
for (index, item) in enumerate(items):
print index, item
# compare: # compare:
index = 0 for i in range(len(items)):
for item in items: print i, items[i]
print index, item
index += 1
The enumerate version is much shorter and simpler than the version on the left, and much easier to read and understand than either.
An example showing how the enumerate function actually returns an iterator (a generator is a kind of iterator):
>>> enumerate(items)
<enumerate object at 0x011EA1C0>
>>> e = enumerate(items)
>>> e.next()
(0, 'zero')
>>> e.next()
(1, 'one')
>>> e.next()
(2, 'two')
>>> e.next()
(3, 'three')
>>> e.next()
Traceback (most recent call last):
File "<stdin>", line 1, in ?
StopIteration
Other languages have "variables"
In many other languages, assigning to a variable puts a value into a box.
int a = 1; |
Box "a" now contains an integer 1.
Assigning another value to the same variable replaces the contents of the box:
a = 2; |
Now box "a" contains an integer 2.
Assigning one variable to another makes a copy of the value and puts it in the new box:
int b = a; |
"b" is a second box, with a copy of integer 2. Box "a" has a separate copy.
In Python, a "name" or "identifier" is like a parcel tag (or nametag) attached to an object.
a = 1 |
Here, an integer 1 object has a tag labelled "a".
If we reassign to "a", we just move the tag to another object:
a = 2 |
Now the name "a" is attached to an integer 2 object.
The original integer 1 object no longer has a tag "a". It may live on, but we can't get to it through the name "a". (When an object has no more references or tags, it is removed from memory.)
If we assign one name to another, we're just attaching another nametag to an existing object:
b = a |
The name "b" is just a second tag bound to the same object as "a".
Although we commonly refer to "variables" even in Python (because it's common terminology), we really mean "names" or "identifiers". In Python, "variables" are nametags for values, not labelled boxes.
If you get nothing else out of this tutorial, I hope you understand how Python names work. A good understanding is certain to pay dividends, helping you to avoid cases like this:
➔
This is a common mistake that beginners often make. Even more advanced programmers make this mistake if they don't understand Python names.
def bad_append(new_item, a_list=[]):
a_list.append(new_item)
return a_list
The problem here is that the default value of a_list, an empty list, is evaluated at function definition time. So every time you call the function, you get the same default value. Try it several times:
>>> print bad_append('one')
['one']
>>> print bad_append('two')
['one', 'two']
Lists are a mutable objects; you can change their contents. The correct way to get a default list (or dictionary, or set) is to create it at run time instead, inside the function:
def good_append(new_item, a_list=None):
if a_list is None:
a_list = []
a_list.append(new_item)
return a_list
Python's % operator works like C's sprintf function.
Although if you don't know C, that's not very helpful. Basically, you provide a template or format and interpolation values.
In this example, the template contains two conversion specifications: "%s" means "insert a string here", and "%i" means "convert an integer to a string and insert here". "%s" is particularly useful because it uses Python's built-in str() function to to convert any object to a string.
The interpolation values must match the template; we have two values here, a tuple.
name = 'David'
messages = 3
text = ('Hello %s, you have %i messages'
% (name, messages))
print text
Output:
Hello David, you have 3 messages
Details are in the Python Library Reference, section 2.3.6.2, "String Formatting Operations". Bookmark this one!
If you haven't done it already, go to python.org, download the HTML documentation (in a .zip file or a tarball), and install it on your machine. There's nothing like having the definitive resource at your fingertips.
What many people don't realize is that there are other, more flexible ways to do string formatting:
By name with a dictionary:
values = {'name': name, 'messages': messages}
print ('Hello %(name)s, you have %(messages)i '
'messages' % values)
Here we specify the names of interpolation values, which are looked up in the supplied dictionary.
Notice any redundancy? The names "name" and "messages" are already defined in the local namespace. We can take advantage of this.
By name using the local namespace:
print ('Hello %(name)s, you have %(messages)i '
'messages' % locals())
The locals() function returns a dictionary of all locally-available names.
This is very powerful. With this, you can do all the string formatting you want without having to worry about matching the interpolation values to the template.
But power can be dangerous. ("With great power comes great responsibility.") If you use the locals() form with an externally-supplied template string, you expose your entire local namespace to the caller. This is just something to keep in mind.
To examine your local namespace:
>>> from pprint import pprint
>>> pprint(locals())
pprint is a very useful module. If you don't know it already, try playing with it. It makes debugging your data structures much easier!
The namespace of an object's instance attributes is just a dictionary, self.__dict__.
By name using the instance namespace:
print ("We found %(error_count)d errors"
% self.__dict__)
Equivalent to, but more flexible than:
print ("We found %d errors"
% self.error_count)
Note: Class attributes are in the class __dict__. Namespace lookups are actually chained dictionary lookups.
List comprehensions ("listcomps" for short) are syntax shortcuts for this general pattern:
The traditional way, with for and if statements:
new_list = []
for item in a_list:
if condition(item):
new_list.append(fn(item))
As a list comprehension:
new_list = [fn(item) for item in a_list
if condition(item)]
Listcomps are clear & concise, up to a point. You can have multiple for-loops and if-conditions in a listcomp, but beyond two or three total, or if the conditions are complex, I suggest that regularfor loops should be used. Applying the Zen of Python, choose the more readable way.
For example, a list of the squares of 0–9:
>>> [n ** 2 for n in range(10)]
[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]
A list of the squares of odd 0–9:
>>> [n ** 2 for n in range(10) if n % 2]
[1, 9, 25, 49, 81]
Let's sum the squares of the numbers up to 100:
As a loop:
total = 0
for num in range(1, 101):
total += num * num
We can use the sum function to quickly do the work for us, by building the appropriate sequence.
As a list comprehension:
total = sum([num * num for num in range(1, 101)])
As a generator expression:
total = sum(num * num for num in xrange(1, 101))
Generator expressions ("genexps") are just like list comprehensions, except that where listcomps are greedy, generator expressions are lazy. Listcomps compute the entire result list all at once, as a list. Generator expressions compute one value at a time, when needed, as individual values. This is especially useful for long sequences where the computed list is just an intermediate step and not the final result.
In this case, we're only interested in the sum; we don't need the intermediate list of squares. We use xrange for the same reason: it lazily produces values, one at a time.
For example, if we were summing the squares of several billion integers, we'd run out of memory with list comprehensions, but generator expressions have no problem. This does take time, though!
total = sum(num * num
for num in xrange(1, 1000000000))
The difference in syntax is that listcomps have square brackets, but generator expressions don't. Generator expressions sometimes do require enclosing parentheses though, so you should always use them.
Rule of thumb:
- Use a list comprehension when a computed list is the desired end result.
- Use a generator expression when the computed list is just an intermediate step.
Here's a recent example I saw at work.
➔
We needed a dictionary mapping month numbers (both as string and as integers) to month codes for futures contracts. It can be done in one logical line of code.
➔
The way this works is as follows:
- The dict() built-in takes a list of key/value pairs (2-tuples).
- We have a list of month codes (each month code is a single letter, and a string is also just a list of letters). We enumerate over this list to get both the month code and the index.
- The month numbers start at 1, but Python starts indexing at 0, so the month number is one more than the index.
- We want to look up months both as strings and as integers. We can use the int() and str() functions to do this for us, and loop over them.
Recent example:
month_codes = dict((fn(i+1), code)
for i, code in enumerate('FGHJKMNQUVXZ')
for fn in (int, str))
month_codes result:
{ 1: 'F', 2: 'G', 3: 'H', 4: 'J', ...
'1': 'F', '2': 'G', '3': 'H', '4': 'J', ...}
It's easy to sort a list in Python:
a_list.sort()
(Note that the list is sorted in-place: the original list is sorted, and the sort method does not return the list or a copy.)
But what if you have a list of data that you need to sort, but it doesn't sort naturally (i.e., sort on the first column, then the second column, etc.)? You may need to sort on the second column first, then the fourth column.
We can use list's built-in sort method with a custom function:
def custom_cmp(item1, item2):
return cmp((item1[1], item1[3]),
(item2[1], item2[3]))
a_list.sort(custom_cmp)
This works, but it's extremely slow for large lists.
DSU = Decorate-Sort-Undecorate
* Note: DSU is often no longer necessary. See the next section, Sorting With Keys for the new approach.
Instead of creating a custom comparison function, we create an auxiliary list that will sort naturally:
# Decorate:
to_sort = [(item[1], item[3], item)
for item in a_list]
# Sort:
to_sort.sort()
# Undecorate:
a_list = [item[-1] for item in to_sort]
The first line creates a list containing tuples: copies of the sort terms in priority order, followed by the complete data record.
The second line does a native Python sort, which is very fast and efficient.
The third line retrieves the last value from the sorted list. Remember, this last value is the complete data record. We're throwing away the sort terms, which have done their job and are no longer needed.
This is a tradeoff of space and complexity against time. Much simpler and faster, but we do need to duplicate the original list.
Python 2.4 introduced an optional argument to the sort list method, "key", which specifies a function of one argument that is used to compute a comparison key from each list element. For example:
def my_key(item):
return (item[1], item[3])
to_sort.sort(key=my_key)
The function my_key will be called once for each item in the to_sort list.
You can make your own key function, or use any existing one-argument function if applicable:
- str.lower to sort alphabetically regarless of case.
- len to sort on the length of the items (strings or containers).
- int or float to sort numerically, as with numeric strings like "2", "123", "35".
We've already seen generator expressions. We can devise our own arbitrarily complex generators, as functions:
def my_range_generator(stop):
value = 0
while value < stop:
yield value
value += 1
for i in my_range_generator(10):
do_something(i)
The yield keyword turns a function into a generator. When you call a generator function, instead of running the code immediately Python returns a generator object, which is an iterator; it has a nextmethod. for loops just call the next method on the iterator, until a StopIteration exception is raised. You can raise StopIteration explicitly, or implicitly by falling off the end of the generator code as above.
Generators can simplify sequence/iterator handling, because we don't need to build concrete lists; just compute one value at a time. The generator function maintains state.
This is how a for loop really works. Python looks at the sequence supplied after the in keyword. If it's a simple container (such as a list, tuple, dictionary, set, or user-defined container) Python converts it into an iterator. If it's already an iterator, Python uses it directly.
Then Python repeatedly calls the iterator's next method, assigns the return value to the loop counter (i in this case), and executes the indented code. This is repeated over and over, untilStopIteration is raised, or a break statement is executed in the code.
A for loop can have an else clause, whose code is executed after the iterator runs dry, but not after a break statement is executed. This distinction allows for some elegant uses. else clauses are not always or often used on for loops, but they can come in handy. Sometimes an else clause perfectly expresses the logic you need.
For example, if we need to check that a condition holds on some item, any item, in a sequence:
for item in sequence:
if condition(item):
break
else:
raise Exception('Condition not satisfied.')
Filter out blank rows from a CSV reader (or items from a list):
def filter_rows(row_iterator):
for row in row_iterator:
if row:
yield row
data_file = open(path, 'rb')
irows = filter_rows(csv.reader(data_file))
Reading Lines From Text/Data Files
datafile = open('datafile')
for line in datafile:
do_something(line)
This is possible because files support a next method, as do other iterators: lists, tuples, dictionaries (for their keys), generators.
There is a caveat here: because of the way the buffering is done, you cannot mix .next & .read* methods unless you're using Python 2.5+.
It's easier to ask forgiveness than permission
Look before you leap
Generally EAFP is preferred, but not always.
- Duck typing
If it walks like a duck, and talks like a duck, and looks like a duck: it's a duck. (Goose? Close enough.)
- Exceptions
Use coercion if an object must be a particular type. If x must be a string for your code to work, why not call
str(x)
instead of trying something like
isinstance(x, str)
You can wrap exception-prone code in a try/except block to catch the errors, and you will probably end up with a solution that's much more general than if you had tried to anticipate every possibility.
try:
return str(x)
except TypeError:
...
Note: Always specify the exceptions to catch. Never use bare except clauses. Bare except clauses will catch unexpected exceptions, making your code exceedingly difficult to debug.
from module import *
You've probably seen this "wild card" form of the import statement. You may even like it. Don't use it.
To adapt a well-known exchange:
(Exterior Dagobah, jungle, swamp, and mist.)
LUKE: Is from module import * better than explicit imports?
YODA: No, not better. Quicker, easier, more seductive.
LUKE: But how will I know why explicit imports are better than the wild-card form?
YODA: Know you will when your code you try to read six months from now.
Wild-card imports are from the dark side of Python.
Never!
The from module import * wild-card style leads to namespace pollution. You'll get things in your local namespace that you didn't expect to get. You may see imported names obscuring module-defined local names. You won't be able to figure out where certain names come from. Although a convenient shortcut, this should not be in production code.
Moral: don't use wild-card imports!
➔
It's much better to:
- reference names through their module (fully qualified identifiers),
➔
- import a long module using a shorter name (alias; recommended),
➔
- or explicitly import just the names you need.
➔
Namespace pollution alert!
Instead,
Reference names through their module (fully qualified identifiers):
import module
module.name
Or import a long module using a shorter name (alias):
import long_module_name as mod
mod.name
Or explicitly import just the names you need:
from module import name
name
Note that this form doesn't lend itself to use in the interactive interpreter, where you may want to edit and "reload()" a module.
To make a simultaneously importable module and executable script:
if __name__ == '__main__':
# script code here
When imported, a module's __name__ attribute is set to the module's file name, without ".py". So the code guarded by the if statement above will not run when imported. When executed as a script though, the __name__ attribute is set to "__main__", and the script code will run.
Except for special cases, you shouldn't put any major executable code at the top-level. Put code in functions, classes, methods, and guard it with if __name__ == '__main__'.
"""module docstring"""
# imports
# constants
# exception classes
# interface functions
# classes
# internal functions & classes
def main(...):
...
if __name__ == '__main__':
status = main()
sys.exit(status)
This is how a module should be structured.
Example: cmdline.py:
#!/usr/bin/env python
"""
Module docstring.
"""
import sys
import optparse
def process_command_line(argv):
"""
Return a 2-tuple: (settings object, args list).
`argv` is a list of arguments, or `None` for ``sys.argv[1:]``.
"""
if argv is None:
argv = sys.argv[1:]
# initialize the parser object:
parser = optparse.OptionParser(
formatter=optparse.TitledHelpFormatter(width=78),
add_help_option=None)
# define options here:
parser.add_option( # customized description; put --help last
'-h', '--help', action='help',
help='Show this help message and exit.')
settings, args = parser.parse_args(argv)
# check number of arguments, verify values, etc.:
if args:
parser.error('program takes no command-line arguments; '
'"%s" ignored.' % (args,))
# further process settings & args if necessary
return settings, args
def main(argv=None):
settings, args = process_command_line(argv)
# application code here, like:
# run(settings, args)
return 0 # success
if __name__ == '__main__':
status = main()
sys.exit(status)
package/
__init__.py
module1.py
subpackage/
__init__.py
module2.py
- Used to organize your project.
- Reduces entries in load-path.
- Reduces import name conflicts.
Example:
import package.module1
from package.subpackage import module2
from package.subpackage.module2 import name
In Python 2.5 we now have absolute and relative imports via a future import:
from __future__ import absolute_import
I haven't delved into these myself yet, so we'll conveniently cut this discussion short.
Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it.
—Brian W. Kernighan, co-author of The C Programming Language and the "K" in "AWK"
In other words, keep your programs simple!
Before writing any code,
➔ ➔ ➔ ➔
- Check Python's standard library.
- Check the Python Package Index (the "Cheese Shop"):
http://cheeseshop.python.org/pypi
- Search the web. Google is your friend.
- "Python Objects", Fredrik Lundh, http://www.effbot.org/zone/python-objects.htm
- "How to think like a Pythonista", Mark Hammond, http://python.net/crew/mwh/hacks/objectthink.html
- "Python main() functions", Guido van Rossum, http://www.artima.com/weblogs/viewpost.jsp?thread=4829
- "Python Idioms and Efficiency", http://jaynes.colorado.edu/PythonIdioms.html
- "Python track: python idioms", http://www.cs.caltech.edu/courses/cs11/material/python/misc/python_idioms.html
- "Be Pythonic", Shalabh Chaturvedi, http://shalabh.infogami.com/Be_Pythonic2
- "Python Is Not Java", Phillip J. Eby, http://dirtsimple.org/2004/12/python-is-not-java.html
- "What is Pythonic?", Martijn Faassen, http://faassen.n--tree.net/blog/view/weblog/2005/08/06/0
- "Sorting Mini-HOWTO", Andrew Dalke, http://wiki.python.org/moin/HowTo/Sorting
- "Python Idioms", http://www.gungfu.de/facts/wiki/Main/PythonIdioms
- "Python FAQs", http://www.python.org/doc/faq/
像职业选手样编码:地道Python的更多相关文章
- python requests接收chunked编码问题-python源码修改
python requests接收chunked编码问题-python源码修改 学习了:https://blog.csdn.net/wangzuxi/article/details/40377467
- 字符编码和Python代码操作文件
字符编码和Python代码操作文件 读写模式之a模式 # a模式 只追加模式 # 路径不存在:自动创建 with open(r'a.txt','a',encoding='utf8') as f: pa ...
- 字符编码和python中的文件处理
字符编码与python文件处理 ---------------- 字符编码 1.常见的编码 ASCII: 美国人发明的,只编码英文字母和符号,1个字节. GB2312: 中国人发明的,增加了中文汉字和 ...
- 字符编码和python使用encode,decode转换utf-8, gbk, gb2312
ASCII码 标准ASCII码使用7位二进制数表示大写或小写字母,数字0到9标点符号以及在美式英语中使用的特殊控制字符. 在标准ASCII码中,最高位(b7)用作奇偶校验位,所谓奇偶校验,是指在代码传 ...
- 编码与Python的基础
编码 在linux 系统或者Python2版本中要用Python这门语言呢,就需要在开头加上 # -*- coding:utf8 -*- 这个语句是说呀,当机器编译你写的程序的时候是用utf-8这种编 ...
- 系统编码,文件编码,python编码
系统编码,可以通过locale命令查看(LINUX)https://wiki.archlinux.org/index.php/Locale_(简体中文), centos7 配置文件在/etc/prof ...
- 系统编码、文件编码与python系统编码
在linux中获取系统编码结果: Windows系统的编码,代码页936表示GBK编码 可以看到linux系统默认使用UTF-8编码,windows默认使用GBK编码.Linux环境下,文件默认使用U ...
- 编码 解码 python
之前一直对python文件中编码解码糊里糊涂,今天看到一篇文章,觉得把我讲的有点明白了.写个心得吧. 1.编码解码是怎么一回事? Python 里面的编码和解码也就是 unicode 和 str 这两 ...
- 码位(code position/point)Unicode 编码与 Python 2/3 编码兼容性问题
Unicode HOWTO 0. 码位(code position/point) 一个码位由某个数值表示,全部码位共同构成其码值空间(code space). ASCII,0~7Fhex(128) 拓 ...
随机推荐
- [Angular Unit Testing] Debug unit testing -- component rendering
If sometime you want to log out the comonent html to see whether the html render correctly, you can ...
- java 返回图片到页面
@RequestMapping(value = "/image/get") public void getImage(HttpServletRequest request, ...
- Python 细节与基础拾遗
locals():当前环境下的全部局部变量,字典(dict)类型,所有的 key 均为字符串类型: if 'sess' in locals() and sess is not None: print( ...
- CSS Reset的相关概念及实例
原文 简书原文:https://www.jianshu.com/p/fdb79010895c 大纲 1.什么是css reset? 2.CSS reset的实例 1.什么是css reset? 个人理 ...
- Maven实战——有用Nexus创建私服(下)
使用Maven部署构件至Nexus 日常开发生成的快照版本号构件能够直接部署到Nexus中策略为Snapshot的宿主仓库中.项目正式公布的构建部署到Nexus中策略为Release的宿主仓库中.PO ...
- js课程 2-6 js如何进行类型转换及js运算符有哪些
js课程 2-6 js如何进行类型转换及js运算符有哪些 一.总结 一句话总结: 1.所有类型->布尔类型(为假的情况)有哪些(6种)? 1)字符串('')2)整型(0)3)浮点型(0.0)4) ...
- Java基本数据类型的取值范围
版权声明:本文为博主原创文章,未经博主允许不得转载. 先看一段代码public class Hello{ public static void main(String[] args){ ...
- jquery中的this与$(this)的区别总结(this:html元素)($(this):JQuery对象)
jquery中的this与$(this)的区别总结(this:html元素)($(this):JQuery对象) 一.总结 1.this所指的是html 元素,有html的属性,可用 this.属性 ...
- 图形界面Aardio
用aardio给python写个图形界面 前阵子在用python写一些小程序,写完后就开始思考怎么给python程序配一个图形界面,毕竟控制台实在太丑陋了. 于是百度了下python的图形界面库,眼花 ...
- PHP CodeBase: 判断用户是否手机访问
随着移动设备的普及,网站也会迎来越来越多移动设备的访问.用适应PC的页面,很多时候对手机用户不友好,那么有些时候,我们需要判断用户是否用手机访问,如果是手机的话,就跳转到指定的手机友好页面.这里就介绍 ...