在使用时需要包含头文件

#include <errno.h>

merlin@tfAnalysis:~/projects/tfradius$ cat /usr/include/asm-generic/errno-base.h
#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */ #endif
merlin@tfAnalysis:~/projects/tfradius$ cat /usr/include/asm-generic/errno.h
#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H #include <asm-generic/errno-base.h> #define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */ #define EDEADLOCK EDEADLK #define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */ #define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */ /* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */ #define ERFKILL 132 /* Operation not possible due to RF-kill */ #define EHWPOISON 133 /* Memory page has hardware error */ #endif

Linux的错误码的更多相关文章

  1. 写给初学者的Linux errno 错误码机制

    不同于Java的异常处理机制, 当你使用C更多的接触到是基于错误码的异常机制, 简单来说就是当调用的函数发生异常时, 程序不会跳转到一个统一处理异常的地方, 取而代之的是返回一个整型错误码. 可能会有 ...

  2. linux的错误码error

    在程序出错时,我们通过全局变量错误号errno和perror函数能够很快的定位到错误原因. Linux错误代码及其含义 C Name Value Description 含义Success 0 Suc ...

  3. Linux 内核错误码

    #define    EPERM         1    /* Operation not permitted */#define    ENOENT        2    /* No such ...

  4. Linux环境下错误码及意义总结

    Linux的错误码包含在/usr/include/asm-generic/errno-base.h和/usr/include/asm-generic/errno.h 这两个文件内: #ifndef _ ...

  5. 微信支付curl出错及错误码解决方案

    1. curl错误码6 出现场景 PHP Fatal error: Uncaught exception 'WxPayException' with message 'curl出错,错误码:6' in ...

  6. errno.h 错误码描述.

    描述:一般说的Linux源码的目录,默认是基于 /usr/include/ 的. 使用 char *strerror(int errnum); 函数打印错误代码的描述.我简单对比了一下,发现描述大体一 ...

  7. 【SMTP】常见错误码

    '* 邮件服务返回代码含义 '* 500 格式错误,命令不可识别(此错误也包括命令行过长) '* 501 参数格式错误 '* 502 命令不可实现 '* 503 错误的命令序列 '* 504 命令参数 ...

  8. Smtp错误码

    Smtp错误码列表及相关原因 错误总表 420 1. Timeout Communication Problem Encountered During Transmission. Thie Is a ...

  9. ORACLE.错误码 ORA-12154 及Oracle客户端免安装版的设置

    .错误码 ORA-12154相信作为ORACLE数据库的开发人员没有少碰到“ORA-12154: TNS: 无法解析指定的连接标识符”,今天我也又碰到了类似的情况,将我的解决方法进行小结,希望能对碰到 ...

随机推荐

  1. 【转】Oracle Outline使用方法及注意事项

    概要  Oracle Outline是用来保持SQL运行计划(execution plan)的一个工具. 我们能够通过outline工具防止SQL运行计划在数据库环境变更(如统计信息,部分參数等)而引 ...

  2. “GDI+ 发生一般错误” 解决方法

    System.Runtime.InteropServices.ExternalException: GDI+ 发生一般错误 对应的帐户没有写权限,给予帐户写权限 版权声明:本文博主原创文章,博客,未经 ...

  3. Repository、IUnitOfWork和IDbContext

    DDD 领域驱动设计-谈谈Repository.IUnitOfWork和IDbContext的实践 上一篇:<DDD 领域驱动设计-谈谈 Repository.IUnitOfWork 和 IDb ...

  4. SCM白色幼儿系列(十二) Proteus仿真软件简介

    Proteus软件是英国Labcenter electronics公司出版的EDA工具软件.经常使用于单片机等数字电路仿真,分为ISIS和ARES两个程序,前者用于仿真,后者用于设计PCB.我们常使用 ...

  5. 学生表sid,sname,结果表cid,cname,学生成绩表sid,cid,cscore,最高要求的分数输出候补课程专门命名

    --1.建表SQL: --学生表: -- Createtable createtable STUDENT ( SID   NUMBERnotnull, SNAME NVARCHAR2) ) table ...

  6. iOS 生成随机颜色(UIColor)

    #import <UIKit/UIKit.h> @interface UIColor (RandomColor) +(UIColor *) randomColor; @end #impor ...

  7. 数组、链表、Hash(转)

    在程序中,存放指定的数据最常用的数据结构有两种:数组和链表. 数组和链表的区别: 1.数组是将元素在内存中连续存放. 链表中的元素在内存中不是顺序存储的,而是通过存在元素中的指针联系到一起. 2.数组 ...

  8. 【剑指offer】数字数组中只出现一次(2)

    转载请注明出处:http://blog.csdn.net/mmc_maodun/article/details/27800577 题目:一个int数组中有三个数字a.b.c仅仅出现一次,其它数字都出现 ...

  9. Xcode5和6共处,如何发布应用程序存储

    怎样你和我一样手贱安装了Xcode6,同一时候又须要公布应用到商店时,你会发现打好的包是通只是审核的. 验证报错: unable to validate application archives of ...

  10. CocoaPods 建立私有仓库

    CocoaPods是iOS,Mac下优秀的第三方包管理工具,类似于java的maven,给我们项目管理带来了极大的方便. [个人或公司在开发过程中,会积累很多可以复用的代码包,有些我们不想开源,又想像 ...