Centos7 禁止firewalld并使用iptables 作默认防火墙以及忘记root密码的处理方法
一、停止并禁用firewalld
[root@test ~]# systemctl stop firewalld
[root@test ~]# systemctl disable firewalld
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
二、查看iptables 列表,并安装service 软件

[root@test ~]# yum list all iptables*
已加载插件:fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.neusoft.edu.cn
* extras: mirrors.tuna.tsinghua.edu.cn
* updates: mirrors.sina.cn
已安装的软件包
iptables.x86_64 1.4.21-16.el7 @base
可安装的软件包
iptables.i686 1.4.21-16.el7 base
iptables-devel.i686 1.4.21-16.el7 base
iptables-devel.x86_64 1.4.21-16.el7 base
iptables-services.x86_64 1.4.21-16.el7 base
iptables-utils.x86_64 1.4.21-16.el7 base

安装service
[root@test ~]# yum install iptables-services -y
三、启动iptables服务,并检查状态

[root@test ~]# systemctl start iptables
[root@test ~]# systemctl status iptables
● iptables.service - IPv4 firewall with iptables
Loaded: loaded (/usr/lib/systemd/system/iptables.service; disabled; vendor preset: disabled)
Active: active (exited) since 五 2016-08-05 07:54:57 CST; 9s ago
Process: 8164 ExecStart=/usr/libexec/iptables/iptables.init start (code=exited, status=0/SUCCESS)
Main PID: 8164 (code=exited, status=0/SUCCESS) 8月 05 07:54:56 test systemd[1]: Starting IPv4 firewall with iptables...
8月 05 07:54:57 test iptables.init[8164]: iptables: Applying firewall rules: [ OK ]
8月 05 07:54:57 test systemd[1]: Started IPv4 firewall with iptables.

四、加入开机自启动
[root@test ~]# systemctl enable iptables
Created symlink from /etc/systemd/system/basic.target.wants/iptables.service to /usr/lib/systemd/system/iptables.service.
另:systemctl命令相关
如何激活服务并在启动时启用或禁用服务(即系统启动时自动启动服务)
# systemctl enable httpd.service
# systemctl disable httpd.service
如何屏蔽(让它不能启动)或显示服务(如 httpd.service)
# systemctl mask httpd.service
ln -s '/dev/null' '/etc/systemd/system/httpd.service'
# systemctl unmask httpd.service
rm '/etc/systemd/system/httpd.service
列出所有服务(包括启用的和禁用的):
# systemctl list-unit-files --type=service
UNIT FILE STATE
arp-ethers.service disabled
auditd.service enabled
autovt@.service disabled
blk-availability.service disabled
brandbot.service static
console-getty.service disabled
console-shell.service disabled
container-getty@.service static
...
分析启动时各个进程花费的时间:
# systemd-analyze blame
8.565s mariadb.service
7.991s webmin.service
6.095s postfix.service
4.311s httpd.service
3.926s firewalld.service
3.780s kdump.service
3.238s tuned.service
1.712s network.service
1.394s lvm2-monitor.service
1.126s systemd-logind.service
....
更多参考:https://linux.cn/article-5926-1.html
------------------------------------------------------------------------------------------
忘记root密码时:
1 - 在启动grub菜单,选择编辑选项启动
2 - 按键盘e键,来进入编辑界面
3 - 找到Linux 16的那一行,将ro改为rw init=/sysroot/bin/sh
4 - 现在按下 Control+x ,使用单用户模式启动
Centos7 禁止firewalld并使用iptables 作默认防火墙以及忘记root密码的处理方法的更多相关文章
- Centos7 禁止firewalld并使用iptables 作默认防火墙
一.停止并禁用firewalld [root@test ~]# systemctl stop firewalld [root@test ~]# systemctl disable firewalld ...
- CentOS7忘记root密码的解决方法
开机启动centos 7.0,看到如下画面,选择下图选单,按"e"键 在下图linux16行中,将ro这两个字母修改为rw init=/sysroot/bin/sh 修改结果如下图 ...
- centos7忘记root密码的重置方法-超简单
忘记root密码,重置root密码8步. 1.在开机界面按e进入grub编辑模式 2.找到 ro修改为rw /sysroot/bin/sh 3.Ctrl + x 启动 4.chroot /sysroo ...
- CentOS7忘记root密码的修改方法
参考文献: [1]CentOS 6 & 7 忘记root密码的修改方法_Linux教程_Linux公社-Linux系统门户网站
- CentOS7下mysql忘记root密码的处理方法
1. vi /etc/my.cnf,在[mysqld]中添加 skip-grant-tables 例如: [mysqld] skip-grant-tables datadir=/var/lib/my ...
- CentOS7|RHEL忘记root密码
某一服务器长时间不使用,或者由于频繁修改root密码,导致忘记root密码无法登陆系统问题,通过进入单用户修改root密码,CentOS7|RHEL7与6系列有一些区别,不在适用于7. 1.在启动gr ...
- 其它综合-CentOS7 忘记root密码
CentOS7 忘记root密码 长时间不用的 CentOS 机器再次开机的时候忽然忘记了密码,总不能就重装一台吧,还有好多服务在机器上,于是决定重置root的密码. 如果是已经开启的机器,需要进行关 ...
- 其它综合-CentOS7 解决忘记root密码
CentOS7 解决忘记root密码 1.重启 长时间不用的 CentOS 机器再次开机的时候忽然忘记了密码,总不能就重装一台吧,还有好多服务在机器上,于是决定重置 root 的密码. 如果是已经开启 ...
- 0、CentOS7系统root密码丢失找回方法
第一步 1.重新启动或开启CentOS7.6系统,在选择进入系统的Grub菜单界面如下图1-1,根据提示按"e"小写字母进入编辑界面,如下图1-2所示: 图1-1 CentOS7. ...
随机推荐
- sublime text3 快捷键设置
//插入到key binding user 里面,浏览器安装路径修改成自己的路径 1[ //firefox测试快捷键 { "keys":["f3"], &quo ...
- js 实现继承相关
☊ [要求]:实现一个Animal类, 和一个继承它的Dog类 ☛ [实现]: function Animal(name) { this.name = name; } Animal.prototype ...
- s查找父节点
查找所有的父节点,包括本身,不包括就<>id with tbs as(select * from TB_HomeBase where ID=223 union all select a.* ...
- hdu4737 A Bit Fun
link:http://acm.hdu.edu.cn/showproblem.php?pid=4737 暴力可以过啊.O(N^2)的复杂度. #include <cstdio> ]; in ...
- CDH自己安装方式Hbase master备份方式
hbase-daemon.sh start master 启动改命令会默认产生Hmaster 进程,等待主机宕机,zookeepr 监控
- 递归输出文件夹下的所有文件的名称(转自 MSDN)
问题:如何输出给定文件夹目录下面的所有文件的名称? C#代码: using System; using System.IO; namespace MyTest { public class Progr ...
- 5天玩转C#并行和多线程编程
5天玩转C#并行和多线程编程系列文章目录 5天玩转C#并行和多线程编程 —— 第一天 认识Parallel 5天玩转C#并行和多线程编程 —— 第二天 并行集合和PLinq 5天玩转C#并行和多线程编 ...
- 将WeX5部署到自己的Tomcat服务器上
页面服务UIServer布署 WeX5自带页面服务UIServer的是标准Web应用,可以部署在Java Web应用服务器上.下面介绍如何在Tomcat和WebLogic中部署WeX5的UIServe ...
- [系统设计/开发] APP密钥签发服务器
公司的信息安全制度要求对产线的APP进行严格的签发管理,确保密钥.密码的安全. 之前的做法是: 建立一台独立的签发主机: 密钥放在签发主机上,由专人管理: 构建系统每构建出一个产线APP,都要手动拷贝 ...
- HBase体系结构(转)
HBase的服务器体系结构遵循简单的主从服务器架构,它由HRegion服务器(HRegion Server)群和HBase Master服务器(HBase Master Server)构成.HBase ...