作用,将qq1收到邮件,用qq2的账号、以qq0的为发件人身份放到qq2的邮箱。

什么样做这样一个功能,一个朋友要求的,她不告诉我为什么,好吧

<?php
define('USER','xxx@qq.com');//qq1用户名
define('PWD','xxx');//qq1密码
define('USER_RECEIVER', 'xxx@qq.com');//转发目标 define('REV_INTERVAL', 30);//收取间隔,单位:秒,不要太小否则可能导致邮箱被封
define('DELETE', false);//设置为false表示不删除,设置为true,转发后删除 define('DEBUG', false);
while(true){
echo 'OPENING '.USER.'...'.chr(10);
$inbox = imap_open ("{imap.qq.com:993/imap2/ssl}INBOX", USER, PWD);
if(DEBUG)
echo 'There are '.imap_num_msg($inbox).' mails in the first page'.chr(10); /*
$list = imap_list($inbox, "{imap.qq.com}", "*");
if (is_array($list)) {
echo 'Mailbox list: '.chr(10);
foreach ($list as $val) {
echo ' '.imap_utf7_decode($val) . "\n";
}
} else {
echo "imap_list failed: " . imap_last_error() . "\n";
}
*/ echo 'GETTING INFO...'.chr(10);
$chk =(array) imap_mailboxmsginfo($inbox); echo '=>Mailbox: '.$chk['Mailbox'].chr(10);
echo ' Time: '.$chk['Date'].chr(10);
echo ' Size: '.$chk['Size'].chr(10);
echo ' Unread: '.$chk['Unread'].chr(10); $mails = array();
while(true){
$list = imap_search($inbox, 'UNSEEN');
if(!$list) break; $count = count($list);
if($count==0) break; if(DEBUG)
var_dump($list); foreach($list as $l) {
echo '-)DEAILING '.$l.'...'.chr(10); $body = @imap_body( $inbox ,$l, 2);
if(!$body) continue;
$h = imap_headerinfo($inbox ,$l);
if(!$h) continue; if(DEBUG)
{
echo $body;
}
$m = parseMail($body); $m['id'] = $l;
$m['title'] = '';
if($h->Subject){
$m['title'] = $h->Subject;
}else if($h->subject){
$m['title'] = $h->subject;
} if($m['title']){
$st = explode('?', $m['title']);
$m['title'] = base64_decode($st[3]);
} $mails[] = $m; if(DEBUG)
echo "\n\n>========= * ===========\n\n".print_r($m,1)."\n\n========== * ==========<\n\n";
echo '
/////////////////////////////////////////////////////
'.iconv('utf-8','gbk','新邮件').'
/////////////////////////////////////////////////////
';
$echo = ' -> NEW MAIL: '.chr(10).' => TITLE: '.trim($m['title']).chr(13).chr(10).' => CONTENT: '.trim($m['text']).chr(13).chr(10);
echo $echo;
file_put_contents('c:/mail.txt', $echo.$m['html']);
echo '
/////////////////////////////////////////////////////
';
if(confirm('Mail saved to c:/mail.txt.'."\n".'Whether to forward?(Y/N)'))
transferMail($m); echo " ->SET ".$m['id']." TO BE READED\r\n";
$status = imap_setflag_full($inbox, $m['id'], "\\SEEN".(DELETE?' \Deleted':''));
if(DEBUG){
echo ' ->'.gettype($status) . "\n";
echo ' ->'.$status . "\n";
}
echo ' ->DONE'.chr(10);
}
echo ' ->Wait a moment'.chr(10);
sleep(rand(1,3));
break;
} imap_close($inbox);
//imap_gc($inbox, IMAP_GC_ELT);
echo ' ->Wait '.REV_INTERVAL.'\'s'.chr(10);
$count = 0;
while(REV_INTERVAL>$count++){
if($count%10==0){
echo $count.chr(10);
/*if (!imap_ping($inbox)) {
echo 'RE OPENING '.USER.'...'.chr(10);
$inbox = imap_open ("{imap.qq.com:993/imap2/ssl}INBOX", USER, PWD);
}*/
}else
echo '.'; sleep(1);
}
}
function parseMail($s){
$sp = substr($s, 0 , strpos($s, "\r\n"));
$strs = explode($sp, $s); if(DEBUG)
var_dump($strs); //array_shift($strs);
$mail = array(
'header'=>'',
'title'=>'',
'body'=>''
);
foreach($strs as $k=>$p){
if(!$p) continue;
$tmp = explode("\r\n\r\n", $p, 2);
$headers = explode("\r\n",$tmp[0]);
$body = $tmp[1]; $base64_flag = false;
$rtn_header = '';
foreach($headers as $h){
$tmp = explode(':', $h, 2);
$type_h = $tmp[0];
$value_h = $tmp[1];
if($type_h=='Content-Type'){
if(DEBUG)
echo $h."\r\n";
$rtn_header.=$h."\r\n";
}else if($type_h=='Content-Transfer-Encoding'){
if(DEBUG)
echo $h."\r\n";
if(trim($value_h)=='base64')
$base64_flag = true;
else
echo $value_h.chr(10);
}
} if($base64_flag){
if($k==1){
$mail['text'] = base64_decode($body);
$mail['header'] = $rtn_header;
}else if($k==2){
$mail['html'] = base64_decode($body);
$mail['header'] = $rtn_header;
}
if(DEBUG)
echo base64_decode($body);
}
if(DEBUG)
echo "\r\n";
}
return $mail;
}
function transferMail($m){
//通过往自己收件箱加邮件的方式来达到发送的目的 $smtpserver = "smtp.qq.com";//SMTP服务器
$smtpserverport = 25;//SMTP服务器端口
$smtpusermail = USER;//SMTP服务器的用户邮箱
$smtpemailto = USER_RECEIVER;//发送给谁
$smtpuser = USER;//SMTP服务器的用户帐号
$smtppass = PWD;//SMTP服务器的用户密码
$mailsubject = replace($m['title']);//邮件主题
$mailbody = replace(isset($m['html'])?$m['html']:$m['text']);//邮件内容
$mailtype = isset($m['html'])?'HTML':'TXT';//邮件格式(HTML/TXT),TXT为文本邮件 ##########################################
$smtp = new smtp($smtpserver,$smtpserverport,true,$smtpuser,$smtppass);//这里面的一个true是表示使用身份验证,否则不使用身份验证.
$smtp->debug = false;//是否显示发送的调试信息
$smtp->sendmail($smtpemailto, $smtpusermail, $mailsubject, $mailbody, $mailtype);
} function confirm($str="Input "){
while(true){
echo $str.": \r\n";
$str = 'Please type Y or N';
$s=trim(strtolower(fgets(STDIN))); $str .= ', not '.$s;
if($s=='y'||$s=='n')
break;
}
return $s=='y';
} function replace($txt){
$txt = preg_replace("/@\w+/",'', $txt);
$pos = strpos($txt, '原始邮件');
if($pos!==false)
$txt = substr($txt,0, $pos);
return $txt;
} class smtp
{
/* Public Variables */
var $smtp_port;
var $time_out;
var $host_name;
var $log_file;
var $relay_host;
var $debug;
var $auth;
var $user;
var $pass; /* Private Variables */
var $sock; /* Constractor */
function smtp($relay_host = "", $smtp_port = 25,$auth = false,$user,$pass)
{
$this->debug = FALSE;
$this->smtp_port = $smtp_port;
$this->relay_host = $relay_host;
$this->time_out = 30; //is used in fsockopen()
$this->auth = $auth;//auth
$this->user = $user;
$this->pass = $pass;
$this->host_name = "localhost"; //is used in HELO command
$this->log_file = "";
$this->sock = FALSE;
} /* Main Function */
function sendmail($to, $from, $subject = "", $body = "", $mailtype, $cc = "", $bcc = "", $additional_headers = "")
{
$mail_from = $this->get_address($this->strip_comment($from));
$body = ereg_replace("(^|(\r\n))(\.)", "\1.\3", $body);
$header .= "MIME-Version:1.0\r\n";
if($mailtype=="HTML")
{
$header .= "Content-Type:text/html\r\n";
}
$header .= "To: ".$to."\r\n";
if ($cc != "")
{
$header .= "Cc: ".$cc."\r\n";
}
$header .= "From: $from<".$from.">\r\n";
$header .= "Subject: ".$subject."\r\n";
$header .= $additional_headers;
$header .= "Date: ".date("r")."\r\n";
$header .= "X-Mailer:By Redhat (PHP/".phpversion().")\r\n";
list($msec, $sec) = explode(" ", microtime());
$header .= "Message-ID: <".date("YmdHis", $sec).".".($msec*1000000).".".$mail_from.">\r\n";
$TO = explode(",", $this->strip_comment($to)); if ($cc != "")
{
$TO = array_merge($TO, explode(",", $this->strip_comment($cc)));
}
if ($bcc != "")
{
$TO = array_merge($TO, explode(",", $this->strip_comment($bcc)));
}
$sent = TRUE;
foreach ($TO as $rcpt_to)
{
$rcpt_to = $this->get_address($rcpt_to);
if (!$this->smtp_sockopen($rcpt_to))
{
$this->log_write("Error: Cannot send email to ".$rcpt_to."\n");
$sent = FALSE;
continue;
}
if ($this->smtp_send($this->host_name, $mail_from, $rcpt_to, $header, $body))
{
$this->log_write("E-mail has been sent to <".$rcpt_to.">\n");
}
else
{
$this->log_write("Error: Cannot send email to <".$rcpt_to.">\n");
$sent = FALSE;
}
fclose($this->sock);
$this->log_write("Disconnected from remote host\n");
}
return $sent;
} /* Private Functions */
function smtp_send($helo, $from, $to, $header, $body = "")
{
if (!$this->smtp_putcmd("HELO", $helo))
{
return $this->smtp_error("sending HELO command");
} #auth
if($this->auth)
{
if (!$this->smtp_putcmd("AUTH LOGIN", base64_encode($this->user)))
{
return $this->smtp_error("sending HELO command");
}
if (!$this->smtp_putcmd("", base64_encode($this->pass)))
{
return $this->smtp_error("sending HELO command");
}
}
if (!$this->smtp_putcmd("MAIL", "FROM:<".$from.">"))
{
return $this->smtp_error("sending MAIL FROM command");
}
if (!$this->smtp_putcmd("RCPT", "TO:<".$to.">"))
{
return $this->smtp_error("sending RCPT TO command");
}
if (!$this->smtp_putcmd("DATA"))
{
return $this->smtp_error("sending DATA command");
}
if (!$this->smtp_message($header, $body))
{
return $this->smtp_error("sending message");
}
if (!$this->smtp_eom())
{
return $this->smtp_error("sending <CR><LF>.<CR><LF> [EOM]");
}
if (!$this->smtp_putcmd("QUIT"))
{
return $this->smtp_error("sending QUIT command");
}
return TRUE;
} function smtp_sockopen($address)
{
if ($this->relay_host == "")
{
return $this->smtp_sockopen_mx($address);
}
else
{
return $this->smtp_sockopen_relay();
}
} function smtp_sockopen_relay()
{
$this->log_write("Trying to ".$this->relay_host.":".$this->smtp_port."\n");
$this->sock = @fsockopen($this->relay_host, $this->smtp_port, $errno, $errstr, $this->time_out);
if (!($this->sock && $this->smtp_ok()))
{
$this->log_write("Error: Cannot connenct to relay host ".$this->relay_host."\n");
$this->log_write("Error: ".$errstr." (".$errno.")\n");
return FALSE;
}
$this->log_write("Connected to relay host ".$this->relay_host."\n");
return TRUE;;
} function smtp_sockopen_mx($address)
{
$domain = ereg_replace("^.+@([^@]+)$", "\1", $address);
if (!@getmxrr($domain, $MXHOSTS))
{
$this->log_write("Error: Cannot resolve MX \"".$domain."\"\n");
return FALSE;
}
foreach ($MXHOSTS as $host)
{
$this->log_write("Trying to ".$host.":".$this->smtp_port."\n");
$this->sock = @fsockopen($host, $this->smtp_port, $errno, $errstr, $this->time_out);
if (!($this->sock && $this->smtp_ok()))
{
$this->log_write("Warning: Cannot connect to mx host ".$host."\n");
$this->log_write("Error: ".$errstr." (".$errno.")\n");
continue;
}
$this->log_write("Connected to mx host ".$host."\n");
return TRUE;
}
$this->log_write("Error: Cannot connect to any mx hosts (".implode(", ", $MXHOSTS).")\n");
return FALSE;
} function smtp_message($header, $body)
{
fputs($this->sock, $header."\r\n".$body);
$this->smtp_debug("> ".str_replace("\r\n", "\n"."> ", $header."\n> ".$body."\n> "));
return TRUE;
} function smtp_eom()
{
fputs($this->sock, "\r\n.\r\n");
$this->smtp_debug(". [EOM]\n");
return $this->smtp_ok();
} function smtp_ok()
{
$response = str_replace("\r\n", "", fgets($this->sock, 512));
$this->smtp_debug($response."\n");
if (!ereg("^[23]", $response))
{
fputs($this->sock, "QUIT\r\n");
fgets($this->sock, 512);
$this->log_write("Error: Remote host returned \"".$response."\"\n");
return FALSE;
}
return TRUE;
} function smtp_putcmd($cmd, $arg = "")
{
if ($arg != "")
{
if($cmd=="")
{
$cmd = $arg;
}
else
{
$cmd = $cmd." ".$arg;
}
}
fputs($this->sock, $cmd."\r\n");
$this->smtp_debug("> ".$cmd."\n");
return $this->smtp_ok();
} function smtp_error($string)
{
$this->log_write("Error: Error occurred while ".$string.".\n");
return FALSE;
} function log_write($message)
{
$this->smtp_debug($message);
if ($this->log_file == "")
{
return TRUE;
}
$message = date("M d H:i:s ").get_current_user()."[".getmypid()."]: ".$message;
if (!@file_exists($this->log_file) || !($fp = @fopen($this->log_file, "a")))
{
$this->smtp_debug("Warning: Cannot open log file \"".$this->log_file."\"\n");
return FALSE;;
}
flock($fp, LOCK_EX);
fputs($fp, $message);
fclose($fp);
return TRUE;
} function strip_comment($address)
{
$comment = "\([^()]*\)";
while (ereg($comment, $address))
{
$address = ereg_replace($comment, "", $address);
}
return $address;
} function get_address($address)
{
$address = ereg_replace("([ \t\r\n])+", "", $address);
$address = ereg_replace("^.*<(.+)>.*$", "\1", $address);
return $address;
} function smtp_debug($message)
{
if ($this->debug)
{
echo $message;
}
} }

PHP IMAP收QQ邮件,SMTP存入另外QQ邮箱的更多相关文章

  1. centos 邮件服务 腾讯企业邮箱(免费) 使用iRedmail 需要有公网的centos主机 发邮件协议:smtp 端口25 收邮件协议:pop3 端口110 iredmail安装配置 使用邮箱系统 第三十一节课

    centos   邮件服务  腾讯企业邮箱(免费) 使用iRedmail 需要有公网的centos主机 发邮件协议:smtp 端口25  收邮件协议:pop3 端口110  iredmail安装配置 ...

  2. java maven通过SMTP发送QQ邮件的完全步骤

    1.首先打开QQ邮箱的SMTP服务,因为QQ邮箱对于一般的用户都是默认关闭SMTP服务的. 找到SMTP服务的选项,可以看到此处默认是关闭的,点击开启,然后腾讯会进行一些身份验证,身份验证通过以后,腾 ...

  3. python3:利用SMTP协议发送QQ邮件+附件

    转载请表明出处:https://www.cnblogs.com/shapeL/p/9115887.html 1.发送QQ邮件,首先必须知道QQ邮箱的SMTP服务器 http://service.mai ...

  4. Jenkins配置邮件SMTP(使用QQ邮箱)

    一.QQ邮箱中开启SMTP服务 进入QQ邮箱的设置页面,选择开启POP3/SMTP服务 需要发送一条短信开启服务,成功后,会收到一个密码,一定要截图.复制密码保存好 二.Jenkins中配置SMTP ...

  5. Android pop3与imap方式接收邮件(javamail)

    需要下载3个jar包:mail.jar/    activation.jar/    additionnal.jar 1.pop3 /** * 以pop3方式读取邮件,此方法不能读取邮件是否为已读,已 ...

  6. 5分钟 wamp下php phpmaile发送qq邮件 2015最新方法说明

    13:40 2015/11/20 5分钟 wamp下php phpmaile发送qq邮件 2015最新方法说明 关键点:现在qq邮箱开通smtp服务后会给你一个很长的独立新密码,发邮件配置中的密码需要 ...

  7. 线程——QQ邮件发送

    一.造一个QQ邮件发送的窗体 二.开始编写关于邮件发送的代码,以及当点发送按钮的时候,给发送按钮单独造了一个新的线程.这样如果发送的附件太多的话,如果不给发送按钮造新的线程,便会卡住,但是如果给发送按 ...

  8. C#实现发送给QQ邮件

    最近在做一个通过点击忘记密码往用户邮箱中发邮件(邮件内容是一个超链接)点击进行修改的功能,发送原理,我们只是把邮件发送给smtp服务器,然后再由smtp服务器发送到邮箱,发送之前要校验一下. 1.微软 ...

  9. PostFix使用dovecot支持POP3/IMAP收信

    PostFix只能够收发邮件,以及使用SMTP发送邮件,想要使用POP3/IMAP收信的话必须装其他软件,本文通过配置dovecot让邮件服务器支持POP3/IMAP收信.POP3/IMAP是一种收信 ...

随机推荐

  1. [转发] 老叶观点:MySQL开发规范之我见

    原文: http://imysql.com/2015/07/23/something-important-about-mysql-design-reference.shtml 老叶观点:MySQL开发 ...

  2. 卷积FFT、NTT、FWT

    先简短几句话说说FFT.... 多项式可用系数和点值表示,n个点可确定一个次数小于n的多项式. 多项式乘积为 f(x)*g(x),显然若已知f(x), g(x)的点值,O(n)可求得多项式乘积的点值. ...

  3. css处理浏览器兼容问题

    浏览器的兼容: _ ie6认识 格式:_width:100px;要写在最后面来覆盖前面的. * ie6和ie7都认识 格式:* width:100px;要写在最后面来覆盖前面的. \0 ie8认识  ...

  4. 多线程调用HttpWebRequest并发连接限制

    .net 的 HttpWebRequest 或者 WebClient 在多线程情况下存在并发连接限制,这个限制在桌面操作系统如 windows xp , windows  7 下默认是2,在服务器操作 ...

  5. 每日一笔记之2:QT之坐标系统:

    以前一直多单片机开发,也没怎么使用过大的显示器,第一次学习,备忘: QT画图系统. 绘图,通过QPainter类实现. Qt的绘图系统对底层函数进行了良好的封装,使得在屏幕和设备的绘图功能可能使用相同 ...

  6. NFS挂载根文件系统

    当NFS跟文件系统挂载不上的时候原因很多,但有一个原因不可忽略,那就是目标板内核支持的NFS版本以及默认版本,我吃过亏,特意做个笔记: setenv bootargs console=ttySAC0  ...

  7. hiho_100_八数码

    题目大意 8数码问题,在3x3的矩阵中填入0-8九个数字,0可以和它相邻的数字进行交换.从初始状态到达状态F(3x3的方格从上到下,从左到右,形成的数字串为123456780)所需要最少移动的次数. ...

  8. printf();

    使用方式: ① uint8_t *rmt_str=0; rmt_str="ERROR"; printf("%s\r\n",rmt_str); ② int a=1 ...

  9. AsyncTask实现异步线程通信

    AsyncTask是Android1.5开始提供的一个封装了Thread与Handler可以实现异步线程的简单方式,不需要再自己实现子线程,然后在主线程处接受数据. 因为AsyncTask是用线程池, ...

  10. java写的简单通用线程池demo

    首先声明,代码部分来自网络. 1.入口DabianTest: package com.lbh.myThreadPool; import java.util.ArrayList; import java ...