1.httpd.conf

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/access_log"

# with ServerRoot set to "/usr/local/apache2" will be interpreted by the

# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"

# will be interpreted as '/logs/access_log'.

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which httpd.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used.  If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

#

ServerRoot "C:/userTool/xampp/apache"

#

# Mutex: Allows you to set the mutex mechanism and mutex file directory

# for individual mutexes, or change the global defaults

#

# Uncomment and change the directory if mutexes are file-based and the default

# mutex file directory is not on a local disk or is not appropriate for some

# other reason.

#

# Mutex default:logs

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:80

Listen 9090

#Listen 80

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule access_compat_module modules/mod_access_compat.so

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule allowmethods_module modules/mod_allowmethods.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule auth_form_module modules/mod_auth_form.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

LoadModule authn_core_module modules/mod_authn_core.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authn_socache_module modules/mod_authn_socache.so

#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

LoadModule authz_core_module modules/mod_authz_core.so

#LoadModule authz_dbd_module modules/mod_authz_dbd.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule brotli_module modules/mod_brotli.so

#LoadModule buffer_module modules/mod_buffer.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule cache_disk_module modules/mod_cache_disk.so

#LoadModule cache_socache_module modules/mod_cache_socache.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

#LoadModule data_module modules/mod_data.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule dumpio_module modules/mod_dumpio.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

#LoadModule http2_module modules/mod_http2.so

LoadModule headers_module modules/mod_headers.so

#LoadModule heartbeat_module modules/mod_heartbeat.so

#LoadModule heartmonitor_module modules/mod_heartmonitor.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_debug_module modules/mod_log_debug.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule lua_module modules/mod_lua.so

LoadModule cache_disk_module modules/mod_cache_disk.so

#LoadModule md_module modules/mod_md.so

#LoadModule macro_module modules/mod_macro.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule proxy_module modules/mod_proxy.so

LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_express_module modules/mod_proxy_express.so

#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so

#LoadModule proxy_html_module modules/mod_proxy_html.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule proxy_http2_module modules/mod_proxy_http2.so

#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so

#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

#LoadModule ratelimit_module modules/mod_ratelimit.so

#LoadModule reflector_module modules/mod_reflector.so

#LoadModule remoteip_module modules/mod_remoteip.so

#LoadModule request_module modules/mod_request.so

#LoadModule reqtimeout_module modules/mod_reqtimeout.so

LoadModule rewrite_module modules/mod_rewrite.so

#LoadModule sed_module modules/mod_sed.so

#LoadModule session_module modules/mod_session.so

#LoadModule session_cookie_module modules/mod_session_cookie.so

#LoadModule session_crypto_module modules/mod_session_crypto.so

#LoadModule session_dbd_module modules/mod_session_dbd.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so

#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

#LoadModule socache_dbm_module modules/mod_socache_dbm.so

#LoadModule socache_memcache_module modules/mod_socache_memcache.so

LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

#LoadModule speling_module modules/mod_speling.so

LoadModule ssl_module modules/mod_ssl.so

LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

LoadModule version_module modules/mod_version.so

LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule watchdog_module modules/mod_watchdog.so

#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin postmaster@localhost

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName localhost:9090

#ServerName localhost:80

#

# Deny access to the entirety of your server's filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

#

<Directory />

    AllowOverride none

    Require all denied

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

#D:\git\store\vue-07-26-cli\vue-cli\dist

#D:\git\store

DocumentRoot "D:\git\store\vue-07-26-cli\vue-cli\dist"

<Directory "D:\git\store\vue-07-26-cli\vue-cli\dist">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.4/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks Includes ExecCGI

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   AllowOverride FileInfo AuthConfig Limit

    #

    AllowOverride All

    #

    # Controls who can get stuff from this server.

    #

    Require all granted

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \

                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \

                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<Files ".ht*">

    Require all denied

</Files>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    #CustomLog "logs/access.log" common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    CustomLog "logs/access.log" combined

</IfModule>

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "C:/userTool/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock cgisock

</IfModule>

#

# "C:/userTool/xampp/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "D:\git\store\vue-07-26-cli\vue-cli\dist">

    Options Indexes FollowSymLinks Includes ExecCGI

    AllowOverride All

    Require all granted

</Directory>

<IfModule headers_module>

    #

    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied

    # backend servers which have lingering "httpoxy" defects.

    # 'Proxy' request header is undefined by the IETF, not listed by IANA

    #

    RequestHeader unset Proxy early

</IfModule>

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig conf/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    AddType text/html .shtml

    AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

<IfModule mime_magic_module>

    #

    # The mod_mime_magic module allows the server to use various hints from the

    # contents of the file itself to determine its type.  The MIMEMagicFile

    # directive tells the module where the hint definitions are located.

    #

    MIMEMagicFile "conf/magic"

</IfModule>

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or one of the special

# values 'default', 'none' or 'unlimited'.

# Default setting is to accept 200 Ranges.

#MaxRanges unlimited

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults: EnableMMAP On, EnableSendfile Off

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

Include conf/extra/httpd-mpm.conf

# Multi-language error messages

Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

Include conf/extra/httpd-autoindex.conf

# Language settings

Include conf/extra/httpd-languages.conf

# User home directories

Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

Include conf/extra/httpd-info.conf

# Virtual hosts

Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Implements a proxy/gateway for Apache.

Include "conf/extra/httpd-proxy.conf"

# Various default settings

Include "conf/extra/httpd-default.conf"

# XAMPP settings

Include "conf/extra/httpd-xampp.conf"

# Configure mod_proxy_html to understand HTML4/XHTML1

<IfModule proxy_html_module>

Include conf/extra/proxy-html.conf

</IfModule>

# Secure (SSL/TLS) connections

Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

# XAMPP: We disable operating system specific optimizations for a listening

# socket by the http protocol here. IE 64 bit make problems without this.

AcceptFilter http none

AcceptFilter https none

# AJP13 Proxy

<IfModule mod_proxy.c>

<IfModule mod_proxy_ajp.c>

Include "conf/extra/httpd-ajp.conf"

</IfModule>

</IfModule>

　　2.httpd-vhosts.conf

# Virtual Hosts

#

# Required modules: mod_log_config

# If you want to maintain multiple domains/hostnames on your

# machine you can setup VirtualHost containers for them. Most configurations

# use only name-based virtual hosts so the server doesn't need to worry about

# IP addresses. This is indicated by the asterisks in the directives below.

#

# Please see the documentation at

# <URL:http://httpd.apache.org/docs/2.4/vhosts/>

# for further details before you try to setup virtual hosts.

#

# You may use the command line option '-S' to verify your virtual host

# configuration.

#

# Use name-based virtual hosting.

#

##NameVirtualHost *:80

#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

# The first VirtualHost section is used for all requests that do not

# match a ##ServerName or ##ServerAlias in any <VirtualHost> block.

#

##<VirtualHost *:90>

    ##ServerAdmin webmaster@dummy-host.example.com

    ##DocumentRoot "D:/git/store/typeScript-Egret-test02"

    ##ServerName www.ttttimer.com

    ##ServerAlias www.dummy-host.example.com

    ##ErrorLog "logs/dummy-host.example.com-error.log"

    ##CustomLog "logs/dummy-host.example.com-access.log" common

##</VirtualHost>

NameVirtualHost *:9090

<VirtualHost *:9090>

    ServerAdmin webmaster@dummy-host.localhost

    DocumentRoot "D:\git\store\vue-07-26-cli\vue-cli\dist"

    ServerName www.tongtong.com

    ServerAlias *.www.tongtong.com

    ErrorLog "logs/localhost-error_log"

</VirtualHost>

##<VirtualHost *:80>

    ##ServerAdmin webmaster@dummy-host.localhost

    ##DocumentRoot "D:\git\store\vue-07-26-cli\vue-cli\dist"

    ##ServerName www.tongtong.com

    ##ServerAlias *.www.tongtong.com

    ##ErrorLog "logs/localhost-error_log"

##</VirtualHost>

##<VirtualHost *:80>

    ##ServerAdmin webmaster@dummy-host2.example.com

    ##DocumentRoot "C:/userTool/xampp/htdocs/dummy-host2.example.com"

    ##ServerName dummy-host2.example.com

    ##ErrorLog "logs/dummy-host2.example.com-error.log"

    ##CustomLog "logs/dummy-host2.example.com-access.log" common

##</VirtualHost>

　　3.项目位置创建.htaccess

<IfModule mod_rewrite.c>

RewriteEngine On

RewriteBase /

RewriteRule ^index.html$ - [L]

RewriteCond %{REQUEST_FILENAME} !-f

RewriteCond %{REQUEST_FILENAME} !-d

RewriteRule . /index.html [L]

</IfModule>

　　4.

vue -本地服务配置的更多相关文章

  1. 12. Vue搭建本地服务

    一. 搭建本地服务器 本地服务可以提高开发效率. webpack不需要每次都打包, 就可以看到修改后的效果. 本地服务器基于node.js搭建, 内部使用二十express框架. 可以实现让浏览器自动 ...

  2. 本地Redis服务配置

    本地Redis服务配置 要求:在虚拟机中启动redis服务,并要在windows物理机上取得链接 虚拟机安装略,(结果如下) windows工作机上装了Oracle VM VirtualBox,并在其 ...

  3. 【vue】http-server开启本地服务

    在写前端页面中,经常会在浏览器运行HTML页面,从本地文件夹中直接打开的一般都是file协议,当代码中存在http或https的链接时,HTML页面就无法正常打开,为了解决这种情况,需要在在本地开启一 ...

  4. vue入门全局配置

    全局配置 Vue.config 是一个对象,包含 Vue 的全局配置.可以在启动应用之前修改下列属性: silent 类型:boolean 默认值:false 用法: Vue.config.silen ...

  5. Vue（SPA） WebPack模块化打包、SEO优化（Vue SSR服务端同构直出）、全浏览器兼容完整解决方案

    白驹过隙,时光荏苒 大概去年这个时候写了angular 结合webpack的一套前端方案,今年此时祭出vue2结合webpack的一套前端方案. 明年的这个时候我又是在做什么... 读在最前面: 1. ...

  6. VUE前端项目配置代理解决跨域问题

    VUE前端项目配置代理解决跨域问题 问题如下,经常在本地调试接口出现这种问题 解决方式1:Chrome 的扩展插件 以前使用Chrome 的扩展插件,但是有时候还是会出现莫名其妙的问题. 需要梯子才行 ...

  7. 在vue项目中配置webpack

    首先我们来看一下使用Vue-cli2与Vue-cli2之后的版本(这里以Vue-cli4版本为例)创建项目目录结构的不同: Vue-cli2(左图)与Vue-cli4(右图)创建项目的目录 从上图可以 ...

  8. Python 启动本地服务

    在 Linux 服务器上或安装了 Python 的机器上,Python自带了一个WEB服务器 SimpleHTTPServer,我们可以很简单的使用  python -m SimpleHTTPServ ...

  9. Linux vsftpd服务配置具体解释

    [背景] 近日.一朋友dominoserver要进行升级.迁移,搭建了linux測试系统,也开启vsftpd服务,但是配置的ftp账号,程序无法正常下载附件. [问题跟踪] 通过ftpclient连接 ...

随机推荐

  1. 前端基础之HTML快速入门

    什么是 HTML? HTML 是用来描述网页的一种语言. HTML 指的是超文本标记语言 (Hyper Text Markup Language) HTML 不是一种编程语言,而是一种标记语言 (ma ...

  2. chrome 45以上flash被拦截的一种可能解决方案

    chrome 45以上不自动播放"非必要"flash的一种可能解决方案chrome 45以上flash被拦截的一种可能解决方案 问题 1.chrome 45以上(包含45)版本默认 ...

  3. PHP与MySqli

    一:链接数据库: $mysqli=@new mysqli("localhost","root","123456","msqldb& ...

  4. SEO之H1，H2，H3，H4....STRONG使用方法

    作为一个SEO从业人员,我们不仅仅是要懂得如何通过网站内容和外链等SEO手段,其实一个优秀的SEOER在从事一个SEO案例时,首先着手的是如何从网站程序本身来打好网站SEO基础. 在平时和很多朋友的交 ...

  5. Spring的IOC原理 通俗解释

    1. IoC理论的背景我们都知道,在采用面向对象方法设计的软件系统中,它的底层实现都是由N个对象组成的,所有的对象通过彼此的合作,最终实现系统的业务逻辑. 图1:软件系统中耦合的对象 如果我们打开机械 ...

  6. sql 防注入 维基百科

    http://zh.wikipedia.org/wiki/SQL%E8%B3%87%E6%96%99%E9%9A%B1%E7%A2%BC%E6%94%BB%E6%93%8A SQL攻击(SQL inj ...

  7. Android启动过程中背景图片显示

    转自:http://blog.csdn.net/zhangzhikaixinya/article/details/17001321 大部分Android App启动过程中,都会设置一个背景图片,直到A ...

  8. 关于java泛型的使用方式。。。。

    转自:http://onewebsql.com/blog/generics-extends-super 以下基本够用了 Today we continue our mini-series on Jav ...

  9. css属性所对应js属性

    document.getElementById("xx").style.xxx中的所有属性是什么,css对应js: 盒子标签和属性对照 CSS语法(不区分大小写) JavaScri ...

  10. 廖雪峰Java1-2程序基础-1基本结构

    1.类名 类名首字母大写 类名必须是英文字母.数字和下划线的组合 类名必须是以英文字母开头 好的命名:Hello NoteBook VRPlayer 不好的命名:hello 跟无意义的数字Good12 ...