[root@wifi_radiusdproxy_16 raddb]# cat users
#
# Please read the documentation file ../doc/processing_users_file,
# or 'man 5 users' (after installing the server) for more information.
#
# This file contains authentication security and configuration
# information for each user. Accounting requests are NOT processed
# through this file. Instead, see 'acct_users', in this directory.
#
# The first field is the user's name and can be up to
# characters in length. This is followed (on the same line) with
# the list of authentication requirements for that user. This can
# include password, comm server name, comm server port number, protocol
# type (perhaps set by the "hints" file), and huntgroup name (set by
# the "huntgroups" file).
#
# If you are not sure why a particular reply is being sent by the
# server, then run the server in debugging mode (radiusd -X), and
# you will see which entries in this file are matched.
#
# When an authentication request is received from the comm server,
# these values are tested. Only the first match is used unless the
# "Fall-Through" variable is set to "Yes".
#
# A special user named "DEFAULT" matches on all usernames.
# You can have several DEFAULT entries. All entries are processed
# in the order they appear in this file. The first entry that
# matches the login-request will stop processing unless you use
# the Fall-Through variable.
#
# If you use the database support to turn this file into a .db or .dbm
# file, the DEFAULT entries _have_ to be at the end of this file and
# you can't have multiple entries for one username.
#
# Indented (with the tab character) lines following the first
# line indicate the configuration values to be passed back to
# the comm server to allow the initiation of a user session.
# This can include things like the PPP configuration values
# or the host to log the user onto.
#
# You can include another `users' file with `$INCLUDE users.other'
# #
# For a list of RADIUS attributes, and links to their definitions,
# see:
#
# http://www.freeradius.org/rfc/attributes.html
# #
# Deny access for a specific user. Note that this entry MUST
# be before any other 'Auth-Type' attribute which results in the user
# being authenticated.
#
# Note that there is NO 'Fall-Through' attribute, so the user will not
# be given any additional resources.
#
#lameuser Auth-Type := Reject
# Reply-Message = "Your account has been disabled." #
# Deny access for a group of users.
#
# Note that there is NO 'Fall-Through' attribute, so the user will not
# be given any additional resources.
#
#DEFAULT Group == "disabled", Auth-Type := Reject
# Reply-Message = "Your account has been disabled."
# #
# This is a complete entry for "steve". Note that there is no Fall-Through
# entry so that no DEFAULT entry will be used, and the user will NOT
# get any attributes in addition to the ones listed here.
#
#steve Cleartext-Password := "testing"
# Service-Type = Framed-User,
# Framed-Protocol = PPP,
# Framed-IP-Address = 172.16.3.33,
# Framed-IP-Netmask = 255.255.255.0,
# Framed-Routing = Broadcast-Listen,
# Framed-Filter-Id = "std.ppp",
# Framed-MTU = ,
# Framed-Compression = Van-Jacobsen-TCP-IP #
# This is an entry for a user with a space in their name.
# Note the double quotes surrounding the name.
#
#"John Doe" Cleartext-Password := "hello"
# Reply-Message = "Hello, %{User-Name}" #
# Dial user back and telnet to the default host for that port
#
#Deg Cleartext-Password := "ge55ged"
# Service-Type = Callback-Login-User,
# Login-IP-Host = 0.0.0.0,
# Callback-Number = "9,5551212",
# Login-Service = Telnet,
# Login-TCP-Port = Telnet #
# Another complete entry. After the user "dialbk" has logged in, the
# connection will be broken and the user will be dialed back after which
# he will get a connection to the host "timeshare1".
#
#dialbk Cleartext-Password := "callme"
# Service-Type = Callback-Login-User,
# Login-IP-Host = timeshare1,
# Login-Service = PortMaster,
# Callback-Number = "9,1-800-555-1212" #
# user "swilson" will only get a static IP number if he logs in with
# a framed protocol on a terminal server in Alphen (see the huntgroups file).
#
# Note that by setting "Fall-Through", other attributes will be added from
# the following DEFAULT entries
#
#swilson Service-Type == Framed-User, Huntgroup-Name == "alphen"
# Framed-IP-Address = 192.168.1.65,
# Fall-Through = Yes #
# If the user logs in as 'username.shell', then authenticate them
# using the default method, give them shell access, and stop processing
# the rest of the file.
#
#DEFAULT Suffix == ".shell"
# Service-Type = Login-User,
# Login-Service = Telnet,
# Login-IP-Host = your.shell.machine #
# The rest of this file contains the several DEFAULT entries.
# DEFAULT entries match with all login names.
# Note that DEFAULT entries can also Fall-Through (see first entry).
# A name-value pair from a DEFAULT entry will _NEVER_ override
# an already existing name-value pair.
# #
# Set up different IP address pools for the terminal servers.
# Note that the "+" behind the IP address means that this is the "base"
# IP address. The Port-Id (S0, S1 etc) will be added to it.
#
#DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen"
# Framed-IP-Address = 192.168.1.32+,
# Fall-Through = Yes #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft"
# Framed-IP-Address = 192.168.2.32+,
# Fall-Through = Yes #
# Sample defaults for all framed connections.
#
#DEFAULT Service-Type == Framed-User
# Framed-IP-Address = 255.255.255.254,
# Framed-MTU = ,
# Service-Type = Framed-User,
# Fall-Through = Yes #
# Default for PPP: dynamic IP address, PPP mode, VJ-compression.
# NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
# by the terminal server in which case there may not be a "P" suffix.
# The terminal server sends "Framed-Protocol = PPP" for auto PPP.
#
DEFAULT Framed-Protocol == PPP
Framed-Protocol = PPP,
Framed-Compression = Van-Jacobson-TCP-IP #
# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
#
#DEFAULT Hint == "CSLIP"
# Framed-Protocol = SLIP,
# Framed-Compression = Van-Jacobson-TCP-IP #
# Default for SLIP: dynamic IP address, SLIP mode.
#
#DEFAULT Hint == "SLIP"
# Framed-Protocol = SLIP #
# Last default: rlogin to our main server.
#
#DEFAULT
# Service-Type = Login-User,
# Login-Service = Rlogin,
# Login-IP-Host = shellbox.ispdomain.com # #
# # Last default: shell on the local terminal server.
# #
# DEFAULT
# Service-Type = Administrative-User # On no match, the user is denied access.
DEFAULT Auth-Type := "Accept"
Reply-Message = "Bypass Success Auth User For Remote AAA Fail."

freeRadius设置任意账号密码认证通过的更多相关文章

  1. Git设置记住账号密码

    Git设置记住账号密码 添加如下配置 [credential] helper = store

  2. 设置administrator账号密码

    设置administrator账号密码: 打开:附件->运行 输入:lusrmgr.msc 在里面的用户里修改administrator密码

  3. ubuntu设置root账号密码

    Ubuntu Linux有一个与众不同的特点,那就是初次使用时,你无法作为root来登录系统,为什么会这样?这就要从系统的安装说起.对于其他Linux系统来 说,一般在安装过程就设定root密码,这样 ...

  4. keycloak~账号密码认证和授权码认证

    用户名密码登录 POST /auth/realms/demo/protocol/openid-connect/token 请求体 x-www-form-urlencoded grant_type:pa ...

  5. chromedriver 代理设置(账号密码)

    在使用selenium时遇到的一个问题 如何为chromedriver设置有密码的代理 在借鉴了stackoverflow上的答案 background.js var config = { mode: ...

  6. mongodb副本集加分片集群安全认证使用账号密码登录

    mongodb副本集加分片集群搭建网上资料有很多.粘贴一个写的比较好的.副本集加分片搭建 对于搭建好的mongodb副本集加分片集群,为了安全,启动安全认证,使用账号密码登录. 默认的mongodb是 ...

  7. 802.1X 账号密码+设备信息双重认证

    名词解释 802.1X: IEEE802 LAN/WAN 委员会为解决无线局域网网络安全问题,提出了 802.1X 协议.后来,802.1X协议作为局域网端口的一个普通接入控制机制在以太网中被广泛应用 ...

  8. PostgreSQL远程连接配置管理/账号密码分配(解决:致命错误: 用户 "postgres" Ident 认证失败)

    问题:致命错误: 用户 "postgres" Ident 认证失败 说明:这个是由于没有配置远程访问且认证方式没改造成的,只需要更改使用账号密码认证即可. 解决:找到pg_hba. ...

  9. Linux环境下,MongoDB 3.6.10 的安装步骤,以及设置用户和密码,配置随处执行mongo命令启动客户端,以及所遇到的问题

    https://blog.csdn.net/qinaye/article/details/87920651 二.设置MongoDB用户和密码2.1 利用./mongo命令连接mongoDB客户端../ ...

随机推荐

  1. Java 静态static关键字,main函数,对象的初始化过程,对象调用成员,单例模式的设计,静态代码块(6)

    Java 静态static关键字,静态代码块详情参考:static的使用原理讲解http://www.cnblogs.com/itcqx/p/5519464.html main函数: java Mai ...

  2. 如何解决Tomcat端口号被占用

    在eclipse中配置好tomcat服务器后,启动时提示错误如下图 提示端口被占用. 第一种方法: 结束占用端口的进程 第一步:netstat -aon|findstr "端口号" ...

  3. ubuntu下git的使用

    1.安装git sudo apt-get install git sudo apt-get install git-core 2.配置git lzb@lzb:~$ git config --globa ...

  4. css,js,jquery的载入方式和属性控制

    本文章主要总结了css,js,jQuery在编写程序时的载入方式,与属性控制方式html和css共同组成了一个最基础的网页,js为标签样式提供动态效果 一,css的载入方式与属性控制 1.1,css引 ...

  5. Java 创建类的过程

    创建对象过程: 堆分配父类空间 堆分类子类空间 属性初始化 调用构造方法(第一行是调用父类构造方法)

  6. 实践一次有趣的sql优化

    课程表 #课程表 create table Course( c_id int PRIMARY KEY, name varchar(10) ) 增加 100 条数据 #增加课程表100条数据 DROP ...

  7. servlet 3 通过编程的方式来配置ServletContext

    你是否再为配置文件web.xml容易出错而烦恼?是否为web.xml文件存放位置而不知所措?是否为web.xml为什么要这样配?怎么才能更好的配置web.xml而烦恼?那么一种新的方式出现了: spr ...

  8. SVN服务器的搭建(三)

    接下来,试试用TortoiseSVN修改文件,添加文件,删除文件,以及如何解决冲突等. 添加文件 在检出的工作副本中添加一个Readme.txt文本文件,这时候这个文本文件会显示为没有版本控制的状态, ...

  9. UG NX7.5 采用VS2008调试方法

    1.安装NX7.5(x64),这是废话 2.安装visual studio 2008,推荐安装2008,如果是2010应该也可以用,(没有测试,不清楚) 3.复制 UGS\NX 7.5\UGOPEN\ ...

  10. zabbix3.4--监控TCP十一种状态

    1.客户端自定义key[root@web01 /etc/zabbix/zabbix_agentd.d]#vim iotps.conf UserParameter=TCP_STATUS_ESTABLIS ...