appendToFile

Usage: hdfs dfs -appendToFile <localsrc> ... <dst>

追加一个或者多个文件到hdfs制定文件中.也可以从命令行读取输入.

  • hdfs dfs -appendToFile localfile /user/hadoop/hadoopfile
  • hdfs dfs -appendToFile localfile1 localfile2 /user/hadoop/hadoopfile
  • hdfs dfs -appendToFile localfile hdfs://nn.example.com/hadoop/hadoopfile
  • hdfs dfs -appendToFile - hdfs://nn.example.com/hadoop/hadoopfile Reads the input from stdin.

Exit Code:

Returns 0 on success and 1 on error.

cat

Usage: hdfs dfs -cat URI [URI ...]

查看内容.

Example:

  • hdfs dfs -cat hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2
  • hdfs dfs -cat file:///file3 /user/hadoop/file4

Exit Code:

Returns 0 on success and -1 on error.

Chgrp【change group】

Usage: hdfs dfs -chgrp [-R] GROUP URI [URI ...]

修改所属组.

Options

  • The -R option will make the change recursively through the directory structure.

chmod

Usage: hdfs dfs -chmod [-R] <MODE[,MODE]... | OCTALMODE> URI [URI ...]

修改权限.

Options

  • The -R option will make the change recursively through the directory structure.

chown

Usage: hdfs dfs -chown [-R] [OWNER][:[GROUP]] URI [URI ]

修改所有者.

Options

  • The -R option will make the change recursively through the directory structure.

copyFromLocal

Usage: hdfs dfs -copyFromLocal <localsrc> URI

Similar to put command, except that the source is restricted to a local file reference.

Options:

  • The -f option will overwrite the destination if it already exists.

copyToLocal

Usage: hdfs dfs -copyToLocal [-ignorecrc] [-crc] URI <localdst>

Similar to get command, except that the destination is restricted to a local file reference.

count

Usage: hdfs dfs -count [-q] [-h] <paths>

列出文件夹数量、文件数量、内容大小. The output columns with -count are: DIR_COUNT, FILE_COUNT, CONTENT_SIZE FILE_NAME

The output columns with -count -q are: QUOTA, REMAINING_QUATA, SPACE_QUOTA, REMAINING_SPACE_QUOTA, DIR_COUNT, FILE_COUNT, CONTENT_SIZE, FILE_NAME

The -h option shows sizes in human readable format.

Example:

  • hdfs dfs -count hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2
  • hdfs dfs -count -q hdfs://nn1.example.com/file1
  • hdfs dfs -count -q -h hdfs://nn1.example.com/file1

Exit Code:

Returns 0 on success and -1 on error.

cp

Usage: hdfs dfs -cp [-f] [-p | -p[topax]] URI [URI ...] <dest>

复制文件(夹),可以覆盖,可以保留原有权限信息

Options:

  • The -f option will overwrite the destination if it already exists.
  • The -p option will preserve file attributes [topx] (timestamps, ownership, permission, ACL, XAttr). If -p is specified with no arg, then preserves timestamps, ownership, permission. If -pa is specified, then preserves permission also because ACL is a super-set of permission. Determination of whether raw namespace extended attributes are preserved is independent of the -p flag.

Example:

  • hdfs dfs -cp /user/hadoop/file1 /user/hadoop/file2
  • hdfs dfs -cp /user/hadoop/file1 /user/hadoop/file2 /user/hadoop/dir

Exit Code:

Returns 0 on success and -1 on error.

du

Usage: hdfs dfs -du [-s] [-h] URI [URI ...]

显示文件(夹)大小.

Options:

  • The -s option will result in an aggregate summary of file lengths being displayed, rather than the individual files.
  • The -h option will format file sizes in a "human-readable" fashion (e.g 64.0m instead of 67108864)

Example:

  • hdfs dfs -du /user/hadoop/dir1 /user/hadoop/file1 hdfs://nn.example.com/user/hadoop/dir1

Exit Code: Returns 0 on success and -1 on error.

dus

Usage: hdfs dfs -dus <args>

Displays a summary of file lengths.

Note: This command is deprecated. Instead use hdfs dfs -du -s.

expunge

Usage: hdfs dfs -expunge

清空回收站.

get

Usage: hdfs dfs -get [-ignorecrc] [-crc] <src> <localdst>

Copy files to the local file system. Files that fail the CRC check may be copied with the -ignorecrc option. Files and CRCs may be copied using the -crc option.

Example:

  • hdfs dfs -get /user/hadoop/file localfile
  • hdfs dfs -get hdfs://nn.example.com/user/hadoop/file localfile

Exit Code:

Returns 0 on success and -1 on error.

getfacl

Usage: hdfs dfs -getfacl [-R] <path>

显示权限信息.

Options:

  • -R: List the ACLs of all files and directories recursively.
  • path: File or directory to list.

Examples:

  • hdfs dfs -getfacl /file
  • hdfs dfs -getfacl -R /dir

Exit Code:

Returns 0 on success and non-zero on error.

getfattr

Usage: hdfs dfs -getfattr [-R] -n name | -d [-e en] <path>

Displays the extended attribute names and values (if any) for a file or directory.

Options:

  • -R: Recursively list the attributes for all files and directories.
  • -n name: Dump the named extended attribute value.
  • -d: Dump all extended attribute values associated with pathname.
  • -e encoding: Encode values after retrieving them. Valid encodings are "text", "hex", and "base64". Values encoded as text strings are enclosed in double quotes ("), and values encoded as hexadecimal and base64 are prefixed with 0x and 0s, respectively.
  • path: The file or directory.

Examples:

  • hdfs dfs -getfattr -d /file
  • hdfs dfs -getfattr -R -n user.myAttr /dir

Exit Code:

Returns 0 on success and non-zero on error.

getmerge

Usage: hdfs dfs -getmerge <src> <localdst> [addnl]

合并.

ls

Usage: hdfs dfs -ls [-R] <args>

Options:

  • The -R option will return stat recursively through the directory structure.

For a file returns stat on the file with the following format:

permissions number_of_replicas userid groupid filesize modification_date modification_time filename

For a directory it returns list of its direct children as in Unix. A directory is listed as:

permissions userid groupid modification_date modification_time dirname

Example:

  • hdfs dfs -ls /user/hadoop/file1

Exit Code:

Returns 0 on success and -1 on error.

lsr

Usage: hdfs dfs -lsr <args>

Recursive version of ls.

Note: This command is deprecated. Instead use hdfs dfs -ls -R

mkdir

Usage: hdfs dfs -mkdir [-p] <paths>

Takes path uri's as argument and creates directories.

Options:

  • The -p option behavior is much like Unix mkdir -p, creating parent directories along the path.

Example:

  • hdfs dfs -mkdir /user/hadoop/dir1 /user/hadoop/dir2
  • hdfs dfs -mkdir hdfs://nn1.example.com/user/hadoop/dir hdfs://nn2.example.com/user/hadoop/dir

Exit Code:

Returns 0 on success and -1 on error.

moveFromLocal

Usage: hdfs dfs -moveFromLocal <localsrc> <dst>

Similar to put command, except that the source localsrc is deleted after it's copied.

moveToLocal

Usage: hdfs dfs -moveToLocal [-crc] <src> <dst>

Displays a "Not implemented yet" message.

mv

Usage: hdfs dfs -mv URI [URI ...] <dest>

Moves files from source to destination. This command allows multiple sources as well in which case the destination needs to be a directory. Moving files across file systems is not permitted.

Example:

  • hdfs dfs -mv /user/hadoop/file1 /user/hadoop/file2
  • hdfs dfs -mv hdfs://nn.example.com/file1 hdfs://nn.example.com/file2 hdfs://nn.example.com/file3 hdfs://nn.example.com/dir1

Exit Code:

Returns 0 on success and -1 on error.

put

Usage: hdfs dfs -put <localsrc> ... <dst>

Copy single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and writes to destination file system.

  • hdfs dfs -put localfile /user/hadoop/hadoopfile
  • hdfs dfs -put localfile1 localfile2 /user/hadoop/hadoopdir
  • hdfs dfs -put localfile hdfs://nn.example.com/hadoop/hadoopfile
  • hdfs dfs -put - hdfs://nn.example.com/hadoop/hadoopfile Reads the input from stdin.

Exit Code:

Returns 0 on success and -1 on error.

rm

Usage: hdfs dfs -rm [-f] [-r|-R] [-skipTrash] URI [URI ...]

Delete files specified as args.

Options:

  • The -f option will not display a diagnostic message or modify the exit status to reflect an error if the file does not exist.
  • The -R option deletes the directory and any content under it recursively.
  • The -r option is equivalent to -R.
  • The -skipTrash option will bypass trash, if enabled, and delete the specified file(s) immediately. This can be useful when it is necessary to delete files from an over-quota directory.

Example:

  • hdfs dfs -rm hdfs://nn.example.com/file /user/hadoop/emptydir

Exit Code:

Returns 0 on success and -1 on error.

rmr

Usage: hdfs dfs -rmr [-skipTrash] URI [URI ...]

Recursive version of delete.

Note: This command is deprecated. Instead use hdfs dfs -rm -r

setfacl

Usage: hdfs dfs -setfacl [-R] [-b|-k -m|-x <acl_spec> <path>]|[--set <acl_spec> <path>]

Sets Access Control Lists (ACLs) of files and directories.

Options:

  • -b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
  • -k: Remove the default ACL.
  • -R: Apply operations to all files and directories recursively.
  • -m: Modify ACL. New entries are added to the ACL, and existing entries are retained.
  • -x: Remove specified ACL entries. Other ACL entries are retained.
  • --set: Fully replace the ACL, discarding all existing entries. The acl_spec must include entries for user, group, and others for compatibility with permission bits.
  • acl_spec: Comma separated list of ACL entries.
  • path: File or directory to modify.

Examples:

  • hdfs dfs -setfacl -m user:hadoop:rw- /file
  • hdfs dfs -setfacl -x user:hadoop /file
  • hdfs dfs -setfacl -b /file
  • hdfs dfs -setfacl -k /dir
  • hdfs dfs -setfacl --set user::rw-,user:hadoop:rw-,group::r--,other::r-- /file
  • hdfs dfs -setfacl -R -m user:hadoop:r-x /dir
  • hdfs dfs -setfacl -m default:user:hadoop:r-x /dir

Exit Code:

Returns 0 on success and non-zero on error.

setfattr

Usage: hdfs dfs -setfattr -n name [-v value] | -x name <path>

Sets an extended attribute name and value for a file or directory.

Options:

  • -b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
  • -n name: The extended attribute name.
  • -v value: The extended attribute value. There are three different encoding methods for the value. If the argument is enclosed in double quotes, then the value is the string inside the quotes. If the argument is prefixed with 0x or 0X, then it is taken as a hexadecimal number. If the argument begins with 0s or 0S, then it is taken as a base64 encoding.
  • -x name: Remove the extended attribute.
  • path: The file or directory.

Examples:

  • hdfs dfs -setfattr -n user.myAttr -v myValue /file
  • hdfs dfs -setfattr -n user.noValue /file
  • hdfs dfs -setfattr -x user.myAttr /file

Exit Code:

Returns 0 on success and non-zero on error.

setrep

Usage: hdfs dfs -setrep [-R] [-w] <numReplicas> <path>

Changes the replication factor of a file. If path is a directory then the command recursively changes the replication factor of all files under the directory tree rooted at path.

Options:

  • The -w flag requests that the command wait for the replication to complete. This can potentially take a very long time.
  • The -R flag is accepted for backwards compatibility. It has no effect.

Example:

  • hdfs dfs -setrep -w 3 /user/hadoop/dir1

Exit Code:

Returns 0 on success and -1 on error.

stat

Usage: hdfs dfs -stat URI [URI ...]

Returns the stat information on the path.

Example:

  • hdfs dfs -stat path

Exit Code: Returns 0 on success and -1 on error.

tail

Usage: hdfs dfs -tail [-f] URI

Displays last kilobyte of the file to stdout.

Options:

  • The -f option will output appended data as the file grows, as in Unix.

Example:

  • hdfs dfs -tail pathname

Exit Code: Returns 0 on success and -1 on error.

test

Usage: hdfs dfs -test -[ezd] URI

Options:

  • The -e option will check to see if the file exists, returning 0 if true.
  • The -z option will check to see if the file is zero length, returning 0 if true.
  • The -d option will check to see if the path is directory, returning 0 if true.

Example:

  • hdfs dfs -test -e filename

text

Usage: hdfs dfs -text <src>

Takes a source file and outputs the file in text format. The allowed formats are zip and TextRecordInputStream.

touchz

Usage: hdfs dfs -touchz URI [URI ...]

Create a file of zero length.

Example:

  • hdfs dfs -touchz pathname

Exit Code: Returns 0 on success and -1 on error.

bin/hdfs dfs命令的更多相关文章

  1. bin/hdfs dfs命令存在WARN util.NativeCodeLoader问题消除方法

    例如:[hadoop@db01 hadoop-2.5.0]$ bin/hdfs dfs -ls17/03/01 21:50:33 WARN util.NativeCodeLoader: Unable ...

  2. Hadoop:hadoop fs、hadoop dfs与hdfs dfs命令的区别

    http://blog.csdn.net/pipisorry/article/details/51340838 'Hadoop DFS'和'Hadoop FS'的区别 While exploring ...

  3. 云计算--hdfs dfs 命令

    在hadoop安装目录下:/hadoop2/hadoop-2.7.3 1.创建目录 bin/hdfs dfs -mkdir /user bin/hdfs dfs -mkdir /user/<us ...

  4. Hadoop点滴-何时使用hadoop fs、hadoop dfs与hdfs dfs命令

    何时使用hadoop fs.hadoop dfs与hdfs dfs命令 编辑 删除 hadoop fs:使用面最广,可以操作任何文件系统. hadoop dfs与hdfs dfs:只能操作HDFS文件 ...

  5. 何时使用hadoop fs、hadoop dfs与hdfs dfs命令(转)

    hadoop fs:使用面最广,可以操作任何文件系统. hadoop dfs与hdfs dfs:只能操作HDFS文件系统相关(包括与Local FS间的操作),前者已经Deprecated,一般使用后 ...

  6. 何时使用hadoop fs、hadoop dfs与hdfs dfs命令

    hadoop fs:使用面最广,可以操作任何文件系统. hadoop dfs与hdfs dfs:只能操作HDFS文件系统相关(包括与Local FS间的操作),前者已经Deprecated,一般使用后 ...

  7. Hdfs dfs命令使用

    如果是把数据放在了hdfs系统,那么我们如何访问他们呢? 1.hdfs查看文件夹 ./hdfs dfs -ls hdfs://mycluster/output/online/ 2.hdfs创建目录df ...

  8. hadoop fs、hadoop dfs与hdfs dfs命令的区别

    Hadoop fs:使用面最广,可以操作任何文件系统. hadoop dfs与hdfs dfs:只能操作HDFS文件系统相关(包括与Local FS间的操作),前者已经Deprecated,一般使用后 ...

  9. hdfs shell 命令以及原理

    shell 操作 dfs 上传[hadoop@namenode ~]$ /data/hadoop/bin/hadoop fs -put /opt/MegaRAID/MegaCli/MegaCli64 ...

随机推荐

  1. [CQOI 2018]社交网络

    Description 题库链接 求 \(n\) 个点以 \(1\) 为根的有向生成树个数. \(1\leq n\leq 250\) Solution 我终于会 \(\texttt{Matrix-Tr ...

  2. java开学考试感想及代码

    上周四我们的第一节java课,王老师给我们进行啦开学考试,这也是上学期放假之前给我们约定好的 但是情况显然没有我想的那么好,其实我觉得这个atm系统比上届学生信息管理系统难的多,上届的话毕竟有小学期的 ...

  3. git 找回 git reset --hard HEAD 后的代码

    下面方法只针对当你本地代码做了 git add 或则 git commit 后又手贱的重置本地代码到上一个版本,导致本地代码丢失的情况. 如果你没有 git add 命令,而直接 git reset ...

  4. npm saveError ENOENT: no such file or directory

    1.报错情况 在执行npm install xxx时,出现如下:npm WARN saveError ENOENT: no such file or directory, open '/nodetes ...

  5. Maven配置私服仓库

    首先就是,最基本的打开maven的配置文件,上面是我自己的习惯,多留一个以备不坏 打开setting配置文件,来修改路径(本人不习惯将所有软件放在C盘,一般都是单独存放盘) 接下来就是公司给你的账户和 ...

  6. hdu 2030 统计汉字个数

    汉字统计 Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)Total Submis ...

  7. EF CodeFirst 初识

    随着EntityFramework的发展,原先的三种方式,{Code First ,Model First,Database First }  CodeFirst基本摆脱了另外两种方式 成为了 最受欢 ...

  8. HwUI下载地址

    下载地址:HwUI.0.0.1.zip

  9. Hibernate初学

    什么是Hibernate? Hibernate,翻译过来是冬眠的意思,正好现在已经进入秋季,世间万物开始准备冬眠了.其实对于对象来说就是持久化. 我们从三个角度理解一下Hibernate: 一.Hib ...

  10. LK光流算法的三个假设

    在实际过程中采用 Lucas-Kanade 光流算法跟踪运动物体特征点的时候,一个很明显的特点是LK算法(包括其他光流算法)不能计算"大运动",加上金子塔的方法稍微好点. 这是什么 ...