Linux下Keepalived 安装与配置

Keepalived 安装与配置

一、环境说明

1、操作系统内核版本：2.6.9-78.ELsmp

2、Keepalived软件版本：keepalived-1.1.20.tar.gz

二、环境配置

1、主Keepalived服务器IP地址 192.168.111.223

2、备Keepalived服务器IP地址  192.168.111.100

3、Keepalived虚拟IP地址  192.168.111.150

三、软件下载地址

http://www.keepalived.org/software/keepalived-1.1.20.tar.gz

四、安装流程

1、上传Keepalived至/home/目录

2、解压Keepalived软件

[root@localhost home]# tar -zxvf keepalived-1.1.20.tar.gz

[root@localhost home]# cd keepalived-1.1.20

[root@localhost keepalived-1.1.20]# ln -s /usr/src/kernels/2.6.9-78.EL-i686/usr/src//linux

[root@localhost keepalived-1.1.20]# ./configure

3、提示

4、编译以及编译安装

[root@localhost keepalived-1.1.20]# make && make install

5、将types.h调用的部分注释掉即可解决4出现的问题

vi/usr/src/kernels/2.6.9-78.EL-i686/include/linux/types.h

到158行操作如下

#endif

6、重新编译以及编译安装

[root@localhost keepalived-1.1.20]# make && make install

7、修改配置文件路径

[root@localhostkeepalived-1.1.20]#cp/usr/local/etc/rc.d/init.d/keepalived/etc/rc.d/init.d/

[root@localhostkeepalived-1.1.20]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/

[root@localhost keepalived-1.1.20]# mkdir /etc/keepalived

[root@localhostkeepalived-1.1.20]#cp /usr/local/etc/keepalived/keepalived.conf/etc/keepalived/

[root@localhost keepalived-1.1.20]# cp /usr/local/sbin/keepalived /usr/sbin/

8、设置为服务，开机启动

[root@localhost keepalived-1.1.20]# vi /etc/rc.local

五、主Keepalived配置

1、修改配置文件

[root@localhost keepalived-1.1.20]# vi /etc/keepalived/keepalived.conf

六、备Keepalived配置

1、修改配置文件

七、启动服务

八、查看网卡信息

1、主Keepalived网卡信息

九、验证测试

1、在主服务器上新建一个网页，内容为 192.168.111.223

2、在备用服务器上新建一个网页，内容为 192.168.111.100

3、启动主备服务器的http服务和Keepalived服务

4、通过浏览数，输入虚拟IP地址 192.168.111.150

页面显示为 192.168.111.223

5、关闭主服务器的Keepalived服务，通过浏览器输入IP地址192.168.111.150

页面显示为 192.168.111.100

6、再次启动主服务器的Keepalived服务，通过浏览器输入IP地址192.168.111.150

页面显示为 192.168.111.223