Step by Step Guide on Yanhua ACDP Clear BMW EGS ISN

Yanhua Mini ACDP authorize new function on BMW EGS ISN clearing.So here UOBDII want to share this step-by-step guide for you.

Related Contents:

Yanhua Mini ACDP Read BMW MSV80 DME ISN

Yanhua ACDP Mini No Need Soldering BMW DME ISN Code Support List

CGDI BMW EGS ISN Clear and Synchronize Guide

What You Need?

Yanhua ACDP Basic Moduel

Clear EGS ISN Authorization for Yanhua ACDP

EGS module

Step 1:Build Connection between BMW EGS and Yanhua Mini ACDP Programmer.
Note:There are 3 methods,please choose according to your situation.

Connection Method 1:
Connect the 8HP end of the EGS interface board to the EGS module interface

Note:Aim the label point of the 8HP end of the interface board with the label point of the EGS interface during installation.

Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal

Note:Short the jumper cap to the “CAN-R-Join” end according to the marked position.
Connect the ACDP,OBP+ICP adapter,EGS interface board and EGS module

Connection Method 2:
Connect ACDP with vehicle OBDII port

Connection Method 3:

Connect ACDP to EGS interface according below diagram

Step 2:Clear BMW EGS ISN

Run Yanhua ACDP software and enter the menu to select “Clear EGS ISN”

Select “Clear ISN”,or if you have and problem please check the “Help” option

Done!