搭建高性能计算环境（四）、应用软件的安装之VASP

1，将需要的软件包上传vasp.5.2.12.tar.gz、vasp.5.lib.tar.gz、benchmark.Hg.tar.gz。

2，创建vasp目录并解压软件包。

mkdir /opt/vasp

cd /opt/vasp

tar xvf ~/vasp..lib.tar.gz

tar xvf ~/vasp.5.2..tar.gz

3,编译lib

cd vasp..lib/

cp makefile.linux_ifc_P4 makefile
修改makefile

make

修改后的makefile：

.SUFFIXES: .inc .f .F

#-----------------------------------------------------------------------

# Makefile for Portland Group F90/HPF compiler

# the makefile was tested only under Linux on Intel platforms

# however it might work on other platforms as well

#

# this release of vasp.4.lib contains lapack v2.0

# this can be compiled with pgf90 compiler if the option -O1 is used

#

# Mind: one user reported that he had to copy preclib.F diolib.F

#  dlexlib.F and drdatab.F to the directory vasp.4.4, compile the files

#  there and link them directly  into vasp

#  for no obvious reason these files could not be linked from the library

#

#-----------------------------------------------------------------------

# C-preprocessor

CPP     = gcc -E -P -C $*.F >$*.f

FC=ifort

CFLAGS = -O3

FFLAGS = -O3 -ip -no-prec-div -funrool-loops -xHost -heap-arrays 64

FREE   =  -FR

DOBJ =  preclib.o timing_.o derrf_.o dclock_.o  diolib.o dlexlib.o drdatab.o

#-----------------------------------------------------------------------

# general rules

#-----------------------------------------------------------------------

libdmy.a: $(DOBJ) lapack_double.o linpack_double.o lapack_atlas.o

        -rm libdmy.a

        ar vq libdmy.a $(DOBJ)

# files which do not require autodouble

lapack_min.o: lapack_min.f

        $(FC) $(FFLAGS) $(NOFREE) -c lapack_min.f

lapack_double.o: lapack_double.f

        $(FC) $(FFLAGS) $(NOFREE) -c lapack_double.f

lapack_single.o: lapack_single.f

        $(FC) $(FFLAGS) $(NOFREE) -c lapack_single.f

lapack_atlas.o: lapack_atlas.f

        $(FC) $(FFLAGS) $(NOFREE) -c lapack_atlas.f

linpack_double.o: linpack_double.f

        $(FC) $(FFLAGS) $(NOFREE) -c linpack_double.f

linpack_single.o: linpack_single.f

        $(FC) $(FFLAGS) $(NOFREE) -c linpack_single.f

.c.o:

        $(CC) $(CFLAGS) -c $*.c

.F.o:

        $(CPP)

        $(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f

.F.f:

        $(CPP)

.f.o:

        $(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f

4，编译vasp

cd  ../vasp.5.2/

cp makefile.linux_ifc_P4 makefile
修改makefile

make

修改后的makefile：

.SUFFIXES: .inc .f .f90 .F

#-----------------------------------------------------------------------

# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron

# bases systems

# we recommend this makefile for both Intel as well as AMD systems

# for AMD based systems appropriate BLAS and fftw libraries are

# however mandatory (whereas they are optional for Intel platforms)

#

# The makefile was tested only under Linux on Intel and AMD platforms

# the following compiler versions have been tested:

#  - ifc.7.1  works stable somewhat slow but reliably

#  - ifc.8.1  fails to compile the code properly

#  - ifc.9.1  recommended (both for 32 and 64 bit)

#  - ifc.10.1 partially recommended (both for 32 and 64 bit)

#             tested build 20080312 Package ID: l_fc_p_10.1.015

#             the gamma only mpi version can not be compiles

#             using ifc.10.1

#

# it might be required to change some of library pathes, since

# LINUX installation vary a lot

# Hence check ***ALL*** options in this makefile very carefully

#-----------------------------------------------------------------------

#

# BLAS must be installed on the machine

# there are several options:

# 1) very slow but works:

#   retrieve the lapackage from ftp.netlib.org

#   and compile the blas routines (BLAS/SRC directory)

#   please use g77 or f77 for the compilation. When I tried to

#   use pgf77 or pgf90 for BLAS, VASP hang up when calling

#   ZHEEV  (however this was with lapack 1.1 now I use lapack 2.0)

# 2) more desirable: get an optimized BLAS

#

# the two most reliable packages around are presently:

# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)

#     http://developer.intel.com/software/products/mkl/

#   this is really excellent, if you use Intel CPU's

#

# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,

#     around 30 GFlops on Quad core)

#   Kazushige Goto's BLAS

#   http://www.cs.utexas.edu/users/kgoto/signup_first.html

#   http://www.tacc.utexas.edu/resources/software/

#

#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90

SUFFIX=.f90

#-----------------------------------------------------------------------

# fortran compiler and linker

#-----------------------------------------------------------------------

FC=ifc

# fortran linker

FCL=$(FC)

#-----------------------------------------------------------------------

# whereis CPP ?? (I need CPP, can't use gcc with proper options)

# that's the location of gcc for SUSE 5.3

#

#  CPP_   =  /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C

#

# that's probably the right line for some Red Hat distribution:

#

#  CPP_   =  /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C

#

#  SUSE X.X, maybe some Red Hat distributions:

CPP_ =  ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

#-----------------------------------------------------------------------

# possible options for CPP:

# NGXhalf             charge density   reduced in X direction

# wNGXhalf            gamma point only reduced in X direction

# avoidalloc          avoid ALLOCATE if possible

# PGF90               work around some for some PGF90 / IFC bugs

# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD

# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)

# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)

# tbdyn                 MD package of Tomas  Bucko

#-----------------------------------------------------------------------

CPP     = $(CPP_)  -DHOST=\"LinuxIFC\" \

          -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \

#          -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------

# general fortran flags  (there must a trailing blank on this line)

# byterecl is strictly required for ifc, since otherwise

# the WAVECAR file becomes huge

#-----------------------------------------------------------------------

FFLAGS =  -O3 -ip -no-prec-div -funroll-loops -xHost -heap-arrays 64 

#-----------------------------------------------------------------------

# optimization

# we have tested whether higher optimisation improves performance

# -axK  SSE1 optimization,  but also generate code executable on all mach.

#       xK improves performance somewhat on XP, and a is required in order

#       to run the code on older Athlons as well

# -xW   SSE2 optimization

# -axW  SSE2 optimization,  but also generate code executable on all mach.

# -tpp6 P3 optimization

# -tpp7 P4 optimization

#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended

OFLAG=

OFLAG_HIGH = $(OFLAG)

OBJ_HIGH =

OBJ_NOOPT =

DEBUG  = -FR -O0

INLINE = $(OFLAG)

#-----------------------------------------------------------------------

# the following lines specify the position of BLAS  and LAPACK

# VASP works fastest with the libgoto library

# so that's what we recommend

#-----------------------------------------------------------------------

# mkl.10.0

# set -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines

BLAS=-L/opt/intel/mkl/lib/intel64 -lmkl_core -lmkl_sequential -lmkl_intel_lp64 

# even faster for VASP Kazushige Goto's BLAS

# http://www.cs.utexas.edu/users/kgoto/signup_first.html

# parallel goto version requires sometimes -libverbs

#BLAS=  /opt/libs/libgoto/libgoto.so

# LAPACK, simplest use vasp.5.lib/lapack_double

LAPACK= ../vasp.5.lib/lapack_double.o

# use the mkl Intel lapack

#LAPACK= -lmkl_lapack

#-----------------------------------------------------------------------

LIB  = -L../vasp.5.lib -ldmy \

     ../vasp.5.lib/linpack_double.o $(LAPACK) \

     $(BLAS)

# options for linking, nothing is required (usually)

LINK    = 

#-----------------------------------------------------------------------

# fft libraries:

# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)

# since this version is faster on P4 machines, we recommend to use it

#-----------------------------------------------------------------------

FFT3D   = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available

#FFT3D   = fftw3d.o fft3dlib.o   /opt/libs/fftw-3.1.2/lib/libfftw3.a

#=======================================================================

# MPI section, uncomment the following lines until

#    general  rules and compile lines

# presently we recommend OPENMPI, since it seems to offer better

# performance than lam or mpich

#

# !!! Please do not send me any queries on how to install MPI, I will

# certainly not answer them !!!!

#=======================================================================

#-----------------------------------------------------------------------

# fortran linker for mpi

#-----------------------------------------------------------------------

FC=mpiifort

FCL=$(FC)

#-----------------------------------------------------------------------

# additional options for CPP in parallel version (see also above):

# NGZhalf               charge density   reduced in Z direction

# wNGZhalf              gamma point only reduced in Z direction

# scaLAPACK             use scaLAPACK (usually slower on 100 Mbit Net)

# avoidalloc          avoid ALLOCATE if possible

# PGF90               work around some for some PGF90 / IFC bugs

# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD

# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)

# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)

# tbdyn                 MD package of Tomas  Bucko

#-----------------------------------------------------------------------

#-----------------------------------------------------------------------

CPP    = $(CPP_) -DMPI  -DHOST=\"LinuxIFC\" -DIFC \

     -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGZhalf \

     -DMPI_BLOCK=8000

#    -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------

# location of SCALAPACK

# if you do not use SCALAPACK simply leave that section commented out

#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/

#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a  \

# $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA=

#-----------------------------------------------------------------------

# libraries for mpi

#-----------------------------------------------------------------------

LIB     = -L../vasp.5.lib -ldmy  \

      ../vasp.5.lib/linpack_double.o $(LAPACK) \

      $(SCA) $(BLAS)

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller

FFT3D   = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o 

# alternatively: fftw.3.1.X is slighly faster and should be used if available

#FFT3D   = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o  /opt/libs/fftw-3.1.2/lib/libfftw3.a

#-----------------------------------------------------------------------

# general rules and compile lines

#-----------------------------------------------------------------------

BASIC=   symmetry.o symlib.o   lattlib.o  random.o   

SOURCE=  base.o     mpi.o      smart_allocate.o      xml.o  \

         constant.o jacobi.o   main_mpi.o  scala.o   \

         asa.o      lattice.o  poscar.o   ini.o  mgrid.o  xclib.o  vdw_nl.o  xclib_grad.o \

         radial.o   pseudo.o   gridq.o     ebs.o  \

         mkpoints.o wave.o     wave_mpi.o  wave_high.o  \

         $(BASIC)   nonl.o     nonlr.o    nonl_high.o dfast.o    choleski2.o \

         mix.o      hamil.o    xcgrad.o   xcspin.o    potex1.o   potex2.o  \

         constrmag.o cl_shift.o relativistic.o LDApU.o \

         paw_base.o metagga.o  egrad.o    pawsym.o   pawfock.o  pawlhf.o   rhfatm.o  paw.o   \

         mkpoints_full.o       charge.o   Lebedev-Laikov.o  stockholder.o dipol.o    pot.o \

         dos.o      elf.o      tet.o      tetweight.o hamil_rot.o \

         steep.o    chain.o    dyna.o     sphpro.o    us.o  core_rel.o \

         aedens.o   wavpre.o   wavpre_noio.o broyden.o \

         dynbr.o    rmm-diis.o reader.o   writer.o   tutor.o xml_writer.o \

         brent.o    stufak.o   fileio.o   opergrid.o stepver.o  \

         chgloc.o   fast_aug.o fock.o     mkpoints_change.o sym_grad.o \

         mymath.o   internals.o dynconstr.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \

         hamil_high.o nmr.o    pead.o     mlwf.o     subrot.o   subrot_scf.o \

         force.o    pwlhf.o  gw_model.o optreal.o   davidson.o  david_inner.o \

         electron.o rot.o  electron_all.o shm.o    pardens.o  paircorrection.o \

         optics.o   constr_cell_relax.o   stm.o    finite_diff.o elpol.o    \

         hamil_lr.o rmm-diis_lr.o  subrot_cluster.o subrot_lr.o \

         lr_helper.o hamil_lrf.o   elinear_response.o ilinear_response.o \

         linear_optics.o linear_response.o   \

         setlocalpp.o  wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \

         ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \

         ump2.o bse_te.o bse.o acfdt.o chi.o sydmat.o dmft.o \

         rmm-diis_mlr.o  linear_response_NMR.o

vasp: $(SOURCE) $(FFT3D) $(INC) main.o

        rm -f vasp

        $(FCL) -o vasp main.o  $(SOURCE)   $(FFT3D) $(LIB) $(LINK)

makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)

        $(FCL) -o makeparam  $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)

zgemmtest: zgemmtest.o base.o random.o $(INC)

        $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)

dgemmtest: dgemmtest.o base.o random.o $(INC)

        $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)

ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)

        $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)

kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)

        $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:

        -rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)

        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c main$(SUFFIX)

xcgrad.o: xcgrad$(SUFFIX)

        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcgrad$(SUFFIX)

xcspin.o: xcspin$(SUFFIX)

        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)

        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F

#

# MIND: I do not have a full dependency list for the include

# and MODULES: here are only the minimal basic dependencies

# if one strucuture is changed then touch_dep must be called

# with the corresponding name of the structure

#

base.o: base.inc base.F

mgrid.o: mgrid.inc mgrid.F

constant.o: constant.inc constant.F

lattice.o: lattice.inc lattice.F

setex.o: setexm.inc setex.F

pseudo.o: pseudo.inc pseudo.F

poscar.o: poscar.inc poscar.F

mkpoints.o: mkpoints.inc mkpoints.F

wave.o: wave.F

nonl.o: nonl.inc nonl.F

nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):

        $(CPP)

        $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)

$(OBJ_NOOPT):

        $(CPP)

        $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F

        $(CPP)

        $(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:

        $(CPP)

        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

.F$(SUFFIX):

        $(CPP)

$(SUFFIX).o:

        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules

#-----------------------------------------------------------------------

# these special rules are cummulative (that is once failed

#   in one compiler version, stays in the list forever)

# -tpp5|6|7 P, PII-PIII, PIV

# -xW use SIMD (does not pay of on PII, since fft3d uses double prec)

# all other options do no affect the code performance since -O1 is used

fft3dlib.o : fft3dlib.F

        $(CPP)

        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

fft3dfurth.o : fft3dfurth.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

fftw3d.o : fftw3d.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave_high.o : wave_high.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

radial.o : radial.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symlib.o : symlib.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symmetry.o : symmetry.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave_mpi.o : wave_mpi.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave.o : wave.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

dynbr.o : dynbr.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

asa.o : asa.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

broyden.o : broyden.F

        $(CPP)

        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

us.o : us.F

        $(CPP)

        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

LDApU.o : LDApU.F

        $(CPP)

        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

5，添加环境变量

在/etc/profile文件末尾添加如下内容，需要重新登录后生效

export PATH=/opt/vasp/vasp5.:$PATH

6，测试

准备测试文件vasp.Hg，进入算例目录，输入:

mpirun -np  vasp

如能正常计算完毕，说明软件安装成功。

补充软件下载地址(仅供测试使用)：

链接: http://pan.baidu.com/s/1qWv4k7i 密码: rsgh

搭建高性能计算环境（四）、应用软件的安装之VASP的更多相关文章

搭建高性能计算环境（五）、应用软件的安装之Amber12
应用软件通常安装在/opt目录下,这样系统中的各个用户都能方便使用,下面的软件都将安装到/opt目录. 1,上传需要的软件包Amber12.tar.gz.AmberTools13.tar.bz2.Am ...
ubuntu通过apt-get方式搭建lnmp环境以及php扩展安装
v 一直是在用的lnmp的集成安装包搭建lnmp环境,因为工作需要需要安装ldap扩展,在网上怎么都找不到源码安装包,只能卸载掉原来的lnmp环境,用ubuntu的php5-ldap扩展, 在安装中遇 ...
Windows10搭建开发环境----MySQL8.0.17安装
Windows10 MySQL8解压版最新最全图文安装配置一.官网下载解压版安装包 MySQL官网 1. 进入官网点击downloads,如图: 2. 翻到网页底部,点击如图位置: 3. 点击MyS ...
搭建高性能计算环境（九）、应用软件的安装之gaussian 09
高斯软件一般使用的都是编译好的二进制版,所以解压缩后设置一下环境变量就可以用了. cd /opt tar xvf g09.tar.gz 设置环境变量,添加到/etc/profile文件中,重新登录后生 ...
搭建高性能计算环境（八）、应用软件的安装之gromacs
1,下载安装新版本的gcc(高版本的gcc只是推荐使用的,系统自带的gcc4.4照样能正常编译.运行) wget http://ftp.tsukuba.wide.ad.jp/software/gcc/ ...
搭建高性能计算环境（六）、应用软件的安装之lammps
1,上传需要的软件包lammps-stable.tar.gz. 2,解压缩并进入安装目录 tar xvf lammps-stable.tar.gz cd lammps-30Oct14 3,如果需要re ...
搭建高性能计算环境（十）、应用软件的安装之Wien2k
1,首先安装fftw .tar.gz cd fftw- ./configure --prefix=/opt/fftw- --enable-shared --enable-float --enable- ...
搭建高性能计算环境（七）、应用软件的安装之MS
1,上传软件包MaterialsStudio70.tgz.msi_7.lic到服务器上. 2,安装ms一般会创建一个普通用户msi,软件安装在msi账号下. 创建用户msi: useradd msi ...
搭建高性能计算环境（一）、Linux操作系统的安装和配置
一般课题组刚开始做计算,往往没有专门的集群,主要用自己的PC机.工作站或者买几台服务器来跑跑:小伙伴们摸索Linux的使用.编译一些开源软件.甚至写点Shell脚本需要耗费很多时间,耽搁了读文献.码论 ...

随机推荐

[Flex] PopUpButton系列 —— 添加按钮图标
<?xml version="1.0" encoding="utf-8"?><!--为主按钮添加默认图标 PopUpButtonIcon.mx ...
Ecshop 安装时错误
网上提示方法将install/includes/lib_installer.php以下内容修改后仍然提示失败: include(ROOT_PATH . 'install/languages/' . $ ...
iframe 跨域自适应纯css解决方法
<style type="text/css">body{background:#f00;}body, html,#ifm1{width:100%;height:100% ...
@valid表单验证demo
springMVC 表单验证demo 视图层使用的是jsp
安装LINUX X86-64的10201出现链接ins_ctx.mk错误
在安装linux X86-64的Oracle10201时,在链接过程中出现了这个错误. 详细错误信息为: Error in invoking target ‘install’ of makefile ...
OC基础(19)
类扩展(Class Extension) Block基本概念 typedef和Block Block注意事项 *:first-child { margin-top: 0 !important; } b ...
POJ 1088 滑雪记忆化DP
滑雪 Time Limit: 1000MS Memory Limit: 65536K Description Michael喜欢滑雪百这并不奇怪, 因为滑雪的确很刺激.可是为了获得速度 ...
Orchard官方文档翻译(一) 总览
原文地址:http://docs.orchardproject.net/ 最近想要学习了解orchard,但却没有找到相关的中文文档,只有英文文档.于是决定自行翻译,以便日后方便翻阅. 转载请注明原作 ...
【教程】【FLEX】#002 请求服务端数据（UrlLoader）
为什么Flex需要请求服务端读取数据,而不是自己读取? Flex 是一门界面语言,主要是做界面展示的,它能实现很多绚丽的效果,这个是传统Web项目部能比的. 但是它对数据库和文件的读写没有良好的支持 ...
mysql中字符集和校对规则
首先,明确一下字符集和校对规则的概念: 字符集(charset):是一套符号和编码校对规则(collation):是在字符集内用于比较字符的一套规则,比如有的规则区分大小写,有的则无视 ...

搭建高性能计算环境（四）、应用软件的安装之VASP

搭建高性能计算环境（四）、应用软件的安装之VASP的更多相关文章

随机推荐

热门专题