NetScaler Logs Collection Guide

来源  https://support.citrix.com/article/CTX227560

Article | AuthenticationConfigurationInteroperabilityNetworkingPerformanceHardware | 6 found this helpful | Created: 09 Sep 2017 | Modified: 14 Sep 2017

Applicable Products

  • NetScaler Gateway
  • NetScaler

Information

This article illustrates the log collection process on NetScaler MPX/VPX/SDX with common scenario.

Contents

    1. Basic Information Collection
    2. Information Collection for Typical Scenario
      1. NetScaler crash
      2. NetScaler hang
      3. NetScaler Hardware Error(MPX/SDX)
      4. NetScaler Gateway (ICA proxy)
      5. NetScaler Gateway (SSLVPN)
    3. Information Collection Procedure
      1. NetScaler Serial Number
      2. NetScaler Version/HA
      3. NetScaler MPX/VDX show techsupport
      4. NetScaler ns.conf
      5. NetScaler SDX
      6. NetScaler Insight Center
      7. NetScaler Command Center
      8. NetScaler Nstrace
      9. iOS/Android/Windows receiver Log Collection
      10. TAAS/CIS
    4. Appendix
      1. Remote Helpdesk Tool Download Link
      2. Remote Troubleshooting Tool Download Link
      3. 1. Basic Information Collection
         
        1. For NetScaler MPX/SDX, confirm serial number, for NetScaler VPX, confirm the ORG ID.
        2. NetScaler detail version, such as NS 10.5 build 60.7.
        3. NetScaler deployment, standalone or HA.
        4. Network topology with IP address, interface as detail as possible. (Note: if there is nstrace for information collection, provide the IP address as supplementary information.)
        5. Is there change on NetScaler and environment before the issue takes place?
        6. When does the issue happen first? (Attach the screenshot/video of error message if possible.)
        7. Does the issue happen consistently? Is it reproducible? If yes, provide detailed steps to reproduce the issue.
        2. Information Collection for Typical Scenario
          2.1 NetScaler crash
             -  NetScaler show techsupport.
             -  NetScaler kernel crashdump/NSPPE crashdump
           Note: Check whether there are dumps in /var/core or /var/crash folder
           

          2.2 NetScaler stops
          -  If NetScaler is not manually rebooted, press NMI button to generate dump file and collection the dump as in 2.1. Refer the following KB article for NMI button:
             http://support.citrix.com/article/CTX120660
          -  If NetScaler is already rebooted, collect show techsupport as in 3.3. (Point out the timestamp of hang)
          2.3 NetScaler Hardware Error(MPX/SDX)
          1) NetScaler Fail to Boot:
          -  Check whether there is display on LCD, take a picture of the LCD.
          -  Connect NetScaler with console cable, check whether there is any output and save it as txt. Follow the steps when the cable connects:
              
           
              
         
               

        Refer the following docs for cable connections:
        http://docs.citrix.com/en-us/netscaler/11/getting-started-with-netscaler/install-hardware/connect-cables.html

          2) NetScaler Power Supply:
          -  Check whether NetScaler power supply red light is on, take a picture.
          -  NetScaler show techsupport
          3) NetScaler Hard Disk:
          -  NetScaler show techsupport
          -  Run the following script:
             
          4) NetScaler LCD:
          -  Take a picture of LCD
         

        2.4 NetScaler Gateway (ICA proxy)
        1) NetScaler Gateway Authentication Fail

        Information Collection:
        -  NetScaler show techsupport
        -  NetScaler Gateway aaad.debug. Run the following command and save the output:

        More information:
        http://support.citrix.com/article/CTX114999

         

        2) NetScaler Gateway Cannot Enumerate Application List, Error ”Cannot complete request.” or Redirecting to Blank Page:

        Information Collection:

        • Test to login directly via StoreFront, if there is any issue, resort to StoreFront Team.
        • NetScaler show techsupport
        • NetScaler Gateway private key/session key
        • Capture on client, NetScaler, and Storefront, reproduce the issue, and stop the capture.
        • StoreFront event viewer logsPoint out the following information
        • Timestamp of reproduction
        • Client IP,NetScaler Gateway VIP,Storefront IP
        • Error message screenshot

        More information:
        https://support.citrix.com/article/CTX207162
        https://support.citrix.com/article/CTX214214

         

        3) App/Desktop cannot open via NetScaler Gateway, error 1110, 1030 etc.
        Information Collection:
        -  Test to open directly via StoreFront, if there is any issue, resort to XenApp/XenDesktop Team.
        -  NetScaler show techsupport.
        -  Change the default program of ica to notepad, save launch.ica

        Or save Launch.ica to client referring the following KB:
        http://support.citrix.com/article/CTX134993
        - Capture on client, NetScaler, and Storefront, reproduce the issue, and stop the capture.
        - Point out the following information

        • Timestamp of reproduction
        • Client IP,NetScaler Gateway VIP, Storefront IP, VDA IP
        • Error message screenshot
          4) NetScaler Gateway EPA Failure
        Information Collection:
        - Collect EPA log:
            http://netscalerassasin.blogspot.com/2015/06/epa-opswat-packet-flow-and.html
          2.4 NetScaler Gateway (SSLVPN)
        -  NetScaler show techsupport.
        -  NetScaler Gateway private key/session key.
        -  NetScaler network topology
        -  For client issue, collect client log:
            https://www.smali.net/enable-netscaler-plugin-client-logging-ssl-vpn/
        3. Information Collection Procedure
          3.1 NetScaler Serial Number
         

        1) Web GUI
        Access http://NSIP, check Serial no in Harware information, it’s 10 bits strings with number and alphabet.

        2) CLI
        SSH to NetScaler with putty, execute “show hardware”:

        3) Stamp on NetScaler backplane

          3.2 NetScaler Version/HA
         

        1) Web GUI
        Access http://NSIP, check version and node HA status

        2) CLI
        SSH to NetScaler with putty, execute ”show version”

        execute ”show ha node” 

          3.3 NetScaler MPX/VPX show techsupport
         

        1) Web GUI

         
        2) CLI

        More information:
        http://support.citrix.com/article/CTX127900

          3.4 NetScaler ns.conf
         

        1) WebGUI
         

        2) WinSCP
        Save config first:

        Get ns.conf with WinSCP:

          3.5 NetScaler SDX
         

        1) For VPX on SDX show techsupport, refer 3.3
        2) For SVM and XS bundle:

        Choose Management Service and XenServer:

        3) CLI

        Logs locate at /var/mps/tech_support.
        More information:
        http://docs.citrix.com/en-us/sdx/11/sdx-command-reference/system/techsupport.html

          3.6 NetScaler Insight Center
         

        1)  NetScaler show techsupport
        2)  NetScaler Insight Center support bundle

          3.7 NetScaler Command Center
         

        1)  NetScaler show techsupport
        2)  NetScaler Command Center support bundle

          3.8 NetScaler Nstrace
         

        1)  WebGUI


        Note: Set Packet Size to 0, and add expression filer if necessary, click ok.

        2)  CLI
        Start nstrace:

        Stop nstrace:

        If filtering the IP address of 192.168.1.1:

        Nstrace locates at /var/nstrace/<timestamp>, download via WebGUI or with WinSCP

          3.9 iOS/Android/Windows/Mac receiver Log Collection
          1)  iOS Receiver
        http://support.citrix.com/article/CTX136380
        2)  Android Receiver
        http://support.citrix.com/article/CTX137973
        3)  Windows Receiver
        http://support.citrix.com/article/CTX132883
        http://support.citrix.com/article/CTX136927
        http://support.citrix.com/article/CTX141067
        4)  Mac Receiver
        http://support.citrix.com/article/CTX138727
         
        More information:
        http://support.citrix.com/article/CTX200282
          3.10 TAAS/CIS
         

        Upload the logs and trace to http://cis.citrix.com:
        -  Login with Citrix account:

        -  Click Diagnosis

        -  Upload data

        -  Input case number and upload file

        4. Appendix
          4.1 Remote Helpdesk Tool Download Link
          1)  AnyDesk
        http://anydesk.com/download
        2)  Teamviewer
        http://www.teamviewer.com/zhcn/download/windows/
        3)  GoToMeeting
        http://support.citrixonline.com/en_US/Meeting/help_files/G2M010002
          4.2  Remote Troubleshooting Tool Download Link
          1)  Putty
        http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
        2)  WinSCP
        https://winscp.net/eng/download.php
        3)  WireShark
        https://www.wireshark.org/download.html

=============================== End

NetScaler Logs Collection Guide的更多相关文章

  1. Citrix ADC 12.1 / NetScaler 12

    Citrix ADC 12.1 / NetScaler 12 参考 https://www.carlstalhood.com/netscaler-menu/netscaler-12/ Core – C ...

  2. k8s中yaml文常见语法

    在k8s中,所有的配置都是 json格式的.但为了读写方便,通常将这些配置写成yaml 格式,其运行的时候,还是会靠yaml引擎将其转化为json,apiserver 也仅接受json的数据类型. y ...

  3. ./upload/forum.php

    这是forum.php的全部代码,然后试着读一读,自己做做笔记. define('APPTYPEID', 2); define('CURSCRIPT', 'forum'); define(); 定义常 ...

  4. 对discuz的代码分析学习(四)论坛入口文件

    只是大致分析下执行流程,主要就是取得mod参数的值,根据取值加载控制器,控制器位置在最后一行指定了. 1 )定义应用名称,加载两个必要文件 define('APPTYPEID', 2); define ...

  5. Kubernetes之Controllers三

    StatefulSets StatefulSet is the workload API object used to manage stateful applications. Note: Stat ...

  6. python找寻合适的日志库logging Handler——Handler自定义实现

    最近在用python tornado开发一个app的服务端.投产的系统肯定需要包含日志功能,这里就自然想到了用python自带的logging库.   logging中日志内容的输出都交由Handle ...

  7. MPSVPX 配置

    MPSVPX 配置 设置主机名,IP地址,掩码,网关,DNS服务器,时区(使用WebGUI界面设置). bash-2.05b# cat svm.conf arp -d -a route flush i ...

  8. python logging 重定向print(标准输入输出)

    重定向print输出到Mongo celery 本身用到logging.info 会输出 是celery的问题,还是logging初始化的时候就会有输出? 好像是celery 配合logging的问题 ...

  9. Collection View Programming Guide for iOS---(七)---Custom Layouts: A Worked Example

    Custom Layouts: A Worked Example Creating a custom collection view layout is simple with straightfor ...

随机推荐

  1. 记录一次vxworks下使用NFS组件的过程

    问题:有三块CPU都运行vxworks6.9,现在想要CPU3做server,CPU1-2通过NFS访问CPU3上的文件 补充:使用防火墙可能会影响NFS访问,目前我还没有找到解决办法... 下面是过 ...

  2. Response.setContentType()参数说明

    response.setContentType()的参数说明 <meta http-equiv="Content-Type" content="text/html; ...

  3. WordPress自定义菜单和修改去除多余的css

    这里主要是用于模板制作的,一般前端已经写好了,我们只要将前端的内容套用WordPress后台就可以了. 所以我们在模板制作过程中,需要自定义WordPress菜单. 在functions.php文件中 ...

  4. VICA概述及架构设计

    VICA全称VAT Invoice Client Platform(增值税发票客户端平台),顾名思义就是公司增值税发票业务相关处理的客户端集成平台.在VICA出现之前,公司发票开具的技术主要是依赖于A ...

  5. 实例节点的NTP服务器地址配置正确,而且能够ping通, 但是在chronyc sources指令中显示NTP服务器状态为“?”

    问题:如果实例节点的NTP服务器地址配置正确,而且能够ping通,   但是在chronyc sources指令中显示NTP服务器状态为“?”, 该如何检查并操作. 1)在chrony配置文件中,检查 ...

  6. 【极简版】OpenGL 超级宝典(第五版)环境配置 VS2010

    事先声明:该教程仅适用于VS2010环境下超级宝典第五版的配置 第一步:下载示例代码和环境包: 链接:https://pan.baidu.com/s/1llRRQ8ymBgMGuXp5M50pJw 提 ...

  7. whereis which type find

    1. whereis  name whereis命令只能用于搜索程序名,而且只搜索二进制文件(参数-b).man说明文件(参数-m)和源代码文件(参数-s).如果省略参数,则返回所有信息. 2. wh ...

  8. Docker一

    Docker 简介一 背景开发和运维之间因为环境不同而导致的矛盾集群环境下每台机器部署相同的应用DevOps(Development and Operations) 简介 Docker是一个开源的应用 ...

  9. Windows10系统Python2.7通过Swig调用C++过程

    我用的 python版本是2.7.12: Python 2.7.12 (v2.7.12:d33e0cf91556, Jun 27 2016, 15:24:40) [MSC v.1500 64 bit ...

  10. 字符编码笔记:ASCII,Unicode 和 UTF-8(理解)

    1.ASCII 码 美国制定的字符编码规则,对英语字符与二进制位之间的关系做了统一规定. 占一个字节,8 位,最多可表示 2^8 = 256 种状态(字符) 实际共有 128 个字符,只占用一个字节的 ...