.rdp 文件参数详解
Overview of .rdp file settings
Setting | Type | Default value | Description and possible values | Settable from RDC GUI? | RDP+ equivalent | 5.1 | 5.2 | 6.0 | 6.1 | 7.0 | 7.1 | 8.0 | 8.1 |
administrative session | i | 0 | Connect to the administrative session of the remote computer.
0 - Do not use the administrative session. |
Command line | /console, /admin | X | X | X | X | X | |||
allow desktop composition | i | 0 | Determines whether desktop composition (needed for Aero) is permitted when you log on to the remote computer.
0 - Disable desktop composition in the remote session. |
Yes | X | X | X | X | X | X | X | ||
allow font smoothing | i | 0 | Determines whether font smoothing may be used in the remote session.
0 - Disable font smoothing in the remote session. |
Yes | X | X | X | X | X | X | X | ||
alternate full address | s | Specifies an alternate name or IP address of the remote computer that you want to connect to.
Will be overruled by RDP+. |
No | X | X | X | X | ||||||
alternate shell | s | Specifies a program to be started automatically when you connect to a remote computer. The value should be a valid path to an executable file. This setting only works when connecting to servers. |
Yes | /start | X | X | X | X | X | X | X | X | |
audiocapturemode | i | 0 | Determines how sounds captured (recorded) on the local computer are handled when you are connected to the remote computer.
0 - Do not capture audio from the local computer. |
Yes | X | X | X | X | |||||
audiomode | i | 0 | Determines how sounds on a remote computer are handled when you are connected to the remote computer.
0 - Play sounds on the local computer. |
Yes | /[no]sound | X | X | X | X | X | X | X | X |
audioqualitymode | i | 0 | Determines the quality of the audio played in the remote session.
0 - Dynamically adjust audio quality based on available bandwidth. |
No | X | X | X | X | |||||
authentication level | i | 2 | Determines what should happen when server authentication fails.
0 - If server authentication fails, connect without giving a warning. This setting will be overruled by RDP+. |
Yes | X | X | X | X | X | X | X | ||
autoreconnect max retries | i | 20 | Determines the maximum number of times the client computer will try to reconnect to the remote computer if the connection is dropped. Note: The maximum value Remote Desktop can handle is 200. |
No | X | X | X | X | X | X | X | X | |
autoreconnection enabled | i | 1 | Determines whether the client computer will automatically try to reconnect to the remote computer if the connection is dropped.
0 - Do not attempt to reconnect. |
Yes | X | X | X | X | X | X | X | X | |
bitmapcachepersistenable | i | 1 | Determines whether bitmaps are cached on the local computer (disk-based cache). Bitmap caching can improve the performance of your remote session.
0 - Do not cache bitmaps. |
Yes | X | X | X | X | X | X | X | ||
bitmapcachesize | i | 1500 | Specifies the size in kilobytes of the memory-based bitmap cache. The maximum value is 32000. | No | X | X | X | X | X | X | X | X | |
compression | i | 1 | Determines whether the connection should use bulk compression.
0 - Do not use bulk compression. |
No | X | X | X | X | X | X | X | X | |
connect to console | i | 0 | Connect to the console session of the remote computer.
0 - Connect to a normal session. |
Command line | /console, /admin | X | X | X | |||||
connection type | i | 2 | Specifies pre-defined performance settings for the Remote Desktop session.
1 - Modem (56 Kbps). By itself, this setting does nothing. When selected in the RDC GUI, this option changes several performance related settings (themes, animation, font smoothing, etcetera). These separate settings always overrule the connection type setting. |
Yes | X | X | X | X | |||||
desktopheight | i | 600 | The height (in pixels) of the remote session desktop. | Limited | /h | X | X | X | X | X | X | X | X |
desktop size id | i | 0 | Specifies pre-defined dimensions of the remote session desktop.
0 - 640x480. This setting is ignored when either /w and /h, or desktopwidth and desktopheight are already specified. |
Yes | X | X | X | X | X | X | X | X | |
desktopwidth | i | 800 | The width (in pixels) of the remote session desktop. | Limited | /w | X | X | X | X | X | X | X | X |
devicestoredirect | s | Determines which supported Plug and Play devices on the client computer will be redirected and available in the remote session.
No value specified - Do not redirect any supported Plug and Play devices. |
Yes | /[no]drives | X | X | X | X | X | X | |||
disable ctrl+alt+del | i | 1 | Determines whether you have to press CTRL+ALT+DELETE before entering credentials after you are connected to the remote computer.
0 - CTRL+ALT+DELETE is required before logging in. Note: When disabled, this setting will also delay the autologin until the user has pressed CTRL+ALT+DELETE. |
No | X | X | X | X | X | X | X | X | |
disable full window drag | i | 1 | Determines whether window content is displayed when you drag the window to a new location.
0 - Show the contents of the window while dragging. |
Yes | X | X | X | X | X | X | X | X | |
disable menu anims | i | 1 | Determines whether menus and windows can be displayed with animation effects in the remote session.
0 - Menu and window animation is permitted. |
Yes | X | X | X | X | X | X | X | X | |
disable themes | i | 0 | Determines whether themes are permitted when you log on to the remote computer.
0 - Themes are permitted. |
Yes | X | X | X | X | X | X | X | X | |
disable wallpaper | i | 1 | Determines whether the desktop background is displayed in the remote session.
0 - Display the wallpaper. |
Yes | /[no]wallpaper | X | X | X | X | X | X | X | X |
disableconnectionsharing | i | 0 | Determines whether a new Terminal Server session is started with every launch of a RemoteApp to the same computer and with the same credentials.
0 - No new session is started. The currently active session of the user is shared. |
No | X | X | X | X | X | X | |||
disableremoteappcapscheck | i | 0 | Specifies whether the Remote Desktop client should check the remote computer for RemoteApp capabilities. 0 - Check the remote computer for RemoteApp capabilities before logging in. 1 - Do not check the remote computer for RemoteApp capabilities. Note: This setting must be set to 1 when connecting to Windows XP SP3, Vista or 7 computers with RemoteApps configured on them. This is the default behavior of RDP+. |
No | X | X | X | X | |||||
displayconnectionbar | i | 1 | Determines whether the connection bar appears when you are in full screen mode.
0 - Do not show the connection bar. Will be overruled by RDP+ when using the parameter /noclose. |
Yes | X | X | X | X | X | X | X | X | |
domain | s | Specifies the name of the domain of the user.
Will be ignored/overruled by RDP+. |
Yes | /u, /domain | X | X | X | X | X | X | X | X | |
drivestoredirect | s | Determines which local disk drives on the client computer will be redirected and available in the remote session.
No value specified - Do not redirect any drives. |
Yes | /[no]drives | X | X | X | X | X | X | |||
enablecredsspsupport | i | 1 | Determines whether Remote Desktop will use CredSSP for authentication if it’s available.
0 - Do not use CredSSP, even if the operating system supports it. |
No | X | X | X | X | X | X | |||
enablesuperpan | i | 0 | Determines whether SuperPan is enabled or disabled. SuperPan allows the user to navigate a remote desktop in full-screen mode without scroll bars, when the dimensions of the remote desktop are larger than the dimensions of the current client window. The user can point to the window border, and the desktop view will scroll automatically in that direction.
0 - Do not use SuperPan. The remote session window is sized to the client window size. |
No | X | X | X | X | |||||
full address | s | Specifies the name or IP address (and optional port) of the remote computer that you want to connect to.
Will be ignored by RDP+. |
Yes | /v | X | X | X | X | X | X | X | X | |
gatewaycredentialssource | i | 4 | Specifies the credentials that should be used to validate the connection with the RD Gateway.
0 - Ask for password (NTLM). |
Yes | X | X | X | X | X | X | |||
gatewayhostname | s | Specifies the hostname of the RD Gateway. | Yes | X | X | X | X | X | X | ||||
gatewayprofileusagemethod | i | 0 | Determines the RD Gateway authentication method to be used.
0 - Use the default profile mode, as specified by the administrator. |
Yes | X | X | X | X | X | X | |||
gatewayusagemethod | i | 4 | Specifies if and how to use a Remote Desktop Gateway (RD Gateway) server.
0 - Do not use an RD Gateway server. 0 and 4 have the same effect, but setting the method to 4 also sets the option for bypassing local addresses in the Remote Desktop user interface. |
Yes | X | X | X | X | X | X | |||
keyboardhook | i | 2 | Determines how Windows key combinations are applied when you are connected to a remote computer.
0 - Windows key combinations are applied on the local computer. |
Yes | X | X | X | X | X | X | X | X | |
negotiate security layer | i | 1 | Determines whether the level of security is negotiated or not.
0 - Security layer negotiation is not enabled and the session is started by using Secure Sockets Layer (SSL). |
No | X | X | X | X | X | X | |||
password 51 | b | The user password in a binary hash value. Will be overruled by RDP+. | Yes | /p, /pe, /i | X | X | X | X | X | X | X | X | |
pinconnectionbar | i | 1 | Determines whether or not the connection bar should be pinned to the top of the remote session upon connection when in full screen mode. 0 - The connection bar should not be pinned to the top of the remote session. 1 - The connection bar should be pinned to the top of the remote session. |
No | X | X | X | X | X | X | X | X | |
prompt for credentials | i | 0 | Determines whether Remote Desktop Connection will prompt for credentials when connecting to a remote computer for which the credentials have been previously saved.
0 - Remote Desktop will use the saved credentials and will not prompt for credentials. This setting is ignored by RDP+. |
Yes | X | X | X | X | X | X | |||
prompt for credentials on client | i | 0 | Determines whether Remote Desktop Connection will prompt for credentials when connecting to a server that does not support server authentication.
0 - Remote Desktop will not prompt for credentials. This setting is ignored by RDP+. |
No | X | X | X | X | X | ||||
promptcredentialonce | i | 1 | When connecting through an RD Gateway, determines whether RDC should use the same credentials for both the RD Gateway and the remote computer.
0 - Remote Desktop will not use the same credentials . |
Yes | X | X | X | X | X | ||||
public mode | i | 0 | Determines whether Remote Desktop Connection will be started in public mode.
0 - Remote Desktop will not start in public mode . This setting is incompatible with autologin and some other features and therefore ignored by RDP+. |
Command line | X | X | X | X | |||||
redirectclipboard | i | 1 | Determines whether the clipboard on the client computer will be redirected and available in the remote session and vice versa.
0 - Do not redirect the clipboard. |
Yes | X | X | X | X | X | X | |||
redirectcomports | i | 0 | Determines whether the COM (serial) ports on the client computer will be redirected and available in the remote session.
0 - The COM ports on the local computer are not available in the remote session. |
Yes | X | X | X | X | X | X | X | X | |
redirectdirectx | i | 1 | Determines whether DirectX will be enabled for the remote session.
0 - Do not enable DirectX rendering. |
No | X | X | X | X | |||||
redirectdrives | i | 0 | Determines whether local disk drives on the client computer will be redirected and available in the remote session.
0 - The drives on the local computer are not available in the remote session. Note: This setting is replaced by drivestoredirect from RDC 6.0 onward. |
Yes | /[no]drives | X | X | ||||||
redirectposdevices | i | 0 | Determines whether Microsoft Point of Service (POS) for .NET devices connected to the client computer will be redirected and available in the remote session.
0 - The POS devices from the local computer are not available in the remote session. |
No | X | X | X | X | X | X | |||
redirectprinters | i | 1 | Determines whether printers configured on the client computer will be redirected and available in the remote session.
0 - The printers on the local computer are not available in the remote session. |
Yes | /[no]printers | X | X | X | X | X | X | X | X |
redirectsmartcards | i | 1 | Determines whether smart card devices on the client computer will be redirected and available in the remote session.
0 - The smart card device on the local computer is not available in the remote session. |
Yes | X | X | X | X | X | X | X | X | |
remoteapplicationcmdline | s | Optional command line parameters for the RemoteApp. | No | X | X | X | X | X | X | ||||
remoteapplicationfile | s | Specifies a file to be opened on the remote computer by the RemoteApp.
Note: For local files to be opened, you must also enable drive redirection for (at least) the source drive. |
No | /remotefile | X | X | X | X | X | X | |||
remoteapplicationexpandcmdline | i | 1 | Determines whether environment variables contained in the RemoteApp command line parameter should be expanded locally or remotely.
0 - Environment variables should be expanded to the values of the local computer. |
No | X | X | X | X | X | X | |||
remoteapplicationexpandworkingdir | i | 0 | Determines whether environment variables contained in the RemoteApp working directory parameter should be expanded locally or remotely.
0 - Environment variables should be expanded to the values of the local computer. Note: The RemoteApp working directory is specified through the shell working directory parameter. |
No | X | X | X | X | X | X | |||
remoteapplicationicon | s | Specifies the file name of an icon file to be displayed in the Remote Desktop interface while starting the RemoteApp. By default RDC will show the standard Remote Desktop icon.
Note: Only .ico files are supported. |
No | X | X | X | X | X | X | ||||
remoteapplicationmode | i | 0 | Determines whether a RemoteApp shoud be launched when connecting to the remote computer.
0 - Use a normal session and do not start a RemoteApp. |
No | /remoteapp | X | X | X | X | X | X | ||
remoteapplicationname | s | Specifies the name of the RemoteApp in the Remote Desktop interface while starting the RemoteApp. | No | X | X | X | X | X | X | ||||
remoteapplicationprogram | s | Specifies the alias or executable name of the RemoteApp. | No | /remoteapp | X | X | X | X | X | ||||
screen mode id | i | 2 | Determines whether the remote session window appears full screen when you connect to the remote computer.
1 - The remote session will appear in a window. |
Yes | /f[ullscreen], /fit, /max, /w, /h |
X | X | X | X | X | X | X | X |
server port | i | 3389 | Defines an alternate default port for the Remote Desktop connection.
Will be overruled by any port number appended to the server name. |
Command line | /v | X | X | X | X | X | X | X | X |
session bpp | i | 32 | Determines the color depth (in bits) on the remote computer when you connect.
8 - 256 colors (8 bit). |
Yes | X | X | X | X | X | X | X | X | |
shell working directory | s | The working directory on the remote computer to be used if an alternate shell is specified. | Yes | X | X | X | X | X | X | X | X | ||
smart sizing | i | 0 | Determines whether the client computer should scale the content on the remote computer to fit the window size of the client computer when the window is resized.
0 - The client window display will not be scaled when resized. |
No | X | X | X | X | X | X | X | X | |
span monitors | i | 0 | Determines whether the remote session window will be spanned across multiple monitors when you connect to the remote computer.
0 - Monitor spanning is not enabled. Note: When using Remote Desktop Connection 7 (Windows 7/2008), the use multimon setting is recommended. |
Yes | /span | X | X | X | X | X | X | ||
superpanaccelerationfactor | i | 1 | Specifies the number of pixels that the screen view scrolls in a given direction for every pixel of mouse movement by the client when in SuperPan mode | No | X | X | X | X | |||||
usbdevicestoredirect | s | Determines which supported RemoteFX USB devices on the client computer will be redirected and available in the remote session when you connect to a remote session that supports RemoteFX USB redirection.
No value specified - Do not redirect any supported RemoteFX USB devices. |
Yes | X | X | X | |||||||
use multimon | i | 0 | Determines whether the session should use true multiple monitor support when connecting to the remote computer.
0 - Do not enable multiple monitor support. |
Yes | /multimon | X | X | X | X | ||||
username | s | Specifies the name of the user account that will be used to log on to the remote computer.
Will be ignored by RDP+. |
Yes | /u | X | X | X | X | X | X | X | X | |
videoplaybackmode | i | 1 | Determines whether RDC will use RDP efficient multimedia streaming for video playback.
0 - Do not use RDP efficient multimedia streaming for video playback. |
No | X | X | X | X | |||||
winposstr | s | 0,3,0,0,800,600 | Specifies the position and dimensions of the session window on the client computer.
Will be overruled by RDP+. |
No | /f[ullscreen], /fit, /max, /w, /h, /pos |
X | X | X | X | X | X | X | X |
Overview of RDC versions
5.1 : Included with Windows XP.
5.2 : Included with Windows 2003.
6.0 : Included with Windows Vista. Available for Windows XP SP2 and Windows 2003 SP1/SP2.
6.1 : Included with Windows 2008, Windows Vista SP1 and Windows XP SP3. Available for Windows XP SP2.
7.0 : Included with Windows 2008 R2 and Windows 7. Available for Windows XP SP3 and Windows Vista SP1/SP2.
7.1 : Included with Windows 7 SP1 and Windows 2008 R2 SP1.
8.0 : Included with Windows 8 and Windows 2012. Available for Windows 7 SP1 and Windows 2008 R2 SP1.
8.1 : Included with Windows 8.1 and Windows 2012 R2. Available for Windows 7 SP1 and Windows 2008 R2 SP1.
.rdp 文件参数详解的更多相关文章
- Linux ifconfig-etho文件参数详解
1.ifcfg-eth0文件参数详解 DEVICE 网卡名称/网络接口的名称BOOTPROTO 系统启动地址协议 常用参数: none:不使用启动地址协议,none禁止DHCP bootp:BOOTP ...
- Dockerfile文件参数详解
参考: https://www.jianshu.com/p/e4b31ca37043 https://blog.csdn.net/u010246789/article/details/54139168 ...
- grub.conf文件参数详解
Grub是Linux的下系统启动器之一(另一个名为Lilo),grub.conf相当于 windows下的boot.ini,都是存放启动项设置和信息的,如果你熟悉boot.ini的设置的话相信也可以很 ...
- header头 下载文件 参数详解
header( header( header( header( header( header( header( header( header( //2 浏览器不会响应缓存 //1 Public指示响应 ...
- windows下命令行终端使用rz上传文件参数详解
rz命令: (X) = option applies to XMODEM only (Y) = option applies to YMODEM only (Z) = option applies t ...
- [转帖]XCopy复制文件夹命令及参数详解以及xcopy拷贝目录并排除特定文件
XCopy复制文件夹命令及参数详解以及xcopy拷贝目录并排除特定文件 https://www.cnblogs.com/smartsmile/p/7665979.html xcopy dirA dir ...
- Nginx主配置参数详解,Nginx配置网站
1.Niginx主配置文件参数详解 a.上面博客说了在Linux中安装nginx.博文地址为:http://www.cnblogs.com/hanyinglong/p/5102141.html b.当 ...
- chattr的常用参数详解
chattr的常用参数详解 作者:尹正杰 版权声明:原创作品,谢绝转载!否则将追究法律责任. 在实际生产环境中,有的运维工程师不得不和开发和测试打交道,在我们公司最常见的就是部署接口.每天每个人部署的 ...
- mha配置参数详解
mha配置参数详解: 参数名字 是否必须 参数作用域 默认值 示例 hostname Yes Local Only - hostname=mysql_server1, hostname=192.168 ...
随机推荐
- Linux下搭建Oracle11g RAC(4)----配置oracle,grid用户SSH对等性
虽然在安装软件的过程中,oracle会自动配置SSH对等性,建议在安装软件之前手工配置. 配置oracle用户对等性: node1: [root@node1 ~]# su - oracle node1 ...
- JDK自带方法实现RSA数字签名
JDK 6只支持MD2withRSA, MD5withRSA, SHA1withRSA 其他的如SHA512withRSA需要第三方包支持,如BC(bouncy castle) --20151126 ...
- JAVA SE 框架之俄罗斯方块的效果
Mygame package com.sun.c; import java.awt.event.KeyListener; import com.sun.v.MyJpanel; import com.s ...
- 一款jquery小插件:实现轻松获取和绑定编辑表单的值(带源码)
实现目的:通常在项目中,编辑页面在前后台需要一个一个框赋值,取值操作,小伙伴们普遍都会感觉繁琐,麻烦.: 实现思路:利用json对象化键值的思想: 好处:方便快速开发,提高开发效率,减少重复性代码: ...
- 深入理解shared pool共享池之library cache的library cache lock系列四
本文了解下等待事件library cache lock,进一步理解library cache,之前的文章请见: 深入理解shared pool共享池之library cache的library ca ...
- iOS 地图坐标系之间的转换WGS-84世界标准坐标、GCJ-02中国国测局(火星坐标,高德地图)、BD-09百度坐标系转换
开发过程中遇到地图定位不准确,存在偏差.首先确认你获取到的坐标所在坐标系跟地图数据是不是相匹配的. 常用的地图SDK:高德地图使用的是GCJ-02(也就是火星坐标系),百度使用的是BD-09百度坐标系 ...
- cocos2dx入门分析 hello world
打开新建的"findmistress"项目,可以看到项目文件是由多个代码文件及文件夹组成的,其中 Hello World 的代码文件直接存放于该项目文件夹中.下面我们来详细介绍一下 ...
- 滑动开关效果 css3滑动开关】纯CSS3代码实现滑动开关效果-css3滑动效果-css3左右滑动
今天看到一篇有关 css3事件的博文,一时兴起便整理下相关的资料. 点击按钮,可以实现开关的滑动效果. 今天看到一篇有关 css3事件的博文,一时兴起便整理下相关的资料. 点击按钮,可以实现开关的滑动 ...
- line-height行高使用技巧
若父元素标签高度一定,假设为150px,子元素需要垂直居中,再重新给子元素设置一个行高就好了,省事省力
- node.Js学习-- 创建服务器简要步骤
1.创建项目目录 mkdir ningha(文件夹名)npm init 初始化项目 获得package.json 2..在node.Js命令行操作进入到文件所在目录 3.输入browser-sync ...