1 综述

Separating touching objects in an image is one of the more difficult image processing operations. The watershed transform is often applied to this problem. The watershed transform finds "catchment basins"(集水盆) and "watershed ridge lines"(山脊线) in an image by treating it as a surface where light pixels are high and dark pixels are low.

如果图像中的目标物体是连接在一起的,则分割起来会更困难,分水岭分割算法经常用于处理这类问题,通常会取得比较好的效果。分水岭分割算法把图像看成一幅“地形图”,其中亮度比较强的区域像素值较大,而比较暗的区域像素值较小,通过寻找“汇水盆地”和“分水岭界限”,对图像进行分割。

Segmentation using the watershed transform works better if you can identify, or "mark," foreground objects and background locations. Marker-controlled watershed segmentation follows this basic procedure:

直接应用分水岭分割算法的效果往往并不好,如果在图像中对前景对象和背景对象进行标注区别,再应用分水岭算法会取得较好的分割效果。基于标记控制的分水岭分割方法有以下基本步骤:

1. Compute a segmentation function. This is an image whose dark regions are the objects you are trying to segment.

1.计算分割函数。图像中较暗的区域是要分割的对象。

2. Compute foreground markers. These are connected blobs of pixels within each of the objects.

2.计算前景标志。这些是每个对象内部连接的斑点像素。

3. Compute background markers. These are pixels that are not part of any object.

3.计算背景标志。这些是不属于任何对象的像素。

4. Modify the segmentation function so that it only has minima at the foreground and background marker locations.

4.修改分割函数,使其仅在前景和后景标记位置有极小值。

5. Compute the watershed transform of the modified segmentation function.

5.对修改后的分割函数做分水岭变换计算。

Use by Matlab Image Processing Toolbox

使用MATLAB图像处理工具箱

注:期间用到了很多图像处理工具箱的函数,例如fspecial、imfilter、watershed、label2rgb、imopen、imclose、imreconstruct、imcomplement、imregionalmax、bwareaopen、graythresh和imimposemin函数等。

2 步骤

Step 1: Read in the Color Image and Convert it to Grayscale

第一步:读入彩色图像,将其转化成灰度图像

clc; clear all; close all;

rgb = imread('pears.png');

if ndims(rgb) == 3

I = rgb2gray(rgb);

else

I = rgb;

end

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(rgb); title('原图');

subplot(1, 2, 2); imshow(I); title('灰度图');

Step 2: Use the Gradient Magnitude as the Segmentation Function

第2步:将梯度幅值作为分割函数

Use the Sobel edge masks, imfilter, and some simple arithmetic to compute the gradient magnitude. The gradient is high at the borders of the objects and low (mostly) inside the objects.

使用Sobel边缘算子对图像进行水平和垂直方向的滤波,然后求取模值,sobel算子滤波后的图像在边界处会显示比较大的值,在没有边界处的值会很小。

hy = fspecial('sobel');

hx = hy';

Iy = imfilter(double(I), hy, 'replicate');

Ix = imfilter(double(I), hx, 'replicate');

gradmag = sqrt(Ix.^2 + Iy.^2);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(I,[]), title('灰度图像')

subplot(1, 2, 2); imshow(gradmag,[]), title('梯度幅值图像')

Can you segment the image by using the watershed transform directly on the gradient magnitude?

可否直接对梯度幅值图像使用分水岭算法?

L = watershed(gradmag);

Lrgb = label2rgb(L);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(gradmag,[]), title('梯度幅值图像')

subplot(1, 2, 2); imshow(Lrgb); title('梯度幅值做分水岭变换')

No. Without additional preprocessing such as the marker computations below, using the watershed transform directly often results in "oversegmentation."

直接使用梯度模值图像进行分水岭算法得到的结果往往会存在过度分割的现象。因此通常需要分别对前景对象和背景对象进行标记,以获得更好的分割效果。

Step 3: Mark the Foreground Objects

第3步:标记前景对象

A variety of procedures could be applied here to find the foreground markers, which must be connected blobs of pixels inside each of the foreground objects. In this example you'll use morphological techniques called "opening-by-reconstruction" and "closing-by-reconstruction" to "clean" up the image. These operations will create flat maxima inside each object that can be located using imregionalmax.

有多种方法可以应用在这里来获得前景标记,这些标记必须是前景对象内部的连接斑点像素。这个例子中,将使用形态学技术“基于开的重建”和“基于闭的重建”来清理图像。这些操作将会在每个对象内部创建单位极大值,使得可以使用imregionalmax来定位。

开运算和闭运算:先腐蚀后膨胀称为开;先膨胀后腐蚀称为闭。开和闭这两种运算可以除去比结构元素小的特定图像细节,同时保证不产生全局几何失真。开运算可以把比结构元素小的突刺滤掉,切断细长搭接而起到分离作用;闭运算可以把比结构元素小的缺口或孔填充上,搭接短的间隔而起到连接作用。

Opening is an erosion followed by a dilation, while opening-by-reconstruction is an erosion followed by a morphological reconstruction. Let's compare the two. First, compute the opening using imopen.

开操作是腐蚀后膨胀,基于开的重建(基于重建的开操作)是腐蚀后进行形态学重建。下面比较这两种方式。首先,用imopen做开操作。

se = strel('disk', 20);

Io = imopen(I, se);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(I, []); title('灰度图像');

subplot(1, 2, 2); imshow(Io), title('图像开操作')

Next compute the opening-by-reconstruction using imerode and imreconstruct.

接下来,通过腐蚀后重建来做基于开的重建计算。

Ie = imerode(I, se);

Iobr = imreconstruct(Ie, I);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(I, []); title('灰度图像');

subplot(1, 2, 2); imshow(Iobr, []), title('基于开的重建图像')

Following the opening with a closing can remove the dark spots and stem marks. Compare a regular morphological closing with a closing-by-reconstruction. First try imclose:

开操作后,接着进行闭操作,可以移除较暗的斑点和枝干标记。对比常规的形态学闭操作和基于闭的重建操作。首先,使用imclose:

Ioc = imclose(Io, se);

Ic = imclose(I, se);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(I, []); title('灰度图像');

subplot(2, 2, 2); imshow(Io, []); title('开操作图像');

subplot(2, 2, 3); imshow(Ic, []); title('闭操作图像');

subplot(2, 2, 4); imshow(Ioc, []), title('开闭操作');

Now use imdilate followed by imreconstruct. Notice you must complement the image inputs and output of imreconstruct. IM2 = imcomplement(IM) computes the complement(补集) of the image IM. IM can be a binary, intensity, or RGB image. IM2 has the same class and size as IM.

现在使用imdilate,然后使用imreconstruct。注意必须对输入图像求补,对imreconstruct输出图像求补。IM2 = imcomplement(IM)计算图像IM的补集。IM可以是二值图像,或者RGB图像。IM2与IM有着相同的数据类型和大小。

Iobrd = imdilate(Iobr, se);

Iobrcbr = imreconstruct(imcomplement(Iobrd), imcomplement(Iobr));

Iobrcbr = imcomplement(Iobrcbr);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(I, []); title('灰度图像');

subplot(2, 2, 2); imshow(Ioc, []); title('开闭操作');

subplot(2, 2, 3); imshow(Iobr, []); title('基于开的重建图像');

subplot(2, 2, 4); imshow(Iobrcbr, []), title('基于闭的重建图像');

As you can see by comparing Iobrcbr with Ioc, reconstruction-based opening and closing are more effective than standard opening and closing at removing small blemishes without affecting the overall shapes of the objects. Calculate the regional maxima of Iobrcbr to obtain good foreground markers.

通过比较Iobrcbr和loc可以看到,在移除小污点同时不影响对象全局形状的应用下,基于重建的开闭操作要比标准的开闭重建更加有效。计算Iobrcbr的局部极大来得到更好的前景标记。

fgm = imregionalmax(Iobrcbr);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 3, 1); imshow(I, []); title('灰度图像');

subplot(1, 3, 2); imshow(Iobrcbr, []); title('基于重建的开闭操作');

subplot(1, 3, 3); imshow(fgm, []); title('局部极大图像');

To help interpret the result, superimpose(叠加) the foreground marker image on the original image.

为了帮助理解这个结果,叠加前景标记到原图上。

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

It1(fgm) = 255; It2(fgm) = 0; It3(fgm) = 0;

I2 = cat(3, It1, It2, It3);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(rgb, []); title('原图像');

subplot(2, 2, 2); imshow(Iobrcbr, []); title('基于重建的开闭操作');

subplot(2, 2, 3); imshow(fgm, []); title('局部极大图像');

subplot(2, 2, 4); imshow(I2); title('局部极大叠加到原图像');

Notice that some of the mostly-occluded and shadowed objects are not marked, which means that these objects will not be segmented properly in the end result. Also, the foreground markers in some objects go right up to the objects' edge. That means you should clean the edges of the marker blobs and then shrink them a bit. You can do this by a closing followed by an erosion.

注意到大多闭塞处和阴影对象没有被标记,这就意味着这些对象在结果中将不会得到合理的分割。而且,一些对象的前景标记会一直到对象的边缘。这就意味着应该清理标记斑点的边缘,然后收缩它们。可以通过闭操作和腐蚀操作来完成。

se2 = strel(ones(5,5));

fgm2 = imclose(fgm, se2);

fgm3 = imerode(fgm2, se2);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(Iobrcbr, []); title('基于重建的开闭操作');

subplot(2, 2, 2); imshow(fgm, []); title('局部极大图像');

subplot(2, 2, 3); imshow(fgm2, []); title('闭操作');

subplot(2, 2, 4); imshow(fgm3, []); title('腐蚀操作');

This procedure tends to leave some stray isolated pixels that must be removed. You can do this using bwareaopen, which removes all blobs that have fewer than a certain number of pixels. BW2 = bwareaopen(BW,P) removes from a binary image all connected components (objects) that have fewer than P pixels, producing another binary image, BW2.

这个过程将会留下一些偏离的孤立像素,应该移除它们。可以使用bwareaopen,用来移除少于特定像素个数的斑点。BW2 = bwareaopen(BW,P)从二值图像中移除所以少于P像素值的连通块,得到另外的二值图像BW2。

fgm4 = bwareaopen(fgm3, 20);

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

It1(fgm4) = 255; It2(fgm4) = 0; It3(fgm4) = 0;

I3 = cat(3, It1, It2, It3);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(I2, []); title('局部极大叠加到原图像');

subplot(2, 2, 2); imshow(fgm3, []); title('闭腐蚀操作');

subplot(2, 2, 3); imshow(fgm4, []); title('去除小斑点操作');

subplot(2, 2, 4); imshow(I3, []); title('修改局部极大叠加到原图像');

Step 4: Compute Background Markers

Now you need to mark the background. In the cleaned-up image, Iobrcbr, the dark pixels belong to the background, so you could start with a thresholding operation.

第4步:计算背景标记

现在,需要标记背景。在清理后的图像Iobrcbr中,暗像素属于背景,所以可以从阈值操作开始。

bw = im2bw(Iobrcbr, graythresh(Iobrcbr));

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(Iobrcbr, []); title('基于重建的开闭操作');

subplot(1, 2, 2); imshow(bw, []); title('阈值分割');

The background pixels are in black, but ideally we don't want the background markers to be too close to the edges of the objects we are trying to segment. We'll "thin" the background by computing the "skeleton by influence zones", or SKIZ, of the foreground of bw. This can be done by computing the watershed transform of the distance transform of bw, and then looking for the watershed ridge lines (DL == 0) of the result. D = bwdist(BW) computes the Euclidean distance transform of the binary image BW. For each pixel in BW, the distance transform assigns a number that is the distance between that pixel and the nearest nonzero pixel of BW. bwdist uses the Euclidean distance metric by default. BW can have any dimension. D is the same size as BW.

背景像素在黑色区域,但是理想情形下,不必要求背景标记太接近于要分割的对象边缘。通过计算“骨架影响范围”来“细化”背景,或者SKIZ,bw的前景。这个可以通过计算bw的距离变换的分水岭变换来实现,然后寻找结果的分水岭脊线(DL==0)。D = bwdist(BW)计算二值图像BW的欧几里得矩阵。对BW的每一个像素,距离变换指定像素和最近的BW非零像素的距离。bwdist默认使用欧几里得距离公式。BW可以由任意维数,D与BW有同样的大小。

D = bwdist(bw);

DL = watershed(D);

bgm = DL == 0;

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(Iobrcbr, []); title('基于重建的开闭操作');

subplot(2, 2, 2); imshow(bw, []); title('阈值分割');

subplot(2, 2, 3); imshow(label2rgb(DL), []); title('分水岭变换示意图');

subplot(2, 2, 4); imshow(bgm, []); title('分水岭变换脊线图');

Step 5: Compute the Watershed Transform of the Segmentation Function.

The function imimposemin can be used to modify an image so that it has regional minima only in certain desired locations. Here you can use imimposemin to modify the gradient magnitude image so that its only regional minima occur at foreground and background marker pixels.

第5步:计算分割函数的分水岭变换

函数imimposemin可以用来修改图像,使其只是在特定的要求位置有局部极小。这里可以使用imimposemin来修改梯度幅值图像,使其只在前景和后景标记像素有局部极小。

gradmag2 = imimposemin(gradmag, bgm | fgm4);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(2, 2, 1); imshow(bgm, []); title('分水岭变换脊线图');

subplot(2, 2, 2); imshow(fgm4, []); title('前景标记');

subplot(2, 2, 3); imshow(gradmag, []); title('梯度幅值图像');

subplot(2, 2, 4); imshow(gradmag2, []); title('修改梯度幅值图像');

Finally we are ready to compute the watershed-based segmentation.

最后,可以做基于分水岭的图像分割计算。

Step 6: Visualize the Result

One visualization technique is to superimpose the foreground markers, background markers, and segmented object boundaries on the original image. You can use dilation as needed to make certain aspects, such as the object boundaries, more visible. Object boundaries are located where L == 0.

第6步:查看结果

一个可视化技术是叠加前景标记、背景标记、分割对象边界到初始图像。可以使用膨胀来实现某些要求,比如对象边界,更加清晰可见。对象边界定位于L==0的位置。

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

fgm5 = imdilate(L == 0, ones(3, 3)) | bgm | fgm4;

It1(fgm5) = 255; It2(fgm5) = 0; It3(fgm5) = 0;

I4 = cat(3, It1, It2, It3);

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(rgb, []); title('原图像');

subplot(1, 2, 2); imshow(I4, []); title('标记和对象边缘叠加到原图像');

This visualization illustrates how the locations of the foreground and background markers affect the result. In a couple of locations, partially occluded darker objects were merged with their brighter neighbor objects because the occluded objects did not have foreground markers.

可视化说明了前景和后景标记如何影响结果。在几个位置,部分的较暗对象与它们相邻的较亮的邻接对象相融合,这是因为受遮挡的对象没有前景标记。

Another useful visualization technique is to display the label matrix as a color image. Label matrices, such as those produced by watershed and bwlabel, can be converted to truecolor images for visualization purposes by using label2rgb.

另外一个有用的可视化技术是将标记矩阵作为彩色图像进行显示。标记矩阵,比如通过watershed和bwlabel得到的,可以使用label2rgb转换到真彩图像来显示。

Lrgb = label2rgb(L, 'jet', 'w', 'shuffle');

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(rgb, []); title('原图像');

subplot(1, 2, 2); imshow(Lrgb); title('彩色分水岭标记矩阵');

You can use transparency to superimpose this pseudo-color label matrix on top of the original intensity image.

可以使用透明度来叠加这个伪彩色标记矩阵在原亮度图像上进行显示。

figure('units', 'normalized', 'position', [0 0 1 1]);

subplot(1, 2, 1); imshow(rgb, []); title('原图像');

subplot(1, 2, 2); imshow(rgb, []); hold on;

himage = imshow(Lrgb);

set(himage, 'AlphaData', 0.3);

title('标记矩阵叠加到原图像');

参考:http://blueben-chong.blog.sohu.com/141881444.html

总结

代码:

clc; clear all; close all;

rgb = imread('pears.png');

if ndims(rgb) == 3

I = rgb2gray(rgb);

else

I = rgb;

end

hy = fspecial('sobel');

hx = hy';

Iy = imfilter(double(I), hy, 'replicate');

Ix = imfilter(double(I), hx, 'replicate');

gradmag = sqrt(Ix.^2 + Iy.^2);

L = watershed(gradmag);

Lrgb = label2rgb(L);

se = strel('disk', 20);

Io = imopen(I, se);

Ie = imerode(I, se);

Iobr = imreconstruct(Ie, I);

Ioc = imclose(Io, se);

Iobrd = imdilate(Iobr, se);

Iobrcbr = imreconstruct(imcomplement(Iobrd), imcomplement(Iobr));

Iobrcbr = imcomplement(Iobrcbr);

fgm = imregionalmax(Iobrcbr);

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

It1(fgm) = 255; It2(fgm) = 0; It3(fgm) = 0;

I2 = cat(3, It1, It2, It3);

se2 = strel(ones(5,5));

fgm2 = imclose(fgm, se2);

fgm3 = imerode(fgm2, se2);

fgm4 = bwareaopen(fgm3, 20);

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

It1(fgm4) = 255; It2(fgm4) = 0; It3(fgm4) = 0;

I3 = cat(3, It1, It2, It3);

bw = im2bw(Iobrcbr, graythresh(Iobrcbr));

D = bwdist(bw);

DL = watershed(D);

bgm = DL == 0;

gradmag2 = imimposemin(gradmag, bgm | fgm4);

L = watershed(gradmag2);

It1 = rgb(:, :, 1);

It2 = rgb(:, :, 2);

It3 = rgb(:, :, 3);

fgm5 = imdilate(L == 0, ones(3, 3)) | bgm | fgm4;

It1(fgm5) = 255; It2(fgm5) = 0; It3(fgm5) = 0;

I4 = cat(3, It1, It2, It3);

Lrgb = label2rgb(L, 'jet', 'w', 'shuffle');

Matlab的标记分水岭分割算法的更多相关文章

  1. [ZZ] 基于Matlab的标记分水岭分割算法

    基于Matlab的标记分水岭分割算法 http://blog.sina.com.cn/s/blog_725866260100rz7x.html 1 综述 Separating touching obj ...

  2. 基于Matlab的标记分水岭分割算法

    转自:http://blog.sina.com.cn/lyqmath 1 综述 Separating touching objects in an image is one of the more d ...

  3. 基于标记的分水岭分割算法/OpenCV中距离变换

    Opencv分水岭算法——watershed自动图像分割用法 OpenCV距离变换distanceTransform应用 图像分割作为图像识别的基础,在图像处理中占有重要地位,通常需要在进行图像分割算 ...

  4. 分水岭分割算法(watershed segmentation)的C++实现(法2)

    运行环境:ubuntu16.04+Qt+opencv2.4.13.3 watershed.cpp #include "opencv2/imgproc/imgproc.hpp" #i ...

  5. 分水岭分割算法(watershed segmentation)的C++实现(法1)

    运行环境:ubuntu16.04+Qt+opencv2.4.13 参考链接:http://blog.csdn.net/u010741471/article/details/45193521 water ...

  6. 利用NVIDIA-NGC中的MATLAB容器加速语义分割

    利用NVIDIA-NGC中的MATLAB容器加速语义分割 Speeding Up Semantic Segmentation Using MATLAB Container from NVIDIA NG ...

  7. [迷宫中的算法实践]迷宫生成算法——递归分割算法

    Recursive division method        Mazes can be created with recursive division, an algorithm which wo ...

  8. 从Random Walk谈到Bacterial foraging optimization algorithm(BFOA),再谈到Ramdom Walk Graph Segmentation图分割算法

    1. 从细菌的趋化性谈起 0x1:物质化学浓度梯度 类似于概率分布中概率密度的概念.在溶液中存在不同的浓度区域. 如放一颗糖在水盆里,糖慢慢溶于水,糖附近的水含糖量比远离糖的水含糖量要高,也就是糖附近 ...

  9. CVPR目标检测与实例分割算法解析:FCOS(2019),Mask R-CNN(2019),PolarMask(2020)

    CVPR目标检测与实例分割算法解析:FCOS(2019),Mask R-CNN(2019),PolarMask(2020)1. 目标检测:FCOS(CVPR 2019)目标检测算法FCOS(FCOS: ...

随机推荐

  1. 【Go入门教程5】面向对象(method、指针作为receiver、method继承、method重写)

    前面两章我们介绍了函数和struct,那你是否想过函数当作struct的字段一样来处理呢?今天我们就讲解一下函数的另一种形态,带有接收者(receiver)的函数,我们称为method method ...

  2. javascript数据结构-介绍

    github博客地址 名词解释 数据结构是计算机存储.组织数据的方式.数据结构是指相互之间存在一种或多种特定关系的数据元素的集合.通常情况下,精心选择的数据结构可以带来更高的运行或者存储效率.数据结构 ...

  3. linux常用命令-文件搜索命令-find

    find [目录] [选项] 文件名或者正则表达式 -name 根据文件名搜索 -iname 搜索文件名的时候忽略大小写 例:find /etc -name init     find /etc -i ...

  4. python 字典的函数

    clear(),清空 注意单纯的赋值就相当于c语言中引用,只事额外起了一个别名,所以他们指向相同的地址, 所以令c={},只是另外开辟了一个新的空间让c为空,并没有改变之前的空间,所以{}与clear ...

  5. 【krpano】krpano xml资源解密(破解)软件说明与下载

    欢迎加入qq群551278936讨论krpano技术以及获取最新软件.   最新版本软件下载:http://www.cnblogs.com/reachteam/p/5455675.html 该软件已经 ...

  6. Webdriver配合Tesseract-OCR 自动识别简单的验证码

    验证码: 如下,在进行自动化测试,遇到验证码的问题,一般有两种方式 1.找开发去掉验证码或者使用万能验证码 2.使用OCR自动识别 使用OCR自动化识别,一般识别率不是太高,处理一般简单验证码还是没问 ...

  7. CDN -- 集合

    weui https://cdnjs.cloudflare.com/ajax/libs/weui/0.4.3/style/weui.min.css 百度静态资源库 http://cdn.code.ba ...

  8. 了解Solr6.1结构及实现原理

    Solr是一个高性能,采用Java5开发,基于Lucene的全文搜索服务器.同时对其进行了扩展,提供了比Lucene更为丰富的查询语言,同时实现了可配置.可扩展并对查询性能进行了优化,并且提供了一个完 ...

  9. 【MongoDB】递归获取字段更新表达式,更新复杂数据类型对象

    在实际更新Mongo对象时发现,原有的更新代码无法更新复杂的数据类型对象.恰好看到张占岭老师有对该方法做相关的改进,因此全抄了下来. 总的核心思想就是运用反射与递归,对对象属性一层一层挖掘下去,循环创 ...

  10. 【Javascript】解决Ajax轮询造成的线程阻塞问题(过渡方案)

    一.背景 开发Web平台时,经常会需要定时向服务器轮询获取数据状态,并且通常不仅只开一个轮询,而是根据业务需要会产生数个轮询.这种情况下,性能低下的Ajax长轮询已经不能满足需求,频繁的访问还会造成线 ...